SmartGrid Support

[tobiby]

Checklist

• I have filled out the template to the best of my ability.
• This only contains 1 feature request (if you have multiple feature requests, open one feature request for each feature request).
• This issue is not a duplicate feature request of previous feature requests.

Is your feature request related to a problem? Please describe.

The S10 mini offers the possibility to control a heat pump via two switches (SmartGrid). It would be nice if it were possible to read out the status of this switches in the Home Assistant, as this would allow you to recognize whether there is a certain amount of excess power and thus switch on consumers

Describe the solution you'd like

Instead of transferring the status of each individual switch, it might be possible to translate the status of the switches directly into the associated SmartGrid states.
State 1 - Blocked operation (1:0): Operation for the heat pump is blocked for a maximum of two hours per day.
State 2 - Normal operation (0:0): The heat pump runs in energy-efficient normal operation.
State 3 - Switch-on recommendation (0:1): Heat pump operation is stimulated to increase electricity consumption for heating and hot water.
State 4 - Start-up command (1:1): The heat pump is prompted to operate. This state supports two variants, which must be set on the controller for different tariff and usage models:
i) the heat pump is switched on
ii) the heat pump is switched on AND the hot water temperature is increased

Describe alternatives you've considered

Provide the state of the switches (0/1) as two separate entities in the system

Additional context

If python-e3dc is used the function poll_switches() can be used to get the state of the switches

