UEFI DXE driver status: Missing GPU BARO configuration (ØxØIØØØØØØØØØØØØA2)

[rehan123451]

System

• Motherboard: b360m gaming plus msi
• BIOS Version: 7B19v1B
• GPU: 2060 super driverr version 552.12
• CSM is turned off. Make sure to confirm this in the BIOS and not with GPU-Z or similar since it can be inaccurate
• 4G decoding is enabled. Make sure to confirm this in the BIOS and not with GPU-Z or similar since it can be inaccurate
• UEFIPatch is applied (see Using UEFIPatch for more information). On some motherboards DSDT Patching is also needed
• I have read Common issues (and fixes)

Description

Describe the issue here.

UEFI DXE driver status: Missing GPU BARO configuration (ØxØIØØØØØØØØØØØØA2)

[terminatorul]

Did you make hardware changes after you saved your settings in NvStrapsReBar.exe ? Like changing the PCIe slot for your GPU, or upgrading the GPU ?

Can you show output from menu option W (Show DXE driver configuration (for debugging)) ?

[rehan123451]

Did you make hardware changes after you saved your settings in NvStrapsReBar.exe ? Like changing the PCIe slot for your GPU, or upgrading the GPU ?

Can you show output from menu option W (Show DXE driver configuration (for debugging)) ?

thanks for the reply .
I dont do any changes . I only change the new nvidia driver 552.12 and then this happen .

Update : i fix the problem by installing your previous 0.3 version . there"s something problem in your 0.4 about this bug .

and thank u for your this project work . Finally my 2060 super have resizable bar .

[rehan123451]

i have 1 question have my mind . what happen if i enable 16gb resizable bar on my 2060 super ? Did my card increase the FPS or what ? curently using 8gb resizable bar

[terminatorul]

Nothing happens, same FPS (otherwise everyone would do this)

[seccentral]

Can totally confirm behavior on 0.4
reverted to 0.3, works fine, (on latest driver, fresh with DDU)
there's something wrong with 0.4

[terminatorul]

I can't find a problem just be reviewing the changes in v0.4, can you help me a bit ?

Do you have the steps to reproduce the problem ? Can you still show here the output from menu command W when error shows up (after reboot when NvStrapsReBar is enabled) ?