Frigate LXC container without Docker #2711
-
|
I've just managed to create a "script" with which you should be able to create a fully working Frigate LXC container, without Docker. I've described the process here: @tteck Would you be willing to accept this as a "Proxmox Helper Script"? Thanks! |
Beta Was this translation helpful? Give feedback.
Replies: 54 comments 169 replies
-
|
test |
Beta Was this translation helpful? Give feedback.
-
|
Testing... Awwww... an error. Update: I indeed selected Debian 12. |
Beta Was this translation helpful? Give feedback.
-
|
Debian 11, for now. |
Beta Was this translation helpful? Give feedback.
-
|
Also, use privileged. |
Beta Was this translation helpful? Give feedback.
-
|
I see you chose the "clean way". Nice! |
Beta Was this translation helpful? Give feedback.
-
|
Again an error, later on in the process... |
Beta Was this translation helpful? Give feedback.
-
|
I just installed it, again (testing)
|
Beta Was this translation helpful? Give feedback.
-
|
Sorry.. I reduced disk-space to 4gb. (doh) |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
I wonder what i did wrong this time.. Again an error, but the script continues to run: Dmesg: |
Beta Was this translation helpful? Give feedback.
-
|
This time the script ran without any errors.. The Frigate web ui is not directly working. In the browser-console: Maybe small optimization is to remove the installation file: |
Beta Was this translation helpful? Give feedback.
-
|
The default sample "car-stopping.mp4" file is nowhere to be found on internet. So i use a different sample file... (dunno about legal stuff) Other error: Maybe also in /config/config.yml to disable mqtt by default: Not a problem, just an observation... Reboot of container takes longer than normal. Probably caused by the running services. Next errors: Maybe? |
Beta Was this translation helpful? Give feedback.
-
|
Got rid of the left-over zip file 90463f5 The Proxmox/install/frigate-install.sh Line 71 in 90463f5 It's still a work in progress 😉 |
Beta Was this translation helpful? Give feedback.
-
|
I know. Your work is much appreaciated. I am very willing to help. |
Beta Was this translation helpful? Give feedback.
-
|
@GrumpyMeow I incorporated the changes that you recommended. 6e3e493 |
Beta Was this translation helpful? Give feedback.
-
|
I personally don't use Frigate, but there have been numerous requests for a version that doesn't require Docker. While I can't confirm its efficacy or even if it works correctly, this version leverages hardware acceleration, USB passthrough, Coral drivers, TensorFlow, FFmpeg, and more—all without Docker. |
Beta Was this translation helpful? Give feedback.
-
|
I’ve tried so many of NVR software, none of them were perfect: Shinobi, Viseron, AgentDvr. These apps have some nice features which I miss in Frigate. But Frigate does it’s job without nag-screens or counter-intuitive configs. I’ve decided upon to stick with Frigate. |
Beta Was this translation helpful? Give feedback.
-
I ran the script in shell proxmox with advanced option.
rest of configuration as in the script If you need any logs then please post me where to get them, Edit one more time: |
Beta Was this translation helpful? Give feedback.
-
|
Does the menu-options "Config" and "Logs" work for you? I got many errors in the browser-console. And also no output at the logs. |
Beta Was this translation helpful? Give feedback.
-
|
After some time, he returns to the spinning wheel. |
Beta Was this translation helpful? Give feedback.
-
|
i tried the installation but i'vr got, debian 11 and privileged
[ERROR] in line 57: exit code 0: while executing command sleep 0.1 |
Beta Was this translation helpful? Give feedback.
-
|
im not able to get running frigate with plus_api_key in the environment_vars:, as soon as i put the |
Beta Was this translation helpful? Give feedback.
-
|
From the Frigate website: Can you try to add “lxc.environment: plus_api_key=xxxx” to the configuration file of the LXC container? (/etc/pve/lxc/xxx.conf) A nice-to-have is: to have an entry field as part of the helper-script. |
Beta Was this translation helpful? Give feedback.
-
|
i've tried |
Beta Was this translation helpful? Give feedback.
-
|
Environment variables should be set inside the Frigate systemd service. See https://serverfault.com/questions/413397/how-to-set-environment-variable-in-systemd-service |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
Logs are fixed 6dcc29a |
Beta Was this translation helpful? Give feedback.
-
|
It works, thanks!!!, now the only thing is the environmet parameters and will be ok |
Beta Was this translation helpful? Give feedback.
-
|
Have you tried |
Beta Was this translation helpful? Give feedback.
-
(add your key) That may work 🤷🏻♂️ |
Beta Was this translation helpful? Give feedback.
-
|
doesnt work |
Beta Was this translation helpful? Give feedback.
-
|
Did you reboot? |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
yes
…On Mon, Apr 1, 2024 at 9:07 PM tteckster ***@***.***> wrote:
Did you reboot?
