Corexy

[Sa6k0]

Hello is it possible to setup grbl so it can run core XY as it is one of the reasons to move to 32 bit.
If it isnt what would be the best alternative for 32bit core XY.
Also it seems that the cocox ide is gone.
Thank you!

[misan]

COREXY is supported in 8-bit grbl too.

…

On Sun, Feb 10, 2019 at 2:55 PM Sa6k0 ***@***.***> wrote: Hello is it possible to setup grbl so it can run core XY as it is one of the reasons to move to 32 bit. If it isnt what would be the best alternative for 32bit core XY. Also it seems that the cocox ide is gone. Thank you! — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#65>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AAccyCDvmg-wRu_Twhv6HV52Uhjgrux1ks5vMCTKgaJpZM4azEaJ> .

[Sa6k0]

I know but I would like to setup grlb on STM32F103 for corexy.
How would I do this?

[misan]

You just uncomment this line: https://github.com/usbcnc/grbl/blob/edge/grbl/config.h#L198

…

On Sun, Feb 10, 2019 at 8:51 PM Sa6k0 ***@***.***> wrote: I know but I would like to setup grlb on STM32F103 for corexy. How would I do this? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#65 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AAccyBKsNCjPgPpHbaTRMhN4w5QzHZuXks5vMHhLgaJpZM4azEaJ> .

[Sa6k0]

Did that but I get an avr/io.h: No such file or directory error even when not running corexy.
I am compiling with the arduino ide.

[robomechs]

Did you really try to compile coide project with arduino ide?

[Sa6k0]

I did because the coocox one is gone.

[robomechs]

I've moved this project to the atollic truestudio with some changes. https://github.com/yaroslavVl/6-AXIS-USBCNC-GRBL

[Alfrederson]

I tried to compiled this in Platformio but I have no idea how to make a config for it based on the Atollic project files. I compiled it with no issue in Atollic, but sooner or later it will be gone too