diff --git a/i18n/qfield_ar.ts b/i18n/qfield_ar.ts
index 6a986415d2..158839afec 100644
--- a/i18n/qfield_ar.ts
+++ b/i18n/qfield_ar.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooser
- جهاز التموضع مشغول:
+ جهاز التموضع مشغول:
@@ -149,7 +149,7 @@
- البحث
+ البحث
@@ -163,23 +163,23 @@ Cancel to make a minimal device scan instead.
- تم الاتصال إلى %1
+ تم الاتصال إلى %1
- جار الاتصال بـ %1
+ جار الاتصال بـ %1
- اتصال إلى %1
+ اتصال إلى %1
- جار الاتصال إلى %1
+ جار الاتصال إلى %1
- استخدام الارتفاع التقديري من الجهاز
+ استخدام الارتفاع التقديري من الجهاز
@@ -191,7 +191,7 @@ Cancel to make a minimal device scan instead.
- غير محدد
+ غير محدد
@@ -210,7 +210,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModel
- الجهاز الداخلي
+ الجهاز الداخلي
@@ -287,19 +287,19 @@ Cancel to make a minimal device scan instead.
- عرض
+ عرض
- طول
+ طول
- X
+ X
- X
+ X
@@ -426,19 +426,19 @@ Cancel to make a minimal device scan instead.
- ساعات
+ ساعات
- دقائق
+ دقائق
- ثوان
+ ثوان
- حسناً
+ حسناً
@@ -616,7 +616,7 @@ Cancel to make a minimal device scan instead.
- تم إهمال التغيرات الأخيرة
+ تم إهمال التغيرات الأخيرة
@@ -740,7 +740,7 @@ The features geometries will be combined into feature '%1', which will
- ضبط الميزة كملاحة
+ ضبط الميزة كملاحة
@@ -812,15 +812,15 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilter
- إذهب إلي %1 %2 (خريطة CRS)
+ إذهب إلي %1 %2 (خريطة CRS)
- ضبط نقطة الملاحة
+ ضبط نقطة الملاحة
- إذهب إلي %1 %2 (WGS84)
+ إذهب إلي %1 %2 (WGS84)
@@ -909,7 +909,7 @@ The features geometries will be combined into feature '%1', which will
- إعادة تحميل البيانات
+ إعادة تحميل البيانات
@@ -929,11 +929,11 @@ The features geometries will be combined into feature '%1', which will
- طبقات القراءة فقط
+ طبقات القراءة فقط
- طبقة مقفولة الرسم
+ طبقة مقفولة الرسم
@@ -1002,7 +1002,7 @@ The features geometries will be combined into feature '%1', which will
- لا يمكن إضافة ميزة جديدة في الطبقة %1
+ لا يمكن إضافة ميزة جديدة في الطبقة %1
@@ -1078,18 +1078,18 @@ The features geometries will be combined into feature '%1', which will
LocatorItem
- جار البحث ...
+ جار البحث ...LocatorSettings
- إعدادات البحث
+ إعدادات البحث
- التشغيل بدون بادئة
+ التشغيل بدون بادئة
@@ -1218,11 +1218,11 @@ The features geometries will be combined into feature '%1', which will
- جار طباعة أطلس الميزة (ات) على كملف PDF
+ جار طباعة أطلس الميزة (ات) على كملف PDF
- تم طباعة أطلس الميزاة (ات) بنجاح إلى ملف PDF وتم وحفظه في مستنداتك
+ تم طباعة أطلس الميزاة (ات) بنجاح إلى ملف PDF وتم وحفظه في مستنداتك
@@ -1249,7 +1249,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationView
- طول.
+ طول.
@@ -1257,11 +1257,11 @@ The features geometries will be combined into feature '%1', which will
- عرض.
+ عرض.
- النقطة الوسطى
+ النقطة الوسطى
@@ -1326,7 +1326,7 @@ The features geometries will be combined into feature '%1', which will
- تم إهمال التغيرات الأخيرة
+ تم إهمال التغيرات الأخيرة
@@ -1337,15 +1337,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilities
- تحديد ملف الوسائط
+ تحديد ملف الوسائط
- صور JPEG (*.jpg *.jpeg)
+ صور JPEG (*.jpg *.jpeg)
- فشل حفظ معرض الصور
+ فشل حفظ معرض الصور
@@ -1408,71 +1408,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationView
- طول.
+ طول.
- غير محدد
+ غير محدد
- X
+ X
- عرض.
+ عرض.
- عرض
+ عرض
- X
+ X
- طول
+ طول
- الارتفاع
+ الارتفاع
- السرعة
+ السرعة
- الدقة العامودية
+ الدقة العامودية
- الدقة الأفقية
+ الدقة الأفقية
- PDOP
+ PDOP
- HDOP
+ HDOP
- VDOP
+ VDOP
- صالح
+ صالح
- العثور
+ العثور
- الجودة
+ الجودة
@@ -1673,7 +1673,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLogin
- فشل تسجيل الدخول
+ فشل تسجيل الدخول
@@ -1715,15 +1715,15 @@ The features geometries will be combined into feature '%1', which will
- تسجيل الخروج
+ تسجيل الخروج
- جار تسجيل الدخول، يرجى الانتظار
+ جار تسجيل الدخول، يرجى الانتظار
- تسجيل الدخول
+ تسجيل الدخول
@@ -1738,11 +1738,11 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudPackageLayersFeedback
- جار حزم طبقة QFieldCloud المتعطلة
+ جار حزم طبقة QFieldCloud المتعطلة
- لم يتم تحزيم بعض الطبقات بنجاح على QFieldCloud. ربما تحوي إعدادات خاطئة أو لا يمكن الوصول إلى مصدر البيانات من خلال QFieldCloud.
+ لم يتم تحزيم بعض الطبقات بنجاح على QFieldCloud. ربما تحوي إعدادات خاطئة أو لا يمكن الوصول إلى مصدر البيانات من خلال QFieldCloud.
@@ -1853,7 +1853,7 @@ The features geometries will be combined into feature '%1', which will
- استرجاع كل الميزات المُعدلة في الطبقات المحلية. لن تستطيع التراجع عن هذه التغيرات.
+ استرجاع كل الميزات المُعدلة في الطبقات المحلية. لن تستطيع التراجع عن هذه التغيرات.Connect to %1
- اتصال إلى %1
+ اتصال إلى %1Connecting to %1
@@ -2471,7 +2471,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- سيتم تصحيح قيم Z التي تم تسجيلها من جهاز تحديد المواقع بهذه القيمة. إذا تم إدخال قيمة 1.6 ، فسيؤدي ذلك إلى تصحيح -1.6 لكل قيمة مسجلة.
+ سيتم تصحيح قيم Z التي تم تسجيلها من جهاز تحديد المواقع بهذه القيمة. إذا تم إدخال قيمة 1.6 ، فسيؤدي ذلك إلى تصحيح -1.6 لكل قيمة مسجلة.Skip altitude correction
@@ -2769,7 +2769,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- تحميل الخط %1
+ تحميل الخط %1
@@ -2830,7 +2830,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- تدوير لوحة الخريطة غير مدعوم. إعادة التعيين من %1 إلى 0.
+ تدوير لوحة الخريطة غير مدعوم. إعادة التعيين من %1 إلى 0.
@@ -2934,7 +2934,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- جار تحضير QField ، هذه عملية لمرة واحدة وقد تستغرق بعض الوقت
+ جار تحضير QField ، هذه عملية لمرة واحدة وقد تستغرق بعض الوقت
@@ -3041,11 +3041,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- التسجيل عند وقوع ضمن الحدود الفعّالة
+ التسجيل عند وقوع ضمن الحدود الفعّالةWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- عند التمكين ، يتم تسجيل الرؤوس فقط عند استيفاء القيود النشطة. إذا تم تعطيل الإعداد ، ستؤدي القيود الفردية التي تم الوفاء بها إلى تشغيل إضافة قمة.
+ عند التمكين ، يتم تسجيل الرؤوس فقط عند استيفاء القيود النشطة. إذا تم تعطيل الإعداد ، ستؤدي القيود الفردية التي تم الوفاء بها إلى تشغيل إضافة قمة.Start tracking
@@ -3053,7 +3053,7 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- لا يمكن بدء التعقب بقيمة فارغة
+ لا يمكن بدء التعقب بقيمة فارغةWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
@@ -3252,11 +3252,11 @@ Cancel to make a minimal device scan instead.
Base map project
- مشورع الخريطة الأساسية
+ مشورع الخريطة الأساسيةBase Map Project
- مشورع الخريطة الأساسية
+ مشورع الخريطة الأساسيةRemove from Recent Projects
@@ -3264,7 +3264,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- مرحبًا بك في QField. هل هذه أول مرة تستخدم هذا التطبيق؟ جرب عينة من المشاريع المُدرجة في القائمة أدناه.
+ مرحبًا بك في QField. هل هذه أول مرة تستخدم هذا التطبيق؟ جرب عينة من المشاريع المُدرجة في القائمة أدناه.Welcome back to QField.
@@ -3434,11 +3434,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- تم تفعيل التموضع
+ تم تفعيل التموضعPositioning turned off
- تم إطفاء التموضع
+ تم إطفاء التموضعCanvas stopped following location
@@ -3466,7 +3466,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- جار الطباعة إلى ملف PDF
+ جار الطباعة إلى ملف PDFGo to Home Screen
@@ -3478,7 +3478,7 @@ Cancel to make a minimal device scan instead.
Open Project
- فتح مشورع
+ فتح مشورعSettings
@@ -3494,7 +3494,7 @@ Cancel to make a minimal device scan instead.
Select template below
- تحديد القالب من الأسفل
+ تحديد القالب من الأسفلActivating positioning service
@@ -3518,7 +3518,7 @@ Cancel to make a minimal device scan instead.
Add Bookmark at Coordinates
- إضافة علامة مرجعية عند الإحداثيات
+ إضافة علامة مرجعية عند الإحداثياتUntitled bookmark
@@ -3526,7 +3526,7 @@ Cancel to make a minimal device scan instead.
Set Coordinates as Destination
- ضبط الإحداثيات كوجهة
+ ضبط الإحداثيات كوجهةCopy Coordinates
@@ -3534,11 +3534,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3550,27 +3550,27 @@ Cancel to make a minimal device scan instead.
0.25m Precision
- الدقة 0.25 م
+ الدقة 0.25 م0.5m Precision
- الدقة 0.5 م
+ الدقة 0.5 م1m Precision
- الدقة 1 م
+ الدقة 1 م2.5m Precision
- الدقة 2.5 م
+ الدقة 2.5 م5m Precision
- الدقة 5 م
+ الدقة 5 م10m Precision
- الدقة 10 م
+ الدقة 10 مAlways Show Precise View
@@ -3598,7 +3598,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- ضبط كوجهة
+ ضبط كوجهةNavigation Options
@@ -3634,11 +3634,11 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- التوسيط إلى الموقع الحالي
+ التوسيط إلى الموقع الحاليAdd Bookmark at Current Location
- إضافة علامة مرجيعة عند الموقع الحالي
+ إضافة علامة مرجيعة عند الموقع الحاليCurrent location unknown
@@ -3650,7 +3650,7 @@ Cancel to make a minimal device scan instead.
Copy Current Location
- نسخ الموقع الحالي
+ نسخ الموقع الحاليAccuracy
@@ -3678,7 +3678,7 @@ Cancel to make a minimal device scan instead.
Logged out
- تم تسجيل الخروج
+ تم تسجيل الخروجConnecting...
@@ -3686,7 +3686,7 @@ Cancel to make a minimal device scan instead.
Logged in
- تم تسجيل الدخول
+ تم تسجيل الدخولProject %1 failed to download
diff --git a/i18n/qfield_bg.ts b/i18n/qfield_bg.ts
index 46187aba38..60b30c29fd 100644
--- a/i18n/qfield_bg.ts
+++ b/i18n/qfield_bg.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Използвано позициониращо устройство:
+ Използвано позициониращо устройство:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Търси
+ ТърсиMake a full service discovery
@@ -163,23 +163,23 @@ Cancel to make a minimal device scan instead.
Connected to %1
- Установена връзка с %1
+ Установена връзка с %1Connect to %1
- Свържи с %1
+ Свържи с %1Connect to %1
- Свържи с %1
+ Свържи с %1Connecting to %1
- Свързване с %1
+ Свързване с %1Use orthometric altitude from device
- Използвай ортометричнана надморска височина от устройството
+ Използвай ортометричнана надморска височина от устройствотоSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancel to make a minimal device scan instead.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- Вградено устройство
+ Вградено устройство
@@ -233,31 +233,31 @@ Cancel to make a minimal device scan instead.
Could not find the remote host
- Отдалечения хост не е открит
+ Отдалечения хост не е откритCould not find the service UUID on remote host
- Услуг с такова UUID не може да бъде открита на отдалечения хост
+ Услуг с такова UUID не може да бъде открита на отдалечения хостAttempt to read or write from socket returned an error
- Грешка при четене или писане от сокета
+ Грешка при четене или писане от сокетаThe protocol is not supported on this platform
- Протоколът не се поддържа на тази платформа
+ Протоколът не се поддържа на тази платформаAn operation was attempted while the socket was in a state that did not permit it
- Състоянието на сокета не позволява опитаната операция
+ Състоянието на сокета не позволява опитаната операцияThe remote host closed the connection
- Отдалечения хост затвори изградената връзка
+ Отдалечения хост затвори изградената връзкаUnknown error
- Неразпозната грешка
+ Неразпозната грешка
@@ -287,19 +287,19 @@ Cancel to make a minimal device scan instead.
Lon
- Дълж.
+ Дълж.Lat
- Шир.
+ Шир.X
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancel to make a minimal device scan instead.
Hours
- Часове
+ ЧасовеMinutes
- Минути
+ МинутиSeconds
- Секунди
+ СекундиOK
- ОК
+ ОК
@@ -616,7 +616,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- Последните промени са отменени
+ Последните промени са отменениSuccessfully duplicated feature
@@ -744,7 +744,7 @@ The features geometries will be combined into feature '%1', which will
Set feature as navigation
- Използвай обекта като навигация
+ Използвай обекта като навигацияFeature has no geometry
@@ -816,15 +816,15 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Върви на %1 %2 (CRS на картата)
+ Върви на %1 %2 (CRS на картата)Set navigation point
- Настрой точка за навигация
+ Настрой точка за навигацияGo to %1° %2° (WGS84)
- Върви на %1 %2° (WGS84)
+ Върви на %1 %2° (WGS84)Go to coordinate
@@ -913,7 +913,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- Обнови данните
+ Обнови даннитеReload of layer %1 triggered
@@ -933,11 +933,11 @@ The features geometries will be combined into feature '%1', which will
Read-Only Layer
- Слой само за четене
+ Слой само за четенеGeometry Locked Layer
- Слой със заключена геометрия
+ Слой със заключена геометрияThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1006,7 +1006,7 @@ The features geometries will be combined into feature '%1', which will
Cannot add new feature in layer "%1".
- Неуспешно добавяне на нов обект в слой "%1".
+ Неуспешно добавяне на нов обект в слой "%1".
@@ -1082,18 +1082,18 @@ The features geometries will be combined into feature '%1', which will
LocatorItemSearch…
- Търсене...
+ Търсене...LocatorSettingsSearch Settings
- Настройки за търсене
+ Настройки за търсенеTrigger without its prefix
- Търси без префикс
+ Търси без префиксSearch Bar Settings
@@ -1222,11 +1222,11 @@ The features geometries will be combined into feature '%1', which will
Printing atlas feature(s) to PDF
- Принтиране на обектите на атласа в PDF
+ Принтиране на обектите на атласа в PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Обектите на атласа са успешно принтирани в PDF и съхранени в твоите документи
+ Обектите на атласа са успешно принтирани в PDF и съхранени в твоите документиPrint Atlas Feature(s) to Image
@@ -1253,7 +1253,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- Шир.
+ Шир.X
@@ -1261,11 +1261,11 @@ The features geometries will be combined into feature '%1', which will
Lon.
- Дълж.
+ Дълж.centroid
- центроид
+ центроидLon
@@ -1330,7 +1330,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- Последните промени са отменени
+ Последните промени са отменениConstraints not valid
@@ -1341,15 +1341,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- Избор на мултимедиен файл
+ Избор на мултимедиен файлJPEG images (*.jpg *.jpeg)
- JPEG изображения (*.jpg *.jpeg)
+ JPEG изображения (*.jpg *.jpeg)Failed to save gallery picture
- Неуспешен запис на изображение от галерията
+ Неуспешен запис на изображение от галериятаOpen File
@@ -1412,71 +1412,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- Шир.
+ Шир.N/A
- N/A
+ N/AX
- X
+ XLon.
- Дълж.
+ Дълж.Lon
- Дълж.
+ Дълж.Y
- Y
+ YLat
- Шир.
+ Шир.Altitude
- Височина
+ ВисочинаSpeed
- Скорост
+ СкоростH. Accuracy
- Хор. точност
+ Хор. точностV. Accuracy
- Верт. точност
+ Верт. точностPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Валидност
+ ВалидностFix
- Поправка
+ ПоправкаQuality
- Качество
+ Качество
@@ -1677,7 +1677,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- Неуспешно влизане
+ Неуспешно влизанеFailed to sign in
@@ -1719,15 +1719,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- Излизане
+ ИзлизанеLogging in, please wait
- Влизане, моля, изчакай
+ Влизане, моля, изчакайLogin
- Влизане
+ ВлизанеThe easiest way to transfer you project from QGIS to your devices!
@@ -1742,11 +1742,11 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Проблеми при пакетирането на QFieldCloud слой.
+ Проблеми при пакетирането на QFieldCloud слой.Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Някои слоеве не са пакетирани успешно в QFieldCloud. Тези слоеве може да не са настроени правилно или техните данни да не са достъпни от сървъра на QFieldCloud.
+ Някои слоеве не са пакетирани успешно в QFieldCloud. Тези слоеве може да не са настроени правилно или техните данни да не са достъпни от сървъра на QFieldCloud.QFieldCloud had troubles packaging your project
@@ -1857,7 +1857,7 @@ The features geometries will be combined into feature '%1', which will
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Отказване на промените за всички обекти на слоевете в облака. Тези промени не могат да бъдат възстановени!
+ Отказване на промените за всички обекти на слоевете в облака. Тези промени не могат да бъдат възстановени!The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1905,7 +1905,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- %n прикачени файл се качва на фонов режим.%n прикачени файла се качват на фонов режим.
+ %n прикачени файл се качва на фонов режим.%n прикачени файла се качват на фонов режим.Should local changes be reverted?
@@ -1940,32 +1940,32 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Неуспешно експортиране
+ Неуспешно експортиранеPackaged layer '%1' is not valid: '%2'
- Пакетираният слой '%1' е невалиден: '%2'
+ Пакетираният слой '%1' е невалиден: '%2'Failed to open temporary file for "%1", reason:
%2
- Неуспешно отваряне на временен файл за "%1", причина:
+ Неуспешно отваряне на временен файл за "%1", причина:
%2Failed to upload attachment stored at "%1", reason:
%2
- Неуспешно качване на прикачен файл "%1", причина:
+ Неуспешно качване на прикачен файл "%1", причина:
%2Failed to download file "%1", reason:
- Неуспешно изтегляне на файл "%1", причина:
+ Неуспешно изтегляне на файл "%1", причина:
%2Failed to write downloaded file stored at "%1", fs reason:
- Неуспешно записване на изтегления файл "%1", причина от файловата система:
+ Неуспешно записване на изтегления файл "%1", причина от файловата система:
%2
@@ -2037,7 +2037,7 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to upload attachment stored at `%1`, reason:
%2
- Неуспешно качване на прикачен файл "%1", причина:
+ Неуспешно качване на прикачен файл "%1", причина:
%2
@@ -2323,7 +2323,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- При активиране, яркостта на екрана ще бъде намалена след 20 секунди на неактивност, за да се пести енергия.
+ При активиране, яркостта на екрана ще бъде намалена след 20 секунди на неактивност, за да се пести енергия.Consider mouse as a touchscreen device
@@ -2379,36 +2379,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Търсене на свързани устройства
+ Търсене на свързани устройстваScanning failed: %1
- Търсенето неуспешно: %1
+ Търсенето неуспешно: %1Scanning done
- Приключено търсене
+ Приключено търсене%n device(s) found
- %n намерено устройство%n намерени устройства
+ %n намерено устройство%n намерени устройстваScanning canceled
- Прекъснато търсене
+ Прекъснато търсенеScan
- Търси
+ ТърсиMake a full service discovery
- Пълно търсене на устройства
+ Пълно търсене на устройстваA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Пълното търсене на устройства може да отнеме известно време. Наистина ли желаете да направите пълно търсене?
+ Пълното търсене на устройства може да отнеме известно време. Наистина ли желаете да направите пълно търсене?
Откажи за бързо търсене.
@@ -2417,7 +2417,7 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Свържи с %1
+ Свържи с %1Connecting to %1
@@ -2477,7 +2477,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Z стойностите, които са получени от устройството за позициониране ще бъдат коригиране с тази стойност. Например, ако е избрана стойност от 1,6, резултатът ще бъде, че всяка стойност ще бъде намалена с 1,6 м.
+ Z стойностите, които са получени от устройството за позициониране ще бъдат коригиране с тази стойност. Например, ако е избрана стойност от 1,6, резултатът ще бъде, че всяка стойност ще бъде намалена с 1,6 м. Skip altitude correction
@@ -2775,7 +2775,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- Зареждане на локалния шрифт %1
+ Зареждане на локалния шрифт %1
@@ -2836,7 +2836,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Обертання полотна карти не підтримується. Скидання з %1 до 0.
+ Обертання полотна карти не підтримується. Скидання з %1 до 0.
@@ -2940,7 +2940,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Подготовка на QField, това е еднократка операция, която може да отнеме известно време
+ Подготовка на QField, това е еднократка операция, която може да отнеме известно време
@@ -3047,11 +3047,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- Запиши, когато всички активни ограничения са изпълнени
+ Запиши, когато всички активни ограничения са изпълнениWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- При активиране, възлите ще бъдат записани само когато всички активни ограничения са изпълнени. При деактивиране, всяко отделно ограничение ще предизвика добавяне на възел.
+ При активиране, възлите ще бъдат записани само когато всички активни ограничения са изпълнени. При деактивиране, всяко отделно ограничение ще предизвика добавяне на възел.Start tracking
@@ -3059,11 +3059,11 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- Не може да проследява с празни стойности
+ Не може да проследява с празни стойностиWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- Когато и двете ограничения са изключени, добавянето на вертекси ще се случва всеки път, когато се получат от позиционираото устройство.
+ Когато и двете ограничения са изключени, добавянето на вертекси ще се случва всеки път, когато се получат от позиционираото устройство.Measure (M) value attached to vertices:
@@ -3258,11 +3258,11 @@ Cancel to make a minimal device scan instead.
Base map project
- Проект картна-основа
+ Проект картна-основаBase Map Project
- Проект картна-основа
+ Проект картна-основаRemove from Recent Projects
@@ -3270,7 +3270,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Добре дошли в QField! Използвате приложението за пръв път? Опитайте някой от примерните проекти в списъка по-долу.
+ Добре дошли в QField! Използвате приложението за пръв път? Опитайте някой от примерните проекти в списъка по-долу.Welcome back to QField.
@@ -3440,11 +3440,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- Позиционирането е активирано
+ Позиционирането е активираноPositioning turned off
- Позиционирането е изключено
+ Позиционирането е изключеноCanvas stopped following location
@@ -3472,7 +3472,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- Създай PDF
+ Създай PDFGo to Home Screen
@@ -3484,7 +3484,7 @@ Cancel to make a minimal device scan instead.
Open Project
- Отвори проект
+ Отвори проектSettings
@@ -3500,7 +3500,7 @@ Cancel to make a minimal device scan instead.
Select template below
- Избери някой от шаблоните
+ Избери някой от шаблонитеActivating positioning service
@@ -3524,7 +3524,7 @@ Cancel to make a minimal device scan instead.
Add Bookmark at Coordinates
- Добави отметка на координати
+ Добави отметка на координатиUntitled bookmark
@@ -3532,7 +3532,7 @@ Cancel to make a minimal device scan instead.
Set Coordinates as Destination
- Използвай координатите като дестинация
+ Използвай координатите като дестинацияCopy Coordinates
@@ -3540,11 +3540,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3556,27 +3556,27 @@ Cancel to make a minimal device scan instead.
0.25m Precision
- 0,25 m прецизност
+ 0,25 m прецизност0.5m Precision
- 0,5 m прецизност
+ 0,5 m прецизност1m Precision
- 1 m прецизност
+ 1 m прецизност2.5m Precision
- 2,5 m прецизност
+ 2,5 m прецизност5m Precision
- 5 m прецизност
+ 5 m прецизност10m Precision
- 10 m прецизност
+ 10 m прецизностAlways Show Precise View
@@ -3604,7 +3604,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- Използвай като дестинация
+ Използвай като дестинацияNavigation Options
@@ -3640,11 +3640,11 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- Центриране до текущата локация
+ Центриране до текущата локацияAdd Bookmark at Current Location
- Добави отметка на текущата локация
+ Добави отметка на текущата локацияCurrent location unknown
@@ -3656,7 +3656,7 @@ Cancel to make a minimal device scan instead.
Copy Current Location
- Копирай текущата локация
+ Копирай текущата локацияAccuracy
@@ -3684,7 +3684,7 @@ Cancel to make a minimal device scan instead.
Logged out
- Невписан
+ НевписанConnecting...
@@ -3692,7 +3692,7 @@ Cancel to make a minimal device scan instead.
Logged in
- Вписан
+ ВписанProject %1 failed to download
@@ -3716,7 +3716,7 @@ Cancel to make a minimal device scan instead.
Positioning error: %1
- Грешка в позиционирането: %1
+ Грешка в позиционирането: %1Azimuth
diff --git a/i18n/qfield_bs.ts b/i18n/qfield_bs.ts
index 9076a032a3..ee6ce2f567 100644
--- a/i18n/qfield_bs.ts
+++ b/i18n/qfield_bs.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Lociranje uređaja:
+ Lociranje uređaja:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Skeniranje
+ SkeniranjeMake a full service discovery
@@ -162,7 +162,7 @@ Cancel to make a minimal device scan instead.
Connected to %1
- Povezano na %1
+ Povezano na %1Connect to %1
@@ -170,15 +170,15 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Poveži na %1
+ Poveži na %1Connecting to %1
- Povezivanje na %1
+ Povezivanje na %1Use orthometric altitude from device
- Koristi ortometrijsku visinu sa uređaja
+ Koristi ortometrijsku visinu sa uređajaSelect the Bluetooth device from the list below:
@@ -190,7 +190,7 @@ Cancel to make a minimal device scan instead.
N/A
- Nije dostupno
+ Nije dostupnoBluetooth device address:
@@ -209,7 +209,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- Interni uređaj
+ Interni uređaj
@@ -286,19 +286,19 @@ Cancel to make a minimal device scan instead.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -425,19 +425,19 @@ Cancel to make a minimal device scan instead.
Hours
- Sati
+ SatiMinutes
- Minute
+ MinuteSeconds
- Sekunde
+ SekundeOK
- OK
+ OK
@@ -615,7 +615,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- Poništene zadnje promjene
+ Poništene zadnje promjeneSuccessfully duplicated feature
@@ -745,7 +745,7 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
Set feature as navigation
- Postavi objekat kao navigaciju
+ Postavi objekat kao navigacijuFeature has no geometry
@@ -817,15 +817,15 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Idi na %1 %2 (CRS karte)
+ Idi na %1 %2 (CRS karte)Set navigation point
- Postavi navigacijsku tačku
+ Postavi navigacijsku tačkuGo to %1° %2° (WGS84)
- Idi na %1° %2° (WGS84)
+ Idi na %1° %2° (WGS84)Go to coordinate
@@ -914,7 +914,7 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
Reload data
- Ponovo učitaj podatke
+ Ponovo učitaj podatkeReload of layer %1 triggered
@@ -934,11 +934,11 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
Read-Only Layer
- Sloj samo za čitanje
+ Sloj samo za čitanjeGeometry Locked Layer
- Sloj sa zaključanom geometrijom
+ Sloj sa zaključanom geometrijomThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1007,7 +1007,7 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
Cannot add new feature in layer "%1".
- Nije moguće dodati objekat na sloju "%1".
+ Nije moguće dodati objekat na sloju "%1".
@@ -1083,18 +1083,18 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
LocatorItemSearch…
- Traženje...
+ Traženje...LocatorSettingsSearch Settings
- Postavke pretrage
+ Postavke pretrageTrigger without its prefix
- Okidač bez prefiksa
+ Okidač bez prefiksaSearch Bar Settings
@@ -1223,11 +1223,11 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
Printing atlas feature(s) to PDF
- Štampj objekat(a) Atlasa u PDF
+ Štampj objekat(a) Atlasa u PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Atlas objekti su uspješno štampani u PDF i smješteni u dokument
+ Atlas objekti su uspješno štampani u PDF i smješteni u dokumentPrint Atlas Feature(s) to Image
@@ -1254,7 +1254,7 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1262,7 +1262,7 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
Lon.
- Lon.
+ Lon.centroid
@@ -1331,7 +1331,7 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
Last changes discarded
- Poništene zadnje promjene
+ Poništene zadnje promjeneConstraints not valid
@@ -1342,15 +1342,15 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
PlatformUtilitiesSelect Media File
- Odaberi fajl multimedija
+ Odaberi fajl multimedijaJPEG images (*.jpg *.jpeg)
- JPEG slike (*.jpg *.jpeg)
+ JPEG slike (*.jpg *.jpeg)Failed to save gallery picture
- Nije uspjelo snimanje slike
+ Nije uspjelo snimanje slikeOpen File
@@ -1413,71 +1413,71 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- Nije dostupno
+ Nije dostupnoX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Visina
+ VisinaSpeed
- Brzina
+ BrzinaH. Accuracy
- H. tačnost
+ H. tačnostV. Accuracy
- V. tačnost
+ V. tačnostPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Valjano
+ ValjanoFix
- Fiksirano
+ FiksiranoQuality
- Kvalitet
+ Kvalitet
@@ -1678,7 +1678,7 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
QFieldCloudLoginFailed to login
- Nije moguća prijava
+ Nije moguća prijavaFailed to sign in
@@ -1720,15 +1720,15 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
Logout
- Izlaz
+ IzlazLogging in, please wait
- Prijavljivanje, molim da sečekate
+ Prijavljivanje, molim da sečekateLogin
- Prijava
+ PrijavaThe easiest way to transfer you project from QGIS to your devices!
@@ -1743,11 +1743,11 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Problematično pakovanje QFieldCloud sloja
+ Problematično pakovanje QFieldCloud slojaSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Neki slojevi nisu korektno zapakovani na QFieldCloud.
+ Neki slojevi nisu korektno zapakovani na QFieldCloud.QFieldCloud had troubles packaging your project
@@ -1858,7 +1858,7 @@ Geometrija objekata će se kombinovati u objekat '%1', koji će zadrž
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Vraća sve promijenjene objekte u lokalnim slojevima. Ne možete vratiti ove promjene.
+ Vraća sve promijenjene objekte u lokalnim slojevima. Ne možete vratiti ove promjene.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1906,7 +1906,7 @@ Iako i dalje možete pregledati i koristiti ovaj projekat, strogo je preporučiv
%n attachment(s) are currently being uploaded in the background.
- %n prilog(a) se trenutno šalje u pozadini.%n prilog(a) se trenutno šalje u pozadini.%n prilog(a) se trenutno šalje u pozadini.
+ %n prilog(a) se trenutno šalje u pozadini.%n prilog(a) se trenutno šalje u pozadini.%n prilog(a) se trenutno šalje u pozadini.Should local changes be reverted?
@@ -1941,31 +1941,31 @@ Iako i dalje možete pregledati i koristiti ovaj projekat, strogo je preporučiv
QFieldCloudProjectsModelExport failed
- Eksport nije uspio
+ Eksport nije uspioPackaged layer '%1' is not valid: '%2'
- Pakovanje sloja '%1' nije validno: '%2'
+ Pakovanje sloja '%1' nije validno: '%2'Failed to open temporary file for "%1", reason:
%2
- Nije uspjelo otvaranje privremenog fajla za "%1", razlog:
+ Nije uspjelo otvaranje privremenog fajla za "%1", razlog:
%2Failed to upload attachment stored at "%1", reason:
%2
- Nije uspjelo prebacivanje priloga pohranjenog na "%1", razlog:
+ Nije uspjelo prebacivanje priloga pohranjenog na "%1", razlog:
%2Failed to download file "%1", reason:
- Nije uspjelo skidanje fajla "%1", razlog:
+ Nije uspjelo skidanje fajla "%1", razlog:Failed to write downloaded file stored at "%1", fs reason:
- Nije uspjelo skidanje fajla pohranjenog na "%1", razlog:
+ Nije uspjelo skidanje fajla pohranjenog na "%1", razlog:aborted
@@ -2036,7 +2036,7 @@ Iako i dalje možete pregledati i koristiti ovaj projekat, strogo je preporučiv
Failed to upload attachment stored at `%1`, reason:
%2
- Nije uspjelo dodavanje priloga u `%1`, razlog:
+ Nije uspjelo dodavanje priloga u `%1`, razlog:
%2
@@ -2322,7 +2322,7 @@ Iako i dalje možete pregledati i koristiti ovaj projekat, strogo je preporučiv
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Ako je uključeno, ekran će biti zatamnjen nakon 20 sekundi nekorištenja radi štednje baterije.
+ Ako je uključeno, ekran će biti zatamnjen nakon 20 sekundi nekorištenja radi štednje baterije.Consider mouse as a touchscreen device
@@ -2378,36 +2378,36 @@ Iako i dalje možete pregledati i koristiti ovaj projekat, strogo je preporučiv
Scanning for paired devices
- Skeniranje za uparenim uređajima
+ Skeniranje za uparenim uređajimaScanning failed: %1
- Skeniranje nije uspjelo: %1
+ Skeniranje nije uspjelo: %1Scanning done
- Skeniranje završeno
+ Skeniranje završeno%n device(s) found
- %n uređaj(a) pronađeno%n uređaj(a) pronađeno%n uređaj(a) pronađeno
+ %n uređaj(a) pronađeno%n uređaj(a) pronađeno%n uređaj(a) pronađenoScanning canceled
- Skeniranje otkazano
+ Skeniranje otkazanoScan
- Skeniranje
+ SkeniranjeMake a full service discovery
- Učini punu uslugu
+ Učini punu usluguA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Puno skeniranje uređaja može trajati duže. Jeste li sigurni? Otkažite da napravite minimalno skeniranje.
+ Puno skeniranje uređaja može trajati duže. Jeste li sigurni? Otkažite da napravite minimalno skeniranje.Connected to %1
@@ -2415,7 +2415,7 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Poveži na %1
+ Poveži na %1Connecting to %1
@@ -2475,7 +2475,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Z vrijednost koja je snimljena sa uređaja će biti popravljena za ovu vrijednost. Ako je unesena vrijednost 1.6 , to će rezultirati korekcijom od -1.6 za svaku snimljenu vrijednost.
+ Z vrijednost koja je snimljena sa uređaja će biti popravljena za ovu vrijednost. Ako je unesena vrijednost 1.6 , to će rezultirati korekcijom od -1.6 za svaku snimljenu vrijednost.Skip altitude correction
@@ -2773,7 +2773,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- Učitavanje fonta %1
+ Učitavanje fonta %1
@@ -2834,7 +2834,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Rotacije kanvasa karte nije podržana. Resetovanje sa %1 na 0.
+ Rotacije kanvasa karte nije podržana. Resetovanje sa %1 na 0.
@@ -2938,7 +2938,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Prirema se QField, ova operacija se radi samo jednom i može potrajati
+ Prirema se QField, ova operacija se radi samo jednom i može potrajati
@@ -3045,11 +3045,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- Snimaj kada su oba ograničenja aktivna
+ Snimaj kada su oba ograničenja aktivnaWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Kada je omogućeno, tačke se mogu snimati samo uz oba ograničenja. Kada je onemogućeno, pojedina ograničenja mogu omogućiti dodavanje tačaka.
+ Kada je omogućeno, tačke se mogu snimati samo uz oba ograničenja. Kada je onemogućeno, pojedina ograničenja mogu omogućiti dodavanje tačaka.Start tracking
@@ -3057,7 +3057,7 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- Nije moguće pokreuti snimanje sa praznim vrijednostima
+ Nije moguće pokreuti snimanje sa praznim vrijednostimaWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
@@ -3256,11 +3256,11 @@ Cancel to make a minimal device scan instead.
Base map project
- Projekat osnovne karte
+ Projekat osnovne karteBase Map Project
- Projekat osnovne karte
+ Projekat osnovne karteRemove from Recent Projects
@@ -3268,7 +3268,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Dobrodošli u QField. Prvi put koristite aplikaciju? Probajte neki od primjera projekata sa donje liste.
+ Dobrodošli u QField. Prvi put koristite aplikaciju? Probajte neki od primjera projekata sa donje liste.Welcome back to QField.
@@ -3438,11 +3438,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- Aktivirano lociranje
+ Aktivirano lociranjePositioning turned off
- Lociranje isključeno
+ Lociranje isključenoCanvas stopped following location
@@ -3470,7 +3470,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- Štampa u PDF
+ Štampa u PDFGo to Home Screen
@@ -3482,7 +3482,7 @@ Cancel to make a minimal device scan instead.
Open Project
- Otvori projekat
+ Otvori projekatSettings
@@ -3498,7 +3498,7 @@ Cancel to make a minimal device scan instead.
Select template below
- Izaberite predložak
+ Izaberite predložakActivating positioning service
@@ -3522,7 +3522,7 @@ Cancel to make a minimal device scan instead.
Add Bookmark at Coordinates
- Dodaj zabilješku na koordinatama
+ Dodaj zabilješku na koordinatamaUntitled bookmark
@@ -3530,7 +3530,7 @@ Cancel to make a minimal device scan instead.
Set Coordinates as Destination
- Postavi koordinate kao odredište
+ Postavi koordinate kao odredišteCopy Coordinates
@@ -3538,11 +3538,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3602,7 +3602,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- Postavi kao odredište
+ Postavi kao odredišteNavigation Options
@@ -3638,11 +3638,11 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- Centar na trenutnu lokaciju
+ Centar na trenutnu lokacijuAdd Bookmark at Current Location
- Dodaj zabilješku na trenutnoj lokaciji
+ Dodaj zabilješku na trenutnoj lokacijiCurrent location unknown
@@ -3654,7 +3654,7 @@ Cancel to make a minimal device scan instead.
Copy Current Location
- Kopiraj trenutnu lokaciju
+ Kopiraj trenutnu lokacijuAccuracy
@@ -3682,7 +3682,7 @@ Cancel to make a minimal device scan instead.
Logged out
- Odjavljen
+ OdjavljenConnecting...
@@ -3690,7 +3690,7 @@ Cancel to make a minimal device scan instead.
Logged in
- Prijavljen
+ PrijavljenProject %1 failed to download
diff --git a/i18n/qfield_cs.ts b/i18n/qfield_cs.ts
index 1dc6ce2453..010a699509 100644
--- a/i18n/qfield_cs.ts
+++ b/i18n/qfield_cs.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Používaná zařízení určení polohy:
+ Používaná zařízení určení polohy: Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Skenovat
+ SkenovatMake a full service discovery
@@ -163,23 +163,23 @@ Zrušte pro jen minimální skenování zařízení.
Connected to %1
- Připojeno k %1
+ Připojeno k %1Connect to %1
- Připojit k %1
+ Připojit k %1Connect to %1
- Připojit k %1
+ Připojit k %1Connecting to %1
- Připojení k %1
+ Připojení k %1Use orthometric altitude from device
- Použití ortometrické výšky ze zařízení
+ Použití ortometrické výšky ze zařízeníSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Zrušte pro jen minimální skenování zařízení.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Zrušte pro jen minimální skenování zařízení.
BluetoothDeviceModelInternal device
- Vnitřní zařízeni
+ Vnitřní zařízeni
@@ -233,31 +233,31 @@ Zrušte pro jen minimální skenování zařízení.
