Do not allow "Controller" Run in Manual Modes

[SimoHDK]

Hello,

Unless I have missed a setting, it does not seem there is an ability to hide/block the 'Manual' mode for the Controller (I.e. level 1.0)

This is an issue as running the "Controller" manually (in an accidental situation) turns on all relays at the same time, which will overload my power supply and water pressure.

I have an interlock enabled via ESPHome, however it simply pulses through all the relays (In my case, 1 through to 8) and stays on the last relay for the designated run time.

Thoughts?

[rgc99]

There is currently no way to limit this functionality. However, a recent feature gives the ability to queue manual runs. In this way it will still work but run one after the other. This feature is in the repository but not yet released. Do a manual instal to check it out.

[rgc99]

Oh, add a queue_manual: true under the controller object.

[SimoHDK]

Hello,
Apologies for the delayed response. This seems to be working quite well, and solves the problem i described. Perfect!

Look forward to offical release.

Cheers

[SimoHDK]

One thing I have noticed - If you use the manual run card to queue various different zones, It doesn't seem to refresh the main IU Card status, despite being there in the background (the queue does work)