{"payload":{"feedbackUrl":"https://github.com/orgs/community/discussions/53140","repo":{"id":88669446,"defaultBranch":"dev","name":"hms","ownerLogin":"quanted","currentUserCanPush":false,"isFork":false,"isEmpty":false,"createdAt":"2017-04-18T20:50:46.000Z","ownerAvatar":"https://avatars.githubusercontent.com/u/16341712?v=4","public":true,"private":false,"isOrgOwned":true},"refInfo":{"name":"","listCacheKey":"v0:1689266090.0","currentOid":""},"activityList":{"items":[{"before":"ea1f78a375ff2b8954ab61f38d534e97722f753f","after":"338d8fcf7bcfc78a1701228e0302e923526fbc2b","ref":"refs/heads/hawqs-api","pushedAt":"2024-04-16T13:03:48.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Added retention time output as a volume \"rate\" variable.\nAverage retention time for each segment saved during model linkage as possible factor to determine which segments are too short and need to be optimized.\nNWM calls to retrieve  reservoir geometry made asynchronous.\nAdded better error handling for output graphs.\nImproved wording on various error messages and console output.","shortMessageHtmlLink":"Added retention time output as a volume \"rate\" variable."}},{"before":"5d168c3181b2012686f63e08adb334e20083330a","after":"ea1f78a375ff2b8954ab61f38d534e97722f753f","ref":"refs/heads/hawqs-api","pushedAt":"2024-04-09T21:26:19.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Fixed problem limiting sizing of JSON edit screen.\nDefault data-storage step size set to 1 day for all linked simulations (this can be changed in the master setup)\nFixed an issue where the wrong base simulation name could be shown on the MultiSeg form.\nIncreased the zoom level that the map needs to display lake/reservoir data to reduce form lagging.","shortMessageHtmlLink":"Fixed problem limiting sizing of JSON edit screen."}},{"before":"d514cce8290057529998218ee27e050c68e3bd57","after":"5d168c3181b2012686f63e08adb334e20083330a","ref":"refs/heads/hawqs-api","pushedAt":"2024-04-09T17:49:13.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"AQ_Sim_2D.cs: Avoid potential issue with negative model-linked water-flow values\nTVolume.cs Bullet-proof Manning's Volume Calculation\nUpdate of splash form to provide more information and link to help file\nUsers Manual update to add more info about model linkage and improve formatting","shortMessageHtmlLink":"AQ_Sim_2D.cs: Avoid potential issue with negative model-linked water-…"}},{"before":"d48ce12d308fde0910ec50184e4c25150f0f6765","after":"d514cce8290057529998218ee27e050c68e3bd57","ref":"refs/heads/hawqs-api","pushedAt":"2024-04-02T21:48:58.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"fix minor help file browser glitch-- not jumping to correct help topic\nMade change to also check for boundary conditions relevant to one-HUC14 buffer around study area to ensure HAWQS simulations don't go out of bounds.\nAdded debug link to output log in case where HAWQS returns no data.\nAdded AQUATOX icon to form so that it displays properly in task bar\nFixed working directory if another instance of the executable is run from the task bar\nUpdated users manual to 4-2-2024 version that includes latest multi-seg interface updates.","shortMessageHtmlLink":"fix minor help file browser glitch-- not jumping to correct help topic"}},{"before":"a9eb63b17384f317929136e96d21ac4ff65f1ede","after":"d48ce12d308fde0910ec50184e4c25150f0f6765","ref":"refs/heads/hawqs-api","pushedAt":"2024-04-01T15:54:54.000Z","pushType":"push","commitsCount":9,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Update to Serilog.AspNetCore (8.0.1) required after merging Dev branch.  Needs Deron's review.","shortMessageHtmlLink":"Update to Serilog.AspNetCore (8.0.1) required after merging Dev branc…"}},{"before":"722fd1806c04a0da68e07fbb6943564cf17fbc09","after":"a9eb63b17384f317929136e96d21ac4ff65f1ede","ref":"refs/heads/hawqs-api","pushedAt":"2024-03-29T19:01:43.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"AQ_Sim_2D: Improved weighted averaging when passing data by concentrations so that incoming concentrations are weighted by daily flow of multiple inputs.