Could not find the remote host
- Vzdálený hostitel nenalezen
+ Vzdálený hostitel nenalezenCould not find the service UUID on remote host
- Nenalezeno servisní UUID na vzdáleném hostiteli
+ Nenalezeno servisní UUID na vzdáleném hostiteliAttempt to read or write from socket returned an error
- Pokus o čtení nebo zápis z/do socketu vrátil chybu
+ Pokus o čtení nebo zápis z/do socketu vrátil chybuThe protocol is not supported on this platform
- Protokol není na této platformě podporován
+ Protokol není na této platformě podporovánAn operation was attempted while the socket was in a state that did not permit it
- Požadavek na operaci, kterou stav socketu nedovoluje
+ Požadavek na operaci, kterou stav socketu nedovolujeThe remote host closed the connection
- Vzdálený hostitel ukončil spojení
+ Vzdálený hostitel ukončil spojeníUnknown error
- Neznámá chyba
+ Neznámá chyba
@@ -287,19 +287,19 @@ Zrušte pro jen minimální skenování zařízení.
Lon
- Zem. dél.
+ Zem. dél.Lat
- Zem. šíř.
+ Zem. šíř.X
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Zrušte pro jen minimální skenování zařízení.
Hours
- Hodin
+ HodinMinutes
- Minut
+ MinutSeconds
- Vteřin
+ VteřinOK
- OK
+ OK
@@ -616,7 +616,7 @@ Zrušte pro jen minimální skenování zařízení.
Last changes discarded
- Poslední změny byly zrušeny
+ Poslední změny byly zrušenySuccessfully duplicated feature
@@ -820,15 +820,15 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Jít na %1 %2 (Map CRS)
+ Jít na %1 %2 (Map CRS)Set navigation point
- Nastavit průjezdní bod
+ Nastavit průjezdní bodGo to %1° %2° (WGS84)
- Jít na %1° %2° (WGS84)
+ Jít na %1° %2° (WGS84)Go to coordinate
@@ -917,7 +917,7 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
Reload data
- Znovu načíst data
+ Znovu načíst dataReload of layer %1 triggered
@@ -937,11 +937,11 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
Read-Only Layer
- Vrstva pouze pro čtení
+ Vrstva pouze pro čteníGeometry Locked Layer
- Vrstva s uzamčenou geometrií
+ Vrstva s uzamčenou geometriíThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1010,7 +1010,7 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
Cannot add new feature in layer "%1".
- Nelze přidat nový prvek ve vrstvě "%1"
+ Nelze přidat nový prvek ve vrstvě "%1"
@@ -1086,18 +1086,18 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
LocatorItemSearch…
- Hledat...
+ Hledat...LocatorSettingsSearch Settings
- Nastavení vyhledávání
+ Nastavení vyhledáváníTrigger without its prefix
- Vyvolat bez zadání prefixu
+ Vyvolat bez zadání prefixuSearch Bar Settings
@@ -1226,15 +1226,15 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
Printing atlas feature(s) to PDF
- Tisknu prvek(prvky) atlasu do PDF
+ Tisknu prvek(prvky) atlasu do PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Prvky atlasu úspěšně vytištěné do PDF a umístěné v dokumentu (dokumentech)
+ Prvky atlasu úspěšně vytištěné do PDF a umístěné v dokumentu (dokumentech)Print Atlas Feature(s) to Image
- Tisk prvku(ů) atlasu do obrázku
+ Tisk prvku(ů) atlasu do obrázkuPrint Atlas Feature to Image
@@ -1257,7 +1257,7 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
NavigationInformationViewLat.
- Zem. šíř.
+ Zem. šíř.X
@@ -1265,7 +1265,7 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
Lon.
- Zem. dél.
+ Zem. dél.centroid
@@ -1334,7 +1334,7 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
Last changes discarded
- Poslední změny byly zrušeny
+ Poslední změny byly zrušenyConstraints not valid
@@ -1345,15 +1345,15 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
PlatformUtilitiesSelect Media File
- Vyberte mediální soubor
+ Vyberte mediální souborJPEG images (*.jpg *.jpeg)
- JPEG obrázky (*.jpg *.jpeg)
+ JPEG obrázky (*.jpg *.jpeg)Failed to save gallery picture
- Obrázek galerie se nepodařilo uložit
+ Obrázek galerie se nepodařilo uložitOpen File
@@ -1397,7 +1397,7 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
Audio files (*.mp3 *.aac *.ogg)
- Zvukové soubory (*.mp3 *.aac *.ogg)
+ Zvukové soubory (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1416,71 +1416,71 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
PositionInformationViewLat.
- Zem. šíř.
+ Zem. šíř.N/A
- N/A
+ N/AX
- X
+ XLon.
- Zem. dél.
+ Zem. dél.Lon
- Zem. dél.
+ Zem. dél.Y
- Y
+ YLat
- Zem. šíř.
+ Zem. šíř.Altitude
- Nadmořská výška
+ Nadmořská výškaSpeed
- Rychlost
+ RychlostH. Accuracy
- H. Přesnost
+ H. PřesnostV. Accuracy
- V. Přesnost
+ V. PřesnostPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Platné
+ PlatnéFix
- Oprava
+ OpravaQuality
- Kvalita
+ Kvalita
@@ -1510,7 +1510,7 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1681,7 +1681,7 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
QFieldCloudLoginFailed to login
- Přihlášení selhalo
+ Přihlášení selhaloFailed to sign in
@@ -1722,15 +1722,15 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
Logout
- Odhlášení
+ OdhlášeníLogging in, please wait
- Přihlašuji, prosím čekejte
+ Přihlašuji, prosím čekejteLogin
- Přihlásit
+ PřihlásitThe easiest way to transfer you project from QGIS to your devices!
@@ -1749,7 +1749,7 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Některé vrstvy nebyly v QFieldCloudu správně zabaleny. Tyto vrstvy mohou být špatně nakonfigurovány nebo jejich zdroj dat není přístupný ze serveru QFieldCloud.
+ Některé vrstvy nebyly v QFieldCloudu správně zabaleny. Tyto vrstvy mohou být špatně nakonfigurovány nebo jejich zdroj dat není přístupný ze serveru QFieldCloud.QFieldCloud had troubles packaging your project
@@ -1860,7 +1860,7 @@ Geometrie objektů budou zkombinovány do objektu '%1', který si zach
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Vrátit všechny změněné prvky v místních vrstvách mraku. Tyto změny nelze obnovit.
+ Vrátit všechny změněné prvky v místních vrstvách mraku. Tyto změny nelze obnovit.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1908,7 +1908,7 @@ Projekt sice můžete stále prohlížet a používat, ale důrazně doporučuje
%n attachment(s) are currently being uploaded in the background.
- %n příloha je právě nahrávána na pozadí.%n přílohy jsou právě nahrávány na pozadí.%n příloh je právě nahráváno na pozadí.%n příloh(y) je/jsou právě nahráváno/y na pozadí.
+ %n příloha je právě nahrávána na pozadí.%n přílohy jsou právě nahrávány na pozadí.%n příloh je právě nahráváno na pozadí.%n příloh(y) je/jsou právě nahráváno/y na pozadí.Should local changes be reverted?
@@ -1943,31 +1943,31 @@ Projekt sice můžete stále prohlížet a používat, ale důrazně doporučuje
QFieldCloudProjectsModelExport failed
- Export se nezdařil
+ Export se nezdařilPackaged layer '%1' is not valid: '%2'
- Zabalená vrstva '%1' není platná: '%2'
+ Zabalená vrstva '%1' není platná: '%2'Failed to open temporary file for "%1", reason:
%2
- Nepodařilo se otevřít dočasný soubor pro "%1", důvod:
+ Nepodařilo se otevřít dočasný soubor pro "%1", důvod:
%2Failed to upload attachment stored at "%1", reason:
%2
- Nepodařilo se nahrát přílohu uloženou na "%1", důvod:
+ Nepodařilo se nahrát přílohu uloženou na "%1", důvod:
%2Failed to download file "%1", reason:
- Nepodařilo se stáhnout soubor "%1", důvod:
+ Nepodařilo se stáhnout soubor "%1", důvod:Failed to write downloaded file stored at "%1", fs reason:
- Nepodařilo se zapsat stažený soubor uložený na "%1", důvod fs:
+ Nepodařilo se zapsat stažený soubor uložený na "%1", důvod fs:aborted
@@ -2038,7 +2038,7 @@ Projekt sice můžete stále prohlížet a používat, ale důrazně doporučuje
Failed to upload attachment stored at `%1`, reason:
%2
- Nepodařilo se nahrát přílohu uloženou na "%1", důvod:
+ Nepodařilo se nahrát přílohu uloženou na "%1", důvod:
%2
@@ -2324,7 +2324,7 @@ Projekt sice můžete stále prohlížet a používat, ale důrazně doporučuje
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Při zaškrtnutí bude pro úsporu baterie jas obrazovky snížen po 20 sekundách nečinnosti
+ Při zaškrtnutí bude pro úsporu baterie jas obrazovky snížen po 20 sekundách nečinnostiConsider mouse as a touchscreen device
@@ -2380,36 +2380,36 @@ Projekt sice můžete stále prohlížet a používat, ale důrazně doporučuje
Scanning for paired devices
- Vyhledávání spárovaných zařízení
+ Vyhledávání spárovaných zařízeníScanning failed: %1
- Skenování selhalo: %1
+ Skenování selhalo: %1Scanning done
- Skenování dokončeno
+ Skenování dokončeno%n device(s) found
- %n zařízení nalezeno%n zařízení nalezena%n zařízení nalezeno%n zařízení nalezeno
+ %n zařízení nalezeno%n zařízení nalezena%n zařízení nalezeno%n zařízení nalezenoScanning canceled
- Skenování zrušeno
+ Skenování zrušenoScan
- Skenovat
+ SkenovatMake a full service discovery
- Spustit úplné vyhledání služeb
+ Spustit úplné vyhledání služebA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Plné skenování zařízení může trvat déle. Opravdu to chcete?
+ Plné skenování zařízení může trvat déle. Opravdu to chcete?
Zrušte pro jen minimální skenování zařízení.
@@ -2418,7 +2418,7 @@ Zrušte pro jen minimální skenování zařízení.
Connect to %1
- Připojit k %1
+ Připojit k %1Connecting to %1
@@ -2478,7 +2478,7 @@ Zrušte pro jen minimální skenování zařízení.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Hodnoty Z zaznamenané z přijímače polohy budou opraveny o tuto hodnotu. Pokud je zadáno 1.6, výsledkem bude korekce -1.6 pro každou zaznamenanou hodnotu.
+ Hodnoty Z zaznamenané z přijímače polohy budou opraveny o tuto hodnotu. Pokud je zadáno 1.6, výsledkem bude korekce -1.6 pro každou zaznamenanou hodnotu. Skip altitude correction
@@ -2776,7 +2776,7 @@ Zrušte pro jen minimální skenování zařízení.
Loading font %1
- Načítání písma %1
+ Načítání písma %1
@@ -2837,7 +2837,7 @@ Zrušte pro jen minimální skenování zařízení.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Rotace plochy mapy není podporována. Resetuje se z %1 na 0.
+ Rotace plochy mapy není podporována. Resetuje se z %1 na 0.
@@ -2941,7 +2941,7 @@ Zrušte pro jen minimální skenování zařízení.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Připravuji QField, toto je jednorázová operace, která může nějakou dobu trvat
+ Připravuji QField, toto je jednorázová operace, která může nějakou dobu trvat
@@ -2983,7 +2983,7 @@ Zrušte pro jen minimální skenování zařízení.
The connection was refused by the remote hose
- Připojení bylo odmítnuto vzdáleným hostitelem
+ Připojení bylo odmítnuto vzdáleným hostitelemUDP receiver error (%1)
@@ -3048,11 +3048,11 @@ Zrušte pro jen minimální skenování zařízení.
Record when both active constraints are met
- Zaznamenat při splnění obou podmínek
+ Zaznamenat při splnění obou podmínekWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Pokud je zapnuto, vrchol bude zaznamenán v jen případě splnění obou aktivních omezení. Pokud je nastavení vypnuto, vyvolá přidání vrcholu splnění kterékoliv z podmínek.
+ Pokud je zapnuto, vrchol bude zaznamenán v jen případě splnění obou aktivních omezení. Pokud je nastavení vypnuto, vyvolá přidání vrcholu splnění kterékoliv z podmínek. Start tracking
@@ -3060,11 +3060,11 @@ Zrušte pro jen minimální skenování zařízení.
Cannot start track with empty values
- Nelze spustit trasu s prázdnými hodnotami
+ Nelze spustit trasu s prázdnými hodnotamiWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- Když jsou obě podmínky vypnuté, vrcholy jsou přidávány tak často, jak přicházejí z přijímače polohy.
+ Když jsou obě podmínky vypnuté, vrcholy jsou přidávány tak často, jak přicházejí z přijímače polohy. Measure (M) value attached to vertices:
@@ -3170,7 +3170,7 @@ Zrušte pro jen minimální skenování zařízení.
The connection was refused by the remote hose
- Připojení bylo odmítnuto vzdáleným hostitelem
+ Připojení bylo odmítnuto vzdáleným hostitelemUDP receiver error (%1)
@@ -3259,11 +3259,11 @@ Zrušte pro jen minimální skenování zařízení.
Base map project
- Projekt podkladové mapy
+ Projekt podkladové mapyBase Map Project
- Projekt podkladové mapy
+ Projekt podkladové mapyRemove from Recent Projects
@@ -3271,7 +3271,7 @@ Zrušte pro jen minimální skenování zařízení.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Vítejte v QField. Používáte tuto aplikaci poprvé? Vyzkoušejte ukázkové projekty se seznamu níže.
+ Vítejte v QField. Používáte tuto aplikaci poprvé? Vyzkoušejte ukázkové projekty se seznamu níže.Welcome back to QField.
@@ -3441,11 +3441,11 @@ Zrušte pro jen minimální skenování zařízení.
Positioning activated
- Určení polohy je aktivováno
+ Určení polohy je aktivovánoPositioning turned off
- Určení polohy je vypnuto
+ Určení polohy je vypnutoCanvas stopped following location
@@ -3473,7 +3473,7 @@ Zrušte pro jen minimální skenování zařízení.
Printing to PDF
- Tisk do PDF
+ Tisk do PDFGo to Home Screen
@@ -3485,7 +3485,7 @@ Zrušte pro jen minimální skenování zařízení.
Open Project
- Otevřít projekt
+ Otevřít projektSettings
@@ -3501,7 +3501,7 @@ Zrušte pro jen minimální skenování zařízení.
Select template below
- Vyberte níže uvedenou šablonu
+ Vyberte níže uvedenou šablonuActivating positioning service
@@ -3525,7 +3525,7 @@ Zrušte pro jen minimální skenování zařízení.
Add Bookmark at Coordinates
- Přidat záložku na souřadnice
+ Přidat záložku na souřadniceUntitled bookmark
@@ -3533,7 +3533,7 @@ Zrušte pro jen minimální skenování zařízení.
Set Coordinates as Destination
- Nastavit souřadnice jako cíl
+ Nastavit souřadnice jako cílCopy Coordinates
@@ -3541,11 +3541,11 @@ Zrušte pro jen minimální skenování zařízení.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3557,27 +3557,27 @@ Zrušte pro jen minimální skenování zařízení.
0.25m Precision
- Přesnost 0,25m
+ Přesnost 0,25m0.5m Precision
- Přesnost 0,5m
+ Přesnost 0,5m1m Precision
- Přesnost 1m
+ Přesnost 1m2.5m Precision
- Přesnost 2,5m
+ Přesnost 2,5m5m Precision
- Přesnost 5m
+ Přesnost 5m10m Precision
- Přesnost 10m
+ Přesnost 10mAlways Show Precise View
@@ -3605,7 +3605,7 @@ Zrušte pro jen minimální skenování zařízení.
Set As Destination
- Nastavit jako cíl
+ Nastavit jako cílNavigation Options
@@ -3641,11 +3641,11 @@ Zrušte pro jen minimální skenování zařízení.
Center to Current Location
- Vycentrovat na aktuální polohu
+ Vycentrovat na aktuální polohuAdd Bookmark at Current Location
- Přidat záložku pro aktuální polohu
+ Přidat záložku pro aktuální polohuCurrent location unknown
@@ -3657,7 +3657,7 @@ Zrušte pro jen minimální skenování zařízení.
Copy Current Location
- Kopírovat aktuální polohu
+ Kopírovat aktuální polohuAccuracy
@@ -3685,7 +3685,7 @@ Zrušte pro jen minimální skenování zařízení.
Logged out
- Odhlášeno
+ OdhlášenoConnecting...
@@ -3693,7 +3693,7 @@ Zrušte pro jen minimální skenování zařízení.
Logged in
- Přihlášeno
+ PřihlášenoProject %1 failed to download
@@ -3717,7 +3717,7 @@ Zrušte pro jen minimální skenování zařízení.
Positioning error: %1
- Chyba určení polohy: %1
+ Chyba určení polohy: %1Azimuth
@@ -3729,7 +3729,7 @@ Zrušte pro jen minimální skenování zařízení.
Print to Image
- Tisk do obrázku
+ Tisk do obrázkuPrinting...
diff --git a/i18n/qfield_de.ts b/i18n/qfield_de.ts
index 18712f235c..5780f57d3e 100644
--- a/i18n/qfield_de.ts
+++ b/i18n/qfield_de.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Positionierungsgerät in Benutzung:
+ Positionierungsgerät in Benutzung:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Scan
+ ScanMake a full service discovery
@@ -163,23 +163,23 @@ Abbrechen um einen minimalen Scan durchzuführen.
Connected to %1
- Verbunden mit %1
+ Verbunden mit %1Connect to %1
- Verbinden zu %1
+ Verbinden zu %1Connect to %1
- Verbinden mit %1
+ Verbinden mit %1Connecting to %1
- Verbindung zu %1 wird durchgeführt
+ Verbindung zu %1 wird durchgeführtUse orthometric altitude from device
- Orthometrische Höhe vom Gerät verwenden
+ Orthometrische Höhe vom Gerät verwendenSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
N/A
- N. a.
+ N. a.Bluetooth device address:
@@ -210,7 +210,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
BluetoothDeviceModelInternal device
- Interne antenne
+ Interne antenne
@@ -233,31 +233,31 @@ Abbrechen um einen minimalen Scan durchzuführen.
Could not find the remote host
- Kann den Remote Host nicht finden
+ Kann den Remote Host nicht findenCould not find the service UUID on remote host
- Kann den UUID Service auf dem Remote Host nicht finden
+ Kann den UUID Service auf dem Remote Host nicht findenAttempt to read or write from socket returned an error
- Fehler beim Lesen oder Schreiben an diesem Anschluss
+ Fehler beim Lesen oder Schreiben an diesem AnschlussThe protocol is not supported on this platform
- Das Protokoll wird auf dieser Plattform nicht unterstützt.
+ Das Protokoll wird auf dieser Plattform nicht unterstützt.An operation was attempted while the socket was in a state that did not permit it
- Vorgang nicht möglich, weil der Anschluss nicht bereit war
+ Vorgang nicht möglich, weil der Anschluss nicht bereit warThe remote host closed the connection
- Der Remote Host hat die Verbindung beendet
+ Der Remote Host hat die Verbindung beendetUnknown error
- Unbekannter Fehler
+ Unbekannter Fehler
@@ -287,19 +287,19 @@ Abbrechen um einen minimalen Scan durchzuführen.
Lon
- Länge
+ LängeLat
- Breite
+ BreiteX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Abbrechen um einen minimalen Scan durchzuführen.
Hours
- Stunden
+ StundenMinutes
- Minuten
+ MinutenSeconds
- Sekunden
+ SekundenOK
- Ok
+ Ok
@@ -616,7 +616,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Last changes discarded
- Letzte Änderungen verworfen
+ Letzte Änderungen verworfenSuccessfully duplicated feature
@@ -744,7 +744,7 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Set feature as navigation
- Objekt als Navigation setzen
+ Objekt als Navigation setzenFeature has no geometry
@@ -816,15 +816,15 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Gehe zu %1 %2 (Karten-KBS)
+ Gehe zu %1 %2 (Karten-KBS)Set navigation point
- Navigationspunkt setzen
+ Navigationspunkt setzenGo to %1° %2° (WGS84)
- Gehe zu %1° %2° (WGS84)
+ Gehe zu %1° %2° (WGS84)Go to coordinate
@@ -913,7 +913,7 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Reload data
- Daten aktualisieren
+ Daten aktualisierenReload of layer %1 triggered
@@ -933,11 +933,11 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Read-Only Layer
- Nur Lesezugriff auf Layer
+ Nur Lesezugriff auf LayerGeometry Locked Layer
- Layer mit gesperrter Geometrie
+ Layer mit gesperrter GeometrieThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1005,7 +1005,7 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Cannot add new feature in layer "%1".
- Kann kein neues Objekt im Layer "%1" anlegen.
+ Kann kein neues Objekt im Layer "%1" anlegen.
@@ -1081,18 +1081,18 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
LocatorItemSearch…
- Suchen…
+ Suchen…LocatorSettingsSearch Settings
- Suchoptionen
+ SuchoptionenTrigger without its prefix
- Ohne Präfix auslösen
+ Ohne Präfix auslösenSearch Bar Settings
@@ -1221,15 +1221,15 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Printing atlas feature(s) to PDF
- Atlas-Feature(s) als PDF drucken
+ Atlas-Feature(s) als PDF druckenAtlas feature(s) successfully printed to PDF and placed in your documents
- Atlas-Feature(s) erfolgreich als PDF gedruckt und in Ihren Dokumenten platziert
+ Atlas-Feature(s) erfolgreich als PDF gedruckt und in Ihren Dokumenten platziertPrint Atlas Feature(s) to Image
- Drucke Atlas-Objekt(e) als Bild
+ Drucke Atlas-Objekt(e) als BildPrint Atlas Feature to Image
@@ -1252,7 +1252,7 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
NavigationInformationViewLat.
- Lat
+ LatX
@@ -1260,11 +1260,11 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Lon.
- Lon
+ Loncentroid
- Zentroid
+ ZentroidLon
@@ -1329,7 +1329,7 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Last changes discarded
- Letzte Änderungen verworfen
+ Letzte Änderungen verworfenConstraints not valid
@@ -1340,15 +1340,15 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
PlatformUtilitiesSelect Media File
- Mediendatei auswählen
+ Mediendatei auswählenJPEG images (*.jpg *.jpeg)
- JPEG-Bilder (*.jpg *.jpeg)
+ JPEG-Bilder (*.jpg *.jpeg)Failed to save gallery picture
- Galleriebild konnte nicht gespeichert werden
+ Galleriebild konnte nicht gespeichert werdenOpen File
@@ -1392,7 +1392,7 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Audio files (*.mp3 *.aac *.ogg)
- Audiodateien (*.mp3 *.aac *.ogg)
+ Audiodateien (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1411,71 +1411,71 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
PositionInformationViewLat.
- Lat
+ LatN/A
- N. a.
+ N. a.X
- X
+ XLon.
- Lon
+ LonLon
- Länge
+ LängeY
- Y
+ YLat
- Breite
+ BreiteAltitude
- Höhe
+ HöheSpeed
- Geschw.
+ Geschw.H. Accuracy
- Horizontale Genauigkeit
+ Horizontale GenauigkeitV. Accuracy
- Vertikale Genauigkeit
+ Vertikale GenauigkeitPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Gültig
+ GültigFix
- Fix
+ FixQuality
- Qualität
+ Qualität
@@ -1505,7 +1505,7 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1676,7 +1676,7 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
QFieldCloudLoginFailed to login
- Anmeldung fehlgeschlagen
+ Anmeldung fehlgeschlagenFailed to sign in
@@ -1718,15 +1718,15 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Logout
- Abmelden
+ AbmeldenLogging in, please wait
- Anmeldung läuft, bitte warten
+ Anmeldung läuft, bitte wartenLogin
- Anmelden
+ AnmeldenThe easiest way to transfer you project from QGIS to your devices!
@@ -1745,7 +1745,7 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Einige Layer sind nicht korrekt in QFieldCloud verpackt worden. Diese Layer könnten falsch konfiguriert sein oder ihre Datenquelle ist vom QFieldCloud-Server nicht zugänglich.
+ Einige Layer sind nicht korrekt in QFieldCloud verpackt worden. Diese Layer könnten falsch konfiguriert sein oder ihre Datenquelle ist vom QFieldCloud-Server nicht zugänglich.QFieldCloud had troubles packaging your project
@@ -1856,7 +1856,7 @@ Die Objekt-Geometrien werden in Objekt '%1' zusammengeführt, welches
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Alle geänderten Objekte in den lokalen Cloud-Ebenen rückgängig machen. Sie können diese Änderungen nicht wiederherstellen.
+ Alle geänderten Objekte in den lokalen Cloud-Ebenen rückgängig machen. Sie können diese Änderungen nicht wiederherstellen.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1902,7 +1902,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- %n Attachment wird im Hintergrund hochgeladen%n Attachments werden im Hintergrund hochgeladen
+ %n Attachment wird im Hintergrund hochgeladen%n Attachments werden im Hintergrund hochgeladenShould local changes be reverted?
@@ -1937,26 +1937,26 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Export fehlgeschlagen
+ Export fehlgeschlagenPackaged layer '%1' is not valid: '%2'
- Der gepackte Layer '%1' ist nicht gültig: '%2'
+ Der gepackte Layer '%1' ist nicht gültig: '%2'Failed to open temporary file for "%1", reason:
%2
- Temporäre Datei für "%1" konnte nicht geöffnet werden, Grund:
+ Temporäre Datei für "%1" konnte nicht geöffnet werden, Grund:
%2Failed to upload attachment stored at "%1", reason:
%2
- Das Hochladen des Anhangs, der unter "%1" gespeichert ist, ist fehlgeschlagen, Grund: %2
+ Das Hochladen des Anhangs, der unter "%1" gespeichert ist, ist fehlgeschlagen, Grund: %2Failed to download file "%1", reason:
- Dateidownload gescheitert "%1", Grund:
+ Dateidownload gescheitert "%1", Grund:Failed to write downloaded file stored at "%1", fs reason:
@@ -2030,7 +2030,7 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to upload attachment stored at `%1`, reason:
%2
- Upload des Anhangs fehlgeschlagen, gespeichert in `%1`, Grund:
+ Upload des Anhangs fehlgeschlagen, gespeichert in `%1`, Grund:
%2
@@ -2316,7 +2316,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Wenn diese Funktion aktiviert ist, wird die Bildschirmhelligkeit nach 20 Sekunden Inaktivität gedimmt, um die Batterie zu schonen.
+ Wenn diese Funktion aktiviert ist, wird die Bildschirmhelligkeit nach 20 Sekunden Inaktivität gedimmt, um die Batterie zu schonen.Consider mouse as a touchscreen device
@@ -2372,36 +2372,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Scan für gepaarte Geräte
+ Scan für gepaarte GeräteScanning failed: %1
- Scan fehlgeschlagen: %1
+ Scan fehlgeschlagen: %1Scanning done
- Scan abgeschlossen
+ Scan abgeschlossen%n device(s) found
- %n Gerät(e) gefunden%n Gerät(e) gefunden
+ %n Gerät(e) gefunden%n Gerät(e) gefundenScanning canceled
- Scan abgebrochen
+ Scan abgebrochenScan
- Scan
+ ScanMake a full service discovery
- Kompletten Servicescan durchführen
+ Kompletten Servicescan durchführenA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Ein vollständiger Servicescan kann länger dauern. Willst du wirklich einen vollständigen Servicescan durchfüren?
+ Ein vollständiger Servicescan kann länger dauern. Willst du wirklich einen vollständigen Servicescan durchfüren?
Abbrechen um einen minimalen Scan durchzuführen.
@@ -2410,7 +2410,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Connect to %1
- Verbinden mit %1
+ Verbinden mit %1Connecting to %1
@@ -2470,7 +2470,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Z-Werte, die vom Positioniergerät aufgezeichnet werden, werden um diesen Wert korrigiert. Wenn ein Wert von 1,6 eingegeben wird, führt dies zu einer Korrektur von -1,6 für jeden aufgezeichneten Wert.
+ Z-Werte, die vom Positioniergerät aufgezeichnet werden, werden um diesen Wert korrigiert. Wenn ein Wert von 1,6 eingegeben wird, führt dies zu einer Korrektur von -1,6 für jeden aufgezeichneten Wert.Skip altitude correction
@@ -2768,7 +2768,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Loading font %1
- Lade Schriftart %1
+ Lade Schriftart %1
@@ -2829,7 +2829,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Rotieren der Karte wird nicht unterstützt. Reset von %1 zu 0.
+ Rotieren der Karte wird nicht unterstützt. Reset von %1 zu 0.
@@ -3052,7 +3052,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Cannot start track with empty values
- Das Tracking kann nicht mit leeren Werten gestartet werden
+ Das Tracking kann nicht mit leeren Werten gestartet werdenWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
@@ -3263,7 +3263,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Willkommen bei QField. Verwenden Sie diese Anwendung zum ersten Mal? Probieren Sie die in der Liste unten aufgeführten Beispielprojekte aus.
+ Willkommen bei QField. Verwenden Sie diese Anwendung zum ersten Mal? Probieren Sie die in der Liste unten aufgeführten Beispielprojekte aus.Welcome back to QField.
@@ -3433,11 +3433,11 @@ Abbrechen um einen minimalen Scan durchzuführen.
Positioning activated
- Positionierung aktiviert
+ Positionierung aktiviertPositioning turned off
- Positionierung deaktiviert
+ Positionierung deaktiviertCanvas stopped following location
@@ -3465,7 +3465,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Printing to PDF
- Drucke als PDF
+ Drucke als PDFGo to Home Screen
@@ -3477,7 +3477,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Open Project
- Projekt öffnen
+ Projekt öffnenSettings
@@ -3493,7 +3493,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Select template below
- Vorlage unten auswählen
+ Vorlage unten auswählenActivating positioning service
@@ -3517,7 +3517,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Add Bookmark at Coordinates
- Lesezeichen bei Koordinaten hinzufügen
+ Lesezeichen bei Koordinaten hinzufügenUntitled bookmark
@@ -3525,7 +3525,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Set Coordinates as Destination
- Setze Koordinaten als Ziel
+ Setze Koordinaten als ZielCopy Coordinates
@@ -3533,11 +3533,11 @@ Abbrechen um einen minimalen Scan durchzuführen.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3549,27 +3549,27 @@ Abbrechen um einen minimalen Scan durchzuführen.
0.25m Precision
- 0,25m Genauigkeit
+ 0,25m Genauigkeit0.5m Precision
- 0,5 m Genauigkeit
+ 0,5 m Genauigkeit1m Precision
- 1m Genauigkeit
+ 1m Genauigkeit2.5m Precision
- 2,5m Genauigkeit
+ 2,5m Genauigkeit5m Precision
- 5m Genauigkeit
+ 5m Genauigkeit10m Precision
- 10m Genauigkeit
+ 10m GenauigkeitAlways Show Precise View
@@ -3597,7 +3597,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Set As Destination
- Als Ziel auswählen
+ Als Ziel auswählenNavigation Options
@@ -3633,11 +3633,11 @@ Abbrechen um einen minimalen Scan durchzuführen.
Center to Current Location
- Auf aktuelle Position zentrieren
+ Auf aktuelle Position zentrierenAdd Bookmark at Current Location
- Lesezeichen an aktueller Position hinzufügen
+ Lesezeichen an aktueller Position hinzufügenCurrent location unknown
@@ -3649,7 +3649,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Copy Current Location
- Kopiere aktuelle Position
+ Kopiere aktuelle PositionAccuracy
@@ -3677,7 +3677,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Logged out
- Ausgeloggt
+ AusgeloggtConnecting...
@@ -3685,7 +3685,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Logged in
- Eingeloggt
+ EingeloggtProject %1 failed to download
@@ -3709,7 +3709,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Positioning error: %1
- Ortungsfehler: %1
+ Ortungsfehler: %1Azimuth
@@ -3721,7 +3721,7 @@ Abbrechen um einen minimalen Scan durchzuführen.
Print to Image
- Als Bild drucken
+ Als Bild druckenPrinting...
diff --git a/i18n/qfield_en.ts b/i18n/qfield_en.ts
index 72b03b268e..c19ac080bc 100644
--- a/i18n/qfield_en.ts
+++ b/i18n/qfield_en.ts
@@ -127,7 +127,7 @@
BluetoothDeviceChooserPositioning device in use:
- Positioning device in use:
+ Positioning device in use:Scanning for paired devices
@@ -154,7 +154,7 @@
Scan
- Scan
+ ScanMake a full service discovery
@@ -168,23 +168,23 @@ Cancel to make a minimal device scan instead.
Connected to %1
- Connected to %1
+ Connected to %1Connect to %1
- Connect to %1
+ Connect to %1Connect to %1
- Connect to %1
+ Connect to %1Connecting to %1
- Connecting to %1
+ Connecting to %1Use orthometric altitude from device
- Use orthometric altitude from device
+ Use orthometric altitude from deviceSelect the Bluetooth device from the list below:
@@ -196,7 +196,7 @@ Cancel to make a minimal device scan instead.
N/A
- N/A
+ N/ABluetooth device address:
@@ -215,7 +215,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- Internal device
+ Internal device
@@ -238,31 +238,31 @@ Cancel to make a minimal device scan instead.
Could not find the remote host
- Could not find the remote host
+ Could not find the remote hostCould not find the service UUID on remote host
- Could not find the service UUID on remote host
+ Could not find the service UUID on remote hostAttempt to read or write from socket returned an error
- Attempt to read or write from socket returned an error
+ Attempt to read or write from socket returned an errorThe protocol is not supported on this platform
- The protocol is not supported on this platform
+ The protocol is not supported on this platformAn operation was attempted while the socket was in a state that did not permit it
- An operation was attempted while the socket was in a state that did not permit it
+ An operation was attempted while the socket was in a state that did not permit itThe remote host closed the connection
- The remote host closed the connection
+ The remote host closed the connectionUnknown error
- Unknown error
+ Unknown error
@@ -292,19 +292,19 @@ Cancel to make a minimal device scan instead.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -431,19 +431,19 @@ Cancel to make a minimal device scan instead.
Hours
- Hours
+ HoursMinutes
- Minutes
+ MinutesSeconds
- Seconds
+ SecondsOK
- OK
+ OK
@@ -621,7 +621,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- Last changes discarded
+ Last changes discardedSuccessfully duplicated feature
@@ -767,7 +767,7 @@ The features geometries will be combined into feature '%1', which will
Set feature as navigation
- Set feature as navigation
+ Set feature as navigationFeature has no geometry
@@ -839,15 +839,15 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Go to %1 %2 (Map CRS)
+ Go to %1 %2 (Map CRS)Set navigation point
- Set navigation point
+ Set navigation pointGo to %1° %2° (WGS84)
- Go to %1° %2° (WGS84)
+ Go to %1° %2° (WGS84)Go to coordinate
@@ -936,7 +936,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- Reload data
+ Reload dataReload of layer %1 triggered
@@ -1085,11 +1085,11 @@ The features geometries will be combined into feature '%1', which will
LocatorSettingsSearch Settings
- Search Settings
+ Search SettingsTrigger without its prefix
- Trigger without its prefix
+ Trigger without its prefixSearch Bar Settings
@@ -1218,11 +1218,11 @@ The features geometries will be combined into feature '%1', which will
Printing atlas feature(s) to PDF
- Printing atlas feature(s) to PDF
+ Printing atlas feature(s) to PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Atlas feature(s) successfully printed to PDF and placed in your documents
+ Atlas feature(s) successfully printed to PDF and placed in your documentsPrint Atlas Feature(s) to Image
@@ -1249,7 +1249,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1257,11 +1257,11 @@ The features geometries will be combined into feature '%1', which will
Lon.
- Lon.
+ Lon.centroid
- centroid
+ centroidLon
@@ -1326,7 +1326,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- Last changes discarded
+ Last changes discardedConstraints not valid
@@ -1337,15 +1337,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- Select Media File
+ Select Media FileJPEG images (*.jpg *.jpeg)
- JPEG images (*.jpg *.jpeg)
+ JPEG images (*.jpg *.jpeg)Failed to save gallery picture
- Failed to save gallery picture
+ Failed to save gallery pictureOpen File
@@ -1389,7 +1389,7 @@ The features geometries will be combined into feature '%1', which will
Audio files (*.mp3 *.aac *.ogg)
- Audio files (*.mp3 *.aac *.ogg)
+ Audio files (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1408,71 +1408,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- N/A
+ N/AX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Altitude
+ AltitudeSpeed
- Speed
+ SpeedH. Accuracy
- H. Accuracy
+ H. AccuracyV. Accuracy
- V. Accuracy
+ V. AccuracyPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Valid
+ ValidFix
- Fix
+ FixQuality
- Quality
+ Quality
@@ -1502,7 +1502,7 @@ The features geometries will be combined into feature '%1', which will
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1673,7 +1673,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- Failed to login
+ Failed to loginFailed to sign in
@@ -1715,15 +1715,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- Logout
+ LogoutLogging in, please wait
- Logging in, please wait
+ Logging in, please waitLogin
- Login
+ LoginThe easiest way to transfer you project from QGIS to your devices!
@@ -1738,11 +1738,11 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Problematic QFieldCloud layer packaging
+ Problematic QFieldCloud layer packagingSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
+ Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.QFieldCloud had troubles packaging your project
@@ -1856,7 +1856,7 @@ The features geometries will be combined into feature '%1', which will
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Revert all modified features in the local cloud layers. You cannot restore those changes.
+ Revert all modified features in the local cloud layers. You cannot restore those changes.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1904,7 +1904,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
-
+ %n attachment(s) are currently being uploaded in the background.%n attachment(s) are currently being uploaded in the background.
@@ -1942,31 +1942,31 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Export failed
+ Export failedPackaged layer '%1' is not valid: '%2'
- Packaged layer '%1' is not valid: '%2'
+ Packaged layer '%1' is not valid: '%2'Failed to open temporary file for "%1", reason:
%2
- Failed to open temporary file for "%1", reason:
+ Failed to open temporary file for "%1", reason:
%2Failed to upload attachment stored at "%1", reason:
%2
- Failed to upload attachment stored at "%1", reason:
+ Failed to upload attachment stored at "%1", reason:
%2Failed to download file "%1", reason:
- Failed to download file "%1", reason:
+ Failed to download file "%1", reason:Failed to write downloaded file stored at "%1", fs reason:
- Failed to write downloaded file stored at "%1", fs reason:
+ Failed to write downloaded file stored at "%1", fs reason:aborted
@@ -2037,7 +2037,7 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to upload attachment stored at `%1`, reason:
%2
- Failed to upload attachment stored at `%1`, reason:
+ Failed to upload attachment stored at `%1`, reason:
%2
@@ -2323,7 +2323,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
+ If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.Consider mouse as a touchscreen device
@@ -2379,39 +2379,39 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Scanning for paired devices
+ Scanning for paired devicesScanning failed: %1
- Scanning failed: %1
+ Scanning failed: %1Scanning done
- Scanning done
+ Scanning done%n device(s) found
-
+ %n device(s) found%n device(s) foundScanning canceled
- Scanning canceled
+ Scanning canceledScan
- Scan
+ ScanMake a full service discovery
- Make a full service discovery
+ Make a full service discoveryA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- A full device scan can take longer. You really want to do it?
+ A full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
@@ -2420,7 +2420,7 @@ Cancel to make a minimal device scan instead.Connect to %1
- Connect to %1
+ Connect to %1Connecting to %1
@@ -2480,7 +2480,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
+ Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.Skip altitude correction
@@ -2758,7 +2758,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- Loading font %1
+ Loading font %1
@@ -2819,7 +2819,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Map Canvas rotation is not supported. Resetting from %1 to 0.
+ Map Canvas rotation is not supported. Resetting from %1 to 0.
@@ -2923,7 +2923,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Preparing QField, this is a one time operation that might take some time
+ Preparing QField, this is a one time operation that might take some time
@@ -2965,7 +2965,7 @@ Cancel to make a minimal device scan instead.
The connection was refused by the remote hose
- The connection was refused by the remote hose
+ The connection was refused by the remote hoseUDP receiver error (%1)
@@ -3030,11 +3030,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- Record when both active constraints are met
+ Record when both active constraints are metWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- When enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
+ When enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.Start tracking
@@ -3042,11 +3042,11 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- Cannot start track with empty values
+ Cannot start track with empty valuesWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- When both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
+ When both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.Measure (M) value attached to vertices:
@@ -3152,7 +3152,7 @@ Cancel to make a minimal device scan instead.