—
Reply to this email directly, view it on GitHub
<#2711 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALECS4QWXMKIU6E5W3A7MX3Y3GV5VAVCNFSM6AAAAABFNOVS2OVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DSNZVHAZDC>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Well, I guess we'll see if it is functioning well enough. 🤞🏻 Adding to the website. |
Beta Was this translation helpful? Give feedback.
-
|
Awesome stuff. Regarding the log files, Frigate stores them in |
Beta Was this translation helpful? Give feedback.
-
|
Thanks tteck, I tested the script tonight and it worked straight away. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
How do you determine that the gid was 104 and mode 0666? What additional configuration did you make to the container for the coral TPU? |
Beta Was this translation helpful? Give feedback.
-
|
Proxmox Host for gid: For Apex was 104 wrong, 1000 is ok for me. Proxmox Host: reboot Proxmox |
Beta Was this translation helpful? Give feedback.
-
|
Hi, installed the frigate lxc yesterday, so I guess I used the latest script available at the moment. I got this error message, which is already mentioned before, but everything seem to work ok: I use proxmox 8.2. |
Beta Was this translation helpful? Give feedback.
-
|
That is caused by the spinner. I'm still chasing this gremlin. |
Beta Was this translation helpful? Give feedback.
-
|
Does this have any influence on proper functioning? |
Beta Was this translation helpful? Give feedback.
-
|
by the way, congratulations on the new site https://helper-scripts.com/ |
Beta Was this translation helpful? Give feedback.
-
|
It works ok for me the last couple of days. I can see some errors in the logs which seem opencl (I use the openvino model via igpu) but I am not sure if it's the script or frigate at fault. I will investigate and post again in the coming days. |
Beta Was this translation helpful? Give feedback.
-
|
Should the "Docker Compose UP" be included in the bootup? At the moment it seems after I start the LXC I need to run "Docker compose up -detach" manually |
Beta Was this translation helpful? Give feedback.
-
|
Where do you see "Docker Compose UP" in the instructions? There is no Docker or Docker Compose involved. |
Beta Was this translation helpful? Give feedback.
-
|
I noticed some errors in the nginx logs. When starting: When opening the config page: |
Beta Was this translation helpful? Give feedback.
-
|
Good morning, I finally took the plunge and have just migrated from "Frigate Docker/LXC" to "Frigate LXC" (which I installed a few days ago) and everything is working correctly for the moment, thank you TTeck: ) For the moment, I don't see any difference in performance, it's still very good (I have a Coral TPU USB) Questions : 1) I also got the error message during the installation, does this have an impact somewhere or should I forget it? 2) Since version 0.13.0 access to the Go2RTC API is disabled by default:
However, with this version of Frigate LXC, access to Go2RTC is activated by default, how can you deactivate/activate it if you are not using it in order to secure local flows (there is no identification for Go2RTC )? Do you just have to create a rule with the firewall with the proxmox graphical interface on the LXC container (in, reject, etc...) and if so do you have an example? thanks again |
Beta Was this translation helpful? Give feedback.
-
|
You can stop the go2rtc service if you don't use it |
Beta Was this translation helpful? Give feedback.
-
|
I use it with frigate |
Beta Was this translation helpful? Give feedback.
-
|
Please tell how to setup Coral USB? |
Beta Was this translation helpful? Give feedback.
-
|
There is a problem with OpenVINO in frigate on proxmox with kernel 6.8. Rolling back to kernel 6.5 restores functionality. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Yes thank you. I have already rolled back the kernel with this script. Very convenient script. I wrote in the topic for information. I couldn't figure out what the problem was all day today. |
Beta Was this translation helpful? Give feedback.
-
Hi @zzz676 @tteck Is there a solution/workaround without change/downgrade the Proxmox Kernel? I see this and this workaround |
Beta Was this translation helpful? Give feedback.
-
|
Good morning, Go2RTC 1.9.2 has just been released, how to update it? By relaunching the script on the container, it does not offer an update. I found this, but it's for the LXC Go2RTC container only, on the Frigate LXC Container, Go2RTC doesn't seem to be installed in the same place. THANKS |
Beta Was this translation helpful? Give feedback.
-
|
Indeed after renaming the file, it's much better :) |
Beta Was this translation helpful? Give feedback.
-
|
To update the go2rtc install in frigate LXC, you need to do this: or run this inside inside your container (my fork has the update script for all components): |
Beta Was this translation helpful? Give feedback.
-
|
Thanks, but I updated Go2RTC like this and I had no problem, it is in version 1.9.2 I will try your method next time ;) |
Beta Was this translation helpful? Give feedback.
-
@remz1337 your fork does not work on the latest version of proxmox |
Beta Was this translation helpful? Give feedback.