\nNewSimForm.cs:  Fixed some relative file-path references\nContinued to refine csproj and publish options to get correct files copied to correct directories.","shortMessageHtmlLink":"AQ_Sim_2D: Improved weighted averaging when passing data by concentra…"}},{"before":"3b1aa919bc93f983045a1b37248028a707b3f128","after":"722fd1806c04a0da68e07fbb6943564cf17fbc09","ref":"refs/heads/hawqs-api","pushedAt":"2024-03-28T19:58:38.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"AQ_Sim_2D: Move from catchment webservice to local database to speed up model linkage for COMIDs.\nRename HelpButton and CancelButton across all forms to avoid overwriting C# variables.\nFix some interface issues following addition of splash screen.\nEnable drag of splash screen.","shortMessageHtmlLink":"AQ_Sim_2D: Move from catchment webservice to local database to speed …"}},{"before":"3fcb653fdc928d1420b09c9030845129fe95fed1","after":"3b1aa919bc93f983045a1b37248028a707b3f128","ref":"refs/heads/hawqs-api","pushedAt":"2024-03-27T13:40:35.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Improved interface enable/disable during time consuming tasks\nAdded compatibility for 32 bit and 64 bit by linking to proper 7zip dll.\nLoad of local webServiceURLs.JSON file to override default URLs if required.\nEdited csproj to set up simpler directory structure for testing and deployment and include all relevant files and libraries (html, 7zip, DB, 2D_Inputs, Studies).","shortMessageHtmlLink":"Improved interface enable/disable during time consuming tasks"}},{"before":"215b66c0653e1fa96d0fe7121cd2feb076e57695","after":"3fcb653fdc928d1420b09c9030845129fe95fed1","ref":"refs/heads/hawqs-api","pushedAt":"2024-03-26T13:11:59.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Added splash screen to show model version, to allow the user to choose between 0-D and multi-segment mode, and to allow the user to open multiple model windows for data comparison.\nAdded webServiceURLsClass that can be loaded and saved to disk so that model does not require recompliation if web service URLs change.  Replaced all web service URLs to use this object and tested.\nReconfigured project directory structure, modifying the CSPROJ, and also relative file paths within the application\nModified HAWQSInput object to avoid duplication of some fields when converting to JSON.\nImproved location of some dialogs so they don't move to other monitors when using a multi-monitor setup.\nAdded improved error trapping when accessing databases in case file structure is not as expected.\nAdded api key input to the HAWQS JSON editor and added code to save user input to settings.settings so it only needs to be input once and then is remembered.","shortMessageHtmlLink":"Added splash screen to show model version, to allow the user to choos…"}},{"before":"d0cd12dce4257beb29291f0cfcf44a96b23bc7aa","after":"215b66c0653e1fa96d0fe7121cd2feb076e57695","ref":"refs/heads/hawqs-api","pushedAt":"2024-03-20T21:25:02.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"AQ_Sim_2D: Switch to passing data based on concentrations for now rather than mass due to water volume differences.\nAQ_Sim_2D: Fixed calculation of inflow loads when Manning's Coefficient is used in a linked simulation\nAQ_Sim_2D: Fixed Bug in which output list was showing duplicate entries.\nAdded title to output windows and made them pop up over existing AQUATOX forms.\nMultiSegForm:  Added capability to search for text in the log file\nOutputForm:  Fixed axis number formatting\njson changes -- for nutrient-only simulations made default pH 7.0","shortMessageHtmlLink":"AQ_Sim_2D: Switch to passing data based on concentrations for now rat…"}},{"before":"f3f27720178b6f0646f7e418d943b71c724b66c7","after":"ff4bcb773ccbcb351c8ac9cc309d5292fb878be5","ref":"refs/heads/dev","pushedAt":"2024-03-20T20:06:47.