The connection was refused by the remote hose
- The connection was refused by the remote hose
+ The connection was refused by the remote hoseUDP receiver error (%1)
@@ -3241,11 +3241,11 @@ Cancel to make a minimal device scan instead.
Base map project
- Base map project
+ Base map projectBase Map Project
- Base Map Project
+ Base Map ProjectRemove from Recent Projects
@@ -3419,11 +3419,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- Positioning activated
+ Positioning activatedPositioning turned off
- Positioning turned off
+ Positioning turned offCanvas stopped following location
@@ -3451,7 +3451,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- Printing to PDF
+ Printing to PDFGo to Home Screen
@@ -3463,7 +3463,7 @@ Cancel to make a minimal device scan instead.
Open Project
- Open Project
+ Open ProjectSettings
@@ -3479,7 +3479,7 @@ Cancel to make a minimal device scan instead.
Select template below
- Select template below
+ Select template belowActivating positioning service
@@ -3503,7 +3503,7 @@ Cancel to make a minimal device scan instead.
Add Bookmark at Coordinates
- Add Bookmark at Coordinates
+ Add Bookmark at CoordinatesUntitled bookmark
@@ -3511,7 +3511,7 @@ Cancel to make a minimal device scan instead.
Set Coordinates as Destination
- Set Coordinates as Destination
+ Set Coordinates as DestinationCopy Coordinates
@@ -3519,11 +3519,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3535,27 +3535,27 @@ Cancel to make a minimal device scan instead.
0.25m Precision
- 0.25m Precision
+ 0.25m Precision0.5m Precision
- 0.5m Precision
+ 0.5m Precision1m Precision
- 1m Precision
+ 1m Precision2.5m Precision
- 2.5m Precision
+ 2.5m Precision5m Precision
- 5m Precision
+ 5m Precision10m Precision
- 10m Precision
+ 10m PrecisionAlways Show Precise View
@@ -3583,7 +3583,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- Set As Destination
+ Set As DestinationNavigation Options
@@ -3619,11 +3619,11 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- Center to Current Location
+ Center to Current LocationAdd Bookmark at Current Location
- Add Bookmark at Current Location
+ Add Bookmark at Current LocationCurrent location unknown
@@ -3635,7 +3635,7 @@ Cancel to make a minimal device scan instead.
Copy Current Location
- Copy Current Location
+ Copy Current LocationAccuracy
@@ -3663,7 +3663,7 @@ Cancel to make a minimal device scan instead.
Logged out
- Logged out
+ Logged outConnecting...
@@ -3671,7 +3671,7 @@ Cancel to make a minimal device scan instead.
Logged in
- Logged in
+ Logged inProject %1 failed to download
@@ -3695,7 +3695,7 @@ Cancel to make a minimal device scan instead.
Positioning error: %1
- Positioning error: %1
+ Positioning error: %1Azimuth
diff --git a/i18n/qfield_es.ts b/i18n/qfield_es.ts
index deb71841b4..f80b975f13 100644
--- a/i18n/qfield_es.ts
+++ b/i18n/qfield_es.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Dispositivo de ubicación en uso:
+ Dispositivo de ubicación en uso:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Escanear
+ EscanearMake a full service discovery
@@ -163,23 +163,23 @@ Cancele para hacer una búsqueda mínima de dispositivos en su lugar.
Connected to %1
- Conectado a %1
+ Conectado a %1Connect to %1
- Conectar con %1
+ Conectar con %1Connect to %1
- Conectar a %1
+ Conectar a %1Connecting to %1
- Conectando a %1
+ Conectando a %1Use orthometric altitude from device
- Usar altitud ortométrica del dispositivo
+ Usar altitud ortométrica del dispositivoSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancele para hacer una búsqueda mínima de dispositivos en su lugar.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Cancele para hacer una búsqueda mínima de dispositivos en su lugar.BluetoothDeviceModel
Internal device
- Dispositivo interno
+ Dispositivo interno
@@ -233,31 +233,31 @@ Cancele para hacer una búsqueda mínima de dispositivos en su lugar.
Could not find the remote host
- No se pudo encontrar el host remoto
+ No se pudo encontrar el host remotoCould not find the service UUID on remote host
- No se pudo encontrar el UUID del servicio en el host remoto
+ No se pudo encontrar el UUID del servicio en el host remotoAttempt to read or write from socket returned an error
- El intento de leer o escribir desde el socket devolvió un error
+ El intento de leer o escribir desde el socket devolvió un errorThe protocol is not supported on this platform
- El protocolo no es compatible con esta plataforma.
+ El protocolo no es compatible con esta plataforma.An operation was attempted while the socket was in a state that did not permit it
- Se intentó una operación mientras el socket estaba en un estado que no lo permitía
+ Se intentó una operación mientras el socket estaba en un estado que no lo permitíaThe remote host closed the connection
- El host remoto cerró la conexión.
+ El host remoto cerró la conexión.Unknown error
- Error desconocido
+ Error desconocido
@@ -287,19 +287,19 @@ Cancele para hacer una búsqueda mínima de dispositivos en su lugar.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancele para hacer una búsqueda mínima de dispositivos en su lugar.
Hours
- Horas
+ HorasMinutes
- Minutos
+ MinutosSeconds
- Segundos
+ SegundosOK
- OK
+ OK
@@ -616,7 +616,7 @@ Cancele para hacer una búsqueda mínima de dispositivos en su lugar.
Last changes discarded
- Últimos cambios descartados
+ Últimos cambios descartadosSuccessfully duplicated feature
@@ -746,7 +746,7 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
Set feature as navigation
- Establecer objeto como navegación
+ Establecer objeto como navegaciónFeature has no geometry
@@ -818,15 +818,15 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Ir a %1 %2 (SRC del mapa)
+ Ir a %1 %2 (SRC del mapa)Set navigation point
- Establecer punto de navegación
+ Establecer punto de navegaciónGo to %1° %2° (WGS84)
- Ir a %1º %2º (WGS84)
+ Ir a %1º %2º (WGS84)Go to coordinate
@@ -915,7 +915,7 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
Reload data
- Recargar datos
+ Recargar datosReload of layer %1 triggered
@@ -935,11 +935,11 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
Read-Only Layer
- Capa de solo lectura
+ Capa de solo lecturaGeometry Locked Layer
- Capa de geometría bloqueada
+ Capa de geometría bloqueadaThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1008,7 +1008,7 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
Cannot add new feature in layer "%1".
- No se puede añadir objeto nuevo a la capa "%1".
+ No se puede añadir objeto nuevo a la capa "%1".
@@ -1084,18 +1084,18 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
LocatorItemSearch…
- Buscar…
+ Buscar…LocatorSettingsSearch Settings
- Configuración de búsqueda
+ Configuración de búsquedaTrigger without its prefix
- Desencadenar sin su prefijo
+ Desencadenar sin su prefijoSearch Bar Settings
@@ -1224,15 +1224,15 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
Printing atlas feature(s) to PDF
- Imprimiendo objeto(s) de atlas a PDF
+ Imprimiendo objeto(s) de atlas a PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Objeto(s) de atlas impreso correctamente a PDF y colocado(s) en sus documentos
+ Objeto(s) de atlas impreso correctamente a PDF y colocado(s) en sus documentosPrint Atlas Feature(s) to Image
- Imprimir entidad(es) del atlas a imagen
+ Imprimir entidad(es) del atlas a imagenPrint Atlas Feature to Image
@@ -1255,7 +1255,7 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1263,11 +1263,11 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
Lon.
- Lon.
+ Lon.centroid
- centroide
+ centroideLon
@@ -1332,7 +1332,7 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
Last changes discarded
- Últimos cambios descartados
+ Últimos cambios descartadosConstraints not valid
@@ -1343,15 +1343,15 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
PlatformUtilitiesSelect Media File
- Seleccionar archivo de medios
+ Seleccionar archivo de mediosJPEG images (*.jpg *.jpeg)
- Imágenes JPEG (*.jpg *.jpeg)
+ Imágenes JPEG (*.jpg *.jpeg)Failed to save gallery picture
- No se pudo guardar la imagen de la galería
+ No se pudo guardar la imagen de la galeríaOpen File
@@ -1395,7 +1395,7 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
Audio files (*.mp3 *.aac *.ogg)
- Todos los formatos de audio (*.mp3 *.aac *.ogg)
+ Todos los formatos de audio (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1414,71 +1414,71 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- N/A
+ N/AX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Altitud
+ AltitudSpeed
- Velocidad
+ VelocidadH. Accuracy
- Precisión horizontal
+ Precisión horizontalV. Accuracy
- Precisión vertical
+ Precisión verticalPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Válido
+ VálidoFix
- Fijo
+ FijoQuality
- Calidad
+ Calidad
@@ -1508,7 +1508,7 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1679,7 +1679,7 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
QFieldCloudLoginFailed to login
- No se pudo iniciar la sesión
+ No se pudo iniciar la sesiónFailed to sign in
@@ -1721,15 +1721,15 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
Logout
- Cerrar sesión
+ Cerrar sesiónLogging in, please wait
- Iniciando sesión, por favor espere
+ Iniciando sesión, por favor espereLogin
- Iniciar sesión
+ Iniciar sesiónThe easiest way to transfer you project from QGIS to your devices!
@@ -1744,11 +1744,11 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Empaquetado de capas en QFieldCloud problemático
+ Empaquetado de capas en QFieldCloud problemáticoSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Algunas capas no se han empaquetado correctamente en QFieldCloud. Estas capas pueden estar mal configurada o su fuente de datos no es accesible desde el servidor de QFieldCloud.
+ Algunas capas no se han empaquetado correctamente en QFieldCloud. Estas capas pueden estar mal configurada o su fuente de datos no es accesible desde el servidor de QFieldCloud.QFieldCloud had troubles packaging your project
@@ -1859,7 +1859,7 @@ Las geometrías de los objetos se combinarán en el objeto '%1', que c
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Revertir todos los objetos modificados en las capas de la nube locales. No se pueden restablecer estos cambios.
+ Revertir todos los objetos modificados en las capas de la nube locales. No se pueden restablecer estos cambios.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1905,7 +1905,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- Actualmente se está subiendo un adjunto en segundo plano.Actualmente se están subiendo %n adjuntos en segundo plano.Actualmente se están subiendo %n adjuntos en segundo plano.
+ Actualmente se está subiendo un adjunto en segundo plano.Actualmente se están subiendo %n adjuntos en segundo plano.Actualmente se están subiendo %n adjuntos en segundo plano.Should local changes be reverted?
@@ -1940,31 +1940,31 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Falló la exportación
+ Falló la exportaciónPackaged layer '%1' is not valid: '%2'
- La capa empaquetada '%1' no es válida: '%2'
+ La capa empaquetada '%1' no es válida: '%2'Failed to open temporary file for "%1", reason:
%2
- No se pudo abrir el archivo temporal para "%1", motivo:
+ No se pudo abrir el archivo temporal para "%1", motivo:
%2Failed to upload attachment stored at "%1", reason:
%2
- No se pudo subir el adjunto guardado en "%1", motivo:
+ No se pudo subir el adjunto guardado en "%1", motivo:
%2Failed to download file "%1", reason:
- No se pudo descargar el archivo "%1", motivo:
+ No se pudo descargar el archivo "%1", motivo:Failed to write downloaded file stored at "%1", fs reason:
- No se pudo escribir el archivo descargado guardado en "%1", motivo:
+ No se pudo escribir el archivo descargado guardado en "%1", motivo:aborted
@@ -2035,7 +2035,7 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to upload attachment stored at `%1`, reason:
%2
- No se pudo cargar el archivo adjunto almacenado en `%1`, motivo:
+ No se pudo cargar el archivo adjunto almacenado en `%1`, motivo:
%2
@@ -2321,7 +2321,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Si se habilita, el brillo de la pantalla se atenuará después de 20 segundos de inactividad para ahorrar batería.
+ Si se habilita, el brillo de la pantalla se atenuará después de 20 segundos de inactividad para ahorrar batería.Consider mouse as a touchscreen device
@@ -2377,36 +2377,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Buscando dispositivos emparejados
+ Buscando dispositivos emparejadosScanning failed: %1
- Falló la búsqueda: %1
+ Falló la búsqueda: %1Scanning done
- Búsqueda completada
+ Búsqueda completada%n device(s) found
- Un dispositivo encontrado%n dispositivos encontrados%n dispositivos encontrados
+ Un dispositivo encontrado%n dispositivos encontrados%n dispositivos encontradosScanning canceled
- Búsqueda cancelada
+ Búsqueda canceladaScan
- Buscar
+ BuscarMake a full service discovery
- Hacer un descubrimiento de servicio completo
+ Hacer un descubrimiento de servicio completoA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Una búsqueda completa de dispositivos puede llevar más tiempo. ¿Realmente quiere hacerla?
+ Una búsqueda completa de dispositivos puede llevar más tiempo. ¿Realmente quiere hacerla?
Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
@@ -2415,7 +2415,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Connect to %1
- Conectar a %1
+ Conectar a %1Connecting to %1
@@ -2475,7 +2475,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Los valores Z tomados por un dispositivo de posicionamiento se corregirán con este valor. Si se introduce un valor de 1,6 el resultado será una corrección de -1,6 para cada valor registrado.
+ Los valores Z tomados por un dispositivo de posicionamiento se corregirán con este valor. Si se introduce un valor de 1,6 el resultado será una corrección de -1,6 para cada valor registrado. Skip altitude correction
@@ -2773,7 +2773,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Loading font %1
- Cargando tipo de letra %1
+ Cargando tipo de letra %1
@@ -2834,7 +2834,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.QgsQuickMapSettings
Map Canvas rotation is not supported. Resetting from %1 to 0.
- La rotación del lienzo del mapa no está soportada. Se restablece de %1 a 0.
+ La rotación del lienzo del mapa no está soportada. Se restablece de %1 a 0.
@@ -2938,7 +2938,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.SystemLoader
Preparing QField, this is a one time operation that might take some time
- Preparando QField,. Esta es una operación de una única vez que puede llevar algo de tiempo.
+ Preparando QField,. Esta es una operación de una única vez que puede llevar algo de tiempo.
@@ -2980,7 +2980,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
The connection was refused by the remote hose
- La conexión fue rechazada por el host remoto
+ La conexión fue rechazada por el host remotoUDP receiver error (%1)
@@ -3045,11 +3045,11 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Record when both active constraints are met
- Registrar cuando se cumplan las dos restricciones activas
+ Registrar cuando se cumplan las dos restricciones activasWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Cuando está activo, solo se registrarán los vértices cuando se cumplan las dos restricciones activas. Si se desactiva, el cumplimiento de una sola de las restricciones desencadenará la adición del vértice.
+ Cuando está activo, solo se registrarán los vértices cuando se cumplan las dos restricciones activas. Si se desactiva, el cumplimiento de una sola de las restricciones desencadenará la adición del vértice.Start tracking
@@ -3057,11 +3057,11 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Cannot start track with empty values
- No se puede iniciar el seguimiento con valores vacíos
+ No se puede iniciar el seguimiento con valores vacíosWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- Cuando ambas restricciones están desactivadas, las adiciones de vértices se producirán con la frecuencia que proporcione el dispositivo de posicionamiento.
+ Cuando ambas restricciones están desactivadas, las adiciones de vértices se producirán con la frecuencia que proporcione el dispositivo de posicionamiento.Measure (M) value attached to vertices:
@@ -3167,7 +3167,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
The connection was refused by the remote hose
- La conexión fue rechazada por el host remoto
+ La conexión fue rechazada por el host remotoUDP receiver error (%1)
@@ -3256,11 +3256,11 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Base map project
- Proyecto de mapa base
+ Proyecto de mapa baseBase Map Project
- Proyecto de mapa base
+ Proyecto de mapa baseRemove from Recent Projects
@@ -3268,7 +3268,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Bienvenido a QField. ¿Primera vez que usa la aplicación? Pruebe los proyectos de muestra listados debajo.
+ Bienvenido a QField. ¿Primera vez que usa la aplicación? Pruebe los proyectos de muestra listados debajo.Welcome back to QField.
@@ -3438,11 +3438,11 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Positioning activated
- Posicionamiento activado
+ Posicionamiento activadoPositioning turned off
- Posicionamiento apagado
+ Posicionamiento apagadoCanvas stopped following location
@@ -3470,7 +3470,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Printing to PDF
- Imprimiendo a PDF
+ Imprimiendo a PDFGo to Home Screen
@@ -3482,7 +3482,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Open Project
- Abrir proyecto
+ Abrir proyectoSettings
@@ -3498,7 +3498,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Select template below
- Seleccionar plantilla abajo
+ Seleccionar plantilla abajoActivating positioning service
@@ -3522,7 +3522,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Add Bookmark at Coordinates
- Añadir marcador en coordenadas
+ Añadir marcador en coordenadasUntitled bookmark
@@ -3530,7 +3530,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Set Coordinates as Destination
- Establecer coordenadas como destino
+ Establecer coordenadas como destinoCopy Coordinates
@@ -3538,11 +3538,11 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3554,27 +3554,27 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
0.25m Precision
- 0.25 m de precisión
+ 0.25 m de precisión0.5m Precision
- 0.5 m de precisión
+ 0.5 m de precisión1m Precision
- 1 m de precisión
+ 1 m de precisión2.5m Precision
- 2.5 m de precisión
+ 2.5 m de precisión5m Precision
- 5 m de precisión
+ 5 m de precisión10m Precision
- 10 m de precisión
+ 10 m de precisiónAlways Show Precise View
@@ -3602,7 +3602,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Set As Destination
- Establecer como destino
+ Establecer como destinoNavigation Options
@@ -3638,11 +3638,11 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Center to Current Location
- Centrar en la posición actual
+ Centrar en la posición actualAdd Bookmark at Current Location
- Añadir marcador en la posición actual
+ Añadir marcador en la posición actualCurrent location unknown
@@ -3654,7 +3654,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Copy Current Location
- Copiar ubicación actual
+ Copiar ubicación actualAccuracy
@@ -3682,7 +3682,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Logged out
- Desconectado
+ DesconectadoConnecting...
@@ -3690,7 +3690,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Logged in
- Conectado
+ ConectadoProject %1 failed to download
@@ -3714,7 +3714,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Positioning error: %1
- Error de posicionamiento: %1
+ Error de posicionamiento: %1Azimuth
@@ -3726,7 +3726,7 @@ Cancelar para hacer una búsqueda mínima de dispositivos en su lugar.
Print to Image
- Imprimir a imagen
+ Imprimir a imagenPrinting...
diff --git a/i18n/qfield_fi.ts b/i18n/qfield_fi.ts
index ef38e9a963..2ad13a6fb2 100644
--- a/i18n/qfield_fi.ts
+++ b/i18n/qfield_fi.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Käytettävä paikannuslaite:
+ Käytettävä paikannuslaite:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Skannaa
+ SkannaaMake a full service discovery
@@ -163,23 +163,23 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Connected to %1
- Yhdistetty laitteeseen %1
+ Yhdistetty laitteeseen %1Connect to %1
- Yhdistä %1
+ Yhdistä %1Connect to %1
- Yhdistä laitteeseen %1
+ Yhdistä laitteeseen %1Connecting to %1
- Yhdistetään laitteeseen %1
+ Yhdistetään laitteeseen %1Use orthometric altitude from device
- Käytä laitteen ortometristä korkeutta
+ Käytä laitteen ortometristä korkeuttaSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
BluetoothDeviceModelInternal device
- Sisäinen laite
+ Sisäinen laite
@@ -233,31 +233,31 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Could not find the remote host
- Isäntälaitetta ei löytynyt
+ Isäntälaitetta ei löytynytCould not find the service UUID on remote host
- Palvelun UUID ei löytynyt isäntälaitteesta
+ Palvelun UUID ei löytynyt isäntälaitteestaAttempt to read or write from socket returned an error
- Yritys lukea tai kirjoittaa socketista palautti virheen
+ Yritys lukea tai kirjoittaa socketista palautti virheenThe protocol is not supported on this platform
- Protokollaa ei tueta tällä alustalla
+ Protokollaa ei tueta tällä alustallaAn operation was attempted while the socket was in a state that did not permit it
- Leikkausta yritettiin, kun socketti oli tilassa, joka ei sallinut sitä
+ Leikkausta yritettiin, kun socketti oli tilassa, joka ei sallinut sitäThe remote host closed the connection
- Isäntälaite sulki yhteyden
+ Isäntälaite sulki yhteydenUnknown error
- Tuntematon virhe
+ Tuntematon virhe
@@ -287,19 +287,19 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Hours
- Tunnit
+ TunnitMinutes
- Minuutit
+ MinuutitSeconds
- Sekuntit
+ SekuntitOK
- OK
+ OK
@@ -616,7 +616,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Last changes discarded
- Viimeisimmät muutokset hylätty
+ Viimeisimmät muutokset hylättySuccessfully duplicated feature
@@ -744,7 +744,7 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
Set feature as navigation
- Aseta ominaisuus navigoinniksi
+ Aseta ominaisuus navigoinniksiFeature has no geometry
@@ -816,15 +816,15 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Mene %1 %2 (kartan koordinaattijärjestelmä)
+ Mene %1 %2 (kartan koordinaattijärjestelmä)Set navigation point
- Aseta navigointipisteeksi
+ Aseta navigointipisteeksiGo to %1° %2° (WGS84)
- Mene %1° %2° (WGS84)
+ Mene %1° %2° (WGS84)Go to coordinate
@@ -913,7 +913,7 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
Reload data
- Lataa data uudelleen
+ Lataa data uudelleenReload of layer %1 triggered
@@ -933,11 +933,11 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
Read-Only Layer
- Vain-luku-taso
+ Vain-luku-tasoGeometry Locked Layer
- Lukittu-geometria-taso
+ Lukittu-geometria-tasoThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1006,7 +1006,7 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
Cannot add new feature in layer "%1".
- Ei voida lisätä uutta ominaisuutta tasolla "%1".
+ Ei voida lisätä uutta ominaisuutta tasolla "%1".
@@ -1082,18 +1082,18 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
LocatorItemSearch…
- Etsi...
+ Etsi...LocatorSettingsSearch Settings
- Hakuasetukset
+ HakuasetuksetTrigger without its prefix
- Käynnistä ilman etuliitettä
+ Käynnistä ilman etuliitettäSearch Bar Settings
@@ -1222,15 +1222,15 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
Printing atlas feature(s) to PDF
- Tulostetaan Atlaksen kohde(kohteet) PDF:ksi
+ Tulostetaan Atlaksen kohde(kohteet) PDF:ksiAtlas feature(s) successfully printed to PDF and placed in your documents
- Atlaksen kohde(kohteet) tulostettu PDF:ksi onnistuneesti ja sijoitettu dokumentteihisi
+ Atlaksen kohde(kohteet) tulostettu PDF:ksi onnistuneesti ja sijoitettu dokumentteihisiPrint Atlas Feature(s) to Image
- Tulosta Atlas kohde(kohteet) kuvaksi
+ Tulosta Atlas kohde(kohteet) kuvaksiPrint Atlas Feature to Image
@@ -1253,7 +1253,7 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
NavigationInformationViewLat.
- Lev.
+ Lev.X
@@ -1261,11 +1261,11 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
Lon.
- Pit.
+ Pit.centroid
- keskiö
+ keskiöLon
@@ -1330,7 +1330,7 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
Last changes discarded
- Viimeisimmät muutokset hylätty
+ Viimeisimmät muutokset hylättyConstraints not valid
@@ -1341,15 +1341,15 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
PlatformUtilitiesSelect Media File
- Valitse mediatiedosto
+ Valitse mediatiedostoJPEG images (*.jpg *.jpeg)
- JPEG-kuvat (*.jpg *.jpeg)
+ JPEG-kuvat (*.jpg *.jpeg)Failed to save gallery picture
- Galleriakuvan tallennus epäonnistui
+ Galleriakuvan tallennus epäonnistuiOpen File
@@ -1393,7 +1393,7 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
Audio files (*.mp3 *.aac *.ogg)
- Äänitiedostot (*.mp3 *.aac *.ogg)
+ Äänitiedostot (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1412,71 +1412,71 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
PositionInformationViewLat.
- Lev.
+ Lev.N/A
- N/A
+ N/AX
- X
+ XLon.
- Pit.
+ Pit.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Korkeus
+ KorkeusSpeed
- Nopeus
+ NopeusH. Accuracy
- H. Tarkkuus
+ H. TarkkuusV. Accuracy
- V. Tarkkuus
+ V. TarkkuusPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Kelvollinen
+ KelvollinenFix
- Korjaa
+ KorjaaQuality
- Laatu
+ Laatu
@@ -1506,7 +1506,7 @@ Kohteen geometriat yhdistetään kohteeseen '%1', johon sisällytetä
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1677,7 +1677,7 @@ syy: %2
QFieldCloudLoginFailed to login
- Sisäänkirjautuminen epäonnistui
+ Sisäänkirjautuminen epäonnistuiFailed to sign in
@@ -1719,15 +1719,15 @@ syy: %2
Logout
- Kirjaudu ulos
+ Kirjaudu ulosLogging in, please wait
- Kirjaudutaan sisään, ole hyvä ja odota
+ Kirjaudutaan sisään, ole hyvä ja odotaLogin
- Kirjaudu sisään
+ Kirjaudu sisäänThe easiest way to transfer you project from QGIS to your devices!
@@ -1742,11 +1742,11 @@ syy: %2
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Ongelmallinen QFieldCloud tason pakkaus
+ Ongelmallinen QFieldCloud tason pakkausSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Joitakin tasoja ei ole pakattu oikein QFieldCloudiin. Nämä tasot voivat olla määritetty väärin tai niiden tietolähde ei ole käytettävissä QFieldCloud-palvelimelta.
+ Joitakin tasoja ei ole pakattu oikein QFieldCloudiin. Nämä tasot voivat olla määritetty väärin tai niiden tietolähde ei ole käytettävissä QFieldCloud-palvelimelta.QFieldCloud had troubles packaging your project
@@ -1858,7 +1858,7 @@ Tämä voi viedä jonkin aikaa, ole hyvä ja odota...
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Palauta kaikki muokatut kohteet lokaaleilla pilvitasoilla. Et voi palauttaa näitä muutoksia.
+ Palauta kaikki muokatut kohteet lokaaleilla pilvitasoilla. Et voi palauttaa näitä muutoksia.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1906,7 +1906,7 @@ Vaikka voit edelleen tarkastella ja käyttää projektia, sen alustamista suosit
%n attachment(s) are currently being uploaded in the background.
- %n liite(ttä) ladataan taustalla parhaillaan %n liite(ttä) ladataan taustalla parhaillaan
+ %n liite(ttä) ladataan taustalla parhaillaan %n liite(ttä) ladataan taustalla parhaillaan Should local changes be reverted?
@@ -1941,31 +1941,31 @@ Vaikka voit edelleen tarkastella ja käyttää projektia, sen alustamista suosit
QFieldCloudProjectsModelExport failed
- Vienti epäonnistui
+ Vienti epäonnistuiPackaged layer '%1' is not valid: '%2'
- Pakattu kerros '% 1' ei kelpaa: '% 2'
+ Pakattu kerros '% 1' ei kelpaa: '% 2'Failed to open temporary file for "%1", reason:
%2
- Väliaikaisen tiedoston "%1" avaaminen epäonnistui, syy:
+ Väliaikaisen tiedoston "%1" avaaminen epäonnistui, syy:
%2Failed to upload attachment stored at "%1", reason:
%2
- "%1" tallennetun liitteen lataaminen epäonnistui, syy:
+ "%1" tallennetun liitteen lataaminen epäonnistui, syy:
%2Failed to download file "%1", reason:
- Tiedoston lataus epäonnistui "%1", syy:
+ Tiedoston lataus epäonnistui "%1", syy:Failed to write downloaded file stored at "%1", fs reason:
- Ladatun tiedoston kirjoittaminen kohdassa "%1" epäonnistui, fs syy:
+ Ladatun tiedoston kirjoittaminen kohdassa "%1" epäonnistui, fs syy:aborted
@@ -2036,7 +2036,7 @@ epäonnistui, syy: %2
Failed to upload attachment stored at `%1`, reason:
%2
- Osoitteeseen `%1` tallennetun liitteen lataaminen epäonnistui,
+ Osoitteeseen `%1` tallennetun liitteen lataaminen epäonnistui,
syy: %2
@@ -2323,7 +2323,7 @@ Tämä voi viedä jonkin aikaa, ole hyvä ja odota...
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Jos sallittuna, näytön kirkkaus himmennetään 20 sekunnin käyttämättömyyden jälkeen akun säästämiseksi.
+ Jos sallittuna, näytön kirkkaus himmennetään 20 sekunnin käyttämättömyyden jälkeen akun säästämiseksi.Consider mouse as a touchscreen device
@@ -2379,36 +2379,36 @@ Tämä voi viedä jonkin aikaa, ole hyvä ja odota...
Scanning for paired devices
- Skannataan paritettuja laitteita
+ Skannataan paritettuja laitteitaScanning failed: %1
- Skannaus epäonnistui: %1
+ Skannaus epäonnistui: %1Scanning done
- Skannaus suoritettu
+ Skannaus suoritettu%n device(s) found
- %n laite löydetty%n laitetta löydetty
+ %n laite löydetty%n laitetta löydettyScanning canceled
- Skannaus peruutettu
+ Skannaus peruutettuScan
- Skannaa
+ SkannaaMake a full service discovery
- Tee täydellinen palveluhaku
+ Tee täydellinen palveluhakuA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Täydellinen laiteskannaus voi viedä enemmän aikaa. Haluatko jatkaa?
+ Täydellinen laiteskannaus voi viedä enemmän aikaa. Haluatko jatkaa?
Peruuta tehdäksesi suppeampi laiteskannaus.
@@ -2417,7 +2417,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Connect to %1
- Yhdistä laitteeseen %1
+ Yhdistä laitteeseen %1Connecting to %1
@@ -2477,7 +2477,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Paikannuslaitteella tallennetut Z-arvot korjataan tällä arvolla. Jos annetaan arvo 1.6, sitä korjataan -1.6 jokaisen tallennetun arvon kohdalla.
+ Paikannuslaitteella tallennetut Z-arvot korjataan tällä arvolla. Jos annetaan arvo 1.6, sitä korjataan -1.6 jokaisen tallennetun arvon kohdalla.Skip altitude correction
@@ -2775,7 +2775,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Loading font %1
- Ladataan kirjasinta %1
+ Ladataan kirjasinta %1
@@ -2836,7 +2836,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Karttapohjan kiertoa ei tueta. Palautetaan arvosta %1 arvoon 0.
+ Karttapohjan kiertoa ei tueta. Palautetaan arvosta %1 arvoon 0.
@@ -2940,7 +2940,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Valmistellaan QFieldiä, tämä on kertaluontoinen operaatio, joka voi viedä hieman aikaa
+ Valmistellaan QFieldiä, tämä on kertaluontoinen operaatio, joka voi viedä hieman aikaa
@@ -2982,7 +2982,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
The connection was refused by the remote hose
- Etäpalvelin kieltäytyi yhteydestä
+ Etäpalvelin kieltäytyi yhteydestäUDP receiver error (%1)
@@ -3047,11 +3047,11 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Record when both active constraints are met
- Tallenna jos molemmat aktiiviset rajoitteet toteutuvat
+ Tallenna jos molemmat aktiiviset rajoitteet toteutuvatWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Kun sallittu, taitepisteet tallennetaan ainoastaan kun molemmat aktiiviset rajoitusehdot täyttyvät. Jos asetusta ei ole sallittu, yksittäisen rajoitusehdon täyttyminen aiheuttaa taitepisteen lisäyksen.
+ Kun sallittu, taitepisteet tallennetaan ainoastaan kun molemmat aktiiviset rajoitusehdot täyttyvät. Jos asetusta ei ole sallittu, yksittäisen rajoitusehdon täyttyminen aiheuttaa taitepisteen lisäyksen.Start tracking
@@ -3059,11 +3059,11 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Cannot start track with empty values
- Ei voida aloittaa jäljitystä tyhjillä arvoilla
+ Ei voida aloittaa jäljitystä tyhjillä arvoillaWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- Kun molemmat rajoitukset on poistettu käytöstä, taitepisteiden lisäyksiä tapahtuu yhtä usein kuin paikannuslaite toimittaa sijainteja.
+ Kun molemmat rajoitukset on poistettu käytöstä, taitepisteiden lisäyksiä tapahtuu yhtä usein kuin paikannuslaite toimittaa sijainteja.Measure (M) value attached to vertices:
@@ -3169,7 +3169,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
The connection was refused by the remote hose
- Etäpalvelin kieltäytyi yhteydestä
+ Etäpalvelin kieltäytyi yhteydestäUDP receiver error (%1)
@@ -3258,11 +3258,11 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Base map project
- Taustakarttaprojekti
+ TaustakarttaprojektiBase Map Project
- Taustakarttaprojekti
+ TaustakarttaprojektiRemove from Recent Projects
@@ -3270,7 +3270,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Tervetuloa QFieldiin. Ensimmäinen kerta, kun käytät tätä sovellusta? Kokeile alla olevassa luettelossa lueteltuja esimerkkiprojekteja.
+ Tervetuloa QFieldiin. Ensimmäinen kerta, kun käytät tätä sovellusta? Kokeile alla olevassa luettelossa lueteltuja esimerkkiprojekteja.Welcome back to QField.
@@ -3440,11 +3440,11 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Positioning activated
- Paikannus päällä
+ Paikannus päälläPositioning turned off
- Paikannus pois päältä
+ Paikannus pois päältäCanvas stopped following location
@@ -3472,7 +3472,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Printing to PDF
- Tulostetaan PDF:ksi
+ Tulostetaan PDF:ksiGo to Home Screen
@@ -3484,7 +3484,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Open Project
- Avaa projekti
+ Avaa projektiSettings
@@ -3500,7 +3500,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Select template below
- Valitse malli alta
+ Valitse malli altaActivating positioning service
@@ -3524,7 +3524,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Add Bookmark at Coordinates
- Lisää kirjanmerkki koordinaatteihin
+ Lisää kirjanmerkki koordinaatteihinUntitled bookmark
@@ -3532,7 +3532,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Set Coordinates as Destination
- Aseta koordinaatit kohteelle
+ Aseta koordinaatit kohteelleCopy Coordinates
@@ -3540,11 +3540,11 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3556,27 +3556,27 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
0.25m Precision
- 0.25m tarkkuus
+ 0.25m tarkkuus0.5m Precision
- 0.5m tarkkuus
+ 0.5m tarkkuus1m Precision
- 1m tarkkuus
+ 1m tarkkuus2.5m Precision
- 2.5m tarkkuus
+ 2.5m tarkkuus5m Precision
- 5m tarkkuus
+ 5m tarkkuus10m Precision
- 10m tarkkuus
+ 10m tarkkuusAlways Show Precise View
@@ -3604,7 +3604,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Set As Destination
- Aseta kohteeksi
+ Aseta kohteeksiNavigation Options
@@ -3640,11 +3640,11 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Center to Current Location
- Keskitä nykyiseen sijaintiin
+ Keskitä nykyiseen sijaintiinAdd Bookmark at Current Location
- Lisää kirjanmerkki nykyiseen sijaintiin
+ Lisää kirjanmerkki nykyiseen sijaintiinCurrent location unknown
@@ -3656,7 +3656,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Copy Current Location
- Kopioi nykyinen sijainti
+ Kopioi nykyinen sijaintiAccuracy
@@ -3684,7 +3684,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Logged out
- Olet kirjautunut ulos
+ Olet kirjautunut ulosConnecting...
@@ -3692,7 +3692,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Logged in
- Olet kirjautunut sisään
+ Olet kirjautunut sisäänProject %1 failed to download
@@ -3716,7 +3716,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Positioning error: %1
- Paikannusvirhe: %1
+ Paikannusvirhe: %1Azimuth
@@ -3728,7 +3728,7 @@ Peruuta tehdäksesi suppeampi laiteskannaus.
Print to Image
- Tulosta kuva
+ Tulosta kuvaPrinting...
diff --git a/i18n/qfield_fr.ts b/i18n/qfield_fr.ts
index 1de9792f7b..9cfbf18940 100644
--- a/i18n/qfield_fr.ts
+++ b/i18n/qfield_fr.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Appareil de positionnement utilisé :
+ Appareil de positionnement utilisé : Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Recherche
+ RechercheMake a full service discovery
@@ -162,23 +162,23 @@ Cancel to make a minimal device scan instead.
Connected to %1
- Connecté à %1
+ Connecté à %1 Connect to %1
- Connecter à %1
+ Connecter à %1 Connect to %1
- Connecter à %1
+ Connecter à %1 Connecting to %1
- Connexion à %1
+ Connexion à %1 Use orthometric altitude from device
- Utiliser l'altitude ortho-métrique de l'appareil
+ Utiliser l'altitude ortho-métrique de l'appareilSelect the Bluetooth device from the list below:
@@ -190,7 +190,7 @@ Cancel to make a minimal device scan instead.
N/A
- ND
+ NDBluetooth device address:
@@ -209,7 +209,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- Stockage interne
+ Stockage interne
@@ -232,31 +232,31 @@ Cancel to make a minimal device scan instead.
Could not find the remote host
- Impossible de trouver l'hôte distant
+ Impossible de trouver l'hôte distantCould not find the service UUID on remote host
- Impossible de trouver l'UUID du service sur l'hôte distant
+ Impossible de trouver l'UUID du service sur l'hôte distantAttempt to read or write from socket returned an error
- Une tentative de lecture ou d'écriture à partir du socket a renvoyé une erreur
+ Une tentative de lecture ou d'écriture à partir du socket a renvoyé une erreurThe protocol is not supported on this platform
- Le protocole n'est pas supporté sur cette plateforme
+ Le protocole n'est pas supporté sur cette plateformeAn operation was attempted while the socket was in a state that did not permit it
- Une opération a été tentée alors que le socket était dans un état qui ne le permettait pas
+ Une opération a été tentée alors que le socket était dans un état qui ne le permettait pasThe remote host closed the connection
- L'hôte distant a fermé la connexion
+ L'hôte distant a fermé la connexionUnknown error
- Erreur inconnue
+ Erreur inconnue
@@ -286,19 +286,19 @@ Cancel to make a minimal device scan instead.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -425,19 +425,19 @@ Cancel to make a minimal device scan instead.
Hours
- Heures
+ HeuresMinutes
- Minutes
+ MinutesSeconds
- Secondes
+ SecondesOK
- OK
+ OK
@@ -615,7 +615,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- Dernières modifications ignorées
+ Dernières modifications ignoréesSuccessfully duplicated feature
@@ -745,7 +745,7 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
Set feature as navigation
- Définir l'entité en tant que navigation
+ Définir l'entité en tant que navigationFeature has no geometry
@@ -817,15 +817,15 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Aller à %1 %2 (SCR carte)
+ Aller à %1 %2 (SCR carte)Set navigation point
- Définir le point de navigation
+ Définir le point de navigationGo to %1° %2° (WGS84)
- Aller à %1 %2 (WGS84)
+ Aller à %1 %2 (WGS84)Go to coordinate
@@ -914,7 +914,7 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
Reload data
- Recharger les données
+ Recharger les données Reload of layer %1 triggered
@@ -934,11 +934,11 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
Read-Only Layer
- Couche en lecture seule
+ Couche en lecture seuleGeometry Locked Layer
- Couche avec géométrie verrouillée
+ Couche avec géométrie verrouilléeThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1007,7 +1007,7 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
Cannot add new feature in layer "%1".
- Impossible d'ajouter une nouvelle entité dans la couche "%1".
+ Impossible d'ajouter une nouvelle entité dans la couche "%1".
@@ -1083,18 +1083,18 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
LocatorItemSearch…
- Recherche...
+ Recherche...LocatorSettingsSearch Settings
- Paramètres de recherche
+ Paramètres de rechercheTrigger without its prefix
- Déclencher sans son préfixe
+ Déclencher sans son préfixeSearch Bar Settings
@@ -1223,15 +1223,15 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
Printing atlas feature(s) to PDF
- Impression des entités de l'atlas en PDF
+ Impression des entités de l'atlas en PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- La ou les entités de l'atlas ont été imprimées avec succès en PDF et placées dans vos documents.
