Welcome to PMW3360-PCB Discussion!

[ziteh]

👋 Welcome!

If there is anything you want to know, share or discuss, feel free to open a new discussion.

如果有任何想了解、分享或討論的內容，請隨時開啟新的討論（new discussion）。

[ThePreviousOne]

would this also work for the PMW3389?

[ziteh]

After comparing the datasheet of PMW3360 and PMW3389, I found that they have the same size, pins (except GPO pin) and operating voltage, and the only difference in firmware seems to be the SROM.

But it should be noted that their reference schematic are different. The PMW3389 has more capacitances (100nF and 10uF) at VDD, VDDIO and LED_1P pin, and the series resistance of LED_1P is changed to 13R.

Changing the LED resistor from 39R to 13R is easy, but there may not be a suitable place to solder the extra capacitors, although I imagine it will work without them.

I don't have a PWM3389 to test. I may consider adding support for PWM3389 in the next revision.

[ThePreviousOne]

thanks