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"dbsmith88","name":"Deron Smith","path":"/dbsmith88","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/14054467?s=80&v=4"},"commit":{"message":"updated mongodb driver","shortMessageHtmlLink":"updated mongodb driver"}},{"before":"4d4c13dfd751a718aa22b55a73df8f01792bd69a","after":"f3f27720178b6f0646f7e418d943b71c724b66c7","ref":"refs/heads/dev","pushedAt":"2024-03-20T19:35:14.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"dbsmith88","name":"Deron Smith","path":"/dbsmith88","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/14054467?s=80&v=4"},"commit":{"message":"nuget package updates and base docker image version update for prisma","shortMessageHtmlLink":"nuget package updates and base docker image version update for prisma"}},{"before":"eb7685e08cda1ca780f92e0d691dcfc3c8ef8b36","after":"d0cd12dce4257beb29291f0cfcf44a96b23bc7aa","ref":"refs/heads/hawqs-api","pushedAt":"2024-03-19T21:01:55.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"AQ_Sim_2D.cs--\n\tUpdated VolFlowFromHAWQS to use HAWQS/SWAT morphometry parameters and Manning's N equation.\n\tImproved asynchronous management of time consuming tasks\n\tAdded ReadHUCGeometry to read morphometry from RTE and SUB csv files provided from TAMU\n\tAdded ReadCOMIDGeometry to read channel geometry from catchment webservice\n\tAdded Pass_Data based on mass and concentration as mass from reservoirs could be problematic if there was a water flow mismatch.\nAQForm-- queries if user wishes to save file before exiting\nLoadingsForm-- greys out irrelevant loadings depending on water volume model selected\nMultiSegForm -- improvements to graphing multiple segment results\nMultiSegForm Handles updated TAMU linkage and checks metadata for relevant errors\nOutputForm -- allows user to save parameters associated with a given output set","shortMessageHtmlLink":"AQ_Sim_2D.cs--"}},{"before":"0d1fc1f8e12930b4552bc81cc6c89bfe80bd3a39","after":"eb7685e08cda1ca780f92e0d691dcfc3c8ef8b36","ref":"refs/heads/hawqs-api","pushedAt":"2024-03-18T13:20:50.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"AQ_Sim_2D.cs -- Completed draft of HAWQS linkage procedures to handle combined stream network/lake reservoir inputs\nAQ_Sim_2D.cs -- Rewrote some linkage code so that seconds to days are handled during linkage rather than requiring the use of an 86400 multiply loading by factor.\nLoadings.cs -- Added code to allow units conversion when inputting an ITimeSeriesInput\nMultiSegForm.cs -- Fixed issue where RecentFilesBox selection changing was not working properly in some cases due to sorting of most recent\nMultiSegForm.cs -- Cleaned up some interface issues when working with disaggregated COMIDs\ngit MultiSegForm.cs -- Completed tested draft of procedures to handle combined stream network/lake reservoir inputs","shortMessageHtmlLink":"AQ_Sim_2D.cs -- Completed draft of HAWQS linkage procedures to handle…"}},{"before":"e031e91decbe529251c86b0c1875634544fec9c8","after":"0d1fc1f8e12930b4552bc81cc6c89bfe80bd3a39","ref":"refs/heads/hawqs-api","pushedAt":"2024-03-08T22:06:05.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Added code to read (initial draft) of HAWQS disaggregation API results, unzip the data, and link to the AQUATOX simulation.\nFixed an issue with default output graphs.","shortMessageHtmlLink":"Added code to read (initial draft) of HAWQS disaggregation API result…"}},{"before":"4316e8094d3be11ce62248dce5eef06ba7ff3efb","after":"e031e91decbe529251c86b0c1875634544fec9c8","ref":"refs/heads/hawqs-api","pushedAt":"2024-03-05T21:39:01.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"AQTSegment -- fix issue in which empty archived results were causing a crash\nAQ_Sim_2D -- refinement of HAWQS linkage for multi-segment simulations\nMultiSegForm -- capability to edit HAWQS JSON calls was added.  Multi-segment HAWQS read added.\nOutputForm -- default graphs added\nLeaflet maps -- upgraded to newest version of esri.leaflet and added wait cursor when loading streamnetwork files.","shortMessageHtmlLink":"AQTSegment -- fix issue in which empty archived results were causing …"}},{"before":"cc0c3ebf8708a48cb530d0a1bf446ca9f0ab6ea6","after":"4316e8094d3be11ce62248dce5eef06ba7ff3efb","ref":"refs/heads/hawqs-api","pushedAt":"2024-02-25T20:52:10.