+ La ou les entités de l'atlas ont été imprimées avec succès en PDF et placées dans vos documents.Print Atlas Feature(s) to Image
- Imprimer les caractéristiques de l'Atlas sur l'image
+ Imprimer les caractéristiques de l'Atlas sur l'imagePrint Atlas Feature to Image
@@ -1254,7 +1254,7 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1262,11 +1262,11 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
Lon.
- Lon.
+ Lon.centroid
- centroïde
+ centroïdeLon
@@ -1331,7 +1331,7 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
Last changes discarded
- Dernières modifications ignorées
+ Dernières modifications ignoréesConstraints not valid
@@ -1342,15 +1342,15 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
PlatformUtilitiesSelect Media File
- Sélectionnez le fichier multimédia.
+ Sélectionnez le fichier multimédia.JPEG images (*.jpg *.jpeg)
- Images JPEG (*.jpg *.jpeg)
+ Images JPEG (*.jpg *.jpeg)Failed to save gallery picture
- Échec de l'enregistrement de l'image dans la galerie.
+ Échec de l'enregistrement de l'image dans la galerie.Open File
@@ -1394,7 +1394,7 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
Audio files (*.mp3 *.aac *.ogg)
- Fichiers audio(*.mp3 *.aac *.ogg)
+ Fichiers audio(*.mp3 *.aac *.ogg)All files (*.*)
@@ -1413,71 +1413,71 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- ND
+ NDX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Altitude
+ AltitudeSpeed
- Vitesse
+ VitesseH. Accuracy
- Précision H.
+ Précision H.V. Accuracy
- Précision V.
+ Précision V.PDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Valide
+ ValideFix
- Fix
+ FixQuality
- Qualité
+ Qualité
@@ -1507,7 +1507,7 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1678,7 +1678,7 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
QFieldCloudLoginFailed to login
- Échec à la connexion
+ Échec à la connexionFailed to sign in
@@ -1719,15 +1719,15 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
Logout
- Déconnexion
+ DéconnexionLogging in, please wait
- Connexion en cours, veuillez patienter
+ Connexion en cours, veuillez patienterLogin
- Connexion
+ ConnexionThe easiest way to transfer you project from QGIS to your devices!
@@ -1742,11 +1742,11 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Empaquetage des couches QFieldCloud problématique
+ Empaquetage des couches QFieldCloud problématiqueSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Certaines couches n'ont pas été empaquetées correctement sur QFieldCloud. Ces couches sont peut-être mal configurées ou la source de données n'est pas accessible depuis le serveur QFieldCloud.
+ Certaines couches n'ont pas été empaquetées correctement sur QFieldCloud. Ces couches sont peut-être mal configurées ou la source de données n'est pas accessible depuis le serveur QFieldCloud.QFieldCloud had troubles packaging your project
@@ -1857,7 +1857,7 @@ Les géométries des objets vont être combinées dans l'objet '%1&apo
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Annulez toutes les entités modifiées dans les couches locales du nuage. Vous ne pouvez pas restaurer ces modifications.
+ Annulez toutes les entités modifiées dans les couches locales du nuage. Vous ne pouvez pas restaurer ces modifications.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1905,7 +1905,7 @@ Même si vous pouvez toujours voir et utiliser ce projet, il est fortement recom
%n attachment(s) are currently being uploaded in the background.
- %n pièce jointe est actuellement envoyée en tâche de fond.%n pièces jointes sont actuellement envoyées en tâche de fond.%n pièces jointes sont actuellement envoyées en tâche de fond.
+ %n pièce jointe est actuellement envoyée en tâche de fond.%n pièces jointes sont actuellement envoyées en tâche de fond.%n pièces jointes sont actuellement envoyées en tâche de fond.Should local changes be reverted?
@@ -1940,29 +1940,29 @@ Même si vous pouvez toujours voir et utiliser ce projet, il est fortement recom
QFieldCloudProjectsModelExport failed
- L'exportation a échoué
+ L'exportation a échouéPackaged layer '%1' is not valid: '%2'
- La couche empaquetée '%1' n'est pas valide: '%2'
+ La couche empaquetée '%1' n'est pas valide: '%2'Failed to open temporary file for "%1", reason:
%2
- Impossible d'ouvrir le fichier temporaire pour "%1", raison : %2
+ Impossible d'ouvrir le fichier temporaire pour "%1", raison : %2Failed to upload attachment stored at "%1", reason:
%2
- Impossible de télécharger la pièce jointe stockée à "%1", raison :%2
+ Impossible de télécharger la pièce jointe stockée à "%1", raison :%2Failed to download file "%1", reason:
- Échec du téléchargement du fichier "%1", raison :
+ Échec du téléchargement du fichier "%1", raison :Failed to write downloaded file stored at "%1", fs reason:
- Échec d'enregistrement du fichier téléchargé sur "%1"; erreur du système de fichier:
+ Échec d'enregistrement du fichier téléchargé sur "%1"; erreur du système de fichier:aborted
@@ -2033,7 +2033,7 @@ Même si vous pouvez toujours voir et utiliser ce projet, il est fortement recom
Failed to upload attachment stored at `%1`, reason:
%2
- Impossible d'envoyer la pièce jointe stockée à `%1`, raison:
+ Impossible d'envoyer la pièce jointe stockée à `%1`, raison:
%2
@@ -2319,7 +2319,7 @@ Même si vous pouvez toujours voir et utiliser ce projet, il est fortement recom
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Si activé, la luminosité de l'écran sera atténuée après 20 secondes d’inactivité pour préserver la batterie.
+ Si activé, la luminosité de l'écran sera atténuée après 20 secondes d’inactivité pour préserver la batterie. Consider mouse as a touchscreen device
@@ -2375,36 +2375,36 @@ Même si vous pouvez toujours voir et utiliser ce projet, il est fortement recom
Scanning for paired devices
- Recherche d'appareils couplés
+ Recherche d'appareils couplésScanning failed: %1
- L'analyse a échoué : %1
+ L'analyse a échoué : %1Scanning done
- Recherche terminée
+ Recherche terminée %n device(s) found
- %n appareil trouvé%n appareils trouvés%n appareils trouvés
+ %n appareil trouvé%n appareils trouvés%n appareils trouvésScanning canceled
- Recherche annulée
+ Recherche annuléeScan
- Recherche
+ RechercheMake a full service discovery
- Faire une découverte complète du service
+ Faire une découverte complète du serviceA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- L'analyse complète de l'appareil peut prendre plus de temps. Souhaitez-vous poursuivre ? Annuler pour réaliser une analyse minimale à la place.
+ L'analyse complète de l'appareil peut prendre plus de temps. Souhaitez-vous poursuivre ? Annuler pour réaliser une analyse minimale à la place.Connected to %1
@@ -2412,7 +2412,7 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Connecter à %1
+ Connecter à %1 Connecting to %1
@@ -2472,7 +2472,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Les valeurs Z collectées par l'appareil vont être corrigées par cette valeur. Si une valeur de 1.6 m est entrée, toutes les valeurs collectées vont recevoir une correction de -1.6 m
+ Les valeurs Z collectées par l'appareil vont être corrigées par cette valeur. Si une valeur de 1.6 m est entrée, toutes les valeurs collectées vont recevoir une correction de -1.6 mSkip altitude correction
@@ -2770,7 +2770,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- Chargement de la police %1
+ Chargement de la police %1
@@ -2831,7 +2831,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- La rotation de la carte n'est pas supportée. Réinitialisation de %1 à 0.
+ La rotation de la carte n'est pas supportée. Réinitialisation de %1 à 0.
@@ -2935,7 +2935,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Préparation de QField, opération ponctuelle qui peut prendre un certain temps
+ Préparation de QField, opération ponctuelle qui peut prendre un certain temps
@@ -2977,7 +2977,7 @@ Cancel to make a minimal device scan instead.
The connection was refused by the remote hose
- La connexion a été refusée par le flexible déporté
+ La connexion a été refusée par le flexible déportéUDP receiver error (%1)
@@ -3042,11 +3042,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- Enregistrer lorsque les deux contraintes sont actives simultanément
+ Enregistrer lorsque les deux contraintes sont actives simultanémentWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Les sommets ne seront enregistrés que lorsque toutes les contraintes actives sont respectées lorsque ce paramètre est activé. S'il est désactivé, les contraintes individuelles rencontrées entraîneront la création d'un sommet.
+ Les sommets ne seront enregistrés que lorsque toutes les contraintes actives sont respectées lorsque ce paramètre est activé. S'il est désactivé, les contraintes individuelles rencontrées entraîneront la création d'un sommet.Start tracking
@@ -3054,11 +3054,11 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- Impossible de démarrer un suivi avec des valeurs vides
+ Impossible de démarrer un suivi avec des valeurs videsWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- Lorsque les deux contraintes sont désactivées, les ajouts de sommets se produiront aussi fréquemment que fournis par le dispositif de positionnement.
+ Lorsque les deux contraintes sont désactivées, les ajouts de sommets se produiront aussi fréquemment que fournis par le dispositif de positionnement.Measure (M) value attached to vertices:
@@ -3164,7 +3164,7 @@ Cancel to make a minimal device scan instead.
The connection was refused by the remote hose
- La connexion a été refusée par le flexible déporté
+ La connexion a été refusée par le flexible déportéUDP receiver error (%1)
@@ -3253,11 +3253,11 @@ Cancel to make a minimal device scan instead.
Base map project
- Fond de carte du projet
+ Fond de carte du projetBase Map Project
- Fond de carte du projet
+ Fond de carte du projetRemove from Recent Projects
@@ -3265,7 +3265,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Bienvenue dans QField. C'est votre première utilisation de l'application ? Essayez les projets d'exemple listés ci-dessous.
+ Bienvenue dans QField. C'est votre première utilisation de l'application ? Essayez les projets d'exemple listés ci-dessous.Welcome back to QField.
@@ -3435,11 +3435,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- Positionnement activé
+ Positionnement activéPositioning turned off
- Positionnement désactivé
+ Positionnement désactivéCanvas stopped following location
@@ -3467,7 +3467,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- Impression en PDF
+ Impression en PDFGo to Home Screen
@@ -3479,7 +3479,7 @@ Cancel to make a minimal device scan instead.
Open Project
- Ouvrir un projet
+ Ouvrir un projetSettings
@@ -3495,7 +3495,7 @@ Cancel to make a minimal device scan instead.
Select template below
- Sélectionner un modèle ci-dessous
+ Sélectionner un modèle ci-dessousActivating positioning service
@@ -3520,7 +3520,7 @@ pour utiliser la géolocalisation
Add Bookmark at Coordinates
- Ajouter un Signet aux Coordonnées
+ Ajouter un Signet aux CoordonnéesUntitled bookmark
@@ -3528,7 +3528,7 @@ pour utiliser la géolocalisation
Set Coordinates as Destination
- Définir les Coordonnées comme Destination
+ Définir les Coordonnées comme DestinationCopy Coordinates
@@ -3536,11 +3536,11 @@ pour utiliser la géolocalisation
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3552,27 +3552,27 @@ pour utiliser la géolocalisation
0.25m Precision
- 0.25m Précision
+ 0.25m Précision0.5m Precision
- 0.5m Précision
+ 0.5m Précision1m Precision
- 1m Précision
+ 1m Précision2.5m Precision
- 2.5m Précision
+ 2.5m Précision5m Precision
- 5m Précision
+ 5m Précision10m Precision
- 10m Précision
+ 10m PrécisionAlways Show Precise View
@@ -3600,7 +3600,7 @@ pour utiliser la géolocalisation
Set As Destination
- Définir Comme Destination
+ Définir Comme DestinationNavigation Options
@@ -3636,11 +3636,11 @@ pour utiliser la géolocalisation
Center to Current Location
- Centrer sur la localisation actuelle
+ Centrer sur la localisation actuelleAdd Bookmark at Current Location
- Ajouter un Signet à la Position Actuelle
+ Ajouter un Signet à la Position ActuelleCurrent location unknown
@@ -3652,7 +3652,7 @@ pour utiliser la géolocalisation
Copy Current Location
- Copier la Position Actuelle
+ Copier la Position ActuelleAccuracy
@@ -3680,7 +3680,7 @@ pour utiliser la géolocalisation
Logged out
- Déconnecté
+ DéconnectéConnecting...
@@ -3688,7 +3688,7 @@ pour utiliser la géolocalisation
Logged in
- Connecté
+ ConnectéProject %1 failed to download
@@ -3713,7 +3713,7 @@ fermer le projet et quitter l'application
Positioning error: %1
- Erreur de positionnement : %1
+ Erreur de positionnement : %1Azimuth
@@ -3725,7 +3725,7 @@ fermer le projet et quitter l'application
Print to Image
- Imprimer sur image
+ Imprimer sur imagePrinting...
diff --git a/i18n/qfield_gl.ts b/i18n/qfield_gl.ts
index a806805ed9..b1703459ab 100644
--- a/i18n/qfield_gl.ts
+++ b/i18n/qfield_gl.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Dispositivo de posicionamento en uso:
+ Dispositivo de posicionamento en uso:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Explorar
+ ExplorarMake a full service discovery
@@ -163,23 +163,23 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Connected to %1
- Conectado a %1
+ Conectado a %1Connect to %1
- Conectar a %1
+ Conectar a %1Connect to %1
- Conectar a %1
+ Conectar a %1Connecting to %1
- Conectando a %1
+ Conectando a %1Use orthometric altitude from device
- Utilizar a altitude ortométrica do dispositivo
+ Utilizar a altitude ortométrica do dispositivoSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
N/A
- Sen Datos
+ Sen DatosBluetooth device address:
@@ -210,7 +210,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.BluetoothDeviceModel
Internal device
- Dispositivo interno
+ Dispositivo interno
@@ -233,31 +233,31 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Could not find the remote host
- Non se puido atopar o servidor remoto
+ Non se puido atopar o servidor remotoCould not find the service UUID on remote host
- Non se puido atopar a UUID de servizo no servidor remoto
+ Non se puido atopar a UUID de servizo no servidor remotoAttempt to read or write from socket returned an error
- A tentativa de lectura ou escritura do socket devolveu un erro
+ A tentativa de lectura ou escritura do socket devolveu un erroThe protocol is not supported on this platform
- Non se admite o protocolo nesta plataforma
+ Non se admite o protocolo nesta plataformaAn operation was attempted while the socket was in a state that did not permit it
- Tentouse unha operación mentres o socket estaba nun estado que non o permitía
+ Tentouse unha operación mentres o socket estaba nun estado que non o permitíaThe remote host closed the connection
- O servidor remoto pechou a conexión
+ O servidor remoto pechou a conexiónUnknown error
- Erro descoñecido
+ Erro descoñecido
@@ -287,19 +287,19 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Hours
- Horas
+ HorasMinutes
- Minutos
+ MinutosSeconds
- Segundos
+ SegundosOK
- OK
+ OK
@@ -616,7 +616,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Last changes discarded
- Descartados os últimos cambios
+ Descartados os últimos cambiosSuccessfully duplicated feature
@@ -744,7 +744,7 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
Set feature as navigation
- Establecer entidade como navegación
+ Establecer entidade como navegaciónFeature has no geometry
@@ -816,15 +816,15 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Ir a %1 %2 (SRC do Mapa)
+ Ir a %1 %2 (SRC do Mapa)Set navigation point
- Establecer punto de navegación
+ Establecer punto de navegaciónGo to %1° %2° (WGS84)
- Ir a %1° %2° (WGS84)
+ Ir a %1° %2° (WGS84)Go to coordinate
@@ -913,7 +913,7 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
Reload data
- Recargar datos
+ Recargar datosReload of layer %1 triggered
@@ -933,11 +933,11 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
Read-Only Layer
- Capa de Só Lectura
+ Capa de Só LecturaGeometry Locked Layer
- Capa Xeométrica Bloqueada
+ Capa Xeométrica BloqueadaThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1006,7 +1006,7 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
Cannot add new feature in layer "%1".
- Non se pode engadir unha nova entidade na capa "%1".
+ Non se pode engadir unha nova entidade na capa "%1".
@@ -1082,18 +1082,18 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
LocatorItemSearch…
- Buscar...
+ Buscar...LocatorSettingsSearch Settings
- Configuración da Busca
+ Configuración da BuscaTrigger without its prefix
- Despregar sen o seu prefixo
+ Despregar sen o seu prefixoSearch Bar Settings
@@ -1222,15 +1222,15 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
Printing atlas feature(s) to PDF
- Imprimindo as entidade(s) do atlas a PDF
+ Imprimindo as entidade(s) do atlas a PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Imprimíronse con éxito as entidade(s) do Atlas a PDF e situáronse no directorio de documentos
+ Imprimíronse con éxito as entidade(s) do Atlas a PDF e situáronse no directorio de documentosPrint Atlas Feature(s) to Image
- Imprimir as Entidade(s) do Atlas a Imaxe
+ Imprimir as Entidade(s) do Atlas a ImaxePrint Atlas Feature to Image
@@ -1253,7 +1253,7 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1261,11 +1261,11 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
Lon.
- Lon.
+ Lon.centroid
- centroide
+ centroideLon
@@ -1330,7 +1330,7 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
Last changes discarded
- Descartados os últimos cambios
+ Descartados os últimos cambiosConstraints not valid
@@ -1341,15 +1341,15 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
PlatformUtilitiesSelect Media File
- Selecciona o Ficheiro Multimedia
+ Selecciona o Ficheiro MultimediaJPEG images (*.jpg *.jpeg)
- Imaxes JPEG (*.jpg *.jpeg)
+ Imaxes JPEG (*.jpg *.jpeg)Failed to save gallery picture
- Non se puido gardar a imaxe da galería
+ Non se puido gardar a imaxe da galeríaOpen File
@@ -1393,7 +1393,7 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
Audio files (*.mp3 *.aac *.ogg)
- Ficheiros de audio (*.mp3 *.aac *.ogg)
+ Ficheiros de audio (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1412,71 +1412,71 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- Sen Datos
+ Sen DatosX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Altitude
+ AltitudeSpeed
- Velocidade
+ VelocidadeH. Accuracy
- Precisión H.
+ Precisión H.V. Accuracy
- Precisión V.
+ Precisión V.PDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Válido
+ VálidoFix
- Fixo
+ FixoQuality
- Calidade
+ Calidade
@@ -1506,7 +1506,7 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1677,7 +1677,7 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
QFieldCloudLoginFailed to login
- Produciuse un erro ó iniciar sesión
+ Produciuse un erro ó iniciar sesiónFailed to sign in
@@ -1719,15 +1719,15 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
Logout
- Saír da sesión
+ Saír da sesiónLogging in, please wait
- Iniciando sesión, por favor, agarde
+ Iniciando sesión, por favor, agardeLogin
- Iniciar sesión
+ Iniciar sesiónThe easiest way to transfer you project from QGIS to your devices!
@@ -1742,11 +1742,11 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Empaquetado problemático da capa de QFieldCloud
+ Empaquetado problemático da capa de QFieldCloudSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Algunhas capas non se empaquetaron correctamente en QFieldCloud. Estas capas poden estar mal configuradas ou non ter accesible a súa fonte de datos do servidor de QFieldCloud.
+ Algunhas capas non se empaquetaron correctamente en QFieldCloud. Estas capas poden estar mal configuradas ou non ter accesible a súa fonte de datos do servidor de QFieldCloud.QFieldCloud had troubles packaging your project
@@ -1857,7 +1857,7 @@ As xeometrías das entidades combinaranse na entidade '%1', a cal cons
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Revirte tódalas entidades modificadas nas capas da nube locais. Non poderás restablecer estes cambios.
+ Revirte tódalas entidades modificadas nas capas da nube locais. Non poderás restablecer estes cambios.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1905,7 +1905,7 @@ Aínda que podes seguir vendo e utilizando este proxecto, recoméndase fortement
%n attachment(s) are currently being uploaded in the background.
- %n anexo está a subirse en segundo plano.%n anexos están a subirse en segundo plano.
+ %n anexo está a subirse en segundo plano.%n anexos están a subirse en segundo plano.Should local changes be reverted?
@@ -1940,31 +1940,31 @@ Aínda que podes seguir vendo e utilizando este proxecto, recoméndase fortement
QFieldCloudProjectsModelExport failed
- Non se puido exportar
+ Non se puido exportarPackaged layer '%1' is not valid: '%2'
- A capa empaquetada '%1' non é válida: '%2'
+ A capa empaquetada '%1' non é válida: '%2'Failed to open temporary file for "%1", reason:
%2
- Non se puido abrir o ficheiro temporal para "%1", motivo:
+ Non se puido abrir o ficheiro temporal para "%1", motivo:
%2Failed to upload attachment stored at "%1", reason:
%2
- Non se puido subir o ficheiro anexo almacenado en "%1", motivo:
+ Non se puido subir o ficheiro anexo almacenado en "%1", motivo:
%2Failed to download file "%1", reason:
- Non se pode descargar o ficheiro "%1", motivo:
+ Non se pode descargar o ficheiro "%1", motivo:Failed to write downloaded file stored at "%1", fs reason:
- Non se puido gravar o ficheiro descargado almacenado en "%1", motivo:
+ Non se puido gravar o ficheiro descargado almacenado en "%1", motivo:aborted
@@ -2035,7 +2035,7 @@ Aínda que podes seguir vendo e utilizando este proxecto, recoméndase fortement
Failed to upload attachment stored at `%1`, reason:
%2
- Non se puido subir o ficheiro anexo almacenado en `%1`, motivo:
+ Non se puido subir o ficheiro anexo almacenado en `%1`, motivo:
%2
@@ -2321,7 +2321,7 @@ Aínda que podes seguir vendo e utilizando este proxecto, recoméndase fortement
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- De activarse, o brillo da pantalla escurecerase logo de 20 segundos de inactividade para preservar a batería.
+ De activarse, o brillo da pantalla escurecerase logo de 20 segundos de inactividade para preservar a batería.Consider mouse as a touchscreen device
@@ -2377,36 +2377,36 @@ Aínda que podes seguir vendo e utilizando este proxecto, recoméndase fortement
Scanning for paired devices
- Buscando dispositivos emparellados
+ Buscando dispositivos emparelladosScanning failed: %1
- Erro na exploración: %1
+ Erro na exploración: %1Scanning done
- Exploración concluída
+ Exploración concluída%n device(s) found
- %n dispositivo atopado%n dispositivos atopados
+ %n dispositivo atopado%n dispositivos atopadosScanning canceled
- Exploración cancelada
+ Exploración canceladaScan
- Explorar
+ ExplorarMake a full service discovery
- Levar a cabo unha descuberta do servizo completo
+ Levar a cabo unha descuberta do servizo completoA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Unha exploración completa do equipo pode levar algún tempo. Queres continuar?
+ Unha exploración completa do equipo pode levar algún tempo. Queres continuar?
Cancela para facer, porén, unha exploración mínima do dispositivo.
@@ -2415,7 +2415,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Connect to %1
- Conectar a %1
+ Conectar a %1Connecting to %1
@@ -2475,7 +2475,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Os valores Z que se gravan do dispositivo de posicionamento corrixiranse con este valor. Se un valor de 1,6 se introduce, producirá unha corrección de -1,6 para cada valor rexistrado.
+ Os valores Z que se gravan do dispositivo de posicionamento corrixiranse con este valor. Se un valor de 1,6 se introduce, producirá unha corrección de -1,6 para cada valor rexistrado.Skip altitude correction
@@ -2773,7 +2773,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Loading font %1
- Cargando a fonte %1
+ Cargando a fonte %1
@@ -2834,7 +2834,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.QgsQuickMapSettings
Map Canvas rotation is not supported. Resetting from %1 to 0.
- Non se admite a rotación da Vista do Mapa. Restablecendo de %1 a 0.
+ Non se admite a rotación da Vista do Mapa. Restablecendo de %1 a 0.
@@ -2938,7 +2938,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.SystemLoader
Preparing QField, this is a one time operation that might take some time
- Preparando QField, esta é unha única operación que pode levar algún tempo
+ Preparando QField, esta é unha única operación que pode levar algún tempo
@@ -2980,7 +2980,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
The connection was refused by the remote hose
- Rexeitouse a conexión polo hospedador remoto
+ Rexeitouse a conexión polo hospedador remotoUDP receiver error (%1)
@@ -3045,11 +3045,11 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Record when both active constraints are met
- Rexistrar cando se estean activadas ámbalas restricións
+ Rexistrar cando se estean activadas ámbalas restriciónsWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Cando se activa, os vértices só se rexistrarán cando estean activadas ámbalas restricións. Se a configuración está desactivada, as restricións individuais dadas desencadearán unha adición de vértice.
+ Cando se activa, os vértices só se rexistrarán cando estean activadas ámbalas restricións. Se a configuración está desactivada, as restricións individuais dadas desencadearán unha adición de vértice.Start tracking
@@ -3057,11 +3057,11 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Cannot start track with empty values
- O seguimento non pode comezar con valores baleiros
+ O seguimento non pode comezar con valores baleirosWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- Cando ámbalas restricións se desactivan, a adición de vértices ocorrerá tan frecuentemente como se envíen dende o dispositivo de posicionamento.
+ Cando ámbalas restricións se desactivan, a adición de vértices ocorrerá tan frecuentemente como se envíen dende o dispositivo de posicionamento.Measure (M) value attached to vertices:
@@ -3167,7 +3167,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
The connection was refused by the remote hose
- Rexeitouse a conexión polo hospedador remoto
+ Rexeitouse a conexión polo hospedador remotoUDP receiver error (%1)
@@ -3256,11 +3256,11 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Base map project
- Proxecto de mapa base
+ Proxecto de mapa baseBase Map Project
- Proxecto de Mapa Base
+ Proxecto de Mapa BaseRemove from Recent Projects
@@ -3268,7 +3268,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Benvido a QField. É a primeira vez utilizando a aplicación? Proba os proxectos de exemplo amosados na lista de abaixo.
+ Benvido a QField. É a primeira vez utilizando a aplicación? Proba os proxectos de exemplo amosados na lista de abaixo.Welcome back to QField.
@@ -3438,11 +3438,11 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Positioning activated
- Posicionamento activado
+ Posicionamento activadoPositioning turned off
- Posicionamento apagado
+ Posicionamento apagadoCanvas stopped following location
@@ -3470,7 +3470,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Printing to PDF
- Imprimir a PDF
+ Imprimir a PDFGo to Home Screen
@@ -3482,7 +3482,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Open Project
- Abrir Proxecto
+ Abrir ProxectoSettings
@@ -3498,7 +3498,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Select template below
- Selecciona un modelo de abaixo
+ Selecciona un modelo de abaixoActivating positioning service
@@ -3522,7 +3522,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Add Bookmark at Coordinates
- Engadir Marcador a Coordenadas
+ Engadir Marcador a CoordenadasUntitled bookmark
@@ -3530,7 +3530,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Set Coordinates as Destination
- Establecer as Coordenadas como Destino
+ Establecer as Coordenadas como DestinoCopy Coordinates
@@ -3538,11 +3538,11 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3554,27 +3554,27 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
0.25m Precision
- Precisión de 0.25m
+ Precisión de 0.25m0.5m Precision
- Precisión de 0.5m
+ Precisión de 0.5m1m Precision
- Precisión de 1m
+ Precisión de 1m2.5m Precision
- Precisión de 2.5m
+ Precisión de 2.5m5m Precision
- Precisión de 5m
+ Precisión de 5m10m Precision
- Precisión de 10m
+ Precisión de 10mAlways Show Precise View
@@ -3602,7 +3602,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Set As Destination
- Establecer Como Destino
+ Establecer Como DestinoNavigation Options
@@ -3638,11 +3638,11 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Center to Current Location
- Centrar á Localización Actual
+ Centrar á Localización ActualAdd Bookmark at Current Location
- Engadir Marcador na Posición Actual
+ Engadir Marcador na Posición ActualCurrent location unknown
@@ -3654,7 +3654,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Copy Current Location
- Copiar a Localización Actual
+ Copiar a Localización ActualAccuracy
@@ -3682,7 +3682,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Logged out
- Saíches da sesión
+ Saíches da sesiónConnecting...
@@ -3690,7 +3690,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Logged in
- Sesión iniciada
+ Sesión iniciadaProject %1 failed to download
@@ -3714,7 +3714,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Positioning error: %1
- Erro de posicionamento: %1
+ Erro de posicionamento: %1Azimuth
@@ -3726,7 +3726,7 @@ Cancela para facer, porén, unha exploración mínima do dispositivo.
Print to Image
- Imprimir a Imaxe
+ Imprimir a ImaxePrinting...
diff --git a/i18n/qfield_hr.ts b/i18n/qfield_hr.ts
index 993a965320..1272d9127a 100644
--- a/i18n/qfield_hr.ts
+++ b/i18n/qfield_hr.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Uređaj za pozicioniranje u upotrebi:
+ Uređaj za pozicioniranje u upotrebi:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Skeniraj
+ SkenirajMake a full service discovery
@@ -163,23 +163,23 @@ Otkažite za pokretanje minimalnog skeniranja uređaja.
Connected to %1
- Povezano na %1
+ Povezano na %1Connect to %1
- Poveži na %1
+ Poveži na %1Connect to %1
- Poveži na %1
+ Poveži na %1Connecting to %1
- Povezivanje na %1
+ Povezivanje na %1Use orthometric altitude from device
- Koristi ortometrijsku visinu uređaja
+ Koristi ortometrijsku visinu uređajaSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Otkažite za pokretanje minimalnog skeniranja uređaja.
N/A
- Nedostupno
+ NedostupnoBluetooth device address:
@@ -210,7 +210,7 @@ Otkažite za pokretanje minimalnog skeniranja uređaja.
BluetoothDeviceModelInternal device
- Unutarnji uređaj
+ Unutarnji uređaj
@@ -233,31 +233,31 @@ Otkažite za pokretanje minimalnog skeniranja uređaja.
Could not find the remote host
- Ne mogu pronaći udaljeni poslužitelj
+ Ne mogu pronaći udaljeni poslužiteljCould not find the service UUID on remote host
- Ne mogu pronaći uslugu UUID na udaljenom poslužitelju
+ Ne mogu pronaći uslugu UUID na udaljenom poslužiteljuAttempt to read or write from socket returned an error
- Dogodila se greška prilikom pokušaja čitanja ili pisanja iz utičnice
+ Dogodila se greška prilikom pokušaja čitanja ili pisanja iz utičniceThe protocol is not supported on this platform
- Protokol nije podržan na ovoj platformi
+ Protokol nije podržan na ovoj platformiAn operation was attempted while the socket was in a state that did not permit it
- Pokušana je operacija dok je utičnica bila u stanju koji ne dozvoljava tu operaciju
+ Pokušana je operacija dok je utičnica bila u stanju koji ne dozvoljava tu operacijuThe remote host closed the connection
- Udaljeni poslužitelj je zatvorio konekciju
+ Udaljeni poslužitelj je zatvorio konekcijuUnknown error
- Nepoznata greška
+ Nepoznata greška
@@ -287,19 +287,19 @@ Otkažite za pokretanje minimalnog skeniranja uređaja.
Lon
- Dužina
+ DužinaLat
- Širina
+ ŠirinaX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Otkažite za pokretanje minimalnog skeniranja uređaja.
Hours
- Sati
+ SatiMinutes
- Minute
+ MinuteSeconds
- Sekunde
+ SekundeOK
- OK
+ OK
@@ -616,7 +616,7 @@ Otkažite za pokretanje minimalnog skeniranja uređaja.
Last changes discarded
- Zadnje promjene odbačene
+ Zadnje promjene odbačene Successfully duplicated feature
@@ -746,7 +746,7 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
Set feature as navigation
- Postavi element kao navigaciju
+ Postavi element kao navigacijuFeature has no geometry
@@ -818,15 +818,15 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Idi na %1 %2 (CRS Karte)
+ Idi na %1 %2 (CRS Karte)Set navigation point
- Postavi navigacijsku točku
+ Postavi navigacijsku točkuGo to %1° %2° (WGS84)
- Idi na %1° %2° (WGS84)
+ Idi na %1° %2° (WGS84)Go to coordinate
@@ -915,7 +915,7 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
Reload data
- Ponovo učitaj podatke
+ Ponovo učitaj podatkeReload of layer %1 triggered
@@ -935,11 +935,11 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
Read-Only Layer
- Sloj u konfiguraciji "Samo za čitanje"
+ Sloj u konfiguraciji "Samo za čitanje"Geometry Locked Layer
- Sloj sa Zaključanom Geometrijom
+ Sloj sa Zaključanom GeometrijomThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1008,7 +1008,7 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
Cannot add new feature in layer "%1".
- Nije moguće dodati novi element u sloj "%1".
+ Nije moguće dodati novi element u sloj "%1".
@@ -1084,18 +1084,18 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
LocatorItemSearch…
- Pretraži...
+ Pretraži...LocatorSettingsSearch Settings
- Postavke pretraživanja
+ Postavke pretraživanjaTrigger without its prefix
- Pokreni bez prefixa
+ Pokreni bez prefixaSearch Bar Settings
@@ -1224,15 +1224,15 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
Printing atlas feature(s) to PDF
- Ispisujem element(e) atlasa u PDF
+ Ispisujem element(e) atlasa u PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Element(i) atlasa uspješno su ispisani u PDF i smješteni u vaše dokumente.
+ Element(i) atlasa uspješno su ispisani u PDF i smješteni u vaše dokumente.Print Atlas Feature(s) to Image
- Isprintaj stavku(e) Atlasa u sliku
+ Isprintaj stavku(e) Atlasa u slikuPrint Atlas Feature to Image
@@ -1255,7 +1255,7 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
NavigationInformationViewLat.
- Širina.
+ Širina.X
@@ -1263,11 +1263,11 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
Lon.
- Dužina
+ Dužinacentroid
- centroid
+ centroidLon
@@ -1332,7 +1332,7 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
Last changes discarded
- Zadnje promjene zanemarene
+ Zadnje promjene zanemareneConstraints not valid
@@ -1343,15 +1343,15 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
PlatformUtilitiesSelect Media File
- Izaberi Multimedijsku Datoteku
+ Izaberi Multimedijsku DatotekuJPEG images (*.jpg *.jpeg)
- JPEG fotografije (*.jpg *.jpeg)
+ JPEG fotografije (*.jpg *.jpeg)Failed to save gallery picture
- Nije uspjelo spremanje fotografije iz galerije
+ Nije uspjelo spremanje fotografije iz galerijeOpen File
@@ -1395,7 +1395,7 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
Audio files (*.mp3 *.aac *.ogg)
- Audio datoteke (*.mp3 *.aac *.ogg)
+ Audio datoteke (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1414,71 +1414,71 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
PositionInformationViewLat.
- Širina.
+ Širina.N/A
- N/A
+ N/AX
- X
+ XLon.
- Dužina.
+ Dužina.Lon
- Dužina
+ DužinaY
- Y
+ YLat
- Širina
+ ŠirinaAltitude
- Visina
+ VisinaSpeed
- Brzina
+ BrzinaH. Accuracy
- H. točnost
+ H. točnostV. Accuracy
- V. točnost
+ V. točnostPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Valjano
+ ValjanoFix
- Fiksirano
+ FiksiranoQuality
- Kvaliteta
+ Kvaliteta
@@ -1508,7 +1508,7 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1679,7 +1679,7 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
QFieldCloudLoginFailed to login
- Neuspješna prijava
+ Neuspješna prijava Failed to sign in
@@ -1721,15 +1721,15 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
Logout
- Odjava
+ OdjavaLogging in, please wait
- Prijavljivanje, molimo pričekajte
+ Prijavljivanje, molimo pričekajteLogin
- Prijava
+ PrijavaThe easiest way to transfer you project from QGIS to your devices!
@@ -1744,11 +1744,11 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Problematično pakiranje QFieldCloud slojeva
+ Problematično pakiranje QFieldCloud slojevaSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Neki slojevi nisu ispravno zapakirani na QFieldCloud-u. Ovi slojevi možda nisu dobro konfigurirani ili njihov izvor podataka nije dostupan sa QFieldCloud servera.
+ Neki slojevi nisu ispravno zapakirani na QFieldCloud-u. Ovi slojevi možda nisu dobro konfigurirani ili njihov izvor podataka nije dostupan sa QFieldCloud servera. QFieldCloud had troubles packaging your project
@@ -1859,7 +1859,7 @@ Geometrija elemenata će se spojiti u element '%1', koji će zadržati
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Vratite sve promijenjene elemente u lokalnoj verziji sloja iz oblaka. Ne možete vratiti ove promjene.
+ Vratite sve promijenjene elemente u lokalnoj verziji sloja iz oblaka. Ne možete vratiti ove promjene.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1905,7 +1905,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- %n prilog(a) se trenutno šalje u pozadini.%n prilog(a) se trenutno šalje u pozadini.%n prilog(a) se trenutno šalje u pozadini.
+ %n prilog(a) se trenutno šalje u pozadini.%n prilog(a) se trenutno šalje u pozadini.%n prilog(a) se trenutno šalje u pozadini.Should local changes be reverted?
@@ -1940,29 +1940,29 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Izvoz nije uspio
+ Izvoz nije uspioPackaged layer '%1' is not valid: '%2'
- Zapakirani sloj '%1' nije valjan: '%2'
+ Zapakirani sloj '%1' nije valjan: '%2'Failed to open temporary file for "%1", reason:
%2
- Nije uspjelo otvaranje privremene datoteke za "%1", razlog:%2
+ Nije uspjelo otvaranje privremene datoteke za "%1", razlog:%2Failed to upload attachment stored at "%1", reason:
%2
- Nije uspjelo prebacivanje priloga pohranjenog na "%1", razlog:%2
+ Nije uspjelo prebacivanje priloga pohranjenog na "%1", razlog:%2Failed to download file "%1", reason:
- Nije uspjelo preuzimanje datoteke "%1", razlog:
+ Nije uspjelo preuzimanje datoteke "%1", razlog:Failed to write downloaded file stored at "%1", fs reason:
- Nije uspjelo zapisivanje preuzete datoteke na "%1", razlog:
+ Nije uspjelo zapisivanje preuzete datoteke na "%1", razlog:aborted
@@ -2033,7 +2033,7 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to upload attachment stored at `%1`, reason:
%2
- Neuspješno učitavanje privitka spremljenog u `%1`, razlog:
+ Neuspješno učitavanje privitka spremljenog u `%1`, razlog:
%2
@@ -2319,7 +2319,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Ako je uključeno, svjetlina ekrana će biti prigušena nakon 20 sekundi nekorištenja radi štednje baterije.
+ Ako je uključeno, svjetlina ekrana će biti prigušena nakon 20 sekundi nekorištenja radi štednje baterije.Consider mouse as a touchscreen device
@@ -2375,36 +2375,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Skeniranje za uparenim uređajima
+ Skeniranje za uparenim uređajimaScanning failed: %1
- Skeniranje nije uspjelo: %1
+ Skeniranje nije uspjelo: %1Scanning done
- Skeniranje završeno
+ Skeniranje završeno%n device(s) found
- %n uređaj(a) pronađen%n uređaj(a) pronađeno%n uređaj(a) pronađeno
+ %n uređaj(a) pronađen%n uređaj(a) pronađeno%n uređaj(a) pronađenoScanning canceled
- Skeniranje završeno
+ Skeniranje završenoScan
- Skeniranje
+ SkeniranjeMake a full service discovery
- Učini punu uslugu
+ Učini punu usluguA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Puno skeniranje uređaja može trajati duže. Jeste li sigurni?
+ Puno skeniranje uređaja može trajati duže. Jeste li sigurni?
Otkažite da pokrenete minimalno skeniranje uređaja.
@@ -2413,7 +2413,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Connect to %1
- Poveži na %1
+ Poveži na %1Connecting to %1
@@ -2473,7 +2473,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Z vrijednosti koje su snimljene od uređaja za pozicioniranje će biti umanjene za ovu vrijednost. Ako je unesena vrijednost 1.6, to će rezultirati korekcijom od -1.6 za svaku snimljenu vrijednost.
+ Z vrijednosti koje su snimljene od uređaja za pozicioniranje će biti umanjene za ovu vrijednost. Ako je unesena vrijednost 1.6, to će rezultirati korekcijom od -1.6 za svaku snimljenu vrijednost.Skip altitude correction
@@ -2771,7 +2771,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Loading font %1
- Učitavanja fonta %1
+ Učitavanja fonta %1
@@ -2832,7 +2832,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Rotiranje okvira mape nije podržano. Ponovno postavljane sa %1 na 0.
+ Rotiranje okvira mape nije podržano. Ponovno postavljane sa %1 na 0.
