[ISSUE]: Jak and Daxter: The Precursor Legacy pausing every 1-2 seconds - OPL 2063 ETH

[pbsk8]

Checks

• I have checked existing OPL issues for duplicates and found none
• I am using either OPL latest stable version, or archived version or OPL beta version

Describe the issue

Jak and Daxter - The Precursor Legacy [SCUS_971.24]

OPL 2063 via ETH

PS2 Slim (SCPH-90010)

With modes 1,3 and 6 enabled only, game freezes on intro logo

If disabling pad emu, game works fine until first CGs then starts pausing every 1-2 seconds. In game, same pausing issues continues.

Console model

SCPH-90010

OPL version / revision

2063

In which device(s) have you experienced this issue?

SMB

Context and extra information

Jak and Daxter - The Precursor Legacy [SCUS_971.24]

[ButtonBasher92]

Just tested, works fine with v1.2.0-Beta-2068 (one of the first releases, later releases to current of 2068 are broken) had to enable only modes 3 and 6 to get it to work but runs smooth there after. SCPH-90008 MX4SIO Jack and Daxter Precursor Legacy (USA)

…

On Sat, 20 Jan 2024, 16:38 Evandro ***@***.***> wrote: Checks - I have checked existing *OPL issues* <https://github.com/ps2homebrew/Open-PS2-Loader/issues> for duplicates and found none - I am using either OPL latest stable version <https://github.com/ps2homebrew/Open-PS2-Loader/releases/latest>, or archived version <https://mega.nz/folder/Ndwi1bAK#oLWNhH_g-h0p4BoT4c556A> or *OPL beta version* <https://github.com/ps2homebrew/open-ps2-loader/releases> Describe the issue Jak and Daxter - The Precursor Legacy [SCUS_971.24] OPL 2063 via ETH PS2 Slim (SCPH-90010) With modes 1,3 and 6 enabled only, game freezes on intro logo If disabling pad emu, game works fine until first CGs then starts pausing every 1-2 seconds. In game, same pausing issues continues. Console model SCPH-90010 OPL version / revision 2063 In which device(s) have you experienced this issue? SMB Context and extra information Jak and Daxter - The Precursor Legacy [SCUS_971.24] — Reply to this email directly, view it on GitHub <#1171>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BEOXDU7ALQS63ZAVM7D2K63YPPJG3AVCNFSM6AAAAABCDHSZ6KVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4TEMBXG4ZTOMI> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[pbsk8]

Just tested, works fine with v1.2.0-Beta-2068 (one of the first releases, later releases to current of 2068 are broken) had to enable only modes 3 and 6 to get it to work but runs smooth there after. SCPH-90008 MX4SIO Jack and Daxter Precursor Legacy (USA)
…
On Sat, 20 Jan 2024, 16:38 Evandro @.> wrote: Checks - I have checked existing OPL issues https://github.com/ps2homebrew/Open-PS2-Loader/issues for duplicates and found none - I am using either OPL latest stable version https://github.com/ps2homebrew/Open-PS2-Loader/releases/latest, or archived version https://mega.nz/folder/Ndwi1bAK#oLWNhH_g-h0p4BoT4c556A or OPL beta version https://github.com/ps2homebrew/open-ps2-loader/releases Describe the issue Jak and Daxter - The Precursor Legacy [SCUS_971.24] OPL 2063 via ETH PS2 Slim (SCPH-90010) With modes 1,3 and 6 enabled only, game freezes on intro logo If disabling pad emu, game works fine until first CGs then starts pausing every 1-2 seconds. In game, same pausing issues continues. Console model SCPH-90010 OPL version / revision 2063 In which device(s) have you experienced this issue? SMB Context and extra information Jak and Daxter - The Precursor Legacy [SCUS_971.24] — Reply to this email directly, view it on GitHub <#1171>, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEOXDU7ALQS63ZAVM7D2K63YPPJG3AVCNFSM6AAAAABCDHSZ6KVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4TEMBXG4ZTOMI . You are receiving this because you are subscribed to this thread.Message ID: @.>

Unfortunately releases 2068 and 2065 dont work for me via ETH, when I set to auto it freezes the console on main menu. That's why I had to go back to 2063. Could you provide a link for this first relase so I make sure it is the same version I tried?