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Additional interface refinements following programmer testing.  Fixed sizing of loadings window.  Added automatic production of graphs for simulations.","shortMessageHtmlLink":"Additional interface refinements following programmer testing. Fixed …"}},{"before":"2b258392333a88557be6567fa44a1902e4c3bcbc","after":"cc0c3ebf8708a48cb530d0a1bf446ca9f0ab6ea6","ref":"refs/heads/hawqs-api","pushedAt":"2024-02-23T22:51:16.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"AQTSegment.cs Add Chl-a output\nAQ_Sim_2D.cs Completed and tested HAWQSRead method\nMultiSegForm.cs  Completed and debugged interface for HAWQS linkage and HUC0D implementation\nleafletMap.html  support click on 0D HUC objects to send back to MultiSegForm\nnewSimMap.html  fixed bugs when HUC14 click was sometimes not registering, and when HUC14s were rendering behind background layers","shortMessageHtmlLink":"AQTSegment.cs Add Chl-a output"}},{"before":"90e875f6185e88475aa3791e5db97b4f326e5543","after":"2b258392333a88557be6567fa44a1902e4c3bcbc","ref":"refs/heads/hawqs-api","pushedAt":"2024-02-20T22:43:56.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"HAWQS Linkages initial draft, pending testing.","shortMessageHtmlLink":"HAWQS Linkages initial draft, pending testing."}},{"before":"1944d74f51e0d223050c967fdd899c4687d22512","after":"90e875f6185e88475aa3791e5db97b4f326e5543","ref":"refs/heads/hawqs-api","pushedAt":"2024-02-20T17:13:04.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"In-progress multi-segment work and HAWQS linkage","shortMessageHtmlLink":"In-progress multi-segment work and HAWQS linkage"}},{"before":"a4f780d2937831a6269535d0145f7d8202a33868","after":"1944d74f51e0d223050c967fdd899c4687d22512","ref":"refs/heads/hawqs-api","pushedAt":"2024-02-12T19:25:59.000Z","pushType":"push","commitsCount":6,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Merge remote-tracking branch 'origin/dev' into hawqs-api","shortMessageHtmlLink":"Merge remote-tracking branch 'origin/dev' into hawqs-api"}},{"before":"c478fb3711fb3795e3f1c88db8947428bb564dc7","after":"a4f780d2937831a6269535d0145f7d8202a33868","ref":"refs/heads/hawqs-api","pushedAt":"2024-02-09T23:20:05.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Updates to MultSegForm GUI to handle the two possible data-linkage flows from NWM or from HAWQS\nUpdates to HTML forms to display relevant HUC14s.\nAdditional interface testing and debugging.","shortMessageHtmlLink":"Updates to MultSegForm GUI to handle the two possible data-linkage fl…"}},{"before":"b82538ced31eda36a3452dad3c0a61895b78dafc","after":"c478fb3711fb3795e3f1c88db8947428bb564dc7","ref":"refs/heads/hawqs-api","pushedAt":"2024-02-07T02:32:07.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"AQ_Sim_2D.cs:  Added public async Task<string> ReadWBGeoJSON(string WBcomid) to read HUC geometry from web service\nAnimals.cs:  Fixed units for endogenous respiration parameter\nAQForm.cs:  Some temporary HAWQS API testing code to be removed soon\nMultiSegForm.cs, NewSimForm.cs, HTML files:  Some major changes to the interface, a work in progress, working towards HAWQS integration","shortMessageHtmlLink":"AQ_Sim_2D.cs: Added public async Task&lt;string&gt; ReadWBGeoJSON(string WB…"}},{"before":"a0060a2f813872c5a763d3d9679218b1873fd01b","after":"4d4c13dfd751a718aa22b55a73df8f01792bd69a","ref":"refs/heads/dev","pushedAt":"2024-01-22T16:14:40.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"dbsmith88","name":"Deron Smith","path":"/dbsmith88","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/14054467?s=80&v=4"},"commit":{"message":"Trigger action","shortMessageHtmlLink":"Trigger action"}},{"before":"8d4a6ef4d13bf9502311bde25ab4cab91d7f5b76","after":"bad64fe749b637035854ce606e7a9a84840b5850","ref":"refs/heads/simulated-annealing","pushedAt":"2023-12-11T14:30:30.000Z","pushType":"push","commitsCount":4,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"next round of annealing updates for developing Alpine Lakes (now) including in general GUI (later?)