@@ -2936,7 +2936,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Priremam QField, ova operacija se radi samo jednom i može potrajati neko vrijeme
+ Priremam QField, ova operacija se radi samo jednom i može potrajati neko vrijeme
@@ -2978,7 +2978,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
The connection was refused by the remote hose
- Konekcija je odbijena od udaljenog poslužitelja
+ Konekcija je odbijena od udaljenog poslužiteljaUDP receiver error (%1)
@@ -3043,11 +3043,11 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Record when both active constraints are met
- Snimaj kada su oba uvjeta ispunjena
+ Snimaj kada su oba uvjeta ispunjenaWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Kada je omogućeno, točke linije se mogu snimati samo uz oba ograničenja. Kada je onemogućeno, ispunjenje pojedinog ograničenja će pokrenuti dodavanje točaka linije.
+ Kada je omogućeno, točke linije se mogu snimati samo uz oba ograničenja. Kada je onemogućeno, ispunjenje pojedinog ograničenja će pokrenuti dodavanje točaka linije.Start tracking
@@ -3055,11 +3055,11 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Cannot start track with empty values
- Nije moguće pokrenuti pračenje sa praznim vrijednostima
+ Nije moguće pokrenuti pračenje sa praznim vrijednostimaWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- Kada su oba ograničenja isključena, učestalost dodavanja točaka će biti u svakom trenutku dostave podatka od prijemnika za pozicioniranje.
+ Kada su oba ograničenja isključena, učestalost dodavanja točaka će biti u svakom trenutku dostave podatka od prijemnika za pozicioniranje.Measure (M) value attached to vertices:
@@ -3165,7 +3165,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
The connection was refused by the remote hose
- Konekcija je odbijena od udaljenog poslužitelja
+ Konekcija je odbijena od udaljenog poslužiteljaUDP receiver error (%1)
@@ -3254,11 +3254,11 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Base map project
- Projekt osnovne karte
+ Projekt osnovne karteBase Map Project
- Projekt Osnovne Karte
+ Projekt Osnovne KarteRemove from Recent Projects
@@ -3266,7 +3266,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Dobrodošli u QField. Prvi put koristite aplikaciju? Probajte neki od primjera projekata sa donje liste.
+ Dobrodošli u QField. Prvi put koristite aplikaciju? Probajte neki od primjera projekata sa donje liste.Welcome back to QField.
@@ -3436,11 +3436,11 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Positioning activated
- Pozicioniranje uključeno
+ Pozicioniranje uključenoPositioning turned off
- Pozicioniranje isključeno
+ Pozicioniranje isključenoCanvas stopped following location
@@ -3468,7 +3468,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Printing to PDF
- Printanje u PDF
+ Printanje u PDFGo to Home Screen
@@ -3480,7 +3480,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Open Project
- Otvori Projekt
+ Otvori ProjektSettings
@@ -3496,7 +3496,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Select template below
- Izaberite predložak
+ Izaberite predložakActivating positioning service
@@ -3520,7 +3520,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Add Bookmark at Coordinates
- Dodaj zabilješku na koordinatama
+ Dodaj zabilješku na koordinatamaUntitled bookmark
@@ -3528,7 +3528,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Set Coordinates as Destination
- Postavi Koordinate kao Odredište
+ Postavi Koordinate kao OdredišteCopy Coordinates
@@ -3536,11 +3536,11 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3552,27 +3552,27 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
0.25m Precision
- 0,25 m preciznost
+ 0,25 m preciznost0.5m Precision
- 0,5 m preciznost
+ 0,5 m preciznost1m Precision
- 1 m preciznost
+ 1 m preciznost2.5m Precision
- 2,5 m preciznost
+ 2,5 m preciznost5m Precision
- 5 m preciznost
+ 5 m preciznost10m Precision
- 10 m preciznost
+ 10 m preciznostAlways Show Precise View
@@ -3600,7 +3600,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Set As Destination
- Postavi kao Odredište
+ Postavi kao OdredišteNavigation Options
@@ -3636,11 +3636,11 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Center to Current Location
- Centriraj na trenutnu lokaciju
+ Centriraj na trenutnu lokacijuAdd Bookmark at Current Location
- Dodaj zabilješku na trenutnoj lokaciji
+ Dodaj zabilješku na trenutnoj lokacijiCurrent location unknown
@@ -3652,7 +3652,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Copy Current Location
- Kopiraj trenutnu lokaciju
+ Kopiraj trenutnu lokacijuAccuracy
@@ -3680,7 +3680,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Logged out
- Odjavljen
+ OdjavljenConnecting...
@@ -3688,7 +3688,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Logged in
- Ulogiran
+ UlogiranProject %1 failed to download
@@ -3712,7 +3712,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Positioning error: %1
- Greška pozicioniranja: %1
+ Greška pozicioniranja: %1Azimuth
@@ -3724,7 +3724,7 @@ Otkažite da pokrenete minimalno skeniranje uređaja.
Print to Image
- Ispiši u sliku
+ Ispiši u slikuPrinting...
diff --git a/i18n/qfield_hu.ts b/i18n/qfield_hu.ts
index ed05e1b4ad..0e55dcfa7e 100644
--- a/i18n/qfield_hu.ts
+++ b/i18n/qfield_hu.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Használt helymeghatározó eszköz:
+ Használt helymeghatározó eszköz:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Keres
+ KeresMake a full service discovery
@@ -163,23 +163,23 @@ Cancel to make a minimal device scan instead.
Connected to %1
- Csatlakoztatva ide %1
+ Csatlakoztatva ide %1Connect to %1
- Csatlakozás ide %1
+ Csatlakozás ide %1Connect to %1
- Csatlakozás ide %1
+ Csatlakozás ide %1Connecting to %1
- Csatlakozom ide %1
+ Csatlakozom ide %1Use orthometric altitude from device
- Ortometrikus magasság használata az eszközből
+ Ortometrikus magasság használata az eszközbőlSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancel to make a minimal device scan instead.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- Belső eszköz
+ Belső eszköz
@@ -233,31 +233,31 @@ Cancel to make a minimal device scan instead.
Could not find the remote host
- Nem tudok kapcsolódni a távoli géphez
+ Nem tudok kapcsolódni a távoli géphezCould not find the service UUID on remote host
- Nem találom a távoli gépen az UUID szolgáltatást
+ Nem találom a távoli gépen az UUID szolgáltatástAttempt to read or write from socket returned an error
- Az olvasási, vagy írási kísérlet a csatornán hibát jelez
+ Az olvasási, vagy írási kísérlet a csatornán hibát jelezThe protocol is not supported on this platform
- A protokoll nem támogatott ezen a platformon
+ A protokoll nem támogatott ezen a platformonAn operation was attempted while the socket was in a state that did not permit it
- A művelet végrehajtási kísérletét a csatorna állapota meghiúsította.
+ A művelet végrehajtási kísérletét a csatorna állapota meghiúsította.The remote host closed the connection
- A távoli gép bontotta a kapcsolatot
+ A távoli gép bontotta a kapcsolatotUnknown error
- Ismeretlen hiba
+ Ismeretlen hiba
@@ -287,19 +287,19 @@ Cancel to make a minimal device scan instead.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancel to make a minimal device scan instead.
Hours
- Óra
+ ÓraMinutes
- Perc
+ PercSeconds
- Másodperc
+ MásodpercOK
- OK
+ OK
@@ -616,7 +616,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- Legutolsó módosításokat eldobtam
+ Legutolsó módosításokat eldobtamSuccessfully duplicated feature
@@ -743,7 +743,7 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
Set feature as navigation
- Elemhez navigálás beállítása
+ Elemhez navigálás beállításaFeature has no geometry
@@ -815,15 +815,15 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Ugrás %1 %2 (térkép vetület)
+ Ugrás %1 %2 (térkép vetület)Set navigation point
- Állítsa be a navigációs pontot.
+ Állítsa be a navigációs pontot.Go to %1° %2° (WGS84)
- Ugrás %1° %2° (WGS84)
+ Ugrás %1° %2° (WGS84)Go to coordinate
@@ -912,7 +912,7 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
Reload data
- Adatok újra betöltése
+ Adatok újra betöltéseReload of layer %1 triggered
@@ -932,11 +932,11 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
Read-Only Layer
- Csak olvasható réteg
+ Csak olvasható rétegGeometry Locked Layer
- Zárolt geometriájú réteg
+ Zárolt geometriájú rétegThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1005,7 +1005,7 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
Cannot add new feature in layer "%1".
- Nem tudok új elemet hozzáadni "%1" réteghez.
+ Nem tudok új elemet hozzáadni "%1" réteghez.
@@ -1081,18 +1081,18 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
LocatorItemSearch…
- Keresés...
+ Keresés...LocatorSettingsSearch Settings
- Keresési beállítások
+ Keresési beállításokTrigger without its prefix
- Trigger prefix nélkül.
+ Trigger prefix nélkül.Search Bar Settings
@@ -1221,15 +1221,15 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
Printing atlas feature(s) to PDF
- Atlasz elem(ek) nyomtatása PDF fájlba folyamatban
+ Atlasz elem(ek) nyomtatása PDF fájlba folyamatbanAtlas feature(s) successfully printed to PDF and placed in your documents
- Atlasz elem(ek) nyomtatása PDF fájlba sikeres volt, a dokumentumok között található.
+ Atlasz elem(ek) nyomtatása PDF fájlba sikeres volt, a dokumentumok között található.Print Atlas Feature(s) to Image
- Atlasz elem(ek) nyomtatása képfájlba
+ Atlasz elem(ek) nyomtatása képfájlbaPrint Atlas Feature to Image
@@ -1252,7 +1252,7 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1260,11 +1260,11 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
Lon.
- Lon.
+ Lon.centroid
- centrális
+ centrálisLon
@@ -1329,7 +1329,7 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
Last changes discarded
- Legutolsó módosításokat eldobtam
+ Legutolsó módosításokat eldobtamConstraints not valid
@@ -1340,15 +1340,15 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
PlatformUtilitiesSelect Media File
- Válasszon média fájlt
+ Válasszon média fájltJPEG images (*.jpg *.jpeg)
- JPEG képek (*.jpg *.jpeg)
+ JPEG képek (*.jpg *.jpeg)Failed to save gallery picture
- Nem sikerült a képet a galériába menteni
+ Nem sikerült a képet a galériába menteniOpen File
@@ -1411,71 +1411,71 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- N/A
+ N/AX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Magasság
+ MagasságSpeed
- Sebesség
+ SebességH. Accuracy
- Hz. pontosság
+ Hz. pontosságV. Accuracy
- V. pontosság
+ V. pontosságPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Hibátlan
+ HibátlanFix
- Fix
+ FixQuality
- Minőség
+ Minőség
@@ -1675,7 +1675,7 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
QFieldCloudLoginFailed to login
- Sikertelen bejelentkezés
+ Sikertelen bejelentkezésFailed to sign in
@@ -1717,15 +1717,15 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
Logout
- Kijelentkezés
+ KijelentkezésLogging in, please wait
- Bejelentkezés, kérem várjon
+ Bejelentkezés, kérem várjonLogin
- Bejelentkezés
+ BejelentkezésThe easiest way to transfer you project from QGIS to your devices!
@@ -1740,11 +1740,11 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Problémás QField réteg becsomagolás
+ Problémás QField réteg becsomagolásSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Néhány réteget helytelenül csomagoltak be a QFieldCloud-on. Ezen a rétegek konfigurációja hibás lehet vagy az adatforrásai nem érhetők el a QFieldCloud szerverről.
+ Néhány réteget helytelenül csomagoltak be a QFieldCloud-on. Ezen a rétegek konfigurációja hibás lehet vagy az adatforrásai nem érhetők el a QFieldCloud szerverről.QFieldCloud had troubles packaging your project
@@ -1855,7 +1855,7 @@ Az elem geometriákat összevonjuk a '%1' elembe, mely megőrzi az att
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Minden módosított elem visszaállítása a helyi felhő rétegeken. Nem tudja visszaállítani azokat a módosításokat.
+ Minden módosított elem visszaállítása a helyi felhő rétegeken. Nem tudja visszaállítani azokat a módosításokat.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1901,7 +1901,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- %n melléklet(ek) feltöltése folyamatban van a háttérben.%n melléklet(ek) feltöltése folyamatban van a háttérben.
+ %n melléklet(ek) feltöltése folyamatban van a háttérben.%n melléklet(ek) feltöltése folyamatban van a háttérben.Should local changes be reverted?
@@ -1936,30 +1936,30 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Sikertelen export
+ Sikertelen exportPackaged layer '%1' is not valid: '%2'
- '%1' becsomagolt réteg hibás: '%2'
+ '%1' becsomagolt réteg hibás: '%2'Failed to open temporary file for "%1", reason:
%2
- Nem sikerült megnyitni a "%1" ideiglenes fájlt, ok:
+ Nem sikerült megnyitni a "%1" ideiglenes fájlt, ok:
%2Failed to upload attachment stored at "%1", reason:
%2
- Nem sikerült feltölteni a "%1" címen tárolt mellékletet, oka:%2
+ Nem sikerült feltölteni a "%1" címen tárolt mellékletet, oka:%2Failed to download file "%1", reason:
- Nem sikerült a "%1" fájlt letölteni, ok:
+ Nem sikerült a "%1" fájlt letölteni, ok:Failed to write downloaded file stored at "%1", fs reason:
- Nem sikerült az írás a letöltött fájlba, amely a következő helyen található: "%1", fs oka:
+ Nem sikerült az írás a letöltött fájlba, amely a következő helyen található: "%1", fs oka:aborted
@@ -2030,7 +2030,7 @@ name(string), owner(string), description(string), user_role(string), is_public(b
Failed to upload attachment stored at `%1`, reason:
%2
- Nem sikerült feltölteni a `%1` címen tárolt mellékletet, oka:%2
+ Nem sikerült feltölteni a `%1` címen tárolt mellékletet, oka:%2Network error. Failed to download file `%1`.
@@ -2315,7 +2315,7 @@ name(string), owner(string), description(string), user_role(string), is_public(b
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Ha engedélyezve van, a képernyő fényereje 20 másodperces inaktivitás után halványodik az akkumulátor kímélése érdekében.
+ Ha engedélyezve van, a képernyő fényereje 20 másodperces inaktivitás után halványodik az akkumulátor kímélése érdekében.Consider mouse as a touchscreen device
@@ -2371,36 +2371,36 @@ name(string), owner(string), description(string), user_role(string), is_public(b
Scanning for paired devices
- Párosított eszközök keresése
+ Párosított eszközök kereséseScanning failed: %1
- Sikertelem keresés: %1
+ Sikertelem keresés: %1Scanning done
- Keresést befejeztem
+ Keresést befejeztem%n device(s) found
- %n eszközt találtam%n eszközt találtam
+ %n eszközt találtam%n eszközt találtamScanning canceled
- Keresés megszakítva
+ Keresés megszakítvaScan
- Keres
+ KeresMake a full service discovery
- Teljes körű szolgáltatás felfedezés
+ Teljes körű szolgáltatás felfedezésA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Egy teljes keresés tovább tarthat.Valóban ezt akarja?
+ Egy teljes keresés tovább tarthat.Valóban ezt akarja?
Szakítsa meg a minimális eszközkereséshez.
@@ -2409,7 +2409,7 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Csatlakozás ide %1
+ Csatlakozás ide %1Connecting to %1
@@ -2469,7 +2469,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- A pozicionáló eszköz által rögzített Z értékek ezzel az értékkel korrigálásra kerülnek. Ha 1,6-os értéket adunk meg, akkor minden rögzített értéknél -1,6-os korrekciót eredményez.
+ A pozicionáló eszköz által rögzített Z értékek ezzel az értékkel korrigálásra kerülnek. Ha 1,6-os értéket adunk meg, akkor minden rögzített értéknél -1,6-os korrekciót eredményez.Skip altitude correction
@@ -2767,7 +2767,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- %1 betűkészlet betöltése
+ %1 betűkészlet betöltése
@@ -2828,7 +2828,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- A térképvászon forgatás nem támogatott. %1-ről visszaállítottam 0-ra.
+ A térképvászon forgatás nem támogatott. %1-ről visszaállítottam 0-ra.
@@ -2932,7 +2932,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- QField előkészítése, ezt egy egyszeri művelet, mely több időbe telhet
+ QField előkészítése, ezt egy egyszeri művelet, mely több időbe telhet
@@ -3039,11 +3039,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- Rögzítse, ha mindkét aktív korlátozás teljesül
+ Rögzítse, ha mindkét aktív korlátozás teljesülWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Ha engedélyezve van, a csúcsok csak akkor rögzíthetők, ha mindkét aktív korlátozás teljesül. Ha nincs engedélyezve, már egy korlátozás teljesítése csúcsösszeadást vált ki.
+ Ha engedélyezve van, a csúcsok csak akkor rögzíthetők, ha mindkét aktív korlátozás teljesül. Ha nincs engedélyezve, már egy korlátozás teljesítése csúcsösszeadást vált ki.Start tracking
@@ -3051,11 +3051,11 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- Üres értékekkel nem lehet elkezdeni a követést
+ Üres értékekkel nem lehet elkezdeni a követéstWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- Ha mindkét megszorítás le van tiltva, a töréspont hozzáadás olyan gyakran történik, ahogy az eszköz pozíciót küld.
+ Ha mindkét megszorítás le van tiltva, a töréspont hozzáadás olyan gyakran történik, ahogy az eszköz pozíciót küld.Measure (M) value attached to vertices:
@@ -3250,11 +3250,11 @@ Cancel to make a minimal device scan instead.
Base map project
- Alaptérkép projekt
+ Alaptérkép projektBase Map Project
- Alaptérkép projekt
+ Alaptérkép projektRemove from Recent Projects
@@ -3262,7 +3262,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Üdvözli a QField. Először használja ezt az alkalmazást? Próbálja ki az alábbi listában szreplő mintaprojekteket.
+ Üdvözli a QField. Először használja ezt az alkalmazást? Próbálja ki az alábbi listában szreplő mintaprojekteket.Welcome back to QField.
@@ -3432,11 +3432,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- A helymeghatározás bekapcsolva
+ A helymeghatározás bekapcsolvaPositioning turned off
- A helymeghatározás kikapcsolva
+ A helymeghatározás kikapcsolvaCanvas stopped following location
@@ -3464,7 +3464,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- Nyomtatás PDF-be
+ Nyomtatás PDF-beGo to Home Screen
@@ -3476,7 +3476,7 @@ Cancel to make a minimal device scan instead.
Open Project
- Projekt megnyitása
+ Projekt megnyitásaSettings
@@ -3492,7 +3492,7 @@ Cancel to make a minimal device scan instead.
Select template below
- Válasszon sablont lent
+ Válasszon sablont lentActivating positioning service
@@ -3516,7 +3516,7 @@ Cancel to make a minimal device scan instead.
Add Bookmark at Coordinates
- Könyvjelző hozzáadása a Koordinátákhoz
+ Könyvjelző hozzáadása a KoordinátákhozUntitled bookmark
@@ -3524,7 +3524,7 @@ Cancel to make a minimal device scan instead.
Set Coordinates as Destination
- Állítsa be a koordinátákat célként
+ Állítsa be a koordinátákat célkéntCopy Coordinates
@@ -3532,11 +3532,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3548,27 +3548,27 @@ Cancel to make a minimal device scan instead.
0.25m Precision
- 0.25m pontosság
+ 0.25m pontosság0.5m Precision
- 0.5m pontosság
+ 0.5m pontosság1m Precision
- 1m pontosság
+ 1m pontosság2.5m Precision
- 2.5m pontosság
+ 2.5m pontosság5m Precision
- 5m pontosság
+ 5m pontosság10m Precision
- 10m pontosság
+ 10m pontosságAlways Show Precise View
@@ -3596,7 +3596,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- Beállítás célként
+ Beállítás célkéntNavigation Options
@@ -3632,11 +3632,11 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- Aktuális pozíció középre
+ Aktuális pozíció középreAdd Bookmark at Current Location
- Könyvjelző hozzáadása az aktuális helyhez
+ Könyvjelző hozzáadása az aktuális helyhezCurrent location unknown
@@ -3648,7 +3648,7 @@ Cancel to make a minimal device scan instead.
Copy Current Location
- Jelenlegi hely másolása
+ Jelenlegi hely másolásaAccuracy
@@ -3676,7 +3676,7 @@ Cancel to make a minimal device scan instead.
Logged out
- Kijelentkezett
+ KijelentkezettConnecting...
@@ -3684,7 +3684,7 @@ Cancel to make a minimal device scan instead.
Logged in
- Bejelentkezett
+ BejelentkezettProject %1 failed to download
diff --git a/i18n/qfield_id.ts b/i18n/qfield_id.ts
index d5f68c2897..c89d7c63b1 100644
--- a/i18n/qfield_id.ts
+++ b/i18n/qfield_id.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Positioning device in use:
+ Positioning device in use:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Scan
+ ScanMake a full service discovery
@@ -163,23 +163,23 @@ Cancel to make a minimal device scan instead.
Connected to %1
- Connected to %1
+ Connected to %1Connect to %1
- Connect to %1
+ Connect to %1Connect to %1
- Connect to %1
+ Connect to %1Connecting to %1
- Connecting to %1
+ Connecting to %1Use orthometric altitude from device
- Use orthometric altitude from device
+ Use orthometric altitude from deviceSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancel to make a minimal device scan instead.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- Internal device
+ Internal device
@@ -287,19 +287,19 @@ Cancel to make a minimal device scan instead.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancel to make a minimal device scan instead.
Hours
- Hours
+ HoursMinutes
- Minutes
+ MinutesSeconds
- Seconds
+ SecondsOK
- OK
+ OK
@@ -616,7 +616,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- Last changes discarded
+ Last changes discardedSuccessfully duplicated feature
@@ -742,7 +742,7 @@ The features geometries will be combined into feature '%1', which will
Set feature as navigation
- Set feature as navigation
+ Set feature as navigationFeature has no geometry
@@ -814,15 +814,15 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Go to %1 %2 (Map CRS)
+ Go to %1 %2 (Map CRS)Set navigation point
- Set navigation point
+ Set navigation pointGo to %1° %2° (WGS84)
- Go to %1° %2° (WGS84)
+ Go to %1° %2° (WGS84)Go to coordinate
@@ -911,7 +911,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- Reload data
+ Reload dataReload of layer %1 triggered
@@ -931,11 +931,11 @@ The features geometries will be combined into feature '%1', which will
Read-Only Layer
- Read-Only Layer
+ Read-Only LayerGeometry Locked Layer
- Geometry Locked Layer
+ Geometry Locked LayerThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1004,7 +1004,7 @@ The features geometries will be combined into feature '%1', which will
Cannot add new feature in layer "%1".
- Cannot add new feature in layer "%1".
+ Cannot add new feature in layer "%1".
@@ -1080,18 +1080,18 @@ The features geometries will be combined into feature '%1', which will
LocatorItemSearch…
- Search…
+ Search…LocatorSettingsSearch Settings
- Search Settings
+ Search SettingsTrigger without its prefix
- Trigger without its prefix
+ Trigger without its prefixSearch Bar Settings
@@ -1220,11 +1220,11 @@ The features geometries will be combined into feature '%1', which will
Printing atlas feature(s) to PDF
- Printing atlas feature(s) to PDF
+ Printing atlas feature(s) to PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Atlas feature(s) successfully printed to PDF and placed in your documents
+ Atlas feature(s) successfully printed to PDF and placed in your documentsPrint Atlas Feature(s) to Image
@@ -1251,7 +1251,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1259,11 +1259,11 @@ The features geometries will be combined into feature '%1', which will
Lon.
- Lon.
+ Lon.centroid
- centroid
+ centroidLon
@@ -1328,7 +1328,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- Last changes discarded
+ Last changes discardedConstraints not valid
@@ -1339,15 +1339,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- Select Media File
+ Select Media FileJPEG images (*.jpg *.jpeg)
- JPEG images (*.jpg *.jpeg)
+ JPEG images (*.jpg *.jpeg)Failed to save gallery picture
- Failed to save gallery picture
+ Failed to save gallery pictureOpen File
@@ -1410,71 +1410,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- N/A
+ N/AX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Altitude
+ AltitudeSpeed
- Speed
+ SpeedH. Accuracy
- H. Accuracy
+ H. AccuracyV. Accuracy
- V. Accuracy
+ V. AccuracyPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Valid
+ ValidFix
- Fix
+ FixQuality
- Quality
+ Quality
@@ -1675,7 +1675,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- Failed to login
+ Failed to loginFailed to sign in
@@ -1717,15 +1717,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- Logout
+ LogoutLogging in, please wait
- Logging in, please wait
+ Logging in, please waitLogin
- Login
+ LoginThe easiest way to transfer you project from QGIS to your devices!
@@ -1740,11 +1740,11 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Problematic QFieldCloud layer packaging
+ Problematic QFieldCloud layer packagingSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
+ Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.QFieldCloud had troubles packaging your project
@@ -1855,7 +1855,7 @@ The features geometries will be combined into feature '%1', which will
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Revert all modified features in the local cloud layers. You cannot restore those changes.
+ Revert all modified features in the local cloud layers. You cannot restore those changes.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1903,7 +1903,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- %n attachment(s) are currently being uploaded in the background.
+ %n attachment(s) are currently being uploaded in the background.Should local changes be reverted?
@@ -1938,31 +1938,31 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Export failed
+ Export failedPackaged layer '%1' is not valid: '%2'
- Packaged layer '%1' is not valid: '%2'
+ Packaged layer '%1' is not valid: '%2'Failed to open temporary file for "%1", reason:
%2
- Failed to open temporary file for "%1", reason:
+ Failed to open temporary file for "%1", reason:
%2Failed to upload attachment stored at "%1", reason:
%2
- Failed to upload attachment stored at "%1", reason:
+ Failed to upload attachment stored at "%1", reason:
%2Failed to download file "%1", reason:
- Failed to download file "%1", reason:
+ Failed to download file "%1", reason:Failed to write downloaded file stored at "%1", fs reason:
- Failed to write downloaded file stored at "%1", fs reason:
+ Failed to write downloaded file stored at "%1", fs reason:aborted
@@ -2033,7 +2033,7 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to upload attachment stored at `%1`, reason:
%2
- Failed to upload attachment stored at `%1`, reason:
+ Failed to upload attachment stored at `%1`, reason:
%2
@@ -2319,7 +2319,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
+ If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.Consider mouse as a touchscreen device
@@ -2375,36 +2375,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Scanning for paired devices
+ Scanning for paired devicesScanning failed: %1
- Scanning failed: %1
+ Scanning failed: %1Scanning done
- Scanning done
+ Scanning done%n device(s) found
- %n device(s) found
+ %n device(s) foundScanning canceled
- Scanning canceled
+ Scanning canceledScan
- Scan
+ ScanMake a full service discovery
- Make a full service discovery
+ Make a full service discoveryA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- A full device scan can take longer. You really want to do it?
+ A full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
@@ -2413,7 +2413,7 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Connect to %1
+ Connect to %1Connecting to %1
@@ -2473,7 +2473,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
+ Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.Skip altitude correction
@@ -2771,7 +2771,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- Loading font %1
+ Loading font %1
@@ -2832,7 +2832,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Map Canvas rotation is not supported. Resetting from %1 to 0.
+ Map Canvas rotation is not supported. Resetting from %1 to 0.
@@ -2936,7 +2936,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Preparing QField, this is a one time operation that might take some time
+ Preparing QField, this is a one time operation that might take some time
@@ -3043,11 +3043,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- Record when both active constraints are met
+ Record when both active constraints are metWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- When enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
+ When enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.Start tracking
@@ -3055,7 +3055,7 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- Cannot start track with empty values
+ Cannot start track with empty valuesWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
@@ -3254,11 +3254,11 @@ Cancel to make a minimal device scan instead.
Base map project
- Base map project
+ Base map projectBase Map Project
- Base Map Project
+ Base Map ProjectRemove from Recent Projects
@@ -3266,7 +3266,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Welcome to QField. First time using this application? Try out sample projects listed in the list below.
+ Welcome to QField. First time using this application? Try out sample projects listed in the list below.Welcome back to QField.
@@ -3436,11 +3436,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- Positioning activated
+ Positioning activatedPositioning turned off
- Positioning turned off
+ Positioning turned offCanvas stopped following location
@@ -3468,7 +3468,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- Printing to PDF
+ Printing to PDFGo to Home Screen
@@ -3480,7 +3480,7 @@ Cancel to make a minimal device scan instead.
Open Project
- Open Project
+ Open ProjectSettings
@@ -3496,7 +3496,7 @@ Cancel to make a minimal device scan instead.
Select template below
- Select template below
+ Select template belowActivating positioning service
@@ -3520,7 +3520,7 @@ Cancel to make a minimal device scan instead.
Add Bookmark at Coordinates
- Add Bookmark at Coordinates
+ Add Bookmark at CoordinatesUntitled bookmark
@@ -3528,7 +3528,7 @@ Cancel to make a minimal device scan instead.
Set Coordinates as Destination
- Set Coordinates as Destination
+ Set Coordinates as DestinationCopy Coordinates
@@ -3536,11 +3536,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3552,27 +3552,27 @@ Cancel to make a minimal device scan instead.
0.25m Precision
- 0.25m Precision
+ 0.25m Precision0.5m Precision
- 0.5m Precision
+ 0.5m Precision1m Precision
- 1m Precision
+ 1m Precision2.5m Precision
- 2.5m Precision
+ 2.5m Precision5m Precision
- 5m Precision
+ 5m Precision10m Precision
- 10m Precision
+ 10m PrecisionAlways Show Precise View
@@ -3600,7 +3600,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- Set As Destination
+ Set As DestinationNavigation Options
@@ -3636,11 +3636,11 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- Center to Current Location
+ Center to Current LocationAdd Bookmark at Current Location
- Add Bookmark at Current Location
+ Add Bookmark at Current LocationCurrent location unknown
@@ -3652,7 +3652,7 @@ Cancel to make a minimal device scan instead.
Copy Current Location
- Copy Current Location
+ Copy Current LocationAccuracy
@@ -3680,7 +3680,7 @@ Cancel to make a minimal device scan instead.
Logged out
- Logged out
+ Logged outConnecting...
@@ -3688,7 +3688,7 @@ Cancel to make a minimal device scan instead.
Logged in
- Logged in
+ Logged inProject %1 failed to download
diff --git a/i18n/qfield_it.ts b/i18n/qfield_it.ts
index 0700d0d6c4..2d8c657d8e 100644
--- a/i18n/qfield_it.ts
+++ b/i18n/qfield_it.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Dispositivo di posizionamento in uso:
+ Dispositivo di posizionamento in uso:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Scansiona
+ ScansionaMake a full service discovery
@@ -163,23 +163,23 @@ Annullare per eseguire una scansione veloce del dispositivo.
Connected to %1
- Connesso a %1
+ Connesso a %1Connect to %1
- Connetti a %1
+ Connetti a %1Connect to %1
- Connetti a %1
+ Connetti a %1Connecting to %1
- Connessione a %1
+ Connessione a %1Use orthometric altitude from device
- Usare l'altezza ortometrica dal dispositivo
+ Usare l'altezza ortometrica dal dispositivoSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
N/A
- NA
+ NABluetooth device address:
@@ -210,7 +210,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
BluetoothDeviceModelInternal device
- Dispositivo interno
+ Dispositivo interno
@@ -233,31 +233,31 @@ Annullare per eseguire una scansione veloce del dispositivo.
Could not find the remote host
- Impossibile trovare l'host remoto
+ Impossibile trovare l'host remotoCould not find the service UUID on remote host
- Impossibile trovare il UUID del servizio sull'host remoto
+ Impossibile trovare il UUID del servizio sull'host remotoAttempt to read or write from socket returned an error
- Il tentativo di leggere o scrivere sul socket ha ritornato un errore
+ Il tentativo di leggere o scrivere sul socket ha ritornato un erroreThe protocol is not supported on this platform
- Il protocollo non è supportato su questa piattaforma
+ Il protocollo non è supportato su questa piattaformaAn operation was attempted while the socket was in a state that did not permit it
- È stata tentata un'operazione mentre il socket era in uno stato che non gli permetteva di eseguirla
+ È stata tentata un'operazione mentre il socket era in uno stato che non gli permetteva di eseguirlaThe remote host closed the connection
- L'host remoto ha chiuso la connessione
+ L'host remoto ha chiuso la connessioneUnknown error
- Errore sconosciuto
+ Errore sconosciuto
@@ -287,19 +287,19 @@ Annullare per eseguire una scansione veloce del dispositivo.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Annullare per eseguire una scansione veloce del dispositivo.
Hours
- Ore
+ OreMinutes
- Minuti
+ MinutiSeconds
- Secondi
+ SecondiOK
- Ok
+ Ok
@@ -616,7 +616,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Last changes discarded
- Ultimi cambiamenti scartati
+ Ultimi cambiamenti scartatiSuccessfully duplicated feature
@@ -746,7 +746,7 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
Set feature as navigation
- Imposta elemento come navigazione
+ Imposta elemento come navigazioneFeature has no geometry
@@ -818,15 +818,15 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Vai a %1 %2 (CRS della Mappa)
+ Vai a %1 %2 (CRS della Mappa)Set navigation point
- Imposta punto di navigazione
+ Imposta punto di navigazioneGo to %1° %2° (WGS84)
- Vai a %1° %2° (WGS84)
+ Vai a %1° %2° (WGS84)Go to coordinate
@@ -915,7 +915,7 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
Reload data
- Ricarica i dati
+ Ricarica i datiReload of layer %1 triggered
@@ -935,11 +935,11 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
Read-Only Layer
- Layer in sola lettura
+ Layer in sola letturaGeometry Locked Layer
- Layer a Geometria Bloccata
+ Layer a Geometria BloccataThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1008,7 +1008,7 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
Cannot add new feature in layer "%1".
- Impossibile aggiungere il nuovo elemento nel layer "%1".
+ Impossibile aggiungere il nuovo elemento nel layer "%1".
@@ -1084,18 +1084,18 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
LocatorItemSearch…
- Cerca...
+ Cerca...LocatorSettingsSearch Settings
- Impostazioni Ricerca
+ Impostazioni RicercaTrigger without its prefix
- Attiva senza il suo prefisso
+ Attiva senza il suo prefissoSearch Bar Settings
@@ -1224,15 +1224,15 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
Printing atlas feature(s) to PDF
- Stampa elementi Atlante in PDF
+ Stampa elementi Atlante in PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Elementi Atlante stampati correttamente in PDF e inseriti nei documenti
+ Elementi Atlante stampati correttamente in PDF e inseriti nei documentiPrint Atlas Feature(s) to Image
- Stampa Elementi Atlante come Immagine
+ Stampa Elementi Atlante come ImmaginePrint Atlas Feature to Image
@@ -1255,7 +1255,7 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1263,11 +1263,11 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
Lon.
- Lon.
+ Lon.centroid
- centroide
+ centroideLon
@@ -1332,7 +1332,7 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
Last changes discarded
- Ultimi cambiamenti scartati
+ Ultimi cambiamenti scartatiConstraints not valid
@@ -1343,15 +1343,15 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
PlatformUtilitiesSelect Media File
- Selezione un file Multimediale
+ Selezione un file MultimedialeJPEG images (*.jpg *.jpeg)
- Immagini JPEG (*.jpg *.jpeg)
+ Immagini JPEG (*.jpg *.jpeg)Failed to save gallery picture
- Fallito salvataggio dell'immagine nella galleria
+ Fallito salvataggio dell'immagine nella galleriaOpen File
@@ -1414,71 +1414,71 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- NA
+ NAX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Altitudine
+ AltitudineSpeed
- Velocità
+ VelocitàH. Accuracy
- Accuratezza O.
+ Accuratezza O.V. Accuracy
- Accuratezza V.
+ Accuratezza V.PDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Valido
+ ValidoFix
- Fissa
+ FissaQuality
- Qualità
+ Qualità
@@ -1508,7 +1508,7 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1679,7 +1679,7 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
QFieldCloudLoginFailed to login
- Accesso fallito
+ Accesso fallitoFailed to sign in
@@ -1721,15 +1721,15 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
Logout
- Disconnetti
+ DisconnettiLogging in, please wait
- Accesso in corso, attendere
+ Accesso in corso, attendereLogin
- Accedi
+ AccediThe easiest way to transfer you project from QGIS to your devices!
@@ -1744,11 +1744,11 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Problema di impacchettamento del layer di QFieldCloud
+ Problema di impacchettamento del layer di QFieldCloudSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Alcuni layer non sono stati impacchettati correttamente su QFieldCloud. Questi layer potrebbero essere mal configurati o la loro sorgente dati potrebbe non essere accessibile dal server di QFieldCloud
+ Alcuni layer non sono stati impacchettati correttamente su QFieldCloud. Questi layer potrebbero essere mal configurati o la loro sorgente dati potrebbe non essere accessibile dal server di QFieldCloudQFieldCloud had troubles packaging your project
@@ -1859,7 +1859,7 @@ Le geometrie degli elementi verranno combinati in un elemento '%1' che
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Ripristina tutti gli elementi modificati nei layer su cloud. Non è possibile ripristinare tali modifiche.
+ Ripristina tutti gli elementi modificati nei layer su cloud. Non è possibile ripristinare tali modifiche.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1907,7 +1907,7 @@ Anche se puoi ancora visualizzare e utilizzare questo progetto, è altamente rac
%n attachment(s) are currently being uploaded in the background.
- Caricamento in background di un allegato in corso.Caricamento in background di %n allegati in corso.Caricamento in background di %n allegati in corso.
+ Caricamento in background di un allegato in corso.Caricamento in background di %n allegati in corso.Caricamento in background di %n allegati in corso.Should local changes be reverted?
@@ -1942,32 +1942,32 @@ Anche se puoi ancora visualizzare e utilizzare questo progetto, è altamente rac
QFieldCloudProjectsModelExport failed
- Esportazione fallita
+ Esportazione fallitaPackaged layer '%1' is not valid: '%2'
- Il layer '%1' impacchettato non è valido: '%2'
+ Il layer '%1' impacchettato non è valido: '%2'Failed to open temporary file for "%1", reason:
%2
- Apertura del file temporaneo per "%1" fallita. Motivo:
+ Apertura del file temporaneo per "%1" fallita. Motivo:
%2Failed to upload attachment stored at "%1", reason:
%2
- Caricamento dell'allegato archiviato in "%1" fallito. Motivo:
+ Caricamento dell'allegato archiviato in "%1" fallito. Motivo:
%2Failed to download file "%1", reason:
- Scaricamento del file "%1" fallito. Motivo:
+ Scaricamento del file "%1" fallito. Motivo:
%2Failed to write downloaded file stored at "%1", fs reason:
- Scrittura del file scaricato archiviato in "%1" fallita. Motivo:
+ Scrittura del file scaricato archiviato in "%1" fallita. Motivo:
$2
@@ -2040,7 +2040,7 @@ Messaggio dell'errore: %4
Failed to upload attachment stored at `%1`, reason:
%2
- Impossibile caricare l'allegato archiviato in `%1`. Motivo:
+ Impossibile caricare l'allegato archiviato in `%1`. Motivo:
%2
@@ -2326,7 +2326,7 @@ Messaggio dell'errore: %4
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Se abilitato, la luminosità dello schermo sarà attenuata dopo 20 secondi di inattività per preservare la batteria.
+ Se abilitato, la luminosità dello schermo sarà attenuata dopo 20 secondi di inattività per preservare la batteria.Consider mouse as a touchscreen device
@@ -2382,36 +2382,36 @@ Messaggio dell'errore: %4
Scanning for paired devices
- Ricerca di dispositivi associati
+ Ricerca di dispositivi associatiScanning failed: %1
- Scansione fallita: %1
+ Scansione fallita: %1Scanning done
- Scansione completata
+ Scansione completata%n device(s) found
- %n dispositivi trovati%n dispositivi trovati%n dispositivi trovati
+ %n dispositivi trovati%n dispositivi trovati%n dispositivi trovatiScanning canceled
- Scansione annullata
+ Scansione annullataScan
- Scansiona
+ ScansionaMake a full service discovery
- Scopri il servizio completo
+ Scopri il servizio completoA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Una scansione completa del dispositivo può richiedere più tempo. Procedere davvero?
+ Una scansione completa del dispositivo può richiedere più tempo. Procedere davvero?
Annullare per eseguire una scansione veloce del dispositivo.