Diagnostics dump

{
"home_assistant": {
"installation_type": "Home Assistant OS",
"version": "2024.3.3",
"dev": false,
"hassio": true,
"virtualenv": false,
"python_version": "3.12.2",
"docker": true,
"arch": "aarch64",
"timezone": "Europe/Berlin",
"os_name": "Linux",
"os_version": "6.1.73-haos-raspi",
"supervisor": "2024.03.1",
"host_os": "Home Assistant OS 12.1",
"docker_version": "24.0.7",
"chassis": "embedded",
"run_as_root": true
},
"custom_components": {
"e3dc_rscp": {
"version": "v3.6.2",
"requirements": [
"pye3dc==0.9.1"
]
},
"homematicip_local": {
"version": "1.58.0",
"requirements": [
"hahomematic==2024.3.1"
]
},
"hacs": {
"version": "1.34.0",
"requirements": [
"aiogithubapi>=22.10.1"
]
}
},
"integration_manifest": {
"domain": "e3dc_rscp",
"name": "E3DC Remote Storage Control Protocol (Git)",
"codeowners": [
"@torbennehmer"
],
"config_flow": true,
"dependencies": [],
"documentation": "https://github.com/torbennehmer/hacs-e3dc",
"homekit": {},
"integration_type": "device",
"iot_class": "cloud_polling",
"issue_tracker": "https://github.com/torbennehmer/hacs-e3dc/issues",
"requirements": [
"pye3dc==0.9.1"
],
"ssdp": [],
"version": "v3.6.2",
"zeroconf": [],
"is_built_in": false
},
"data": {
"current_data": {
"system-derate-percent": 69.9999988079071,
"system-derate-power": 5544.0,
"system-additional-source-available": false,
"system-battery-installed-capacity": 6526,
"system-battery-installed-peak": 7920,
"system-ac-maxpower": 4600,
"system-battery-charge-max": 1500,
"system-battery-discharge-max": 1500,
"system-mac": "24:",
"model": "S10_Mini",
"system-battery-discharge-minimum-default": 65,
"e3dc_timezone": "Europe/Berlin",
"additional-production": 0,
"autarky": 71.67776489257812,
"battery-charge": 0,
"battery-discharge": 1545,
"battery-netchange": -1545,
"grid-consumption": 570,
"grid-netchange": 570,
"grid-production": 0,
"house-consumption": 2115,
"selfconsumption": 99.9999771118164,
"soc": 81,
"solar-production": 0,
"wallbox-consumption": 0,
"pset-limit-charge": 1500,
"pset-limit-discharge": 1500,
"pset-limit-discharge-minimum": 65,
"pset-limit-enabled": false,
"pset-powersaving-enabled": true,
"pset-weatherregulationenabled": true,
"manual-charge-active": false,
"manual-charge-energy": 0,
"db-day-autarky": 81.6178970336914,
"db-day-battery-charge": 4053.0,
"db-day-battery-discharge": 3682.0,
"db-day-grid-consumption": 1080.5,
"db-day-grid-production": 1127.0,
"db-day-house-consumption": 5878.0,
"db-day-selfconsumption": 80.977294921875,
"db-day-solar-production": 7782.0,
"db-day-startts": 1711929600
},
"get_system_info": {
"deratePercent": 69.9999988079071,
"deratePower": 5544.0,
"externalSourceAvailable": 0,
"installedBatteryCapacity": 6526,
"installedPeakPower": 7920,
"maxAcPower": 4600,
"macAddress": "24:",
"maxBatChargePower": 1500,
"maxBatDischargePower": 1500,
"model": "S10_Mini",
"release": "S10_2023_06",
"serial": "532"
},
"get_system_status": {
"dcdcAlive": true,
"powerMeterAlive": true,
"batteryModuleAlive": true,
"pvModuleAlive": true,
"pvInverterInited": true,
"serverConnectionAlive": true,
"pvDerated": false,
"emsAlive": true,
"acModeBlocked": false,
"sysConfChecked": false,
"emergencyPowerStarted": false,
"emergencyPowerOverride": false,
"wallBoxAlive": false,
"powerSaveEnabled": false,
"chargeIdlePeriodActive": false,
"dischargeIdlePeriodActive": false,
"waitForWeatherBreakthrough": false,
"rescueBatteryEnabled": false,
"emergencyReserveReached": false,
"socSyncRequested": false
},
"get_powermeters": [
{
"index": 6,
"type": 1,
"typeName": "PM_TYPE_ROOT"
}
],
"e3dc_config": {
"powermeters": [
{
"index": 6,
"type": 1,
"typeName": "PM_TYPE_ROOT",
"name": "Root PM",
"key": "root-pm",
"total-state-class": "total",
"negate-measure": false
}
]
},
"poll": {
"autarky": 71.69123840332031,
"consumption": {
"battery": -1545,
"house": 2112,
"wallbox": 0
},
"production": {
"solar": 0,
"add": 0,
"grid": 567
},
"selfConsumption": 99.9999771118164,
"stateOfCharge": 80,
"time": "2024-04-01T19:35:24.000838+00:00"
},
"switches": [
{
"id": 7,
"type": 74,
"name": "SG0",
"status": 48
},
{
"id": 8,
"type": 75,
