common-prop.mk

# Copyright (C) 2014 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# librqbalance enablement
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.extension_library=/vendor/lib/librqbalance.so

# Limit dex2oat threads to improve thermals
PRODUCT_PROPERTY_OVERRIDES += \
    dalvik.vm.dex2oat-threads=2 \
    dalvik.vm.image-dex2oat-threads=4

# Platform specific default properties
PRODUCT_PROPERTY_OVERRIDES += \
    persist.data.qmi.adb_logmask=0

# configure adb over wifi only on the eng build
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
    service.adb.tcp.port=5555
endif

# Common property setup DS or SS devices.
ifeq ($(PRODUCT_DEVICE_DS),true)
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.radio.multisim.config=dsds
else
PRODUCT_PROPERTY_OVERRIDES += \
    ro.telephony.default_network=9
endif

# System props for the data modules
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.use_data_netmgrd=true \
    persist.vendor.data.mode=concurrent \
    persist.data.netmgrd.qos.enable=true \
    ro.data.large_tcp_window_size=true

# Enable Power save functionality for modem
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.radio.add_power_save=1 \
    persist.vendor.radio.apm_sim_not_pwdn=1

# Enable advanced power saving for data connectivity
# DPM: Data Port Mapper, with TCM (TCP Connection Manager)
# CnE: Connectivity Engine
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.dpm.feature=1 \
    persist.vendor.dpm.tcm=1 \
    persist.vendor.cne.feature=1

# IMS
# P.S.: va_{aosp,odm} is necessary to load imscmservice
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.qti.va_aosp.support=1 \
    ro.vendor.qti.va_odm.support=1 \
    persist.vendor.radio.vdp_on_ims_cap=1 \
    persist.vendor.radio.report_codec=1

# VoLTE / VT / WFC
# These properties will force availability of the VoLTE,
# VideoTelephony and Wi-Fi Call, without needing carrier
# services provisioning sites hooked up: simplifies it.
PRODUCT_PROPERTY_OVERRIDES += \
    persist.dbg.volte_avail_ovr=1 \
    persist.dbg.vt_avail_ovr=1  \
    persist.dbg.wfc_avail_ovr=1

# Modem properties
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.radio.wait_for_pbm=1 \
    persist.vendor.radio.mt_sms_ack=19 \
    persist.vendor.radio.enableadvancedscan=true \
    persist.vendor.radio.unicode_op_names=true \
    persist.vendor.radio.sib16_support=1 \
    persist.vendor.radio.oem_socket=true

# Ringer
PRODUCT_PROPERTY_OVERRIDES += \
    ro.telephony.call_ring.multiple=false

# System props for telephony System prop to turn on CdmaLTEPhone always
PRODUCT_PROPERTY_OVERRIDES += \
    telephony.lteOnCdmaDevice=0

# Stagefright
PRODUCT_PROPERTY_OVERRIDES += \
    media.stagefright.thumbnail.prefer_hw_codecs=true

# Delay reduction
PRODUCT_PROPERTY_OVERRIDES += \
    sdm.debug.rotator_downscale=1

# DRM service
PRODUCT_PROPERTY_OVERRIDES += \
    drm.service.enabled=true

# VIDC: debug_levels 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
PRODUCT_PROPERTY_OVERRIDES += \
    vidc.debug.level=1

# Audio
PRODUCT_PROPERTY_OVERRIDES += \
    audio.deep_buffer.media=true \
    fmas.hdph_sgain=0 \
    media.aac_51_output_enabled=true \
    ro.config.media_vol_steps=25 \
    ro.config.vc_call_vol_steps=7

# Audio (AOSP HAL)
PRODUCT_PROPERTY_OVERRIDES += \
    persist.audio.fluence.speaker=true \
    persist.audio.fluence.voicecall=true \
    persist.audio.fluence.voicecomm=true \
    persist.audio.fluence.voicerec=true \
    ro.qc.sdk.audio.fluencetype=fluence

# Audio (newer CAF HALs)
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.audio.fluence.speaker=true \
    persist.vendor.audio.fluence.voicecall=true \
    persist.vendor.audio.fluence.voicecomm=true \
    persist.vendor.audio.fluence.voicerec=true \
    ro.vendor.audio.sdk.fluencetype=fluence \
    vendor.audio_hal.in_period_size=144 \
    vendor.audio_hal.period_multiplier=3 \
    vendor.audio_hal.period_size=192 \
    vendor.audio.offload.gapless.enabled=true \
    vendor.audio.offload.multiaac.enable=true \
    vendor.audio.offload.multiple.enabled=false \
    vendor.audio.offload.passthrough=false \
    vendor.audio.offload.track.enable=true \
    vendor.audio.parser.ip.buffer.size=262144 \
    vendor.audio.volume.headset.gain.depcal=true \
    vendor.voice.path.for.pcm.voip=true

# Audio (CAF - Hardware enc/decoding)
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.audio.flac.sw.decoder.24bit=true \
    vendor.audio.hw.aac.encoder=true \
    vendor.audio.use.sw.alac.decoder=true \
    vendor.audio.use.sw.ape.decoder=true