@@ -2420,7 +2420,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Connect to %1
- Connetti a %1
+ Connetti a %1Connecting to %1
@@ -2480,7 +2480,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- I valori Z registrati dal dispositivo di posizionamento verranno corretti di questo valore. Se viene inserito un valore di 1.6, ciò risulterà in una correzione di -1.6 per ogni valore registrato.
+ I valori Z registrati dal dispositivo di posizionamento verranno corretti di questo valore. Se viene inserito un valore di 1.6, ciò risulterà in una correzione di -1.6 per ogni valore registrato.Skip altitude correction
@@ -2778,7 +2778,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Loading font %1
- Caricando il font %1
+ Caricando il font %1
@@ -2839,7 +2839,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- La rotazione dalla mappa non é supportata. Reset da %1 a 0.
+ La rotazione dalla mappa non é supportata. Reset da %1 a 0.
@@ -2943,7 +2943,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Preparazione di QField, questa è un'operazione una tantum che potrebbe richiedere del tempo
+ Preparazione di QField, questa è un'operazione una tantum che potrebbe richiedere del tempo
@@ -3050,11 +3050,11 @@ Annullare per eseguire una scansione veloce del dispositivo.
Record when both active constraints are met
- Registra quando entrambi i vincoli attivi sono soddisfatti
+ Registra quando entrambi i vincoli attivi sono soddisfattiWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Se abilitato, i vertici saranno registrati solo quando vengono soddisfatti entrambi i vincoli attivi. Se l'impostazione è disabilitata, i singoli vincoli soddisfatti attiveranno un'aggiunta di vertice.
+ Se abilitato, i vertici saranno registrati solo quando vengono soddisfatti entrambi i vincoli attivi. Se l'impostazione è disabilitata, i singoli vincoli soddisfatti attiveranno un'aggiunta di vertice.Start tracking
@@ -3062,11 +3062,11 @@ Annullare per eseguire una scansione veloce del dispositivo.
Cannot start track with empty values
- Impossibile iniziare il tracking con valori vuoti
+ Impossibile iniziare il tracking con valori vuotiWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- Quando entrambi i vincoli sono disabilitati, le aggiunte di vertice si verificano con la stessa frequenza fornita dal dispositivo di posizionamento.
+ Quando entrambi i vincoli sono disabilitati, le aggiunte di vertice si verificano con la stessa frequenza fornita dal dispositivo di posizionamento.Measure (M) value attached to vertices:
@@ -3261,11 +3261,11 @@ Annullare per eseguire una scansione veloce del dispositivo.
Base map project
- Progetto di mappa base
+ Progetto di mappa baseBase Map Project
- Progetto di mappa base
+ Progetto di mappa baseRemove from Recent Projects
@@ -3273,7 +3273,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Benvenuto in QField. È la prima volta che usi questa applicazione? Prova i progetti di esempio elencati di seguito.
+ Benvenuto in QField. È la prima volta che usi questa applicazione? Prova i progetti di esempio elencati di seguito.Welcome back to QField.
@@ -3443,11 +3443,11 @@ Annullare per eseguire una scansione veloce del dispositivo.
Positioning activated
- Posizionamento attivato
+ Posizionamento attivatoPositioning turned off
- Posizionamento disattivato
+ Posizionamento disattivatoCanvas stopped following location
@@ -3475,7 +3475,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Printing to PDF
- Stampa PDF in corso
+ Stampa PDF in corsoGo to Home Screen
@@ -3487,7 +3487,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Open Project
- Apri progetto
+ Apri progettoSettings
@@ -3503,7 +3503,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Select template below
- Seleziona il modello sottostante
+ Seleziona il modello sottostanteActivating positioning service
@@ -3527,7 +3527,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Add Bookmark at Coordinates
- Aggiungi un Segnalibro alle Coordinate
+ Aggiungi un Segnalibro alle CoordinateUntitled bookmark
@@ -3535,7 +3535,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Set Coordinates as Destination
- Imposta le Coordinate come Destinazione
+ Imposta le Coordinate come DestinazioneCopy Coordinates
@@ -3543,11 +3543,11 @@ Annullare per eseguire una scansione veloce del dispositivo.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3559,27 +3559,27 @@ Annullare per eseguire una scansione veloce del dispositivo.
0.25m Precision
- Precisione 0.25m
+ Precisione 0.25m0.5m Precision
- Precisione 0.5m
+ Precisione 0.5m1m Precision
- Precisione 1m
+ Precisione 1m2.5m Precision
- Precisione 2.5m
+ Precisione 2.5m5m Precision
- Precision 5m
+ Precision 5m10m Precision
- Precisione 10m
+ Precisione 10mAlways Show Precise View
@@ -3607,7 +3607,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Set As Destination
- Imposta una Destinazione
+ Imposta una DestinazioneNavigation Options
@@ -3643,11 +3643,11 @@ Annullare per eseguire una scansione veloce del dispositivo.
Center to Current Location
- Centra sulla posizione attuale
+ Centra sulla posizione attualeAdd Bookmark at Current Location
- Aggiungi Segnalibro nella Posizione Attuale
+ Aggiungi Segnalibro nella Posizione AttualeCurrent location unknown
@@ -3659,7 +3659,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Copy Current Location
- Copia Posizione Corrente
+ Copia Posizione CorrenteAccuracy
@@ -3687,7 +3687,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Logged out
- Disconnesso
+ DisconnessoConnecting...
@@ -3695,7 +3695,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Logged in
- Accesso effettuato
+ Accesso effettuatoProject %1 failed to download
@@ -3719,7 +3719,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Positioning error: %1
- Errore di posizionamento: %1
+ Errore di posizionamento: %1Azimuth
@@ -3731,7 +3731,7 @@ Annullare per eseguire una scansione veloce del dispositivo.
Print to Image
- Stampa come Immagine
+ Stampa come ImmaginePrinting...
diff --git a/i18n/qfield_ja.ts b/i18n/qfield_ja.ts
index d6d5cba3cd..7a74ac6874 100644
--- a/i18n/qfield_ja.ts
+++ b/i18n/qfield_ja.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- 使用中の測位デバイス:
+ 使用中の測位デバイス:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- スキャン
+ スキャンMake a full service discovery
@@ -163,23 +163,23 @@ Cancel to make a minimal device scan instead.
Connected to %1
- %1 に接続しました
+ %1 に接続しましたConnect to %1
- %1に接続する
+ %1に接続するConnect to %1
- %1 に接続する
+ %1 に接続するConnecting to %1
- %1 に接続しています
+ %1 に接続していますUse orthometric altitude from device
- デバイスから取得したオルソメトリック高度を使う
+ デバイスから取得したオルソメトリック高度を使うSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancel to make a minimal device scan instead.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- 内蔵デバイス
+ 内蔵デバイス
@@ -233,31 +233,31 @@ Cancel to make a minimal device scan instead.
Could not find the remote host
- リモートホストが見つかりません
+ リモートホストが見つかりませんCould not find the service UUID on remote host
- リモートホストでサービスの UUID が見つかりませんでした。
+ リモートホストでサービスの UUID が見つかりませんでした。Attempt to read or write from socket returned an error
- ソケットから読み書きしようとするとエラーが返されました
+ ソケットから読み書きしようとするとエラーが返されましたThe protocol is not supported on this platform
- このプロトコルはこのプラットフォームではサポートされていません。
+ このプロトコルはこのプラットフォームではサポートされていません。An operation was attempted while the socket was in a state that did not permit it
- ソケットが許可されていない状態で操作が行われました
+ ソケットが許可されていない状態で操作が行われましたThe remote host closed the connection
- リモートホストが接続を閉じました
+ リモートホストが接続を閉じましたUnknown error
- 不明なエラー
+ 不明なエラー
@@ -287,19 +287,19 @@ Cancel to make a minimal device scan instead.
Lon
- 経度
+ 経度Lat
- 緯度
+ 緯度X
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancel to make a minimal device scan instead.
Hours
- 時間
+ 時間Minutes
- 分
+ 分Seconds
- 秒
+ 秒OK
- OK
+ OK
@@ -616,7 +616,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- 最後に行った変更は破棄されました
+ 最後に行った変更は破棄されましたSuccessfully duplicated feature
@@ -742,7 +742,7 @@ The features geometries will be combined into feature '%1', which will
Set feature as navigation
- 地物をナビゲーションに設定
+ 地物をナビゲーションに設定Feature has no geometry
@@ -814,15 +814,15 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- %1 %2 (地図のCRS)にいく
+ %1 %2 (地図のCRS)にいくSet navigation point
- ナビゲーションポイントを設定
+ ナビゲーションポイントを設定Go to %1° %2° (WGS84)
- %1° %2° (WGS84)にいく
+ %1° %2° (WGS84)にいくGo to coordinate
@@ -911,7 +911,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- データを再読み込み
+ データを再読み込みReload of layer %1 triggered
@@ -931,11 +931,11 @@ The features geometries will be combined into feature '%1', which will
Read-Only Layer
- 読み取り専用レイヤ
+ 読み取り専用レイヤGeometry Locked Layer
- ジオメトリロックされたレイヤ
+ ジオメトリロックされたレイヤThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1004,7 +1004,7 @@ The features geometries will be combined into feature '%1', which will
Cannot add new feature in layer "%1".
- レイヤ"%1"に新しい地物を追加できません。
+ レイヤ"%1"に新しい地物を追加できません。
@@ -1080,18 +1080,18 @@ The features geometries will be combined into feature '%1', which will
LocatorItemSearch…
- 検索しています…
+ 検索しています…LocatorSettingsSearch Settings
- 検索の設定
+ 検索の設定Trigger without its prefix
- 接頭辞のないトリガー
+ 接頭辞のないトリガーSearch Bar Settings
@@ -1220,15 +1220,15 @@ The features geometries will be combined into feature '%1', which will
Printing atlas feature(s) to PDF
- 地図帳の地物をPDFに印刷
+ 地図帳の地物をPDFに印刷Atlas feature(s) successfully printed to PDF and placed in your documents
- 地図帳の地物がPDFに印刷され、ドキュメントに保存されました。
+ 地図帳の地物がPDFに印刷され、ドキュメントに保存されました。Print Atlas Feature(s) to Image
- 地図帳の地物をPDFに印刷
+ 地図帳の地物をPDFに印刷Print Atlas Feature to Image
@@ -1251,7 +1251,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- 緯度
+ 緯度X
@@ -1259,11 +1259,11 @@ The features geometries will be combined into feature '%1', which will
Lon.
- 経度
+ 経度centroid
- 重心
+ 重心Lon
@@ -1328,7 +1328,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- 最後に行った変更は破棄されました
+ 最後に行った変更は破棄されましたConstraints not valid
@@ -1339,15 +1339,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- メディアファイルを選択
+ メディアファイルを選択JPEG images (*.jpg *.jpeg)
- JPEG 画像 (*.jpg *.jpeg)
+ JPEG 画像 (*.jpg *.jpeg)Failed to save gallery picture
- ギャラリー画像を保存できませんでした
+ ギャラリー画像を保存できませんでしたOpen File
@@ -1391,7 +1391,7 @@ The features geometries will be combined into feature '%1', which will
Audio files (*.mp3 *.aac *.ogg)
- 音声ファイル (*.mp3 *.aac *.ogg)
+ 音声ファイル (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1410,71 +1410,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- 緯度
+ 緯度N/A
- N/A
+ N/AX
- X
+ XLon.
- 経度
+ 経度Lon
- 経度
+ 経度Y
- Y
+ YLat
- 緯度
+ 緯度Altitude
- 高度
+ 高度Speed
- スピード
+ スピードH. Accuracy
- 水平方向の精度
+ 水平方向の精度V. Accuracy
- 垂直方向の精度
+ 垂直方向の精度PDOP
- PDOP(位置精度劣化度)
+ PDOP(位置精度劣化度)HDOP
- HDOP(水平精度劣化度)
+ HDOP(水平精度劣化度)VDOP
- VDOP(垂直精度劣化度)
+ VDOP(垂直精度劣化度)Valid
- 有効
+ 有効Fix
- 修正
+ 修正Quality
- 品質
+ 品質
@@ -1504,7 +1504,7 @@ The features geometries will be combined into feature '%1', which will
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1675,7 +1675,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- ログインできませんでした
+ ログインできませんでしたFailed to sign in
@@ -1717,15 +1717,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- ログアウト
+ ログアウトLogging in, please wait
- ログインしています、お待ちください
+ ログインしています、お待ちくださいLogin
- ログイン
+ ログインThe easiest way to transfer you project from QGIS to your devices!
@@ -1740,11 +1740,11 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- 問題のあるQFieldCloudレイヤーのパッケージング
+ 問題のあるQFieldCloudレイヤーのパッケージングSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- 一部のレイヤーはQFieldCloud上で正しくパッケージ化されていません。これらのレイヤーは、設定が間違っているか、データソースがQFieldCloudサーバーからアクセスできない可能性があります。
+ 一部のレイヤーはQFieldCloud上で正しくパッケージ化されていません。これらのレイヤーは、設定が間違っているか、データソースがQFieldCloudサーバーからアクセスできない可能性があります。QFieldCloud had troubles packaging your project
@@ -1855,7 +1855,7 @@ The features geometries will be combined into feature '%1', which will
Revert all modified features in the local cloud layers. You cannot restore those changes.
- ローカルのクラウドレイヤーの変更した地物をすべて元に戻します。それらの変更をリストアすることはできません。
+ ローカルのクラウドレイヤーの変更した地物をすべて元に戻します。それらの変更をリストアすることはできません。The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1903,7 +1903,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- %n 個の添付ファイルがバックグラウンドでアップロードされています。
+ %n 個の添付ファイルがバックグラウンドでアップロードされています。Should local changes be reverted?
@@ -1938,31 +1938,31 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- エクスポートに失敗しました
+ エクスポートに失敗しましたPackaged layer '%1' is not valid: '%2'
- パッケージされている '%1' は無効なレイヤです: '%2'
+ パッケージされている '%1' は無効なレイヤです: '%2'Failed to open temporary file for "%1", reason:
%2
- "%1" の一時ファイルを開くのに失敗しました。理由:
+ "%1" の一時ファイルを開くのに失敗しました。理由:
%2Failed to upload attachment stored at "%1", reason:
%2
- "%1" に保存されている添付ファイルのアップロードに失敗しました。理由:
+ "%1" に保存されている添付ファイルのアップロードに失敗しました。理由:
%2Failed to download file "%1", reason:
- "%1" ファイルのダウンロードに失敗しました。理由:
+ "%1" ファイルのダウンロードに失敗しました。理由:Failed to write downloaded file stored at "%1", fs reason:
- "%1" に保存されているダウンロードしたファイルの書き込みに失敗しました。理由:
+ "%1" に保存されているダウンロードしたファイルの書き込みに失敗しました。理由:aborted
@@ -2033,7 +2033,7 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to upload attachment stored at `%1`, reason:
%2
- %1` に保存されている添付ファイルのアップロードに失敗しました。理由:
+ %1` に保存されている添付ファイルのアップロードに失敗しました。理由:
%2
@@ -2319,7 +2319,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- この機能を有効にすると、バッテリーを節約するために、20秒間操作しないと画面の明るさが低下します。
+ この機能を有効にすると、バッテリーを節約するために、20秒間操作しないと画面の明るさが低下します。Consider mouse as a touchscreen device
@@ -2375,36 +2375,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- ペアリングされたデバイスをスキャンしています
+ ペアリングされたデバイスをスキャンしていますScanning failed: %1
- スキャンに失敗しました: %1
+ スキャンに失敗しました: %1Scanning done
- スキャン完了
+ スキャン完了%n device(s) found
- %n つのデバイスが見つかりました
+ %n つのデバイスが見つかりましたScanning canceled
- スキャンがキャンセルされました。
+ スキャンがキャンセルされました。Scan
- スキャン
+ スキャンMake a full service discovery
- フルサービス検出をする
+ フルサービス検出をするA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- デバイスのフルスキャンには時間がかかる場合があります。本当に実行しますか?
+ デバイスのフルスキャンには時間がかかる場合があります。本当に実行しますか?
キャンセルして代わりにミニマムなデバイススキャンを行います。
@@ -2413,7 +2413,7 @@ Cancel to make a minimal device scan instead.
Connect to %1
- %1 に接続する
+ %1 に接続するConnecting to %1
@@ -2473,7 +2473,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- GNSS受信機から取得したZ値はこの数値によって補正されます。もし1.6という数値が入力された場合、各レコードの値から-1.6m補正されたものが保持されます。
+ GNSS受信機から取得したZ値はこの数値によって補正されます。もし1.6という数値が入力された場合、各レコードの値から-1.6m補正されたものが保持されます。Skip altitude correction
@@ -2771,7 +2771,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- フォント %1 をロードしています
+ フォント %1 をロードしています
@@ -2832,7 +2832,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- マップキャンバスの回転はサポートされていません。 %1から0にリセットします。
+ マップキャンバスの回転はサポートされていません。 %1から0にリセットします。
@@ -2936,7 +2936,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- QFieldを順しています。これは一回限りの操作で少し時間がかかる場合があります。
+ QFieldを順しています。これは一回限りの操作で少し時間がかかる場合があります。
@@ -2978,7 +2978,7 @@ Cancel to make a minimal device scan instead.
The connection was refused by the remote hose
- リモートホストによって接続が拒否されました
+ リモートホストによって接続が拒否されましたUDP receiver error (%1)
@@ -3043,11 +3043,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- 両方の制約を満たした場合に記録する
+ 両方の制約を満たした場合に記録するWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- 有効にすると、両方の制約を満たしたときにのみ頂点が記録されます。この設定を無効にすると、個々の制約が満たされたときに頂点の追加が行われます。
+ 有効にすると、両方の制約を満たしたときにのみ頂点が記録されます。この設定を無効にすると、個々の制約が満たされたときに頂点の追加が行われます。Start tracking
@@ -3055,11 +3055,11 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- 値が未設定のため追跡を開始できません
+ 値が未設定のため追跡を開始できませんWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- 両方の制約を無効にした場合、頂点の追加は衛星受信機から配信される頻度と同じに行われます。
+ 両方の制約を無効にした場合、頂点の追加は衛星受信機から配信される頻度と同じに行われます。Measure (M) value attached to vertices:
@@ -3165,7 +3165,7 @@ Cancel to make a minimal device scan instead.
The connection was refused by the remote hose
- リモートホストによって接続が拒否されました
+ リモートホストによって接続が拒否されましたUDP receiver error (%1)
@@ -3254,11 +3254,11 @@ Cancel to make a minimal device scan instead.
Base map project
- ベースマッププロジェクト
+ ベースマッププロジェクトBase Map Project
- ベースマッププロジェクト
+ ベースマッププロジェクトRemove from Recent Projects
@@ -3266,7 +3266,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- QFieldにようこそ。初めてこのアプリをご使用になりますか?どうぞ下のリストにあるサンプルプロジェクトをお試しください。
+ QFieldにようこそ。初めてこのアプリをご使用になりますか?どうぞ下のリストにあるサンプルプロジェクトをお試しください。Welcome back to QField.
@@ -3436,11 +3436,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- 現在位置表示機能が有効になりました
+ 現在位置表示機能が有効になりましたPositioning turned off
- 現在位置表示機能が無効になりました
+ 現在位置表示機能が無効になりましたCanvas stopped following location
@@ -3468,7 +3468,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- PDFに印刷しています
+ PDFに印刷していますGo to Home Screen
@@ -3480,7 +3480,7 @@ Cancel to make a minimal device scan instead.
Open Project
- プロジェクトを開く
+ プロジェクトを開くSettings
@@ -3496,7 +3496,7 @@ Cancel to make a minimal device scan instead.
Select template below
- 下のテンプレートを選択
+ 下のテンプレートを選択Activating positioning service
@@ -3520,7 +3520,7 @@ Cancel to make a minimal device scan instead.
Add Bookmark at Coordinates
- 座標でブックマークを追加
+ 座標でブックマークを追加Untitled bookmark
@@ -3528,7 +3528,7 @@ Cancel to make a minimal device scan instead.
Set Coordinates as Destination
- 目的地として座標を設定
+ 目的地として座標を設定Copy Coordinates
@@ -3536,11 +3536,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3552,27 +3552,27 @@ Cancel to make a minimal device scan instead.
0.25m Precision
- 0.25m精度
+ 0.25m精度0.5m Precision
- 0.5m精度
+ 0.5m精度1m Precision
- 1m精度
+ 1m精度2.5m Precision
- 2.5m精度
+ 2.5m精度5m Precision
- 5m精度
+ 5m精度10m Precision
- 10m精度
+ 10m精度Always Show Precise View
@@ -3600,7 +3600,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- 目的地として設定
+ 目的地として設定Navigation Options
@@ -3636,11 +3636,11 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- 現在位置を中央に表示
+ 現在位置を中央に表示Add Bookmark at Current Location
- 現在位置でブックマークを追加
+ 現在位置でブックマークを追加Current location unknown
@@ -3652,7 +3652,7 @@ Cancel to make a minimal device scan instead.
Copy Current Location
- 現在位置をコピー
+ 現在位置をコピーAccuracy
@@ -3680,7 +3680,7 @@ Cancel to make a minimal device scan instead.
Logged out
- ログアウトしました
+ ログアウトしましたConnecting...
@@ -3688,7 +3688,7 @@ Cancel to make a minimal device scan instead.
Logged in
- ログインしました
+ ログインしましたProject %1 failed to download
@@ -3712,7 +3712,7 @@ Cancel to make a minimal device scan instead.
Positioning error: %1
- 測位エラー: %1
+ 測位エラー: %1Azimuth
@@ -3724,7 +3724,7 @@ Cancel to make a minimal device scan instead.
Print to Image
- 画像に印刷する
+ 画像に印刷するPrinting...
diff --git a/i18n/qfield_ka.ts b/i18n/qfield_ka.ts
index 6ca345b183..1cb3788568 100644
--- a/i18n/qfield_ka.ts
+++ b/i18n/qfield_ka.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- პოზიციონირების მოწყობილობა:
+ პოზიციონირების მოწყობილობა:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- სკანირება
+ სკანირებაMake a full service discovery
@@ -163,23 +163,23 @@ Cancel to make a minimal device scan instead.
Connected to %1
- დაკავშირებულია %1-სთან
+ დაკავშირებულია %1-სთანConnect to %1
- %1-თან დაკავშირება
+ %1-თან დაკავშირებაConnect to %1
- %1-თან დაკავშირება
+ %1-თან დაკავშირებაConnecting to %1
- ვუკავშირდები %1-ს
+ ვუკავშირდები %1-სUse orthometric altitude from device
- გამოიყენე ორთომეტრული სიმაღლე მოწყობილობიდან
+ გამოიყენე ორთომეტრული სიმაღლე მოწყობილობიდანSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancel to make a minimal device scan instead.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- შიდა მოწყობილობა
+ შიდა მოწყობილობა
@@ -233,11 +233,11 @@ Cancel to make a minimal device scan instead.
Could not find the remote host
- დაშორებული ჰოსტი ვერ ვიპოვე
+ დაშორებული ჰოსტი ვერ ვიპოვეCould not find the service UUID on remote host
- დაშორებულ ჰოსტზე ვერ ვიპოვე სერვისის UUID
+ დაშორებულ ჰოსტზე ვერ ვიპოვე სერვისის UUIDAttempt to read or write from socket returned an error
@@ -245,7 +245,7 @@ Cancel to make a minimal device scan instead.
The protocol is not supported on this platform
- ეს პროტოკოლი ამ პლათფორმაზე არ არის ხელმისაწვდომი
+ ეს პროტოკოლი ამ პლათფორმაზე არ არის ხელმისაწვდომიAn operation was attempted while the socket was in a state that did not permit it
@@ -253,11 +253,11 @@ Cancel to make a minimal device scan instead.
The remote host closed the connection
- დაშორებული ჰოსტმა დახურა კავშირი
+ დაშორებული ჰოსტმა დახურა კავშირიUnknown error
- უცნობი შეცდომა
+ უცნობი შეცდომა
@@ -287,19 +287,19 @@ Cancel to make a minimal device scan instead.
Lon
- გრძედი
+ გრძედიLat
- განედი
+ განედიX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancel to make a minimal device scan instead.
Hours
- საათი
+ საათიMinutes
- წუთი
+ წუთიSeconds
- წამი
+ წამიOK
- OK
+ OK
@@ -616,7 +616,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- ბოლო ცვლილებები უარყოფილი იქნა
+ ბოლო ცვლილებები უარყოფილი იქნაSuccessfully duplicated feature
@@ -908,7 +908,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- მონაცემების განახლება
+ მონაცემების განახლებაReload of layer %1 triggered
@@ -928,7 +928,7 @@ The features geometries will be combined into feature '%1', which will
Read-Only Layer
- ფენა არის მხოლოდ წაკითხვისათვის განკუთვნილი
+ ფენა არის მხოლოდ წაკითხვისათვის განკუთვნილიGeometry Locked Layer
@@ -1000,7 +1000,7 @@ The features geometries will be combined into feature '%1', which will
Cannot add new feature in layer "%1".
- ახალი ტოპოგრაფიული ელემენტის დამატების პრობლემა "%1" ფენაზე.
+ ახალი ტოპოგრაფიული ელემენტის დამატების პრობლემა "%1" ფენაზე.
@@ -1076,18 +1076,18 @@ The features geometries will be combined into feature '%1', which will
LocatorItemSearch…
- ძებნა...
+ ძებნა...LocatorSettingsSearch Settings
- ძებნის პარამეტრები
+ ძებნის პარამეტრებიTrigger without its prefix
- ტრიგერი პრეფიქსის გარეშე
+ ტრიგერი პრეფიქსის გარეშეSearch Bar Settings
@@ -1216,15 +1216,15 @@ The features geometries will be combined into feature '%1', which will
Printing atlas feature(s) to PDF
- იბეჭდება ატლასის ტოპოგრაფიული ელემენტ(ებ)ი PDF-ში
+ იბეჭდება ატლასის ტოპოგრაფიული ელემენტ(ებ)ი PDF-შიAtlas feature(s) successfully printed to PDF and placed in your documents
- ატლასის ტოპოგრაფიული ელემენტ(ებ)ი წარმატებით დაიბეჭდა PDF-ში და შეინახა თქვენს დოკუმენტებში
+ ატლასის ტოპოგრაფიული ელემენტ(ებ)ი წარმატებით დაიბეჭდა PDF-ში და შეინახა თქვენს დოკუმენტებშიPrint Atlas Feature(s) to Image
- ატლასის ტოპოგრაფიული ელემენტ(ებ)ის დაბეჭდვა სურათში
+ ატლასის ტოპოგრაფიული ელემენტ(ებ)ის დაბეჭდვა სურათშიPrint Atlas Feature to Image
@@ -1247,7 +1247,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- გან.
+ გან.X
@@ -1255,11 +1255,11 @@ The features geometries will be combined into feature '%1', which will
Lon.
- გრძ.
+ გრძ.centroid
- ცენტროიდი
+ ცენტროიდიLon
@@ -1324,7 +1324,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- ბოლო ცვლილებები უარყოფილი იქნა
+ ბოლო ცვლილებები უარყოფილი იქნაConstraints not valid
@@ -1335,11 +1335,11 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- აირჩიეთ მედია ფაილი
+ აირჩიეთ მედია ფაილიJPEG images (*.jpg *.jpeg)
- JPEG სურათები (*.jpg *.jpeg)
+ JPEG სურათები (*.jpg *.jpeg)Failed to save gallery picture
@@ -1387,7 +1387,7 @@ The features geometries will be combined into feature '%1', which will
Audio files (*.mp3 *.aac *.ogg)
- აუდიო ფაილები (*.mp3 *.aac *.ogg)
+ აუდიო ფაილები (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1406,59 +1406,59 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- გან.
+ გან.N/A
- N/A
+ N/AX
- X
+ XLon.
- გრძ.
+ გრძ.Lon
- გრძედი
+ გრძედიY
- Y
+ YLat
- განედი
+ განედიAltitude
- სიმაღლე (ზღვ. დონიდან)
+ სიმაღლე (ზღვ. დონიდან)Speed
- სიჩქარე
+ სიჩქარეH. Accuracy
- ჰორიზ. სიზუსტე
+ ჰორიზ. სიზუსტეV. Accuracy
- ვერტ. სიზუსტე
+ ვერტ. სიზუსტეPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
@@ -1466,11 +1466,11 @@ The features geometries will be combined into feature '%1', which will
Fix
- მოგვარება
+ მოგვარებაQuality
- ხარისხი
+ ხარისხი
@@ -1500,7 +1500,7 @@ The features geometries will be combined into feature '%1', which will
Bluetooth
- ბლუთუზი
+ ბლუთუზიBluetooth (NMEA)
@@ -1670,7 +1670,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- შესვლა ვერ განხორციელდა
+ შესვლა ვერ განხორციელდაFailed to sign in
@@ -1712,15 +1712,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- გასვლა
+ გასვლაLogging in, please wait
- მიმდინარეობს ავტორიზაცია, გთხოვთ მოითმინოთ
+ მიმდინარეობს ავტორიზაცია, გთხოვთ მოითმინოთLogin
- ავტორიზაცია
+ ავტორიზაციაThe easiest way to transfer you project from QGIS to your devices!
@@ -1850,7 +1850,7 @@ The features geometries will be combined into feature '%1', which will
Revert all modified features in the local cloud layers. You cannot restore those changes.
- ქლაუდიდან ჩამოტვირთულ ფენებზე ყველა ცვლილების უკან დაბრუნება. ამ შემთხვევაში ცვლილებები დაიკარგება.
+ ქლაუდიდან ჩამოტვირთულ ფენებზე ყველა ცვლილების უკან დაბრუნება. ამ შემთხვევაში ცვლილებები დაიკარგება.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1931,7 +1931,7 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- ექსპორტი შეწყდა
+ ექსპორტი შეწყდაPackaged layer '%1' is not valid: '%2'
@@ -1940,18 +1940,18 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to open temporary file for "%1", reason:
%2
- დროებითი ფაილის "%1" გახსნა ვერ მოხდა, მიზეზი:
+ დროებითი ფაილის "%1" გახსნა ვერ მოხდა, მიზეზი:
%2Failed to upload attachment stored at "%1", reason:
%2
- მიმაგრებული ფაილის ატვირთვა ვერ მოხდა "%1", მიზეზი:
+ მიმაგრებული ფაილის ატვირთვა ვერ მოხდა "%1", მიზეზი:
%2Failed to download file "%1", reason:
- ფაილი - "%1"-ის ჩამოტვირთვის პრობლემა, მიზეზი:
+ ფაილი - "%1"-ის ჩამოტვირთვის პრობლემა, მიზეზი:Failed to write downloaded file stored at "%1", fs reason:
@@ -2310,7 +2310,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- გააქტიურეთ თუ აკუმულატორის ეკონიმიის მიზნით გსურთ ეკრანის ნათება ჩაქრეს 20 წამის უმოქმედობის შემდეგ
+ გააქტიურეთ თუ აკუმულატორის ეკონიმიის მიზნით გსურთ ეკრანის ნათება ჩაქრეს 20 წამის უმოქმედობის შემდეგConsider mouse as a touchscreen device
@@ -2366,15 +2366,15 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- დაწყვილებული მოწყობილობების სკანირება
+ დაწყვილებული მოწყობილობების სკანირებაScanning failed: %1
- სკანირება ვერ შესრულდა: %1
+ სკანირება ვერ შესრულდა: %1Scanning done
- სკანირება დასრულდა
+ სკანირება დასრულდა%n device(s) found
@@ -2382,11 +2382,11 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning canceled
- სკანირება შეწყდა
+ სკანირება შეწყდაScan
- სკანირება
+ სკანირებაMake a full service discovery
@@ -2395,7 +2395,7 @@ While you can still view and use the project, it is strongly recommended to rese
A full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- მოწყობილობის სრული სკანირებას შესაძლოა დასჭირდეს დიდი დრო. დარწმუნებული ხართ გსურთ სკანირება?
+ მოწყობილობის სრული სკანირებას შესაძლოა დასჭირდეს დიდი დრო. დარწმუნებული ხართ გსურთ სკანირება?
შეწყვიტეთ თუ ამის სანაცვლოდ გირჩევნიათ შეასრულოთ მოწყობილობის მინიმალური სკანირება.
@@ -2404,7 +2404,7 @@ Cancel to make a minimal device scan instead.Connect to %1
- %1-სთან დაკავშირება
+ %1-სთან დაკავშირებაConnecting to %1
@@ -2762,7 +2762,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- იტვირთება შრიფტი %1
+ იტვირთება შრიფტი %1
@@ -2823,7 +2823,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- რუკის ფენის შებრუნება შეუძლებელია. %1-დან 0-ზე დაბრუნება.
+ რუკის ფენის შებრუნება შეუძლებელია. %1-დან 0-ზე დაბრუნება.
@@ -3427,11 +3427,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- პოზიციონირება გააქტიურებულია
+ პოზიციონირება გააქტიურებულიაPositioning turned off
- პოზიციონირება გამორთულია
+ პოზიციონირება გამორთულიაCanvas stopped following location
@@ -3459,7 +3459,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- იბეჭდება PDF-ში
+ იბეჭდება PDF-შიGo to Home Screen
@@ -3471,7 +3471,7 @@ Cancel to make a minimal device scan instead.
Open Project
- პროექტის გახსნა
+ პროექტის გახსნაSettings
@@ -3487,7 +3487,7 @@ Cancel to make a minimal device scan instead.
Select template below
- აირჩიეთ შაბლონი
+ აირჩიეთ შაბლონიActivating positioning service
@@ -3519,7 +3519,7 @@ Cancel to make a minimal device scan instead.
Set Coordinates as Destination
- კოორდინატის არჩება მიმართულებად
+ კოორდინატის არჩება მიმართულებადCopy Coordinates
@@ -3527,11 +3527,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3543,27 +3543,27 @@ Cancel to make a minimal device scan instead.
0.25m Precision
- 0.25მ სიზუსტე
+ 0.25მ სიზუსტე0.5m Precision
- 0.5მ სიზუსტე
+ 0.5მ სიზუსტე1m Precision
- 1მ სიზუსტე
+ 1მ სიზუსტე2.5m Precision
- 2.5მ სიზუსტე
+ 2.5მ სიზუსტე5m Precision
- 5მ სიზუსტე
+ 5მ სიზუსტე10m Precision
- 10მ სიზუსტე
+ 10მ სიზუსტეAlways Show Precise View
@@ -3591,7 +3591,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- მიმართულებად მონიშვნა
+ მიმართულებად მონიშვნაNavigation Options
@@ -3627,7 +3627,7 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- მიმდინარე ადგილმდებარეობაზე ცენტრირება
+ მიმდინარე ადგილმდებარეობაზე ცენტრირებაAdd Bookmark at Current Location
@@ -3643,7 +3643,7 @@ Cancel to make a minimal device scan instead.
Copy Current Location
- მიმდინარე ადგილმდებარეობის კოპირება
+ მიმდინარე ადგილმდებარეობის კოპირებაAccuracy
@@ -3679,7 +3679,7 @@ Cancel to make a minimal device scan instead.
Logged in
- შესული ბრძანდებით
+ შესული ბრძანდებითProject %1 failed to download
diff --git a/i18n/qfield_ko.ts b/i18n/qfield_ko.ts
index 4c60c26d2a..83e86577eb 100644
--- a/i18n/qfield_ko.ts
+++ b/i18n/qfield_ko.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Positioning device in use:
+ Positioning device in use:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Scan
+ ScanMake a full service discovery
@@ -163,7 +163,7 @@ Cancel to make a minimal device scan instead.
Connected to %1
- Connected to %1
+ Connected to %1Connect to %1
@@ -171,15 +171,15 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Connect to %1
+ Connect to %1Connecting to %1
- Connecting to %1
+ Connecting to %1Use orthometric altitude from device
- Use orthometric altitude from device
+ Use orthometric altitude from deviceSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancel to make a minimal device scan instead.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- Internal device
+ Internal device
@@ -287,19 +287,19 @@ Cancel to make a minimal device scan instead.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancel to make a minimal device scan instead.
Hours
- Hours
+ HoursMinutes
- Minutes
+ MinutesSeconds
- Seconds
+ SecondsOK
- 확인
+ 확인
@@ -616,7 +616,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- Last changes discarded
+ Last changes discardedSuccessfully duplicated feature
@@ -742,7 +742,7 @@ The features geometries will be combined into feature '%1', which will
Set feature as navigation
- Set feature as navigation
+ Set feature as navigationFeature has no geometry
@@ -814,15 +814,15 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Go to %1 %2 (Map CRS)
+ Go to %1 %2 (Map CRS)Set navigation point
- Set navigation point
+ Set navigation pointGo to %1° %2° (WGS84)
- Go to %1° %2° (WGS84)
+ Go to %1° %2° (WGS84)Go to coordinate
@@ -911,7 +911,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- Reload data
+ Reload dataReload of layer %1 triggered
@@ -931,11 +931,11 @@ The features geometries will be combined into feature '%1', which will
Read-Only Layer
- Read-Only Layer
+ Read-Only LayerGeometry Locked Layer
- Geometry Locked Layer
+ Geometry Locked LayerThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1004,7 +1004,7 @@ The features geometries will be combined into feature '%1', which will
Cannot add new feature in layer "%1".
- Cannot add new feature in layer "%1".
+ Cannot add new feature in layer "%1".
@@ -1080,18 +1080,18 @@ The features geometries will be combined into feature '%1', which will
LocatorItemSearch…
- Search…
+ Search…LocatorSettingsSearch Settings
- Search Settings
+ Search SettingsTrigger without its prefix
- Trigger without its prefix
+ Trigger without its prefixSearch Bar Settings
@@ -1220,11 +1220,11 @@ The features geometries will be combined into feature '%1', which will
Printing atlas feature(s) to PDF
- Printing atlas feature(s) to PDF
+ Printing atlas feature(s) to PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Atlas feature(s) successfully printed to PDF and placed in your documents
+ Atlas feature(s) successfully printed to PDF and placed in your documentsPrint Atlas Feature(s) to Image
@@ -1251,7 +1251,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1259,7 +1259,7 @@ The features geometries will be combined into feature '%1', which will
Lon.
- Lon.
+ Lon.centroid
@@ -1328,7 +1328,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- Last changes discarded
+ Last changes discardedConstraints not valid
@@ -1339,15 +1339,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- Select Media File
+ Select Media FileJPEG images (*.jpg *.jpeg)
- JPEG images (*.jpg *.jpeg)
+ JPEG images (*.jpg *.jpeg)Failed to save gallery picture
- Failed to save gallery picture
+ Failed to save gallery pictureOpen File
@@ -1410,71 +1410,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- N/A
+ N/AX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- 고도
+ 고도Speed
- 속도
+ 속도H. Accuracy
- H. Accuracy
+ H. AccuracyV. Accuracy
- V. Accuracy
+ V. AccuracyPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Valid
+ ValidFix
- Fix
+ FixQuality
- Quality
+ Quality
@@ -1675,7 +1675,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- Failed to login
+ Failed to loginFailed to sign in
@@ -1717,15 +1717,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- Logout
+ LogoutLogging in, please wait
- Logging in, please wait
+ Logging in, please waitLogin
- Login
+ LoginThe easiest way to transfer you project from QGIS to your devices!
@@ -1740,11 +1740,11 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Problematic QFieldCloud layer packaging
+ Problematic QFieldCloud layer packagingSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
+ Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.QFieldCloud had troubles packaging your project
@@ -1855,7 +1855,7 @@ The features geometries will be combined into feature '%1', which will
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Revert all modified features in the local cloud layers. You cannot restore those changes.
+ Revert all modified features in the local cloud layers. You cannot restore those changes.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1903,7 +1903,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- %n attachment(s) are currently being uploaded in the background.
+ %n attachment(s) are currently being uploaded in the background.Should local changes be reverted?