"name": "SG1",
"status": 48
}
],
"get_pvis_data": [
{
"acMaxApparentPower": 4600.0,
"cosPhi": {
"active": null,
"value": null,
"excited": null
},
"deviceState": {
"connected": true,
"working": true,
"inService": false
},
"frequency": {
"under": null,
"over": null
},
"index": 0,
"lastError": "3 0x0",
"maxPhaseCount": 3,
"maxStringCount": 2,
"onGrid": true,
"phases": {
"0": {
"power": 1429.0,
"voltage": 235.5,
"current": 6.110000133514404,
"apparentPower": 1434.0,
"reactivePower": 0.0,
"energyAll": 14561002.0,
"energyGridConsumption": 3564.0
}
},
"powerMode": 1,
"serialNumber": "E3E",
"state": "0x103f231d",
"strings": {
"0": {
"power": 0.0,
"voltage": 38.0,
"current": 0.0,
"energyAll": 8544629.0
},
"1": {
"power": 0.0,
"voltage": 39.0,
"current": 0.0,
"energyAll": 7318887.0
}
},
"systemMode": 2,
"temperature": {
"max": 130.0,
"min": -30.0,
"values": [
29.399999618530273,
33.099998474121094,
40.70000076293945,
38.70000076293945
]
},
"type": 4,
"version": " MAIN HW0D 2.060",
"voltageMonitoring": {
"thresholdTop": null,
"thresholdBottom": null,
"slopeUp": null,
"slopeDown": null
}
}
],
"get_powermeters_data": [
{
"activePhases": "111",
"energy": {
"L1": -9019446.11,
"L2": 9894991.61,
"L3": -10286008.28
},
"index": 6,
"maxPhasePower": 24000.0,
"mode": 1,
"power": {
"L1": 67.0,
"L2": 1860.0,
"L3": -1360.0
},
"type": 1,
"voltage": {
"L1": 233.83999633789062,
"L2": 232.83999633789062,
"L3": 235.05999755859375
}
}
],
"get_batteries_data": [
{
"asoc": 89.9000015258789,
"chargeCycles": 854,
"current": -28.399999618530273,
"dcbCount": 1,
"dcbs": {
"0": {
"current": -28.399999618530273,
"currentAvg30s": -28.399980545043945,
"cycleCount": 854,
"designCapacity": 126.0,
"designVoltage": 51.79999923706055,
"deviceName": "EM048126P3S",
"endOfDischarge": 44.5,
"error": 0,
"fullChargeCapacity": 126.0,
"fwVersion": 260,
"manufactureDate": 0,
"manufactureName": "LG",
"maxChargeCurrent": 63.0,
"maxChargeTemperature": 45.0,
"maxChargeVoltage": 58.79999923706055,
"maxDischargeCurrent": 63.0,
"minChargeTemperature": -10.0,
"parallelCellCount": 0,
"sensorCount": 2,
"seriesCellCount": 0,
"pcbVersion": 8,
"protocolVersion": 16,
"remainingCapacity": 98.0,
"serialCode": "191",
"serialNo": 1912270797,
"soc": 77.80000305175781,
"soh": 89.9000015258789,
"status": 352,
"temperatures": [
24.399999618530273,
24.5
],
"voltage": 54.5,
"voltageAvg30s": 54.50832748413086,
"voltages": [],
"warning": 0
}
},
"designCapacity": 126.0,
"deviceConnected": true,
"deviceInService": false,
"deviceName": "LG_BAT",
"deviceWorking": true,
"eodVoltage": 41.0,
"errorCode": 0,
"fcc": 126.0,
"index": 0,
"maxBatVoltage": 57.9739990234375,
"maxChargeCurrent": 63.0,
"maxDischargeCurrent": 63.0,
"maxDcbCellTemp": 24.5,
"minDcbCellTemp": 24.399999618530273,
"moduleVoltage": 54.5,
"rc": 98.0,
"readyForShutdown": true,
"rsoc": 80.96992492675781,
"rsocReal": 77.80000305175781,
"statusCode": 0,
"terminalVoltage": 54.5,
"totalUseTime": 0,
"totalDischargeTime": 0,
"trainingMode": 0,
"usuableCapacity": 114.02999877929688,
"usuableRemainingCapacity": 86.02999877929688
}
],
"get_idle_periods": null,
"get_power_settings": {
"dischargeStartPower": 65,
"maxChargePower": 1500,
"maxDischargePower": 1500,
"powerLimitsUsed": false,
"powerSaveEnabled": true,
"weatherForecastMode": 1,
"weatherRegulatedChargeEnabled": true
},
"EMS_REQ_GET_MANUAL_CHARGE": {
"exception": [
"Traceback (most recent call last):\n",
" File "/usr/local/lib/python3.12/site-packages/e3dc/_e3dc_rscp_local.py", line 102, in sendRequest\n receive = self._receive()\n ^^^^^^^^^^^^^^^\n",
" File "/usr/local/lib/python3.12/site-packages/e3dc/_e3dc_rscp_local.py", line 76, in _receive\n decData = rscpDecode(self.encdec.decrypt(data))[0]\n ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^\n",
" File "/usr/local/lib/python3.12/site-packages/e3dc/_rscpLib.py", line 263, in rscpDecode\n return rscpDecode(rscpFrameDecode(data)[0])\n ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^\n",
" File "/usr/local/lib/python3.12/site-packages/e3dc/_rscpLib.py", line 279, in rscpDecode\n innerData, usedLength = rscpDecode(data[curByte:])\n ^^^^^^^^^^^^^^^^^^^^^^^^^^\n",
