- include upstream fix for a problem with newer firmware of TL-WR1043ND v4
- Updated to Gluon v2016.2.7 (see upstream release notes!)
- Updated site.conf
- increase MTU to 1312
- include fix for an upstream regression in 2016.2.4
- add a workaround package that reboots a node as a last measure
- Updated to Gluon 2016.2.4 (see upstream release notes!)
- Updated site.conf
- change TLD of openwrt opkg download proxy
- add static IPv4 & IPv6 addresses for fastd instances
- remove setting mesh_on_wan (is optional anyway)
- disable ibss/adhoc meshing standard (replaced by 802.11s)
- fix sysupgrade on some systems (e.g. sdcard storage)
- Updated to Gluon 2016.2.3 (see upstream release notes!)
- Updated site.conf
- activate 802.11s meshing standard parallel to ibss/adhoc
- add supported and basic rates to configuration
- remove update probability (obsolete since gluon 2016.1.x)
- activate support for 802.11s mesh on ath10k devices, e.g. Archer C7 & Unifi AP AC
- add confirmation request if contact or location are left blank in config-mode
- add migration of experimental nodes to stable branch
- add more NIC drivers to support e.g. IGEL UD5-2
- add support for flashing over vendor firmwares with region codes
- add USB1 device driver on x86
- add USB3 driver on x86
- improve descriptions for hostname, contact-info & geo-location in config-mode
- remove respondd-watchdog (fixed upstream)
- remove ssh password option from config-mode
- workaround for problems with ath9k wifi driver: start only every 10 minutes
- Updated to Gluon 2016.1.6
- Updated site.conf
- add 2 additional placeholder fastd gws
- add 6th firmware signture key & replace one
- add option
additional_prefix6
(used by ebtables firewall) - add repository for kernel modules for each build
- change domain for OpenWRT package downloads
- hide altitude field in config mode
- increase size of
prefix4
to /19
- add autoupdater fallback mode (uses wifi client mode)
- add autoupdater improvements from master branch
- add kmod-igb NIC driver, used e.g. on APU2
- add package for time-based (de-)activation of bandwidth limits
- add package for time-based (de-)activation of the client SSID
- add usb network drivers to more devices with enough space
- add watchdog package for crashing respondd
- improve workaround for problems with ath9k wifi driver
- improve Makefile: job count handling
- stronger ebtables firewall with tecff-ebtables-net-rules
- move external packages into tecff package feed & rename to avoid conflicts
- remove gluon-treatment
- remove gluon-alfred
- remove tools from build as manual installation is easy
- improve workaround package/script for problems with ath9k wifi driver
- improve workaround package/script for problems with ath9k wifi driver
- Updated to Gluon 2016.1.5, includes 2016.1.4
- use the additional packages for D-Link DIR-505
- add workaround package/script for problems with ath9k wifi driver
- add package for special treatment of nodes
- remove support for 802.11b wifi
- remove support for slow wifi connections
- Update site.conf
- enable fastd mesh vpn by default
- add NTP servers IPv6 addresses as no-DNS-fallback
- Updated to Gluon 2016.1.3
- support for rtl8152 network chip used in USB networking devices
- Updated to Gluon 2016.1.2
- support for TP-Link TL-WA7510N
- support for Raspberry Pi A/B/B+/2
- support for several additional USB networking devices
- Updated to Gluon 2016.1.1
- add preserve wifi channels feature
- Updated to Gluon 2016.1
- Update site.conf
- change default ESSID to Freifunk
- raise number of necessary signatures for sysupgrade images
- Set batman gw selection class to 3 (fast switch)
- reduce dependencies regarding firmware updates
- reduce dependencies regarding gateway connections
- change MTU to 1280 (solves issues with IPv6 & DS-Lite)
- allow IPv6 for gateway connections
- add gluon-ssid-changer: nodes with bad TQ change their ESSID
- add x86-64 build-target
- add support for several USB devices
- add support for Futro devices (useful offloader)
- use custom banner file
- replace dev-Gateway-Hostnames by currently not-in-use stable ones
- add signing key for Buildserver
- add support for TP-Link TL-WR1043ND v3
- Makefile added mpc85xx-generic for powerPC based Router
- Replaced Munich specifics with Altdorf
- Updated to Gluon 2015.1.1
- Fixes some problems with mesh on LAN setups
- x86 images now support two network interfaces, eth0 for LAN and eth1 for WAN
- Mesh on WAN is disabled by default
- VPN connection limit was decreased from 2 to 1 to divide the broadcast traffic into half and take unnecessary load from overloaded gateways
- Updated to Gluon 2015.1
- More supported architectures and router models are available, including x86
- Setup Mode
- A new wifi configuration page is available to disable client and mesh networks on 2.4 & 5GHz indiviually
- Mesh on WAN can now be configured and is enabled by default
- Internationalization for German and English is available and will be autodetected depending on the browser setting
- Add 4 new gateways as placeholders (not all are and will be active immediately)
- Integrated no_rebroadcast fix on mesh-vpn from Gluon Upstream
- Added another key for stable version signing
- Updated to new upstream gluon: 52698e62bac2ec0f8764b12cf437040528e77efb
- Switched to batman-adv compat version 15
- Changed channel to 6 with HT20 on 2.4GHz
- Added FFMuc custom gluon packages with ebtables rules:
- mcast-drop-non-site to prohibit arp traffic except 10.8.0.0/16
- mcast-drop-arp to drop arp traffic from/to 0.0.0.0
- mcast-allow-cjdns to allow cjdns multicast traffic
- Use new gateways with DNS names
- Changed default download/upload traffic shaping to 12.000/1.200 kbit/s
- Removed keyformular note on end of luci configuration, as we're now blacklisting keys instead of whitelisting
- Added information about liquid feedback on end of luci configuration
- Use improved version naming scheme for autoupdater compatibility with intermediate versions
- Use internal NTP server 0.ntp.ffmuc.net
- Connections from nodes to gateways only over IPv4 for now (MTU issues)
- Updated to Gluon 2014.4 release
- Autoupdater
- Now enabled per default
- Also fetch firmware from build.freifunk-muenchen.de
- Require two signatures instead of one for stable autoupdate
- fixed ipv4-prefix to /16 netmask
- changed gateways ips to domain-names
- changed
msg_pub_key
to automate entering the node-data to our key-form - changed mesh-SSID from 02:0E:8E:1E:61:17 to mesh.ffm
- added
ntp_servers
'2.ntp.services.ffm','3.ntp.services.ffm','4.ntp.services.ffm' - changed
site_code
back to ffmuc (instead of ffm) - changed
hostname_prefix
to NULL - changed
mesh_ssid
to mesh.ffmuc - added public key from fpletz
- changed ip address for gw02
- gw04 hinzugefügt
- Text "Knoten hinzufügen" geändert
- Autoupdater auf "stable" als Standart-Wert gesetzt
- Autoupdater hinzugefügt
- Bugfixes
- gw02 hinzugefügt
- initiale Version