@@ -1938,31 +1938,31 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Export failed
+ Export failedPackaged layer '%1' is not valid: '%2'
- Packaged layer '%1' is not valid: '%2'
+ Packaged layer '%1' is not valid: '%2'Failed to open temporary file for "%1", reason:
%2
- Failed to open temporary file for "%1", reason:
+ Failed to open temporary file for "%1", reason:
%2Failed to upload attachment stored at "%1", reason:
%2
- Failed to upload attachment stored at "%1", reason:
+ Failed to upload attachment stored at "%1", reason:
%2Failed to download file "%1", reason:
- Failed to download file "%1", reason:
+ Failed to download file "%1", reason:Failed to write downloaded file stored at "%1", fs reason:
- Failed to write downloaded file stored at "%1", fs reason:
+ Failed to write downloaded file stored at "%1", fs reason:aborted
@@ -2033,7 +2033,7 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to upload attachment stored at `%1`, reason:
%2
- Failed to upload attachment stored at `%1`, reason:
+ Failed to upload attachment stored at `%1`, reason:
%2
@@ -2319,7 +2319,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
+ If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.Consider mouse as a touchscreen device
@@ -2375,36 +2375,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Scanning for paired devices
+ Scanning for paired devicesScanning failed: %1
- Scanning failed: %1
+ Scanning failed: %1Scanning done
- Scanning done
+ Scanning done%n device(s) found
- %n device(s) found
+ %n device(s) foundScanning canceled
- Scanning canceled
+ Scanning canceledScan
- Scan
+ ScanMake a full service discovery
- Make a full service discovery
+ Make a full service discoveryA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- A full device scan can take longer. You really want to do it?
+ A full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
@@ -2413,7 +2413,7 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Connect to %1
+ Connect to %1Connecting to %1
@@ -2473,7 +2473,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
+ Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.Skip altitude correction
@@ -2771,7 +2771,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- Loading font %1
+ Loading font %1
@@ -2832,7 +2832,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Map Canvas rotation is not supported. Resetting from %1 to 0.
+ Map Canvas rotation is not supported. Resetting from %1 to 0.
@@ -2936,7 +2936,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Preparing QField, this is a one time operation that might take some time
+ Preparing QField, this is a one time operation that might take some time
@@ -3043,11 +3043,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- Record when both active constraints are met
+ Record when both active constraints are metWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- When enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
+ When enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.Start tracking
@@ -3055,7 +3055,7 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- Cannot start track with empty values
+ Cannot start track with empty valuesWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
@@ -3254,11 +3254,11 @@ Cancel to make a minimal device scan instead.
Base map project
- Base map project
+ Base map projectBase Map Project
- Base Map Project
+ Base Map ProjectRemove from Recent Projects
@@ -3266,7 +3266,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Welcome to QField. First time using this application? Try out sample projects listed in the list below.
+ Welcome to QField. First time using this application? Try out sample projects listed in the list below.Welcome back to QField.
@@ -3436,11 +3436,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- 위치 서비스가 활성화 되었습니다
+ 위치 서비스가 활성화 되었습니다Positioning turned off
- 위치 서비스를 중지했습니다
+ 위치 서비스를 중지했습니다Canvas stopped following location
@@ -3468,7 +3468,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- Printing to PDF
+ Printing to PDFGo to Home Screen
@@ -3480,7 +3480,7 @@ Cancel to make a minimal device scan instead.
Open Project
- 프로젝트 열기
+ 프로젝트 열기Settings
@@ -3496,7 +3496,7 @@ Cancel to make a minimal device scan instead.
Select template below
- Select template below
+ Select template belowActivating positioning service
@@ -3536,11 +3536,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3600,7 +3600,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- Set As Destination
+ Set As DestinationNavigation Options
@@ -3636,7 +3636,7 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- Center to Current Location
+ Center to Current LocationAdd Bookmark at Current Location
@@ -3680,7 +3680,7 @@ Cancel to make a minimal device scan instead.
Logged out
- Logged out
+ Logged outConnecting...
@@ -3688,7 +3688,7 @@ Cancel to make a minimal device scan instead.
Logged in
- Logged in
+ Logged inProject %1 failed to download
diff --git a/i18n/qfield_nl.ts b/i18n/qfield_nl.ts
index 9c91468768..1f394546ee 100644
--- a/i18n/qfield_nl.ts
+++ b/i18n/qfield_nl.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Positionerings apparaat in gebruik:
+ Positionerings apparaat in gebruik:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Scan
+ ScanMake a full service discovery
@@ -163,23 +163,23 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Connected to %1
- Verbonden met %1
+ Verbonden met %1Connect to %1
- Verbind met %1
+ Verbind met %1Connect to %1
- Verbinden met %1
+ Verbinden met %1Connecting to %1
- Aan het verbinden met %1
+ Aan het verbinden met %1Use orthometric altitude from device
- Orthometrische hoogte van apparaat gebruiken
+ Orthometrische hoogte van apparaat gebruikenSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
N/A
- N/B
+ N/BBluetooth device address:
@@ -210,7 +210,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.BluetoothDeviceModel
Internal device
- Intern apparaat
+ Intern apparaat
@@ -233,7 +233,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Could not find the remote host
- Remote host niet gevonden
+ Remote host niet gevondenCould not find the service UUID on remote host
@@ -245,7 +245,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
The protocol is not supported on this platform
- Het protocol wordt op dit platform niet ondersteund
+ Het protocol wordt op dit platform niet ondersteundAn operation was attempted while the socket was in a state that did not permit it
@@ -257,7 +257,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Unknown error
- Onbekende fout
+ Onbekende fout
@@ -287,19 +287,19 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Hours
- Uren
+ UrenMinutes
- Minuten
+ MinutenSeconds
- Seconden
+ SecondenOK
- OK
+ OK
@@ -616,7 +616,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Last changes discarded
- Laatste wijzigingen genegeerd
+ Laatste wijzigingen genegeerdSuccessfully duplicated feature
@@ -744,7 +744,7 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
Set feature as navigation
- Object instellen als navigatie
+ Object instellen als navigatieFeature has no geometry
@@ -816,15 +816,15 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Ga naar %1 %2 (Kaart CRS)
+ Ga naar %1 %2 (Kaart CRS)Set navigation point
- Navigatiepunt instellen
+ Navigatiepunt instellenGo to %1° %2° (WGS84)
- Ga naar %1° %2° (WGS84)
+ Ga naar %1° %2° (WGS84)Go to coordinate
@@ -913,7 +913,7 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
Reload data
- Herladen data
+ Herladen dataReload of layer %1 triggered
@@ -933,11 +933,11 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
Read-Only Layer
- Alleen lezen Laag
+ Alleen lezen LaagGeometry Locked Layer
- Geometrie vergrendelde laag
+ Geometrie vergrendelde laagThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1006,7 +1006,7 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
Cannot add new feature in layer "%1".
- Kan geen nieuw object toevoegen aan laag "%1".
+ Kan geen nieuw object toevoegen aan laag "%1".
@@ -1082,14 +1082,14 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
LocatorItemSearch…
- Zoek...
+ Zoek...LocatorSettingsSearch Settings
- Zoek instellingen
+ Zoek instellingenTrigger without its prefix
@@ -1222,11 +1222,11 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
Printing atlas feature(s) to PDF
- Atlas-object(en) printen naar PDF
+ Atlas-object(en) printen naar PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Atlas-object(en) succesvol geprint naar PDF en in uw documenten geplaatst
+ Atlas-object(en) succesvol geprint naar PDF en in uw documenten geplaatstPrint Atlas Feature(s) to Image
@@ -1253,7 +1253,7 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1261,11 +1261,11 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
Lon.
- Lon.
+ Lon.centroid
- centroïde
+ centroïdeLon
@@ -1330,7 +1330,7 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
Last changes discarded
- Laatste wijzigingen genegeerd
+ Laatste wijzigingen genegeerdConstraints not valid
@@ -1341,15 +1341,15 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
PlatformUtilitiesSelect Media File
- Selecteer mediabestand
+ Selecteer mediabestandJPEG images (*.jpg *.jpeg)
- JPEG afbeeldingen (*.jpg *.jpeg)
+ JPEG afbeeldingen (*.jpg *.jpeg)Failed to save gallery picture
- Kan galerijafbeelding niet opslaan
+ Kan galerijafbeelding niet opslaanOpen File
@@ -1393,7 +1393,7 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
Audio files (*.mp3 *.aac *.ogg)
- Geluidsbestanden (*.mp3 *.aac *.ogg)
+ Geluidsbestanden (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1412,71 +1412,71 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- N/B
+ N/BX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Hoogte
+ HoogteSpeed
- Snelheid
+ SnelheidH. Accuracy
- H. Nauwkeurigheid
+ H. NauwkeurigheidV. Accuracy
- V. Nauwkeurigheid
+ V. NauwkeurigheidPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Geldig
+ GeldigFix
- Vast
+ VastQuality
- Kwaliteit
+ Kwaliteit
@@ -1506,7 +1506,7 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1677,7 +1677,7 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
QFieldCloudLoginFailed to login
- Inloggen mislukt
+ Inloggen misluktFailed to sign in
@@ -1719,15 +1719,15 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
Logout
- Uitloggen
+ UitloggenLogging in, please wait
- Inloggen, even geduld a.u.b.
+ Inloggen, even geduld a.u.b.Login
- Log in
+ Log inThe easiest way to transfer you project from QGIS to your devices!
@@ -1742,11 +1742,11 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Problematische inpakken van QFieldCloud-laag
+ Problematische inpakken van QFieldCloud-laagSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Sommige lagen zijn niet correct ingepakt op QFieldCloud. Deze lagen kunnen verkeerd zijn geconfigureerd of hun gegevensbron is niet toegankelijk vanaf de QFieldCloud-server.
+ Sommige lagen zijn niet correct ingepakt op QFieldCloud. Deze lagen kunnen verkeerd zijn geconfigureerd of hun gegevensbron is niet toegankelijk vanaf de QFieldCloud-server.QFieldCloud had troubles packaging your project
@@ -1857,7 +1857,7 @@ De geometrieën van objecten zullen worden gecombineerd tot object '%1&apos
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Zet alle gewijzigde objecten in de lokale cloudlagen terug. U kunt die wijzigingen niet herstellen.
+ Zet alle gewijzigde objecten in de lokale cloudlagen terug. U kunt die wijzigingen niet herstellen.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1905,7 +1905,7 @@ Hoewel u het project nog steeds kunt bekijken en gebruiken, wordt het ten zeerst
%n attachment(s) are currently being uploaded in the background.
- %n bijlage(n) worden momenteel op de achtergrond geüpload.%n bijlage(n) worden momenteel op de achtergrond geüpload.
+ %n bijlage(n) worden momenteel op de achtergrond geüpload.%n bijlage(n) worden momenteel op de achtergrond geüpload.Should local changes be reverted?
@@ -1940,7 +1940,7 @@ Hoewel u het project nog steeds kunt bekijken en gebruiken, wordt het ten zeerst
QFieldCloudProjectsModelExport failed
- Export mislukt
+ Export misluktPackaged layer '%1' is not valid: '%2'
@@ -1949,22 +1949,22 @@ Hoewel u het project nog steeds kunt bekijken en gebruiken, wordt het ten zeerst
Failed to open temporary file for "%1", reason:
%2
- Kan tijdelijk bestand voor "%1" niet openen, reden:
+ Kan tijdelijk bestand voor "%1" niet openen, reden:
%2Failed to upload attachment stored at "%1", reason:
%2
- Kan bijlage niet uploaden die is opgeslagen op "%1", reden:
+ Kan bijlage niet uploaden die is opgeslagen op "%1", reden:
%2Failed to download file "%1", reason:
- Kan bestand "%1" niet downloaden, reden:
+ Kan bestand "%1" niet downloaden, reden:Failed to write downloaded file stored at "%1", fs reason:
- Kan gedownloade bestand opgeslagen op "%1" niet schrijven, fs reden:
+ Kan gedownloade bestand opgeslagen op "%1" niet schrijven, fs reden:aborted
@@ -2035,7 +2035,7 @@ Hoewel u het project nog steeds kunt bekijken en gebruiken, wordt het ten zeerst
Failed to upload attachment stored at `%1`, reason:
%2
- Kan bijlage niet uploaden die is opgeslagen op '%1', reden:
+ Kan bijlage niet uploaden die is opgeslagen op '%1', reden:
%2
@@ -2321,7 +2321,7 @@ Hoewel u het project nog steeds kunt bekijken en gebruiken, wordt het ten zeerst
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Indien ingeschakeld, wordt de helderheid van het scherm gedimd na 20 seconden inactiviteit om de batterij te sparen.
+ Indien ingeschakeld, wordt de helderheid van het scherm gedimd na 20 seconden inactiviteit om de batterij te sparen.Consider mouse as a touchscreen device
@@ -2377,36 +2377,36 @@ Hoewel u het project nog steeds kunt bekijken en gebruiken, wordt het ten zeerst
Scanning for paired devices
- Scannen naar gekoppelde apparaten
+ Scannen naar gekoppelde apparatenScanning failed: %1
- Scannen mislukt: %1
+ Scannen mislukt: %1Scanning done
- Scannen gereed
+ Scannen gereed%n device(s) found
- %n apparaat(en) gevonden%n apparaat(en) gevonden
+ %n apparaat(en) gevonden%n apparaat(en) gevondenScanning canceled
- Scannen geannuleerd
+ Scannen geannuleerdScan
- Scan
+ ScanMake a full service discovery
- Maak een full-service ontdekking
+ Maak een full-service ontdekkingA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Een volledige apparaatscan kan langer duren. Wil je het echt doen?
+ Een volledige apparaatscan kan langer duren. Wil je het echt doen?
Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
@@ -2415,7 +2415,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Connect to %1
- Verbinden met %1
+ Verbinden met %1Connecting to %1
@@ -2475,7 +2475,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Z-waarden die vanaf het GPS-apparaat worden geregistreerd, worden met deze waarde gecorrigeerd. Als een waarde van 1,6 wordt ingevoerd, resulteert dit in een correctie van -1,6 voor elke geregistreerde waarde.
+ Z-waarden die vanaf het GPS-apparaat worden geregistreerd, worden met deze waarde gecorrigeerd. Als een waarde van 1,6 wordt ingevoerd, resulteert dit in een correctie van -1,6 voor elke geregistreerde waarde.Skip altitude correction
@@ -2773,7 +2773,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Loading font %1
- Lettertype %1 laden
+ Lettertype %1 laden
@@ -2834,7 +2834,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.QgsQuickMapSettings
Map Canvas rotation is not supported. Resetting from %1 to 0.
- Rotatie van kaartcanvas wordt niet ondersteund. Resetten van %1 naar 0.
+ Rotatie van kaartcanvas wordt niet ondersteund. Resetten van %1 naar 0.
@@ -2938,7 +2938,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.SystemLoader
Preparing QField, this is a one time operation that might take some time
- QField voorbereiden, dit is een eenmalige operatie die enige tijd kan duren
+ QField voorbereiden, dit is een eenmalige operatie die enige tijd kan duren
@@ -3045,11 +3045,11 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Record when both active constraints are met
- Opnemen wanneer aan beide actieve beperkingen is voldaan
+ Opnemen wanneer aan beide actieve beperkingen is voldaanWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Indien ingeschakeld, worden knooppunten alleen geregistreerd als aan beide actieve beperkingen is voldaan. Als de instelling is uitgeschakeld, zullen individuele beperkingen waaraan wordt voldaan een knooppunt-toevoeging activeren.
+ Indien ingeschakeld, worden knooppunten alleen geregistreerd als aan beide actieve beperkingen is voldaan. Als de instelling is uitgeschakeld, zullen individuele beperkingen waaraan wordt voldaan een knooppunt-toevoeging activeren.Start tracking
@@ -3256,11 +3256,11 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Base map project
- Basiskaart project
+ Basiskaart projectBase Map Project
- Basiskaart project
+ Basiskaart projectRemove from Recent Projects
@@ -3268,7 +3268,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Welkom bij QField. Gebruik je deze applicatie voor het eerst? Probeer voorbeeldprojecten uit die in de onderstaande lijst staan.
+ Welkom bij QField. Gebruik je deze applicatie voor het eerst? Probeer voorbeeldprojecten uit die in de onderstaande lijst staan.Welcome back to QField.
@@ -3438,11 +3438,11 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Positioning activated
- Positionering geactiveerd
+ Positionering geactiveerdPositioning turned off
- Positionering uit
+ Positionering uitCanvas stopped following location
@@ -3470,7 +3470,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Printing to PDF
- Afdrukken naar PDF
+ Afdrukken naar PDFGo to Home Screen
@@ -3482,7 +3482,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Open Project
- Open project
+ Open projectSettings
@@ -3498,7 +3498,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Select template below
- Selecteer hieronder een sjabloon
+ Selecteer hieronder een sjabloonActivating positioning service
@@ -3522,7 +3522,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Add Bookmark at Coordinates
- Bladwijzer toevoegen bij Coördinaten
+ Bladwijzer toevoegen bij CoördinatenUntitled bookmark
@@ -3530,7 +3530,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Set Coordinates as Destination
- Coördinaten instellen als bestemming
+ Coördinaten instellen als bestemmingCopy Coordinates
@@ -3538,11 +3538,11 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3554,27 +3554,27 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
0.25m Precision
- 0.25m Precisie
+ 0.25m Precisie0.5m Precision
- 0.5m Precisie
+ 0.5m Precisie1m Precision
- 1m Precisie
+ 1m Precisie2.5m Precision
- 2.5m Precisie
+ 2.5m Precisie5m Precision
- 5m Precisie
+ 5m Precisie10m Precision
- 10m Precisie
+ 10m PrecisieAlways Show Precise View
@@ -3602,7 +3602,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Set As Destination
- Instellen als bestemming
+ Instellen als bestemmingNavigation Options
@@ -3638,11 +3638,11 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Center to Current Location
- Centreren op Huidige Locatie
+ Centreren op Huidige LocatieAdd Bookmark at Current Location
- Bladwijzer toevoegen op huidige locatie
+ Bladwijzer toevoegen op huidige locatieCurrent location unknown
@@ -3654,7 +3654,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Copy Current Location
- Kopieer huidige locatie
+ Kopieer huidige locatieAccuracy
@@ -3682,7 +3682,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Logged out
- Uitgelogd
+ UitgelogdConnecting...
@@ -3690,7 +3690,7 @@ Annuleer om in plaats daarvan een minimale apparaatscan uit te voeren.
Logged in
- Ingelogd
+ IngelogdProject %1 failed to download
diff --git a/i18n/qfield_pl.ts b/i18n/qfield_pl.ts
index 0c1ed78c9b..772a9ed4fa 100644
--- a/i18n/qfield_pl.ts
+++ b/i18n/qfield_pl.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Używane urządzenie lokalizacji:
+ Używane urządzenie lokalizacji:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Skanuj
+ SkanujMake a full service discovery
@@ -163,23 +163,23 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Connected to %1
- Połączono z %1
+ Połączono z %1Connect to %1
- Połącz z %1
+ Połącz z %1Connect to %1
- Połącz z %1
+ Połącz z %1Connecting to %1
- Łączenie z %1
+ Łączenie z %1Use orthometric altitude from device
- Użyj wysokości ortometrycznej z urządzenia
+ Użyj wysokości ortometrycznej z urządzeniaSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
N/A
- Niedostępne
+ NiedostępneBluetooth device address:
@@ -210,7 +210,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
BluetoothDeviceModelInternal device
- Urządzenie wbudowane
+ Urządzenie wbudowane
@@ -233,31 +233,31 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Could not find the remote host
- Nie można odnaleźć zdalnego serwera
+ Nie można odnaleźć zdalnego serweraCould not find the service UUID on remote host
- Nie można znaleźć UUID usługi na zdalnym serwerze
+ Nie można znaleźć UUID usługi na zdalnym serwerzeAttempt to read or write from socket returned an error
- Błąd podczas próby odczytu lub zapisu do gniazda
+ Błąd podczas próby odczytu lub zapisu do gniazdaThe protocol is not supported on this platform
- Ten protokół nie jest wspierany na tej platformie
+ Ten protokół nie jest wspierany na tej platformieAn operation was attempted while the socket was in a state that did not permit it
- Próba wykonania operacji, podczas gdy gniazdo było w stanie, który na to nie zezwalał
+ Próba wykonania operacji, podczas gdy gniazdo było w stanie, który na to nie zezwalałThe remote host closed the connection
- Zdalny serwer zakończył połączenie
+ Zdalny serwer zakończył połączenieUnknown error
- Nieznany błąd
+ Nieznany błąd
@@ -287,19 +287,19 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Lon
- Dłu
+ DłuLat
- Szer
+ SzerX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Hours
- Godzin
+ GodzinMinutes
- Minut
+ MinutSeconds
- Sekund
+ SekundOK
- OK
+ OK
@@ -616,7 +616,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Last changes discarded
- Odrzucono ostatnie zmiany
+ Odrzucono ostatnie zmianySuccessfully duplicated feature
@@ -739,7 +739,7 @@ The features geometries will be combined into feature '%1', which will
Set feature as navigation
- Ustaw obiekt jako nawigację
+ Ustaw obiekt jako nawigacjęFeature has no geometry
@@ -811,15 +811,15 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Idź do %1 %2 (CRS mapy)
+ Idź do %1 %2 (CRS mapy)Set navigation point
- Ustaw punkt nawigacji
+ Ustaw punkt nawigacjiGo to %1° %2° (WGS84)
- Idź do %1° %2° (WGS84)
+ Idź do %1° %2° (WGS84)Go to coordinate
@@ -908,7 +908,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- Wczytaj ponownie dane
+ Wczytaj ponownie daneReload of layer %1 triggered
@@ -928,11 +928,11 @@ The features geometries will be combined into feature '%1', which will
Read-Only Layer
- Warstwa tylko do odczytu
+ Warstwa tylko do odczytuGeometry Locked Layer
- Warstwa z zablokowaną geometrią
+ Warstwa z zablokowaną geometriąThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1001,7 +1001,7 @@ The features geometries will be combined into feature '%1', which will
Cannot add new feature in layer "%1".
- Nie można dodać nowego obiektu na warstwie "%1".
+ Nie można dodać nowego obiektu na warstwie "%1".
@@ -1077,14 +1077,14 @@ The features geometries will be combined into feature '%1', which will
LocatorItemSearch…
- Szukaj...
+ Szukaj...LocatorSettingsSearch Settings
- Ustawienia wyszukiwania
+ Ustawienia wyszukiwaniaTrigger without its prefix
@@ -1221,7 +1221,7 @@ The features geometries will be combined into feature '%1', which will
Atlas feature(s) successfully printed to PDF and placed in your documents
- Element(y) atlasu zostały pomyślnie wydrukowane do pliku PDF i umieszczone w dokumentach.
+ Element(y) atlasu zostały pomyślnie wydrukowane do pliku PDF i umieszczone w dokumentach.Print Atlas Feature(s) to Image
@@ -1248,7 +1248,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- Szer.
+ Szer.X
@@ -1256,11 +1256,11 @@ The features geometries will be combined into feature '%1', which will
Lon.
- Dł.
+ Dł.centroid
- centroid
+ centroidLon
@@ -1325,7 +1325,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- Odrzucono ostatnie zmiany
+ Odrzucono ostatnie zmianyConstraints not valid
@@ -1336,15 +1336,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- Wybierz plik
+ Wybierz plikJPEG images (*.jpg *.jpeg)
- Obrazy JPEG (*.jpg *.jpeg)
+ Obrazy JPEG (*.jpg *.jpeg)Failed to save gallery picture
- Nie można zapisać obrazu
+ Nie można zapisać obrazuOpen File
@@ -1388,7 +1388,7 @@ The features geometries will be combined into feature '%1', which will
Audio files (*.mp3 *.aac *.ogg)
- Pliki dźwiękowe (*.mp3 *.aac *.ogg)
+ Pliki dźwiękowe (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1407,71 +1407,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- Szer.
+ Szer.N/A
- Niedostępne
+ NiedostępneX
- X
+ XLon.
- Dł.
+ Dł.Lon
- Dłu
+ DłuY
- Y
+ YLat
- Szer
+ SzerAltitude
- Wysokość
+ WysokośćSpeed
- Prędkość
+ PrędkośćH. Accuracy
- Dokł. pion.
+ Dokł. pion.V. Accuracy
- Dokł. poz.
+ Dokł. poz.PDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Prawidłowy
+ PrawidłowyFix
- Poprawka
+ PoprawkaQuality
- Jakość
+ Jakość
@@ -1501,7 +1501,7 @@ The features geometries will be combined into feature '%1', which will
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1672,7 +1672,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- Nie udało się zalogować
+ Nie udało się zalogowaćFailed to sign in
@@ -1714,15 +1714,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- Wyloguj się
+ Wyloguj sięLogging in, please wait
- Logowanie, proszę czekać
+ Logowanie, proszę czekaćLogin
- Logowanie
+ LogowanieThe easiest way to transfer you project from QGIS to your devices!
@@ -1737,11 +1737,11 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Problematyczne spakowanie warstw QFieldCloud
+ Problematyczne spakowanie warstw QFieldCloudSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Niektóre warstwy nie zostały poprawnie spakowane w QFieldCloud. Warstwy te mogą być niepoprawnie skonfigurowane lub ich źródła danych są niedostępne na serwerze QFieldCloud.
+ Niektóre warstwy nie zostały poprawnie spakowane w QFieldCloud. Warstwy te mogą być niepoprawnie skonfigurowane lub ich źródła danych są niedostępne na serwerze QFieldCloud.QFieldCloud had troubles packaging your project
@@ -1852,7 +1852,7 @@ The features geometries will be combined into feature '%1', which will
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Odwrócenie zmian we wszystkich zmodyfikowanych elementach na warstwach lokalnych w chmurze. Nie będzie można przywrócić tych zmian.
+ Odwrócenie zmian we wszystkich zmodyfikowanych elementach na warstwach lokalnych w chmurze. Nie będzie można przywrócić tych zmian.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1935,31 +1935,31 @@ Chociaż nadal możesz wyświetlać i używać projektu, zdecydowanie zaleca si
QFieldCloudProjectsModelExport failed
- Eksport nie powiódł się.
+ Eksport nie powiódł się.Packaged layer '%1' is not valid: '%2'
- Spakowana warstwa "%1" jest nieprawidłowa: "%2"
+ Spakowana warstwa "%1" jest nieprawidłowa: "%2"Failed to open temporary file for "%1", reason:
%2
- Nie udało się otworzyć pliku tymczasowego dla "%1", powód:
+ Nie udało się otworzyć pliku tymczasowego dla "%1", powód:
%2Failed to upload attachment stored at "%1", reason:
%2
- Nie udało się wysłać załącznika zapisanego w "%1", powód:
+ Nie udało się wysłać załącznika zapisanego w "%1", powód:
%2Failed to download file "%1", reason:
- Nie można pobrać pliku "%1", powód:
+ Nie można pobrać pliku "%1", powód:Failed to write downloaded file stored at "%1", fs reason:
- Nie udało się zapisać pobranego pliku zachowanego w "%1", powód:
+ Nie udało się zapisać pobranego pliku zachowanego w "%1", powód:aborted
@@ -2030,7 +2030,7 @@ Chociaż nadal możesz wyświetlać i używać projektu, zdecydowanie zaleca si
Failed to upload attachment stored at `%1`, reason:
%2
- Nie można było wysłać załącznika zapisanego w "%1", powód:
+ Nie można było wysłać załącznika zapisanego w "%1", powód:
%2
@@ -2316,7 +2316,7 @@ Chociaż nadal możesz wyświetlać i używać projektu, zdecydowanie zaleca si
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Jeśli włączone, jasność ekranu zostanie przyciemniona po 20 sekundach bezczynności, aby oszczędzać baterię.
+ Jeśli włączone, jasność ekranu zostanie przyciemniona po 20 sekundach bezczynności, aby oszczędzać baterię.Consider mouse as a touchscreen device
@@ -2372,15 +2372,15 @@ Chociaż nadal możesz wyświetlać i używać projektu, zdecydowanie zaleca si
Scanning for paired devices
- Skanowanie sparowanych urządzeń
+ Skanowanie sparowanych urządzeńScanning failed: %1
- Skanowanie nie powiodło się: %1
+ Skanowanie nie powiodło się: %1Scanning done
- Skanowanie zakończone
+ Skanowanie zakończone%n device(s) found
@@ -2388,20 +2388,20 @@ Chociaż nadal możesz wyświetlać i używać projektu, zdecydowanie zaleca si
Scanning canceled
- Skanowanie anulowane
+ Skanowanie anulowaneScan
- Skanuj
+ SkanujMake a full service discovery
- Wykonaj pełne skanowanie urządzeń
+ Wykonaj pełne skanowanie urządzeńA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Pełne skanowanie urządzeń może potrwać dłużej. Czy naprawdę chcesz je wykonać?
+ Pełne skanowanie urządzeń może potrwać dłużej. Czy naprawdę chcesz je wykonać?
Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
@@ -2410,7 +2410,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Connect to %1
- Połącz z %1
+ Połącz z %1Connecting to %1
@@ -2470,7 +2470,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Wartości Z, które są rejestrowane z urządzenia pozycjonującego, będą korygowane o tę wartość. Wprowadzenie wartości 1,6 spowoduje korektę -1,6 dla każdej zarejestrowanej wartości.
+ Wartości Z, które są rejestrowane z urządzenia pozycjonującego, będą korygowane o tę wartość. Wprowadzenie wartości 1,6 spowoduje korektę -1,6 dla każdej zarejestrowanej wartości.Skip altitude correction
@@ -2768,7 +2768,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Loading font %1
- Pobieranie czcionki %1
+ Pobieranie czcionki %1
@@ -2829,7 +2829,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Obrót widoku mapy nie jest wspierany. Przywracanie z %1 do 0.
+ Obrót widoku mapy nie jest wspierany. Przywracanie z %1 do 0.
@@ -2933,7 +2933,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Przygotowywanie QField, jest to operacja jednorazowa, która może trochę potrwać.
+ Przygotowywanie QField, jest to operacja jednorazowa, która może trochę potrwać.
@@ -2975,7 +2975,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
The connection was refused by the remote hose
- Połączenie zostało odrzucone przez zdalny serwer
+ Połączenie zostało odrzucone przez zdalny serwerUDP receiver error (%1)
@@ -3040,11 +3040,11 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Record when both active constraints are met
- Rejestruj, gdy oba aktywne ograniczenia są spełnione
+ Rejestruj, gdy oba aktywne ograniczenia są spełnioneWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Gdy ta opcja jest włączona, wierzchołki są rejestrowane tylko wtedy, gdy spełnione są oba aktywne ograniczenia. Jeśli to ustawienie jest wyłączone, spełnienie poszczególnego ograniczenia wywoła dodawanie wierzchołków.
+ Gdy ta opcja jest włączona, wierzchołki są rejestrowane tylko wtedy, gdy spełnione są oba aktywne ograniczenia. Jeśli to ustawienie jest wyłączone, spełnienie poszczególnego ograniczenia wywoła dodawanie wierzchołków.Start tracking
@@ -3052,7 +3052,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Cannot start track with empty values
- Nie można rozpocząć śladu z pustymi wartościami
+ Nie można rozpocząć śladu z pustymi wartościamiWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
@@ -3162,7 +3162,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
The connection was refused by the remote hose
- Połączenie zostało odrzucone przez zdalny serwer
+ Połączenie zostało odrzucone przez zdalny serwerUDP receiver error (%1)
@@ -3251,11 +3251,11 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Base map project
- Projekt bazowy
+ Projekt bazowyBase Map Project
- Projekt bazowy
+ Projekt bazowyRemove from Recent Projects
@@ -3263,7 +3263,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Witaj w QField. Pierwszy raz używasz tej aplikacji? Wypróbuj przykładowe projekty pokazane na poniższej liście.
+ Witaj w QField. Pierwszy raz używasz tej aplikacji? Wypróbuj przykładowe projekty pokazane na poniższej liście.Welcome back to QField.
@@ -3433,11 +3433,11 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Positioning activated
- Pozycjonowanie włączone
+ Pozycjonowanie włączonePositioning turned off
- Pozycjonowanie wyłączone
+ Pozycjonowanie wyłączoneCanvas stopped following location
@@ -3465,7 +3465,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Printing to PDF
- Drukowanie do PDF
+ Drukowanie do PDFGo to Home Screen
@@ -3477,7 +3477,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Open Project
- Przywróć projekt
+ Przywróć projektSettings
@@ -3493,7 +3493,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Select template below
- Wybierz szablon poniżej
+ Wybierz szablon poniżejActivating positioning service
@@ -3517,7 +3517,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Add Bookmark at Coordinates
- Dodaj zakładkę we współrzędnych
+ Dodaj zakładkę we współrzędnychUntitled bookmark
@@ -3525,7 +3525,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Set Coordinates as Destination
- Ustaw współrzędne jako cel
+ Ustaw współrzędne jako celCopy Coordinates
@@ -3533,11 +3533,11 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3549,27 +3549,27 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
0.25m Precision
- Dokładność 0,25 m
+ Dokładność 0,25 m0.5m Precision
- Dokładność 0,5 m
+ Dokładność 0,5 m1m Precision
- Dokładność 1 m
+ Dokładność 1 m2.5m Precision
- Dokładność 2,5 m
+ Dokładność 2,5 m5m Precision
- Dokładność 5 m
+ Dokładność 5 m10m Precision
- Dokładność 10 m
+ Dokładność 10 mAlways Show Precise View
@@ -3597,7 +3597,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Set As Destination
- Ustaw jako cel
+ Ustaw jako celNavigation Options
@@ -3633,11 +3633,11 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Center to Current Location
- Centruj do bieżącej pozycji
+ Centruj do bieżącej pozycjiAdd Bookmark at Current Location
- Dodaj zakładkę w bieżącej lokalizacji
+ Dodaj zakładkę w bieżącej lokalizacjiCurrent location unknown
@@ -3649,7 +3649,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Copy Current Location
- Skopiuj bieżącą lokalizację
+ Skopiuj bieżącą lokalizacjęAccuracy
@@ -3677,7 +3677,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Logged out
- Wylogowano
+ WylogowanoConnecting...
@@ -3685,7 +3685,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Logged in
- Zalogowano
+ ZalogowanoProject %1 failed to download
@@ -3709,7 +3709,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Positioning error: %1
- Błąd pozycjonowania: %1
+ Błąd pozycjonowania: %1Azimuth
@@ -3721,7 +3721,7 @@ Anuluj, aby wykonać zamiast tego minimalne skanowanie urządzeń.
Print to Image
- Drukuj do obrazu
+ Drukuj do obrazuPrinting...
diff --git a/i18n/qfield_pt.ts b/i18n/qfield_pt.ts
index 289336ba7f..e48f94abd7 100644
--- a/i18n/qfield_pt.ts
+++ b/i18n/qfield_pt.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Posicionamento do dispositivo em uso:
+ Posicionamento do dispositivo em uso:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Pesquisa
+ PesquisaMake a full service discovery
@@ -163,23 +163,23 @@ Cancele para fazer uma verificação mínima.
Connected to %1
- Ligado a %1
+ Ligado a %1Connect to %1
- Ligar a %1
+ Ligar a %1Connect to %1
- Ligar a %1
+ Ligar a %1Connecting to %1
- Ligando a %1
+ Ligando a %1Use orthometric altitude from device
- Utilize a altitude ortométrica do dispositivo
+ Utilize a altitude ortométrica do dispositivo Select the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancele para fazer uma verificação mínima.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Cancele para fazer uma verificação mínima.
BluetoothDeviceModelInternal device
- Dispositivo interno
+ Dispositivo interno
@@ -233,31 +233,31 @@ Cancele para fazer uma verificação mínima.
Could not find the remote host
- Não foi possível encontrar o host remoto
+ Não foi possível encontrar o host remotoCould not find the service UUID on remote host
- Não foi possível encontrar o UUID de serviço no host remoto
+ Não foi possível encontrar o UUID de serviço no host remotoAttempt to read or write from socket returned an error
- Tentativa de ler ou escrever a partir do socket retornou um erro
+ Tentativa de ler ou escrever a partir do socket retornou um erroThe protocol is not supported on this platform
- O protocolo não é suportado nesta plataforma
+ O protocolo não é suportado nesta plataformaAn operation was attempted while the socket was in a state that did not permit it
- Foi realizada uma tentativa da operação num momento em que não era permitido
+ Foi realizada uma tentativa da operação num momento em que não era permitidoThe remote host closed the connection
- O host remoto fechou a ligação
+ O host remoto fechou a ligaçãoUnknown error
- Erro desconhecido
+ Erro desconhecido
@@ -287,19 +287,19 @@ Cancele para fazer uma verificação mínima.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancele para fazer uma verificação mínima.
Hours
- Horas
+ HorasMinutes
- Minutos
+ MinutosSeconds
- Segundos
+ SegundosOK
- OK
+ OK
@@ -616,7 +616,7 @@ Cancele para fazer uma verificação mínima.
Last changes discarded
- As últimas alterações foram removidas
+ As últimas alterações foram removidasSuccessfully duplicated feature
@@ -746,7 +746,7 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
Set feature as navigation
- Definir elemento como navegação
+ Definir elemento como navegaçãoFeature has no geometry
@@ -818,15 +818,15 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Ir para %1 %2 (SRC do Mapa)
+ Ir para %1 %2 (SRC do Mapa)Set navigation point
- Definir ponto de navegação
+ Definir ponto de navegaçãoGo to %1° %2° (WGS84)
- Ir para %1° %2° (WGS84)
+ Ir para %1° %2° (WGS84)Go to coordinate
@@ -915,7 +915,7 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
Reload data
- Recarregar Dados
+ Recarregar DadosReload of layer %1 triggered
@@ -935,11 +935,11 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
Read-Only Layer
- Camada apenas de leitura
+ Camada apenas de leituraGeometry Locked Layer
- Bloquear geometria da camada
+ Bloquear geometria da camadaThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1008,7 +1008,7 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
Cannot add new feature in layer "%1".
- Não é possível adicionar novo elemento na camada "%1".
+ Não é possível adicionar novo elemento na camada "%1".
@@ -1084,18 +1084,18 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
LocatorItemSearch…
- Pesquisar...
+ Pesquisar...LocatorSettingsSearch Settings
- Configurações de Pesquisa
+ Configurações de PesquisaTrigger without its prefix
- Acionar sem o seu prefixo
+ Acionar sem o seu prefixoSearch Bar Settings
@@ -1224,15 +1224,15 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
Printing atlas feature(s) to PDF
- Imprimindo elemento(s) do atlas para PDF
+ Imprimindo elemento(s) do atlas para PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Elemento(s) do Atlas foram impressos para PDF com sucesso para os seus documentos
+ Elemento(s) do Atlas foram impressos para PDF com sucesso para os seus documentosPrint Atlas Feature(s) to Image
- Imprimir Elemento(s) para Imagem
+ Imprimir Elemento(s) para ImagemPrint Atlas Feature to Image
@@ -1255,7 +1255,7 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1263,11 +1263,11 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
Lon.
- Lon.
+ Lon.centroid
- centróide
+ centróideLon
@@ -1332,7 +1332,7 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
Last changes discarded
- As últimas alterações foram removidas
+ As últimas alterações foram removidasConstraints not valid
@@ -1343,15 +1343,15 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
PlatformUtilitiesSelect Media File
- Selecionar ficheiro multimédia
+ Selecionar ficheiro multimédiaJPEG images (*.jpg *.jpeg)
- Images JPEG (*.jpg *.jpeg)
+ Images JPEG (*.jpg *.jpeg)Failed to save gallery picture
- Falha ao guardar a foto na galeria
+ Falha ao guardar a foto na galeriaOpen File
@@ -1395,7 +1395,7 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
Audio files (*.mp3 *.aac *.ogg)
- Ficheiros áudio (*.mp3 *.aac *.ogg)
+ Ficheiros áudio (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1414,71 +1414,71 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- N/D
+ N/DX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Altitude
+ AltitudeSpeed
- Velocidade
+ VelocidadeH. Accuracy
- Precisão H.
+ Precisão H.V. Accuracy
- Precisão V.
+ Precisão V.PDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Válido
+ VálidoFix
- Fixo
+ FixoQuality
- Qualidade
+ Qualidade
@@ -1508,7 +1508,7 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1679,7 +1679,7 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
QFieldCloudLoginFailed to login
- Falha na autenticação
+ Falha na autenticaçãoFailed to sign in
@@ -1721,15 +1721,15 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
Logout
- Terminar sessão
+ Terminar sessãoLogging in, please wait
- Autentincando, por favor aguarde
+ Autentincando, por favor aguardeLogin
- Autenticar
+ AutenticarThe easiest way to transfer you project from QGIS to your devices!
@@ -1744,11 +1744,11 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Problemas no package da camada do QFieldCloud
+ Problemas no package da camada do QFieldCloudSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Algumas camadas não foram integradas no package corretamente no QfieldCloud. Essas camadas podem ficar desconfiguradas ou sem fonte de dados acessível a partir do servidor QFieldCloud.
