Skip to content

Latest commit

 

History

History
82 lines (66 loc) · 1.7 KB

README.md

File metadata and controls

82 lines (66 loc) · 1.7 KB

rklogger

Copyright 2012-2020 Thomas Petig foss@petig.eu Danfoss, TripleLynx, TLX, UniLynx, ULX and ComLynx are trademarks of Danfoss

CI

Please use the github issue tracker for bug reports and feature requests.

Introduction:

rklogger is a command line program for reading the parameters out of Danfoss inverters. This project is licensed under the GPLv3. It is tested with TLX and ULX inverters together with Debian stable (x86 and amd64).

Build:

Recent versions of:

  • cmake,
  • make,
  • g++ and
  • libboost-program-options-dev are required.

Please type within the project root directory:

git clone https://www.github.com/thpe/rklogger.git
cd rklogger
mkdir build
cd build
cmake ..
make

to build the project. Type

cmake -DCMAKE_BUILD_TYPE=Debug .
make

if you want to compile with additional debug output. For the installation type:

make install

or

sudo make install

depending of the permissions of you current user.

Usage (for more details see the installed manpage):

Go into this directory for the following examples, or call the binary from this path. All numerical parameters are given as hexadecimal number without prefix, e.g., 4e, 13, or d4.

To read a parameter:

rklogger <network> <node> <param_idx> <param_subidx> <param_modulidx>

To scan the network:

rklogger -s

To ping a inverter:

rklogger <network> <node>

To get information on additional parameters:

rklogger --help

For details regarding param_idx, param_subidx and param_modulidx please refer to the ComLynx protocol specification provided by Danfoss.