-
|
Yep I’m aware of that, just haven’t had the time to upgrade. Feel free to contribute ;) |
Beta Was this translation helpful? Give feedback.
-
|
Has anyone successfully gotten frigate lxc working with a supported nvidia gpu for both decoding and also object detection? I quickly got frigate lxc running to test and now want to setup another frigatelxc container and get the nvidia gpu working with it. I have been reading documentation that is scattered and am uncertain how to proceed to get nvidia working with this roll out of frigate lxc. In the frigate docs on page https://docs.frigate.video/configuration/object_detectors it identifies: What would be the steps to get the tensorrt image or the TensorRT libraries working with frigatelxc or through any other means? Thank you |
Beta Was this translation helpful? Give feedback.
-
|
Is it the exact same driver version has the host? Also, not sure where you got your config from, but it should be cgroup2, not cgroup. |
Beta Was this translation helpful? Give feedback.
-
yes driver it's the same version.
You are right, cgroup it's deprecated. |
Beta Was this translation helpful? Give feedback.
-
|
Made a new attempt and found a couple of issue, "add-apt-repository" does not exist in the container. This seem to work: testing right now. Nicola |
Beta Was this translation helpful? Give feedback.
-
|
found also that the right package for cudnn is cudnn9 |
Beta Was this translation helpful? Give feedback.
-
|
Found this error during TensorRT installation: It' realted to the patched external dependencies, you vhere writing before? |
Beta Was this translation helpful? Give feedback.
-
|
I am running the lxc with a coral tpu, usb version. Is it normal to get this log? I mean, I was using openVINO as a detector before switching to coral a couple of days back. Is it normal to get this openCV exception now with coral? When I was using openVINO for detection, I was getting numerous crashes like this, because of the known bug with proxmox 6.8 kernel. |
Beta Was this translation helpful? Give feedback.
-
|
I just noticed that in recent days I have the same kind of error and yet I have never used OpenVIMO, I have been using a Coral USB since the beginning. For information, the camera in question "garage.atelier" is connected via WIFI unlike the 8 others and I already had similar errors regularly with DockerLXC/Frigate, but no Opencv error. |
Beta Was this translation helpful? Give feedback.
-
|
Guys, how do you setup Coral USB? |
Beta Was this translation helpful? Give feedback.
-
|
Question why is go2rtc is installed with Frigate? wtf |
Beta Was this translation helpful? Give feedback.
-
|
Yes you can have your go2rtc service in a separate LXC. It has been done that way to follow the official frigate docker image. If you are an advanced user, feel free to manually remove it from the Frigate LXC after the installation script completes and move it somewhere else. |
Beta Was this translation helpful? Give feedback.
-
|
Here I got this error during installation: LOG: I'll check if it's working normally |
Beta Was this translation helpful? Give feedback.
-
|
Pretty clear error: disk is full. What’s your config? |
Beta Was this translation helpful? Give feedback.
-
|
Crappy. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, |
Beta Was this translation helpful? Give feedback.
-
|
You need a privileged lxc for nfs or smb, afaik. |
Beta Was this translation helpful? Give feedback.
-
|
No, you can share a smb share from the host to the unprivileged LXC |
Beta Was this translation helpful? Give feedback.
-
|
You can mount it in the pve fstab then bind mounted it to the lxc |
Beta Was this translation helpful? Give feedback.
-
|
I can mount the share to the container, but I don't know how to "instruct" frigate to use this folder |
Beta Was this translation helpful? Give feedback.
-
|
You mount it to /media/frigate in the lxc |
Beta Was this translation helpful? Give feedback.
-
|
This works great for me out of the box, with the exception of streams added to go2rtc not persisting after restart. Tried updating /dev/shm/go2rtc.yaml but changes still don't persist. It's an RTMP stream. No issues with standalone go2rtc container. Anyone else having the same issue? |
Beta Was this translation helpful? Give feedback.
-
|
This is not a script issue, please read the frigate documentation. You need to define the go2rtc stream in the frigate config: |
Beta Was this translation helpful? Give feedback.
-
|
Thank you! That resolved the issue. |
Beta Was this translation helpful? Give feedback.
-
|
Is it possible to add a branch with beta install, upgrade? |
Beta Was this translation helpful? Give feedback.
-
|
yes please! an option in the script to offer to do beta release or stable release so that way users have a choice. this new beta update seems like it has some great new changes and id love to try it out. |
Beta Was this translation helpful? Give feedback.
-
|
I get crashes every 2-3 days or so, probably because of memory leak. I have a usb coral, but I don't think it's because of usb disconnection. My coral tpu seems steady. On the other hand I see memory usage constantly getting higher and higher and even 4GB allocated to the lxc seem not enough. |
Beta Was this translation helpful? Give feedback.
and others
test