Segmentation fault when using nodemcu

[Friday8229]

IMPORTANT NOTICE
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so that it can be solved by as little as possible responses.

FAILURE TO COMPLETE THE REQUESTED INFORMATION WILL RESULT IN YOUR ISSUE BEING CLOSED

Board and OS details:

Open a terminal and run

cat /proc/cpuinfo  
cat /etc/os-release  

Paste your Board and OS details here.   

pi@raspberrypi:~ $ cat /proc/cpuinfo
processor : 0
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4

processor : 1
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4

processor : 2
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4

processor : 3
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4

Hardware : BCM2835
Revision : a020d3
Serial : 0000000054341172

pi@raspberrypi:~ $ cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Describe the bug:

Whenever i say hey google turn on wireless device 1 it gives me this error

### Did you go through or search the issues section to check if your issue was already discussed (either currently open issues or closed issues).
Yes

### 2. Is the issue related to assistant installation ?
No

### If answer to question 2 is Yes, then paste the contents of the terminal below.

### If answer to question 2 is No, then proceed further.
### 3. Does the assistant service start normally?
Yes

### 4. Is the assistant service restarting automatically?
No

### If answer to question 4 is Yes, then paste the contents of the terminal below.

### If answer to question 4 is No, then proceed further.
### Manually start the assistant. For guidelines to start the assistant manually refer [this](https://github.com/shivasiddharth/GassistPi#manually-start-the-assistant)

### Paste the command below, that crashed the assistant

When i say -Hey google turn on wireless device 1

Paste the contents of the terminal below

pi@raspberrypi:~ $ 
INFO:gmusicapi.Mobileclient1:!-- begin debug log --!
INFO:gmusicapi.Mobileclient1:version: 12.1.1
INFO:gmusicapi.Mobileclient1:logging to: /home/pi/.cache/gmusicapi/log/gmusicapi.log
INFO:gmusicapi.Mobileclient1:initialized
INFO:gmusicapi.Mobileclient1:logged out
/home/pi/env/lib/python3.5/site-packages/oauth2client/_helpers.py:255: UserWarning: Cannot access /home/pi/.local/share/gmusicapi/mobileclient.cred: No such file or directory
  warnings.warn(_MISSING_FILE_MESSAGE.format(filename))
2019-08-24 16:17:18,209 - gmusicapi.Mobileclient1 (shared:183) [WARNING]: could not retrieve oauth credentials from ''/home/pi/.local/share/gmusicapi/mobileclient.cred''
WARNING:gmusicapi.Mobileclient1:could not retrieve oauth credentials from ''/home/pi/.local/share/gmusicapi/mobileclient.cred''
INFO:gmusicapi.Mobileclient1:failed to authenticate
[019766e0] vlcpulse audio output error: PulseAudio server connection failure: Connection refused
[01982360] vlcpulse audio output error: PulseAudio server connection failure: Connection refused
USB-DAC
Initializing GPIOs 5 and 6 for assistant activity indication
Expression 'alsa_snd_pcm_hw_params_set_period_size_near( pcm, hwParams, &alsaPeriodFrames, &dir )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 924
Expression 'alsa_snd_pcm_hw_params_set_period_size_near( pcm, hwParams, &alsaPeriodFrames, &dir )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 924
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_alsa.pcm.front.0:CARD=0'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5007:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM front
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_alsa.pcm.surround51.0:CARD=0'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5007:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM surround21
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_alsa.pcm.surround51.0:CARD=0'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5007:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM surround21
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_alsa.pcm.surround40.0:CARD=0'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5007:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM surround40
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_alsa.pcm.surround51.0:CARD=0'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5007:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM surround41
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_alsa.pcm.surround51.0:CARD=0'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5007:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM surround50
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_alsa.pcm.surround51.0:CARD=0'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5007:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM surround51
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_alsa.pcm.surround71.0:CARD=0'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5007:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM surround71
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_alsa.pcm.iec958.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5007:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM iec958
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_alsa.pcm.iec958.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5007:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM spdif
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_alsa.pcm.iec958.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5007:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM spdif
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'defaults.bluealsa.device'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4996:(snd_config_expand) Args evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM bluealsa
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'defaults.bluealsa.device'
ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4996:(snd_config_expand) Args evaluate error: No such file or directory
ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM bluealsa
ALSA lib pcm_dsnoop.c:556:(snd_pcm_dsnoop_open) The dsnoop plugin supports only capture stream
ALSA lib pcm_dmix.c:990:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
device_model_id: zero-38896-zero-38896-y1hare
device_id: AA8BE037667D66B5A5FF1A5CC2E7594A

ON_MUTED_CHANGED:
  {"is_muted": false}

ON_START_FINISHED

ON_MEDIA_STATE_IDLE

ON_CONVERSATION_TURN_STARTED

ON_END_OF_UTTERANCE

ON_END_OF_UTTERANCE

ON_RECOGNIZING_SPEECH_FINISHED:
  {"text": "turn on wireless device 1"}

Fatal Python error: Segmentation fault

Thread 0x669fd470 (most recent call first):
  File "/home/pi/GassistPi/src/snowboydecoder.py", line 159 in start
  File "/home/pi/GassistPi/src/main.py", line 475 in start_detector
  File "/usr/lib/python3.5/threading.py", line 862 in run
  File "/usr/lib/python3.5/threading.py", line 914 in _bootstrap_inner
  File "/usr/lib/python3.5/threading.py", line 882 in _bootstrap

Thread 0x64ffe470 (most recent call first):
  File "/home/pi/GassistPi/src/main.py", line 248 in pushbutton
  File "/usr/lib/python3.5/threading.py", line 862 in run
  File "/usr/lib/python3.5/threading.py", line 914 in _bootstrap_inner
  File "/usr/lib/python3.5/threading.py", line 882 in _bootstrap

Thread 0x76f71640 (most recent call first):
  File "/home/pi/env/lib/python3.5/site-packages/google/assistant/library/assistant.py", line 114 in __exit__
  File "/home/pi/GassistPi/src/main.py", line 1016 in main
  File "/home/pi/GassistPi/src/main.py", line 1024 in <module>
Segmentation fault


### Attach the log file named Gassistpi.log
Log file can be found in /tmp/ directory  

[Friday8229]

Here is the log file
GassistPi.log

I am using esp-01 with only 2 devices in the ino file and I also tried removing device 3 in config.yaml but nothing helped.I can control it using the ip address from a browser.

[Welsyntoffie]

I am getting this issue trying to use Domonticz. Have you solved this issue?

[Friday8229]

Nope I'm still having the issue and looking forward for the solutions

[Welsyntoffie]

When I disable Domonticz everything works. I want to control my arduino through domonticz.
When I Enable Domonticz the assistant crashes right after the wake word.

[shivasiddharth]

@Friday8229 Sorry missed this issue somehow. Are you in a position still to provide the details if I request ?

I would like you to recreate the crash and share the terminal contents of this crash again since its over an year. Also please attach the config.yaml without masking or removing anything.

[Welsyntoffie]

My problem turned out to be a port issue.
Its not connecting to domoticz with http.
I get your error when connecting with https using port 443.
So i changed domoticz https port to 1024 and updated the config.yaml file. That solved my problem.