# Audio Features
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.audio.feature.afe_proxy.enable=true \
    vendor.audio.feature.anc_headset.enable=true \
    vendor.audio.feature.audiozoom.enable=false \
    vendor.audio.feature.battery_listener.enable=false \
    vendor.audio.feature.compr_cap.enable=false \
    vendor.audio.feature.compress_meta_data.enable=true \
    vendor.audio.feature.deepbuffer_as_primary.enable=false \
    vendor.audio.feature.dsm_feedback.enable=false \
    vendor.audio.feature.ext_hw_plugin.enable=false \
    vendor.audio.feature.external_dsp.enable=false \
    vendor.audio.feature.external_speaker_tfa.enable=false \
    vendor.audio.feature.external_speaker.enable=false \
    vendor.audio.feature.fluence.enable=true \
    vendor.audio.feature.fm.enable=true \
    vendor.audio.feature.hfp.enable=true \
    vendor.audio.feature.hifi_audio.enable=false \
    vendor.audio.feature.hwdep_cal.enable=false \
    vendor.audio.feature.incall_music.enable=false \
    vendor.audio.feature.keep_alive.enable=false \
    vendor.audio.feature.maxx_audio.enable=false \
    vendor.audio.feature.multi_voice_session.enable=true \
    vendor.audio.feature.ras.enable=true \
    vendor.audio.feature.record_play_concurency.enable=false \
    vendor.audio.feature.snd_mon.enable=true \
    vendor.audio.feature.spkr_prot.enable=true \
    vendor.audio.feature.src_trkn.enable=true \
    vendor.audio.feature.ssrec.enable=true \
    vendor.audio.feature.usb_offload_burst_mode.enable=false \
    vendor.audio.feature.usb_offload_sidetone_volume.enable=false \
    vendor.audio.feature.usb_offload.enable=true \
    vendor.audio.feature.vbat.enable=true \
    vendor.audio.feature.wsa.enable=false

# AudioPolicy Manager
PRODUCT_PROPERTY_OVERRIDES += \
    audio.offload.video=1

# AudioFlinger
PRODUCT_PROPERTY_OVERRIDES += \
    ro.af.client_heap_size_kbyte=7168

# Enable stats logging in LMKD
TARGET_LMKD_STATS_LOG := true
PRODUCT_PROPERTY_OVERRIDES += \
    ro.lmk.log_stats=true

# Set lmkd options
PRODUCT_PROPERTY_OVERRIDES += \
    ro.lmk.low=1001 \
    ro.lmk.medium=800 \
    ro.lmk.critical=0 \
    ro.lmk.critical_upgrade=false \
    ro.lmk.upgrade_pressure=100 \
    ro.lmk.downgrade_pressure=100 \
    ro.lmk.kill_heaviest_task=true \
    ro.lmk.kill_timeout_ms=100 \
    ro.lmk.use_minfree_levels=true

# Property to enable user to access Google WFD settings.
PRODUCT_PROPERTY_OVERRIDES += \
    persist.debug.wfd.enable=0

# Property to choose between virtual/external wfd display
PRODUCT_PROPERTY_OVERRIDES += \
    persist.sys.wfd.virtual=0

# Wi-Fi interface name
PRODUCT_PROPERTY_OVERRIDES += \
    wifi.interface=wlan0

# BT address
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.bt.bdaddr_path=/data/vendor/bluetooth/bluetooth_bdaddr

# BT address for devices with BCM BT
PRODUCT_PROPERTY_OVERRIDES += \
    ro.bt.bdaddr_path=/data/vendor/bluetooth/bluetooth_bdaddr

# RILD
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.rild.libpath=/odm/lib64/libril-qc-hal-qmi.so \
    persist.rild.nitz_plmn= \
    persist.rild.nitz_long_ons_0= \
    persist.rild.nitz_long_ons_1= \
    persist.rild.nitz_long_ons_2= \
    persist.rild.nitz_long_ons_3= \
    persist.rild.nitz_short_ons_0= \
    persist.rild.nitz_short_ons_1= \
    persist.rild.nitz_short_ons_2= \
    persist.rild.nitz_short_ons_3= \
    ril.subscription.types=NV,RUIM \

# OpenGLES version
PRODUCT_PROPERTY_OVERRIDES += \
    ro.opengles.version=196610

# Vendor version
PRODUCT_PROPERTY_OVERRIDES += \
    ro.odm.expect.version=$(PLATFORM_VERSION)_$(SOMC_KERNEL_VERSION)_$(SOMC_PLATFORM)_$(TARGET_VENDOR_VERSION)

# Priv-app permisisons
PRODUCT_PROPERTY_OVERRIDES += \
    ro.control_privapp_permissions=enforce

# Avoid Adoptable double encryption
PRODUCT_PROPERTY_OVERRIDES += \
    ro.crypto.allow_encrypt_override=true

# Reduce cost of scrypt for FBE CE decryption
PRODUCT_PROPERTY_OVERRIDES += \
    ro.crypto.scrypt_params=15:3:1

# Look for libGLES_adreno.so instead of libGLES_$(BOARD_TARGET_PLATFORM).so
PRODUCT_PROPERTY_OVERRIDES += \
    ro.hardware.egl=adreno

# Look for vulkan.qcom.so instead of vulkan.$(BOARD_TARGET_PLATFORM).so
PRODUCT_PROPERTY_OVERRIDES += \
    ro.hardware.vulkan=adreno