[ButtonBasher92]

ETH is also broken in the version I am using unfortunately. Only thing working is BDM devices, MX4SIO and USB. I am sure the Devs are aware of what's been going on with the latest releases and are working on fixes.

…

On Sat, 20 Jan 2024, 18:36 Evandro ***@***.***> wrote: Just tested, works fine with v1.2.0-Beta-2068 (one of the first releases, later releases to current of 2068 are broken) had to enable only modes 3 and 6 to get it to work but runs smooth there after. SCPH-90008 MX4SIO Jack and Daxter Precursor Legacy (USA) … <#m_-6072367032791273791_> On Sat, 20 Jan 2024, 16:38 Evandro *@*.*> wrote: Checks - I have checked existing OPL issues https://github.com/ps2homebrew/Open-PS2-Loader/issues <https://github.com/ps2homebrew/Open-PS2-Loader/issues> for duplicates and found none - I am using either OPL latest stable version https://github.com/ps2homebrew/Open-PS2-Loader/releases/latest <https://github.com/ps2homebrew/Open-PS2-Loader/releases/latest>, or archived version https://mega.nz/folder/Ndwi1bAK#oLWNhH_g-h0p4BoT4c556A <https://mega.nz/folder/Ndwi1bAK#oLWNhH_g-h0p4BoT4c556A> or OPL beta version https://github.com/ps2homebrew/open-ps2-loader/releases <https://github.com/ps2homebrew/open-ps2-loader/releases> Describe the issue Jak and Daxter - The Precursor Legacy [SCUS_971.24] OPL 2063 via ETH PS2 Slim (SCPH-90010) With modes 1,3 and 6 enabled only, game freezes on intro logo If disabling pad emu, game works fine until first CGs then starts pausing every 1-2 seconds. In game, same pausing issues continues. Console model SCPH-90010 OPL version / revision 2063 In which device(s) have you experienced this issue? SMB Context and extra information Jak and Daxter - The Precursor Legacy [SCUS_971.24] — Reply to this email directly, view it on GitHub <#1171 <#1171>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEOXDU7ALQS63ZAVM7D2K63YPPJG3AVCNFSM6AAAAABCDHSZ6KVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4TEMBXG4ZTOMI <https://github.com/notifications/unsubscribe-auth/BEOXDU7ALQS63ZAVM7D2K63YPPJG3AVCNFSM6AAAAABCDHSZ6KVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4TEMBXG4ZTOMI> . You are receiving this because you are subscribed to this thread.Message ID: @.*> Unfortunately releases 2068 and 2065 dont work for me via ETH, when I set to auto it freezes the console on main menu. That's why I had to go back to 2063. Could you provide a link for this first relase so I make sure it is the same version I tried? — Reply to this email directly, view it on GitHub <#1171 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BEOXDU7R2Z446MNVZAZJK6LYPPXA3AVCNFSM6AAAAABCDHSZ6KVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMBSGE3DSOBZHE> . You are receiving this because you commented.Message ID: ***@***.***>

[10522]

@pbsk8, try OPL Beta 1.2.0 2049. Also check out this report.

[pbsk8]

Still not working with 2049, run1342.

Even worse now because as soon as first cutscene shows, it appears PAUSE on screen.

modes 3 and 6 and pademu off (gsm is already off by default)

[ButtonBasher92]

Still not working with 2049, run1342.

Even worse now because as soon as first cutscene shows, it appears PAUSE on screen.

modes 3 and 6 and pademu off (gsm is already off by default)

Have you tried the latest beta build 2070?
This build seems to have resolved a lot of issues. I still had to enable modes 3 and 6 to get it to run but runs smooth with MX4SIO, have not tried ETH.