" File "/usr/local/lib/python3.12/site-packages/e3dc/_rscpLib.py", line 270, in rscpDecode\n strTag = getStrRscpTag(hexTag)\n ^^^^^^^^^^^^^^^^^^^^^\n",
" File "/usr/local/lib/python3.12/site-packages/e3dc/_rscpTags.py", line 3692, in getStrRscpTag\n tag = RscpTag(tag)\n ^^^^^^^^^^^^\n",
" File "/usr/local/lib/python3.12/enum.py", line 744, in call\n return cls.new(cls, value)\n ^^^^^^^^^^^^^^^^^^^^^^^\n",
" File "/usr/local/lib/python3.12/enum.py", line 1158, in new\n raise ve_exc\n",
"ValueError: 16777278 is not a valid RscpTag\n",
"\nDuring handling of the above exception, another exception occurred:\n\n",
"Traceback (most recent call last):\n",
" File "/usr/local/lib/python3.12/site-packages/e3dc/_e3dc.py", line 226, in sendRequest\n result = self.rscp.sendRequest(request)\n ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^\n",
" File "/usr/local/lib/python3.12/site-packages/e3dc/_e3dc_rscp_local.py", line 108, in sendRequest\n raise CommunicationError\n",
"e3dc._e3dc_rscp_local.CommunicationError\n",
"\nDuring handling of the above exception, another exception occurred:\n\n",
"Traceback (most recent call last):\n",
" File "/config/custom_components/e3dc_rscp/diagnostics.py", line 116, in _query_data_for_dump\n tmp = call()\n ^^^^^^\n",
" File "/config/custom_components/e3dc_rscp/diagnostics.py", line 85, in \n lambda: self.e3dc.sendRequestTag(\n ^^^^^^^^^^^^^^^^^^^^^^^^^\n",
" File "/usr/local/lib/python3.12/site-packages/e3dc/_e3dc.py", line 263, in sendRequestTag\n return self.sendRequest(\n ^^^^^^^^^^^^^^^^^\n",
" File "/usr/local/lib/python3.12/site-packages/e3dc/_e3dc.py", line 237, in sendRequest\n raise SendError("Max retries reached")\n",
"e3dc._e3dc.SendError: Max retries reached\n"
]
},
"DB_REQ_HISTORY_DATA_DAY": [
"DB_HISTORY_DATA_DAY",
"Container",
[
[
"DB_SUM_CONTAINER",
"Container",
[
[
"DB_GRAPH_INDEX",
"Float32",
-1.0
],
[
"DB_BAT_POWER_IN",
"Float32",
4053.0
],
[
"DB_BAT_POWER_OUT",
"Float32",
3682.0
],
[
"DB_DC_POWER",
"Float32",
7782.0
],
[
"DB_GRID_POWER_IN",
"Float32",
1127.0
],
[
"DB_GRID_POWER_OUT",
"Float32",
1080.5
],
[
"DB_CONSUMPTION",
"Float32",
5878.0
],
[
"DB_PM_0_POWER",
"Float32",
0.0
],
[
"DB_PM_1_POWER",
"Float32",
0.0
],
[
"DB_BAT_CHARGE_LEVEL",
"Float32",
80.0790023803711
],
[
"DB_BAT_CYCLE_COUNT",
"Int32",
0
],
[
"DB_CONSUMED_PRODUCTION",
"Float32",
80.977294921875
],
[
"DB_AUTARKY",
"Float32",
81.6178970336914
]
]
],
[
"DB_VALUE_CONTAINER",
"Container",
[
[
"DB_GRAPH_INDEX",
"Float32",
0.8958332538604736
],
[
"DB_BAT_POWER_IN",
"Float32",
188.51162719726562
],
[
"DB_BAT_POWER_OUT",
"Float32",
171.2558135986328
],
[
"DB_DC_POWER",
"Float32",
361.9534912109375
],
[
"DB_GRID_POWER_IN",
"Float32",
52.41860580444336
],
[
"DB_GRID_POWER_OUT",
"Float32",
50.25581359863281
],
[
"DB_CONSUMPTION",
"Float32",
273.3953552246094
],
[
"DB_PM_0_POWER",
"Float32",
0.0
],
[
"DB_PM_1_POWER",
"Float32",
0.0
],
[
"DB_BAT_CHARGE_LEVEL",
"Float32",
80.0790023803711
],
[
"DB_BAT_CYCLE_COUNT",
"Int32",
0
],
[
"DB_CONSUMED_PRODUCTION",
"Float32",
80.977294921875
],
[
"DB_AUTARKY",
"Float32",
100.0
]
]
]
]
]
}
}

[torbennehmer]

Hi @tobiby,
please add a diagnostic dump.
Torben

[tobiby]

Hi Thorben, I don't have a diagnostic dumb because it would be a new feature . Grüße, Tobias torbennehmer ***@***.***> schrieb am Fr., 29. März 2024, 08:29:

…

Hi @tobiby <https://github.com/tobiby>, please add a diagnostic dump. Torben — Reply to this email directly, view it on GitHub <#128 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AB2EIMHVMGZ42UYK6P6KO33Y2UC3JAVCNFSM6AAAAABFMIP4KOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMRWHAYDKMZTHE> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[torbennehmer]

@tobiby yes, you do. The dump stores a lot of data retrieved from the e3dc, including your switch setup. I need that to implement something like this as I don't have any switches. So please add it (always, whatever you do), I ask for a reason, not for fun.

[tobiby]

Diagnistic dump attached in inital comment.

[tobiby]

Created a PR for solving this issue: #147