\n\nFour rotifer parameters included in annealing calculation\nAlpine Lakes model runs, calculates error and saves output for all simulations including bioassays to quickly evaluate calibration quality.\nnon-random simulation starts calculates first error and starting point with unchanged simulation.\nbullet proof crash on OutputForm.cs","shortMessageHtmlLink":"next round of annealing updates for developing Alpine Lakes (now) inc…"}},{"before":"856d65a135238e88f93a39cb704a523891eff86b","after":"b82538ced31eda36a3452dad3c0a61895b78dafc","ref":"refs/heads/hawqs-api","pushedAt":"2023-11-29T16:37:38.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Working file set for off-site backup.\n\nRenders HUC14 data from tiles.  Searches for HUC14 based on click using optimized point-in-polygon routine.","shortMessageHtmlLink":"Working file set for off-site backup."}},{"before":"b9181b8f9c68d4ed6ac80f247159e3d49648d512","after":"a0060a2f813872c5a763d3d9679218b1873fd01b","ref":"refs/heads/dev","pushedAt":"2023-11-14T13:10:04.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"dbsmith88","name":"Deron Smith","path":"/dbsmith88","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/14054467?s=80&v=4"},"commit":{"message":"Update Dockerfile","shortMessageHtmlLink":"Update Dockerfile"}},{"before":"73022072cd46364dda7ea4c57f5a1dd38fd362f5","after":"856d65a135238e88f93a39cb704a523891eff86b","ref":"refs/heads/hawqs-api","pushedAt":"2023-11-10T16:27:36.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Intermediate commit that includes working code snippets that will\n\tRun HAWQS through TAMU API asynchronously and update progress bar with the status of the run, and also enable cancelation\n\tPass HUC14 GeoJSON data into the New Simulation Form leaflet app and display it with an efficient GeoJSON tiler (geojson-vt)","shortMessageHtmlLink":"Intermediate commit that includes working code snippets that will"}},{"before":"6aa7a84a5529379f506960477b3aaf0390f3effe","after":"b9181b8f9c68d4ed6ac80f247159e3d49648d512","ref":"refs/heads/dev","pushedAt":"2023-10-23T19:51:36.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Updated new simulation map so that the rendering of the lake shapefile (when zoomed out too far) does not cause a significant interface lag.  Set up a separate lake/reservoir zoom threshold and only render the map when closer to that.  Updated on-screen directions to reflect this change.","shortMessageHtmlLink":"Updated new simulation map so that the rendering of the lake shapefil…"}},{"before":"49ea6743de2e69305f05fbf51eb5ff504eac5f4d","after":"6aa7a84a5529379f506960477b3aaf0390f3effe","ref":"refs/heads/dev","pushedAt":"2023-10-20T14:44:47.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"jsclough","name":"Jonathan Clough","path":"/jsclough","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/22919369?s=80&v=4"},"commit":{"message":"Changed all web-server references from qedcloud.net to ceamdev.ceeopdev.net.  This is a temporary fix until rererence to HMS web servers are removed from the project.\nMultiSegForm.  Put deserializeobject into try catch block so that deserialization errors are trapped (if there is something unexpected in the JSON string).\nTurned off error trapping that raised an error if the maps were rendering too slowly.  Will eventually limit map rendering based on zoom level to avoid this problem.\nRenamed and added files so the test directory (TestDir1) default study will be available to the user.","shortMessageHtmlLink":"Changed all web-server references from qedcloud.net to ceamdev.ceeopd…"}}],"hasNextPage":true,"hasPreviousPage":false,"activityType":"all","actor":null,"timePeriod":"all","sort":"DESC","perPage":30,"cursor":"djE6ks8AAAAEMgTS-QA","startCursor":null,"endCursor":null}},"title":"Activity · quanted/hms"}