BoardConfig.mk

#
# Copyright (C) 2014 Prashant Gahlot (proxthehacker@gmail.com)
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

-include vendor/motorola/condor/BoardConfigVendor.mk

LOCAL_PATH := device/motorola/condor

BOARD_VENDOR := motorola-qcom

TARGET_SPECIFIC_HEADER_PATH := $(LOCAL_PATH)/include

# Platform
TARGET_BOARD_PLATFORM_GPU := qcom-adreno302
TARGET_BOARD_PLATFORM := msm8610

# Architecture
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_CPU_SMP := true
TARGET_CPU_MEMCPY_BASE_OPT_DISABLE := true
TARGET_ARCH := arm
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_CPU_VARIANT := krait

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := MSM8610
TARGET_NO_BOOTLOADER := true

# Kernel
BOARD_KERNEL_SEPARATED_DT := true
BOARD_CUSTOM_BOOTIMG_MK := $(LOCAL_PATH)/mkbootimg.mk
TARGET_KERNEL_SOURCE := kernel/motorola/msm8610
TARGET_KERNEL_CONFIG := cm_condor_defconfig
BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_PAGESIZE := 2048

BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 utags.blkdev=/dev/block/platform/msm_sdcc.1/by-name/utags vmalloc=400M androidboot.write_protect=0

BOARD_MKBOOTIMG_ARGS := --ramdisk_offset 0x01000000 --tags_offset 0x00000100


WLAN_MODULES:
	mkdir -p $(KERNEL_MODULES_OUT)/pronto
	mv $(KERNEL_MODULES_OUT)/wlan.ko $(KERNEL_MODULES_OUT)/pronto/pronto_wlan.ko
	ln -sf /system/lib/modules/pronto/pronto_wlan.ko $(TARGET_OUT)/lib/modules/wlan.ko

TARGET_KERNEL_MODULES += WLAN_MODULES

# Lights
TARGET_PROVIDES_LIBLIGHT := true

# GPS
TARGET_NO_RPC := true

# Use qcom power hal
TARGET_POWERHAL_VARIANT := qcom

# Global flags
COMMON_GLOBAL_CFLAGS += -DMOTOROLA_UIDS -DQCOM_HARDWARE
TARGET_USES_MOTOROLA_LOG := true
TARGET_NR_SVC_SUPP_GIDS := 32

# Display
BOARD_EGL_CFG := $(LOCAL_PATH)/egl.cfg
USE_OPENGL_RENDERER := true
TARGET_USES_ION := true
NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
OVERRIDE_RS_DRIVER := libRSDriver_adreno.so
MAX_EGL_CACHE_KEY_SIZE := 12*1024
MAX_EGL_CACHE_SIZE := 2048*1024

# Wifi
BOARD_HAS_QCOM_WLAN := true
BOARD_WLAN_DEVICE := qcwcn
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_qcwcn
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_qcwcn
WIFI_DRIVER_MODULE_PATH := "/system/lib/modules/wlan.ko"
WIFI_DRIVER_MODULE_NAME := "wlan"
WPA_SUPPLICANT_VERSION := VER_0_8_X

# Audio
BOARD_USES_ALSA_AUDIO := true
AUDIO_FEATURE_ENABLED_FM := true
AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
USES_OLD_DEEP_BUFFER_COUNT_VALUE := true

# FM
TARGET_QCOM_NO_FM_FIRMWARE := true

# Qualcomm support
BOARD_USES_QCOM_HARDWARE := true
BOARD_USES_QC_TIME_SERVICES := true

# Encryption
TARGET_HW_DISK_ENCRYPTION := true

# Bluetooth
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_QCOM := true
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(LOCAL_PATH)/bluetooth
BLUETOOTH_HCI_USE_MCT := true

# Build
TARGET_SYSTEMIMAGE_USE_SQUISHER := true

# Storage & partiiton
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true
BOARD_BOOTIMAGE_PARTITION_SIZE := 10444800
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 10526720
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 939524096
BOARD_USERDATAIMAGE_PARTITION_SIZE := 2356543488
BOARD_CACHEIMAGE_PARTITION_SIZE := 476184576
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_FLASH_BLOCK_SIZE := 131072

# Vold
BOARD_VOLD_DISC_HAS_MULTIPLE_MAJORS := true
BOARD_VOLD_EMMC_SHARES_DEV_MAJOR := true
BOARD_VOLD_MAX_PARTITIONS := 40
TARGET_USE_CUSTOM_LUN_FILE_PATH := /sys/devices/platform/msm_hsusb/gadget/lun%d/file

# Asserts
TARGET_OTA_ASSERT_DEVICE := xt1021,xt1022,xt1023,condor_umts,condor_umtsds,condor

# Init
TARGET_INIT_VENDOR_LIB := libinit_condor
TARGET_UNIFIED_DEVICE := true

# Recovery
TARGET_RECOVERY_FSTAB := $(LOCAL_PATH)/ramdisk/fstab.qcom
BOARD_HAS_NO_SELECT_BUTTON := true
HAVE_SELINUX := true

# SELinux
include device/qcom/sepolicy/sepolicy.mk

BOARD_SEPOLICY_DIRS += \
    device/motorola/condor/sepolicy

BOARD_SEPOLICY_UNION += \
    atvc.te \
    batt_health.te \
    device.te \
    file.te \
    file_contexts \
    hw_revs.te \
    init.te \
    init_shell.te \
    keystore.te \
    mediaserver.te \
    mm-qcamerad.te \
    mpdecision.te \
    platform_app.te \
    property_contexts \
    property.te \
    system_app.te \
    system_init.te \
    system_server.te \
    rild.te \
    rmt_storage.te \
    thermal-engine.te \
    ueventd.te \
    vold.te

MALLOC_IMPL := dlmalloc

# Enable dex-preoptimization to speed up first boot sequence
ifeq ($(HOST_OS),linux)
  ifeq ($(TARGET_BUILD_VARIANT),user)
    ifeq ($(WITH_DEXPREOPT),)
      WITH_DEXPREOPT := true
      WITH_DEXPREOPT_BOOT_IMG_ONLY := false
    endif
  endif
endif
WITH_DEXPREOPT_BOOT_IMG_ONLY ?= true

# Include an expanded selection of fonts
EXTENDED_FONT_FOOTPRINT := true