+ Algumas camadas não foram integradas no package corretamente no QfieldCloud. Essas camadas podem ficar desconfiguradas ou sem fonte de dados acessível a partir do servidor QFieldCloud.QFieldCloud had troubles packaging your project
@@ -1859,7 +1859,7 @@ As geometrias dos recursos serão combinadas no recurso '% ', que mant
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Reverte todos os elementos modificados nas camadas localizadas na cloud local. Você não pode restaurar essas alterações.
+ Reverte todos os elementos modificados nas camadas localizadas na cloud local. Você não pode restaurar essas alterações.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1907,7 +1907,7 @@ Enquanto pode ver e usar o projeto, recomendamos fortemente a limpá-lo para evi
%n attachment(s) are currently being uploaded in the background.
- %n anexo está a ser atualmente carregado em segundo plano.%n anexos estão a ser atualmente carregados em segundo plano.%n anexos estão a ser atualmente carregados em segundo plano.
+ %n anexo está a ser atualmente carregado em segundo plano.%n anexos estão a ser atualmente carregados em segundo plano.%n anexos estão a ser atualmente carregados em segundo plano.Should local changes be reverted?
@@ -1942,31 +1942,31 @@ Enquanto pode ver e usar o projeto, recomendamos fortemente a limpá-lo para evi
QFieldCloudProjectsModelExport failed
- Falha ao exportar
+ Falha ao exportarPackaged layer '%1' is not valid: '%2'
- A camada '%1' do package não é válida: '%2'
+ A camada '%1' do package não é válida: '%2'Failed to open temporary file for "%1", reason:
%2
- Ocorreu uma falha ao abrir o ficheiro temporário para "%1", motivo:
+ Ocorreu uma falha ao abrir o ficheiro temporário para "%1", motivo:
%2Failed to upload attachment stored at "%1", reason:
%2
- Ocorreu um erro ao carregar o anexo armazenado em "%1", motivo:
+ Ocorreu um erro ao carregar o anexo armazenado em "%1", motivo:
%2Failed to download file "%1", reason:
- Ocorreu uma falha a transferir o ficheiro "%1", motivo:
+ Ocorreu uma falha a transferir o ficheiro "%1", motivo:Failed to write downloaded file stored at "%1", fs reason:
- Ocorreu uma falha ao gravar o ficheiro transferido e armazenado no "%1", motivo fs:
+ Ocorreu uma falha ao gravar o ficheiro transferido e armazenado no "%1", motivo fs:aborted
@@ -2037,7 +2037,7 @@ Enquanto pode ver e usar o projeto, recomendamos fortemente a limpá-lo para evi
Failed to upload attachment stored at `%1`, reason:
%2
- Falha ao carregar o anexo armazenado em `%1`, motivo:
+ Falha ao carregar o anexo armazenado em `%1`, motivo:
%2
@@ -2323,7 +2323,7 @@ Enquanto pode ver e usar o projeto, recomendamos fortemente a limpá-lo para evi
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Se ativo, o brilho do ecrã diminuirá após 20 segundos de inatividade para preservar o nível da bateria.
+ Se ativo, o brilho do ecrã diminuirá após 20 segundos de inatividade para preservar o nível da bateria.Consider mouse as a touchscreen device
@@ -2379,36 +2379,36 @@ Enquanto pode ver e usar o projeto, recomendamos fortemente a limpá-lo para evi
Scanning for paired devices
- Pesquisa por dispositivos emparelhados
+ Pesquisa por dispositivos emparelhadosScanning failed: %1
- Pesquisa falhou: %1
+ Pesquisa falhou: %1Scanning done
- Pesquisa feita
+ Pesquisa feita%n device(s) found
- %n dispositivo encontrado%n dispositivos encontrados%n dispositivos encontrados
+ %n dispositivo encontrado%n dispositivos encontrados%n dispositivos encontradosScanning canceled
- Pesquisa cancelada
+ Pesquisa canceladaScan
- Pesquisa
+ PesquisaMake a full service discovery
- Fazer uma descoberta completa do serviço
+ Fazer uma descoberta completa do serviçoA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Uma verificação completa do dispositivo pode demorar. Quer realmente fazer isso?
+ Uma verificação completa do dispositivo pode demorar. Quer realmente fazer isso?
Cancele para fazer uma verificação mínima.
@@ -2417,7 +2417,7 @@ Cancele para fazer uma verificação mínima.
Connect to %1
- Ligar a %1
+ Ligar a %1Connecting to %1
@@ -2477,7 +2477,7 @@ Cancele para fazer uma verificação mínima.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Os valores Z que são registados a partir de um recetor de posicionamento serão corrigidos por esse valor. Se um valor de 1,6 for inserido, isso resultará numa correção de -1,6 para cada valor registado.
+ Os valores Z que são registados a partir de um recetor de posicionamento serão corrigidos por esse valor. Se um valor de 1,6 for inserido, isso resultará numa correção de -1,6 para cada valor registado.Skip altitude correction
@@ -2775,7 +2775,7 @@ Cancele para fazer uma verificação mínima.
Loading font %1
- A Carregar a fonte %1
+ A Carregar a fonte %1
@@ -2836,7 +2836,7 @@ Cancele para fazer uma verificação mínima.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Rotação do mapa não suportado. Removendo de %1 para 0.
+ Rotação do mapa não suportado. Removendo de %1 para 0.
@@ -2940,7 +2940,7 @@ Cancele para fazer uma verificação mínima.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Preparar o QField, esta é uma operação única que pode levar algum tempo
+ Preparar o QField, esta é uma operação única que pode levar algum tempo
@@ -2982,7 +2982,7 @@ Cancele para fazer uma verificação mínima.
The connection was refused by the remote hose
- A ligação foi recusada pelo servidor remoto
+ A ligação foi recusada pelo servidor remotoUDP receiver error (%1)
@@ -3047,11 +3047,11 @@ Cancele para fazer uma verificação mínima.
Record when both active constraints are met
- Registar quando ambas restrições ativas forem atendidas
+ Registar quando ambas restrições ativas forem atendidasWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Quando ativo, os vértices só serão gravados quando ambas restrições forem válidas. Se a configuração está desativada, as restrições individuais válidas irão ativar a adição de vértices.
+ Quando ativo, os vértices só serão gravados quando ambas restrições forem válidas. Se a configuração está desativada, as restrições individuais válidas irão ativar a adição de vértices.Start tracking
@@ -3059,11 +3059,11 @@ Cancele para fazer uma verificação mínima.
Cannot start track with empty values
- Não é possível iniciar o rastreamento com valores vazios
+ Não é possível iniciar o rastreamento com valores vaziosWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- Quando ambas as restrições estiverem desligadas, as adições de vértices ocorrem com a mesma frequência que são fornecidas pelo posicionamento do dispositivo.
+ Quando ambas as restrições estiverem desligadas, as adições de vértices ocorrem com a mesma frequência que são fornecidas pelo posicionamento do dispositivo.Measure (M) value attached to vertices:
@@ -3169,7 +3169,7 @@ Cancele para fazer uma verificação mínima.
The connection was refused by the remote hose
- A ligação foi recusada pelo servidor remoto
+ A ligação foi recusada pelo servidor remotoUDP receiver error (%1)
@@ -3258,11 +3258,11 @@ Cancele para fazer uma verificação mínima.
Base map project
- Projeto mapa base
+ Projeto mapa baseBase Map Project
- Projeto Mapa Base
+ Projeto Mapa BaseRemove from Recent Projects
@@ -3270,7 +3270,7 @@ Cancele para fazer uma verificação mínima.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Bem-vindo ao QField. É a primeira vez que está a usar a aplicação? Experimente alguns exemplos de projetos abaixo listados.
+ Bem-vindo ao QField. É a primeira vez que está a usar a aplicação? Experimente alguns exemplos de projetos abaixo listados.Welcome back to QField.
@@ -3440,11 +3440,11 @@ Cancele para fazer uma verificação mínima.
Positioning activated
- Posicionamento ativo
+ Posicionamento ativoPositioning turned off
- Posicionamento desativado
+ Posicionamento desativadoCanvas stopped following location
@@ -3472,7 +3472,7 @@ Cancele para fazer uma verificação mínima.
Printing to PDF
- Imprimir para PDF
+ Imprimir para PDFGo to Home Screen
@@ -3484,7 +3484,7 @@ Cancele para fazer uma verificação mínima.
Open Project
- Abrir Projeto
+ Abrir ProjetoSettings
@@ -3500,7 +3500,7 @@ Cancele para fazer uma verificação mínima.
Select template below
- Selecione o modelo abaixo
+ Selecione o modelo abaixoActivating positioning service
@@ -3524,7 +3524,7 @@ Cancele para fazer uma verificação mínima.
Add Bookmark at Coordinates
- Adicionar Marcador às Coordenadas
+ Adicionar Marcador às CoordenadasUntitled bookmark
@@ -3532,7 +3532,7 @@ Cancele para fazer uma verificação mínima.
Set Coordinates as Destination
- Definir coordenadas como destino
+ Definir coordenadas como destinoCopy Coordinates
@@ -3540,11 +3540,11 @@ Cancele para fazer uma verificação mínima.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3556,27 +3556,27 @@ Cancele para fazer uma verificação mínima.
0.25m Precision
- 0.25m Precisão
+ 0.25m Precisão0.5m Precision
- 0.5m Precisão
+ 0.5m Precisão1m Precision
- 1m Precisão
+ 1m Precisão2.5m Precision
- 2.5m Precisão
+ 2.5m Precisão5m Precision
- 5m Precisão
+ 5m Precisão10m Precision
- 10m Precisão
+ 10m PrecisãoAlways Show Precise View
@@ -3604,7 +3604,7 @@ Cancele para fazer uma verificação mínima.
Set As Destination
- Definir como destino
+ Definir como destinoNavigation Options
@@ -3640,11 +3640,11 @@ Cancele para fazer uma verificação mínima.
Center to Current Location
- Centrar para a localização atual
+ Centrar para a localização atualAdd Bookmark at Current Location
- Adicionar Marcador à Localização Actual
+ Adicionar Marcador à Localização ActualCurrent location unknown
@@ -3656,7 +3656,7 @@ Cancele para fazer uma verificação mínima.
Copy Current Location
- Copiar localização atual
+ Copiar localização atualAccuracy
@@ -3684,7 +3684,7 @@ Cancele para fazer uma verificação mínima.
Logged out
- Terminada autenticação
+ Terminada autenticaçãoConnecting...
@@ -3692,7 +3692,7 @@ Cancele para fazer uma verificação mínima.
Logged in
- Autenticado
+ AutenticadoProject %1 failed to download
@@ -3716,7 +3716,7 @@ Cancele para fazer uma verificação mínima.
Positioning error: %1
- Erro de posicionamento: %1
+ Erro de posicionamento: %1Azimuth
@@ -3728,7 +3728,7 @@ Cancele para fazer uma verificação mínima.
Print to Image
- Imprimir a Imagem
+ Imprimir a ImagemPrinting...
diff --git a/i18n/qfield_pt_BR.ts b/i18n/qfield_pt_BR.ts
index b863f0c9c3..e728fbf7e1 100644
--- a/i18n/qfield_pt_BR.ts
+++ b/i18n/qfield_pt_BR.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Dispositivo de posicionamento em uso:
+ Dispositivo de posicionamento em uso:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Escanear
+ EscanearMake a full service discovery
@@ -163,23 +163,23 @@ Cancele para fazer uma verificação mínima.
Connected to %1
- Conectado em %1
+ Conectado em %1Connect to %1
- Conectar a %1
+ Conectar a %1Connect to %1
- Conecte em %1
+ Conecte em %1Connecting to %1
- Conectando em %1
+ Conectando em %1Use orthometric altitude from device
- Utilize a altitude ortométrica do dispositivo
+ Utilize a altitude ortométrica do dispositivo Select the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancele para fazer uma verificação mínima.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Cancele para fazer uma verificação mínima.
BluetoothDeviceModelInternal device
- Dispositivo Interno
+ Dispositivo Interno
@@ -233,31 +233,31 @@ Cancele para fazer uma verificação mínima.
Could not find the remote host
- Não foi possível encontrar o host remoto
+ Não foi possível encontrar o host remotoCould not find the service UUID on remote host
- Não foi possível encontrar o UUID de serviço no host remoto
+ Não foi possível encontrar o UUID de serviço no host remotoAttempt to read or write from socket returned an error
- Tentativa de ler ou escrever a partir do socket retornou um erro
+ Tentativa de ler ou escrever a partir do socket retornou um erroThe protocol is not supported on this platform
- O protocolo não é suportado nesta plataforma
+ O protocolo não é suportado nesta plataformaAn operation was attempted while the socket was in a state that did not permit it
- Foi realizada uma tentativa de operação num momento em que não era permitido
+ Foi realizada uma tentativa de operação num momento em que não era permitidoThe remote host closed the connection
- O host remoto fechou a conexão
+ O host remoto fechou a conexãoUnknown error
- Erro desconhecido
+ Erro desconhecido
@@ -287,19 +287,19 @@ Cancele para fazer uma verificação mínima.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancele para fazer uma verificação mínima.
Hours
- Horas
+ HorasMinutes
- Minutos
+ MinutosSeconds
- Segundos
+ SegundosOK
- OK
+ OK
@@ -616,7 +616,7 @@ Cancele para fazer uma verificação mínima.
Last changes discarded
- Últimas alterações descartadas
+ Últimas alterações descartadasSuccessfully duplicated feature
@@ -740,7 +740,7 @@ The features geometries will be combined into feature '%1', which will
Set feature as navigation
- Definir elemento como navegação
+ Definir elemento como navegaçãoFeature has no geometry
@@ -812,15 +812,15 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Vá para %1 %2 (Mapa CRS)
+ Vá para %1 %2 (Mapa CRS)Set navigation point
- Definir ponto de navegação
+ Definir ponto de navegaçãoGo to %1° %2° (WGS84)
- Vá para %1° %2° (WGS84)
+ Vá para %1° %2° (WGS84)Go to coordinate
@@ -909,7 +909,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- Recarregar Dados
+ Recarregar DadosReload of layer %1 triggered
@@ -929,11 +929,11 @@ The features geometries will be combined into feature '%1', which will
Read-Only Layer
- Camada apenas de leitura
+ Camada apenas de leituraGeometry Locked Layer
- Geometria da camada bloqueada
+ Geometria da camada bloqueadaThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1002,7 +1002,7 @@ The features geometries will be combined into feature '%1', which will
Cannot add new feature in layer "%1".
- Não é possível adicionar novo elemento na camada "%1".
+ Não é possível adicionar novo elemento na camada "%1".
@@ -1078,18 +1078,18 @@ The features geometries will be combined into feature '%1', which will
LocatorItemSearch…
- Procurar...
+ Procurar...LocatorSettingsSearch Settings
- Buscar Configurações
+ Buscar ConfiguraçõesTrigger without its prefix
- Ativada sem prefixo
+ Ativada sem prefixoSearch Bar Settings
@@ -1218,11 +1218,11 @@ The features geometries will be combined into feature '%1', which will
Printing atlas feature(s) to PDF
- Exportando elemento(s) do atlas para PDF
+ Exportando elemento(s) do atlas para PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Elemento(s) do Atlas foram exportados para PDF com sucesso e estão nos seus documentos
+ Elemento(s) do Atlas foram exportados para PDF com sucesso e estão nos seus documentosPrint Atlas Feature(s) to Image
@@ -1249,7 +1249,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1257,7 +1257,7 @@ The features geometries will be combined into feature '%1', which will
Lon.
- Lon.
+ Lon.centroid
@@ -1326,7 +1326,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- Últimas alterações descartadas
+ Últimas alterações descartadasConstraints not valid
@@ -1337,15 +1337,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- Selecionar arquivo de mídia
+ Selecionar arquivo de mídiaJPEG images (*.jpg *.jpeg)
- Imagens JPEG (*.jpg *.jpeg)
+ Imagens JPEG (*.jpg *.jpeg)Failed to save gallery picture
- Falha ao salvar a foto da galeria
+ Falha ao salvar a foto da galeriaOpen File
@@ -1408,71 +1408,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- N/A
+ N/AX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Altitude
+ AltitudeSpeed
- Velocidade
+ VelocidadeH. Accuracy
- H. Precisão
+ H. PrecisãoV. Accuracy
- V. Precisão
+ V. PrecisãoPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Válido
+ VálidoFix
- Fixo
+ FixoQuality
- Qualidade
+ Qualidade
@@ -1672,7 +1672,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- Falha ao realizar login
+ Falha ao realizar loginFailed to sign in
@@ -1713,15 +1713,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- Log out
+ Log outLogging in, please wait
- Fazendo login, espere um momento
+ Fazendo login, espere um momentoLogin
- Login
+ LoginThe easiest way to transfer you project from QGIS to your devices!
@@ -1736,7 +1736,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Problemas no package da camada do QFieldCloud
+ Problemas no package da camada do QFieldCloudSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
@@ -1851,7 +1851,7 @@ The features geometries will be combined into feature '%1', which will
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Reverte todos os elementos modificados nas camadas localizadas na nuvem local. Você não pode restaurar essas alterações.
+ Reverte todos os elementos modificados nas camadas localizadas na nuvem local. Você não pode restaurar essas alterações.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1932,31 +1932,31 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Falha ao exportar
+ Falha ao exportarPackaged layer '%1' is not valid: '%2'
- A camada '%1' do package não é válida: '%2'
+ A camada '%1' do package não é válida: '%2'Failed to open temporary file for "%1", reason:
%2
- Falha ao abrir o arquivo temporário "%1", motivo:
+ Falha ao abrir o arquivo temporário "%1", motivo:
%2Failed to upload attachment stored at "%1", reason:
%2
- Ocorreu um erro ao carregar o anexo armazenado em "%1", motivo:
+ Ocorreu um erro ao carregar o anexo armazenado em "%1", motivo:
%2Failed to download file "%1", reason:
- Falha ao baixar o arquivo "%1", motivo:
+ Falha ao baixar o arquivo "%1", motivo:Failed to write downloaded file stored at "%1", fs reason:
- Ocorreu uma falha ao gravar o arquivo armazenado no "%1", motivo fs:
+ Ocorreu uma falha ao gravar o arquivo armazenado no "%1", motivo fs:aborted
@@ -2312,7 +2312,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Se habilitado, o brilho da tela diminuirá após 20 segundos de inatividade para preservar o nível da bateria.
+ Se habilitado, o brilho da tela diminuirá após 20 segundos de inatividade para preservar o nível da bateria.Consider mouse as a touchscreen device
@@ -2368,36 +2368,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Procurando por dispositivos pareados
+ Procurando por dispositivos pareadosScanning failed: %1
- Escaneamento falhou: %1
+ Escaneamento falhou: %1Scanning done
- Escaneamento feito
+ Escaneamento feito%n device(s) found
- %n dispositivo(s) encontrados%n dispositivo(s) encontrados%n dispositivo(s) encontrados
+ %n dispositivo(s) encontrados%n dispositivo(s) encontrados%n dispositivo(s) encontradosScanning canceled
- Escaneamento cancelado
+ Escaneamento canceladoScan
- Escanear
+ EscanearMake a full service discovery
- Fazer uma descoberta completa do serviço
+ Fazer uma descoberta completa do serviçoA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Uma verificação completa do dispositivo pode demorar. Quer realmente fazer isso?
+ Uma verificação completa do dispositivo pode demorar. Quer realmente fazer isso?
Cancele para fazer uma verificação mínima.
@@ -2406,7 +2406,7 @@ Cancele para fazer uma verificação mínima.
Connect to %1
- Conecte em %1
+ Conecte em %1Connecting to %1
@@ -2466,7 +2466,7 @@ Cancele para fazer uma verificação mínima.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Os valores Z que são registados a partir de um receptor de posicionamento serão corrigidos por esse valor. Se um valor de 1,6 for inserido, isso resultará numa correção de -1,6 para cada valor registado.
+ Os valores Z que são registados a partir de um receptor de posicionamento serão corrigidos por esse valor. Se um valor de 1,6 for inserido, isso resultará numa correção de -1,6 para cada valor registado.Skip altitude correction
@@ -2764,7 +2764,7 @@ Cancele para fazer uma verificação mínima.
Loading font %1
- Carregando a fonte %1
+ Carregando a fonte %1
@@ -2825,7 +2825,7 @@ Cancele para fazer uma verificação mínima.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- A rotação do mapa na tela não é suportada. Redefinindo de %1 para 0.
+ A rotação do mapa na tela não é suportada. Redefinindo de %1 para 0.
@@ -2929,7 +2929,7 @@ Cancele para fazer uma verificação mínima.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Preparando o QField, esta é uma operação única que pode levar algum tempo
+ Preparando o QField, esta é uma operação única que pode levar algum tempo
@@ -3036,11 +3036,11 @@ Cancele para fazer uma verificação mínima.
Record when both active constraints are met
- Gravar quando ambas restrições ativas forem atendidas
+ Gravar quando ambas restrições ativas forem atendidasWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Quando habilitado, os vertices só serão gravados quando ambas restrições forem atentidas. Se a configuração está desabilitada, as restrições individuais atendidas irão ativar a adição de vértices.
+ Quando habilitado, os vertices só serão gravados quando ambas restrições forem atentidas. Se a configuração está desabilitada, as restrições individuais atendidas irão ativar a adição de vértices.Start tracking
@@ -3048,7 +3048,7 @@ Cancele para fazer uma verificação mínima.
Cannot start track with empty values
- Não é possível iniciar a trilha com valores vazios
+ Não é possível iniciar a trilha com valores vaziosWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
@@ -3247,11 +3247,11 @@ Cancele para fazer uma verificação mínima.
Base map project
- Projeto Mapa Base
+ Projeto Mapa BaseBase Map Project
- Projeto Mapa Base
+ Projeto Mapa BaseRemove from Recent Projects
@@ -3259,7 +3259,7 @@ Cancele para fazer uma verificação mínima.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Bem-vindo ao QField. É a primeira vez usando o app? Experimente alguns exemplos de projetos abaixo listados.
+ Bem-vindo ao QField. É a primeira vez usando o app? Experimente alguns exemplos de projetos abaixo listados.Welcome back to QField.
@@ -3429,11 +3429,11 @@ Cancele para fazer uma verificação mínima.
Positioning activated
- Posicionamento ativado
+ Posicionamento ativadoPositioning turned off
- Posicionamento desativado
+ Posicionamento desativadoCanvas stopped following location
@@ -3461,7 +3461,7 @@ Cancele para fazer uma verificação mínima.
Printing to PDF
- Exportando para PDF
+ Exportando para PDFGo to Home Screen
@@ -3473,7 +3473,7 @@ Cancele para fazer uma verificação mínima.
Open Project
- Abrir Projeto
+ Abrir ProjetoSettings
@@ -3489,7 +3489,7 @@ Cancele para fazer uma verificação mínima.
Select template below
- Selecione o modelo abaixo
+ Selecione o modelo abaixoActivating positioning service
@@ -3513,7 +3513,7 @@ Cancele para fazer uma verificação mínima.
Add Bookmark at Coordinates
- Adicionar Marcador às Coordenadas
+ Adicionar Marcador às CoordenadasUntitled bookmark
@@ -3521,7 +3521,7 @@ Cancele para fazer uma verificação mínima.
Set Coordinates as Destination
- Definir coordenadas como destino
+ Definir coordenadas como destinoCopy Coordinates
@@ -3529,11 +3529,11 @@ Cancele para fazer uma verificação mínima.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3593,7 +3593,7 @@ Cancele para fazer uma verificação mínima.
Set As Destination
- Definir como destino
+ Definir como destinoNavigation Options
@@ -3629,11 +3629,11 @@ Cancele para fazer uma verificação mínima.
Center to Current Location
- Centralizar Localização Atual
+ Centralizar Localização AtualAdd Bookmark at Current Location
- Adicionar Marcador à Localização Atual
+ Adicionar Marcador à Localização AtualCurrent location unknown
@@ -3645,7 +3645,7 @@ Cancele para fazer uma verificação mínima.
Copy Current Location
- Copiar localização atual
+ Copiar localização atualAccuracy
@@ -3673,7 +3673,7 @@ Cancele para fazer uma verificação mínima.
Logged out
- Desconectado
+ DesconectadoConnecting...
@@ -3681,7 +3681,7 @@ Cancele para fazer uma verificação mínima.
Logged in
- Conectando
+ ConectandoProject %1 failed to download
@@ -3705,7 +3705,7 @@ Cancele para fazer uma verificação mínima.
Positioning error: %1
- Erro de posicionamento: %1
+ Erro de posicionamento: %1Azimuth
diff --git a/i18n/qfield_ro.ts b/i18n/qfield_ro.ts
index 437fba7eed..b4752a22ff 100644
--- a/i18n/qfield_ro.ts
+++ b/i18n/qfield_ro.ts
@@ -126,7 +126,7 @@ Vă rugăm să le examinați și să reconfigurați proiectul QGIS.BluetoothDeviceChooser
Positioning device in use:
- Dispozitiv de poziționare în uz:
+ Dispozitiv de poziționare în uz:Scanning for paired devices
@@ -150,7 +150,7 @@ Vă rugăm să le examinați și să reconfigurați proiectul QGIS.
Scan
- Scanare
+ ScanareMake a full service discovery
@@ -164,23 +164,23 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Connected to %1
- Contectat la %1
+ Contectat la %1Connect to %1
- Contectat la %1
+ Contectat la %1Connect to %1
- Conectare la %1
+ Conectare la %1Connecting to %1
- Se contectează la %1
+ Se contectează la %1Use orthometric altitude from device
- Utilizați altitudinea ortometrică a dispozitivului
+ Utilizați altitudinea ortometrică a dispozitivuluiSelect the Bluetooth device from the list below:
@@ -192,7 +192,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
N/A
- N/A
+ N/ABluetooth device address:
@@ -211,7 +211,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
BluetoothDeviceModelInternal device
- Dispozitiv intern
+ Dispozitiv intern
@@ -234,31 +234,31 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Could not find the remote host
- Nu s-a putut găsi gazda la distanță
+ Nu s-a putut găsi gazda la distanțăCould not find the service UUID on remote host
- Nu s-a putut determina UUID-ul serviciului de pe gazda aflată la distanță
+ Nu s-a putut determina UUID-ul serviciului de pe gazda aflată la distanțăAttempt to read or write from socket returned an error
- Încercarea de a citi sau scrie din socket a returnat o eroare
+ Încercarea de a citi sau scrie din socket a returnat o eroareThe protocol is not supported on this platform
- Protocolul nu este acceptat pe această platformă
+ Protocolul nu este acceptat pe această platformăAn operation was attempted while the socket was in a state that did not permit it
- S-a încercat o operațiune în timp ce socketul era într-o stare care nu permitea acest lucru
+ S-a încercat o operațiune în timp ce socketul era într-o stare care nu permitea acest lucruThe remote host closed the connection
- Gazda aflată la distanță a închis conexiunea
+ Gazda aflată la distanță a închis conexiuneaUnknown error
- Eroare necunoscută
+ Eroare necunoscută
@@ -288,19 +288,19 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -427,19 +427,19 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Hours
- Ore
+ OreMinutes
- Minute
+ MinuteSeconds
- Secunde
+ SecundeOK
- OK
+ OK
@@ -617,7 +617,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Last changes discarded
- Ultimele modificări nu s-au salvat
+ Ultimele modificări nu s-au salvatSuccessfully duplicated feature
@@ -748,7 +748,7 @@ Motiv:
Set feature as navigation
- Setați caracteristica ca navigație
+ Setați caracteristica ca navigațieFeature has no geometry
@@ -820,15 +820,15 @@ Motiv:
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Mergi la %1 %2 (CRS Hartă)
+ Mergi la %1 %2 (CRS Hartă)Set navigation point
- Seteză punct de navigare
+ Seteză punct de navigareGo to %1° %2° (WGS84)
- Mergi la %1° %2° (WGS84)
+ Mergi la %1° %2° (WGS84)Go to coordinate
@@ -917,7 +917,7 @@ Motiv:
Reload data
- Reîncărcarea datelor
+ Reîncărcarea datelorReload of layer %1 triggered
@@ -937,11 +937,11 @@ Motiv:
Read-Only Layer
- Strat Read-Only
+ Strat Read-OnlyGeometry Locked Layer
- Strat cu Geometrie Fixată
+ Strat cu Geometrie FixatăThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1010,7 +1010,7 @@ Motiv:
Cannot add new feature in layer "%1".
- Nu se poate adăuga un element nou în strat "%1.
+ Nu se poate adăuga un element nou în strat "%1.
@@ -1086,18 +1086,18 @@ Motiv:
LocatorItemSearch…
- Căutare
+ CăutareLocatorSettingsSearch Settings
- Setări Căutare
+ Setări CăutareTrigger without its prefix
- Declanșator fără prefix
+ Declanșator fără prefixSearch Bar Settings
@@ -1226,11 +1226,11 @@ Motiv:
Printing atlas feature(s) to PDF
- Printează elemen(ele) atlas ca PDF
+ Printează elemen(ele) atlas ca PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Element(ele) Atlas, au fost printate cu succes în PDF și salvate în documente
+ Element(ele) Atlas, au fost printate cu succes în PDF și salvate în documentePrint Atlas Feature(s) to Image
@@ -1257,7 +1257,7 @@ Motiv:
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1265,11 +1265,11 @@ Motiv:
Lon.
- Lon.
+ Lon.centroid
- centroid
+ centroidLon
@@ -1334,7 +1334,7 @@ Motiv:
Last changes discarded
- Ultimele modificări nu s-au salvat
+ Ultimele modificări nu s-au salvatConstraints not valid
@@ -1345,15 +1345,15 @@ Motiv:
PlatformUtilitiesSelect Media File
- Selectare Fișier Media
+ Selectare Fișier MediaJPEG images (*.jpg *.jpeg)
- Imagini JPEG (*.jpg *.jpeg)
+ Imagini JPEG (*.jpg *.jpeg)Failed to save gallery picture
- Nu s-a putut salva imaginea în galerie
+ Nu s-a putut salva imaginea în galerieOpen File
@@ -1416,71 +1416,71 @@ Motiv:
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- N/A
+ N/AX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Altitudine
+ AltitudineSpeed
- Viteză
+ VitezăH. Accuracy
- Acurateţea H.
+ Acurateţea H.V. Accuracy
- Acurateţea V.
+ Acurateţea V.PDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Valid
+ ValidFix
- Rezolvat
+ RezolvatQuality
- Calitate
+ Calitate
@@ -1510,7 +1510,7 @@ Motiv:
Bluetooth
- Bluetooth
+ BluetoothBluetooth (NMEA)
@@ -1681,7 +1681,7 @@ Motiv:
QFieldCloudLoginFailed to login
- Autentificare eșuată
+ Autentificare eșuatăFailed to sign in
@@ -1723,15 +1723,15 @@ Motiv:
Logout
- Deconectare
+ DeconectareLogging in, please wait
- Conectare, vă rugăm să așteptați
+ Conectare, vă rugăm să așteptațiLogin
- Autentificare
+ AutentificareThe easiest way to transfer you project from QGIS to your devices!
@@ -1746,11 +1746,11 @@ Motiv:
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Împachetarea straturilor QFieldCloud problematică
+ Împachetarea straturilor QFieldCloud problematicăSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Unele straturi nu au fost împachetate corect pe QFieldCloud. Aceste straturi pot fi configurate greșit sau sursa lor de date nu este accesibilă din serverul QFieldCloud.
+ Unele straturi nu au fost împachetate corect pe QFieldCloud. Aceste straturi pot fi configurate greșit sau sursa lor de date nu este accesibilă din serverul QFieldCloud.QFieldCloud had troubles packaging your project
@@ -1861,7 +1861,7 @@ Motiv:
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Reveniți la toate elementele modificate din straturile locale de cloud. Nu puteți restabili aceste schimbări.
+ Reveniți la toate elementele modificate din straturile locale de cloud. Nu puteți restabili aceste schimbări.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1909,7 +1909,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- %n atașament(ele) %n sunt încărcate în fundal.%n atașament(ele) %n sunt încărcate în fundal.%n atașament(ele) %n sunt încărcate în fundal.
+ %n atașament(ele) %n sunt încărcate în fundal.%n atașament(ele) %n sunt încărcate în fundal.%n atașament(ele) %n sunt încărcate în fundal.Should local changes be reverted?
@@ -1944,31 +1944,31 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Exportare eșuată
+ Exportare eșuatăPackaged layer '%1' is not valid: '%2'
- Stratul împachetat '%1' nu este valid: '%2'
+ Stratul împachetat '%1' nu este valid: '%2'Failed to open temporary file for "%1", reason:
%2
- Nu s-a putut deschide fișierul temporar pentru "%1", motiv:
+ Nu s-a putut deschide fișierul temporar pentru "%1", motiv:
%2Failed to upload attachment stored at "%1", reason:
%2
- Nu s-a putut încărca atașamentul stocat la "%1", motivul:
+ Nu s-a putut încărca atașamentul stocat la "%1", motivul:
%2Failed to download file "%1", reason:
- Nu s-a putut descărca fișierul "%1", motiv:
+ Nu s-a putut descărca fișierul "%1", motiv:Failed to write downloaded file stored at "%1", fs reason:
- Nu s-a putut scrie fișierul descărcat stocat la "%1", motiv:
+ Nu s-a putut scrie fișierul descărcat stocat la "%1", motiv:aborted
@@ -2039,7 +2039,7 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to upload attachment stored at `%1`, reason:
%2
- Nu s-a putut încărca atașamentul stocat la `%1`, motiv:
+ Nu s-a putut încărca atașamentul stocat la `%1`, motiv:
% 2
@@ -2325,7 +2325,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Dacă este activată, luminozitatea ecranului va fi redusă după 20 secunde de inactivitate pentru a păstra energia bateriei.
+ Dacă este activată, luminozitatea ecranului va fi redusă după 20 secunde de inactivitate pentru a păstra energia bateriei.Consider mouse as a touchscreen device
@@ -2381,36 +2381,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Scanare pentru dispozitive asociate
+ Scanare pentru dispozitive asociateScanning failed: %1
- Scanarea a eșuat: %1
+ Scanarea a eșuat: %1Scanning done
- Scanare cu succes
+ Scanare cu succes%n device(s) found
- %n dispozitiv(e) găsite%n dispozitiv(e) găsite%n dispozitiv(e) găsite
+ %n dispozitiv(e) găsite%n dispozitiv(e) găsite%n dispozitiv(e) găsiteScanning canceled
- Scanare anulată
+ Scanare anulatăScan
- Scanare
+ ScanareMake a full service discovery
- Faceți o descoperire completă a serviciilor
+ Faceți o descoperire completă a serviciilorA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- O scanare completă a dispozitivului poate dura mai mult. Chiar doriți să o faceți?
+ O scanare completă a dispozitivului poate dura mai mult. Chiar doriți să o faceți?
Anulați pentru a efectua o scanare minimă a dispozitivului.
@@ -2419,7 +2419,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Connect to %1
- Conectare la %1
+ Conectare la %1Connecting to %1
@@ -2479,7 +2479,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Valorile Z înregistrate de la dispozitivul de poziționare vor fi corectate cu această valoare. Dacă este introdusă o valoare de 1.6, aceasta va avea ca rezultat o corecție de -1,6 pentru fiecare valoare înregistrată.
+ Valorile Z înregistrate de la dispozitivul de poziționare vor fi corectate cu această valoare. Dacă este introdusă o valoare de 1.6, aceasta va avea ca rezultat o corecție de -1,6 pentru fiecare valoare înregistrată.Skip altitude correction
@@ -2777,7 +2777,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Loading font %1
- Încărcarea fontului %1
+ Încărcarea fontului %1
@@ -2838,7 +2838,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Rotația canevasului nu este permisă. Resetarea de la %1 la 0.
+ Rotația canevasului nu este permisă. Resetarea de la %1 la 0.
@@ -2942,7 +2942,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- QField se încarcă. Această operațiune se face o singură dată și poate dura cateva minute
+ QField se încarcă. Această operațiune se face o singură dată și poate dura cateva minute
@@ -2984,7 +2984,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
The connection was refused by the remote hose
- Conexiunea a fost refuzată de gazda aflată la distanță
+ Conexiunea a fost refuzată de gazda aflată la distanțăUDP receiver error (%1)
@@ -3049,11 +3049,11 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Record when both active constraints are met
- Înregistrați când sunt îndeplinite ambele condiții de constrânge active
+ Înregistrați când sunt îndeplinite ambele condiții de constrânge activeWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Atunci când este activat, nodurile se înregistrează numai atunci când sunt îndeplinite ambele constrângerile individuale îndeplinite și astfel vor declanșa o adăugare de noduri.
+ Atunci când este activat, nodurile se înregistrează numai atunci când sunt îndeplinite ambele constrângerile individuale îndeplinite și astfel vor declanșa o adăugare de noduri.Start tracking
@@ -3061,7 +3061,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Cannot start track with empty values
- Nu se poate porni traseul cu valori goale
+ Nu se poate porni traseul cu valori goaleWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
@@ -3171,7 +3171,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
The connection was refused by the remote hose
- Conexiunea a fost refuzată de gazda aflată la distanță
+ Conexiunea a fost refuzată de gazda aflată la distanțăUDP receiver error (%1)
@@ -3260,11 +3260,11 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Base map project
- Proiectul de bază al hărții
+ Proiectul de bază al hărțiiBase Map Project
- Proiectul de bază al Hărții
+ Proiectul de bază al HărțiiRemove from Recent Projects
@@ -3272,7 +3272,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Bine ați venit pe QField. Este prima dată când utilizați această aplicație? Încercați exemplele de proiecte enumerate în lista de mai jos.
+ Bine ați venit pe QField. Este prima dată când utilizați această aplicație? Încercați exemplele de proiecte enumerate în lista de mai jos.Welcome back to QField.
@@ -3442,11 +3442,11 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Positioning activated
- Poziționarea este activată
+ Poziționarea este activatăPositioning turned off
- Poziționarea nu este activată
+ Poziționarea nu este activatăCanvas stopped following location
@@ -3474,7 +3474,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Printing to PDF
- Print PDF
+ Print PDFGo to Home Screen
@@ -3486,7 +3486,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Open Project
- Deschide Proiect
+ Deschide ProiectSettings
@@ -3502,7 +3502,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Select template below
- Seletează șablonul de mai jos
+ Seletează șablonul de mai josActivating positioning service
@@ -3526,7 +3526,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Add Bookmark at Coordinates
- Adăugați Semn de Carte la Coordonate
+ Adăugați Semn de Carte la CoordonateUntitled bookmark
@@ -3534,7 +3534,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Set Coordinates as Destination
- Setați Coordonate ca Destinație
+ Setați Coordonate ca DestinațieCopy Coordinates
@@ -3542,11 +3542,11 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3558,27 +3558,27 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
0.25m Precision
- Precizie 0.25m
+ Precizie 0.25m0.5m Precision
- Precizie 0.5m
+ Precizie 0.5m1m Precision
- Precizie 1m
+ Precizie 1m2.5m Precision
- Precizie 2.5m
+ Precizie 2.5m5m Precision
- Precizie 5m
+ Precizie 5m10m Precision
- Precizie 10m
+ Precizie 10mAlways Show Precise View
@@ -3606,7 +3606,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Set As Destination
- Setează ca Destinație
+ Setează ca DestinațieNavigation Options
@@ -3642,11 +3642,11 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Center to Current Location
- Centrează pe Locația Curentă
+ Centrează pe Locația CurentăAdd Bookmark at Current Location
- Adăugați un Semn de Carte la Locația Curentă
+ Adăugați un Semn de Carte la Locația CurentăCurrent location unknown
@@ -3658,7 +3658,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Copy Current Location
- Copiază Locația Curentă
+ Copiază Locația CurentăAccuracy
@@ -3686,7 +3686,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Logged out
- Deconectat
+ DeconectatConnecting...
@@ -3694,7 +3694,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Logged in
- Autentificat
+ AutentificatProject %1 failed to download
@@ -3718,7 +3718,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Positioning error: %1
- Eroare de poziționare: %1
+ Eroare de poziționare: %1Azimuth
@@ -3730,7 +3730,7 @@ Anulați pentru a efectua o scanare minimă a dispozitivului.
Print to Image
- Generează Imagine
+ Generează ImaginePrinting...
diff --git a/i18n/qfield_ru.ts b/i18n/qfield_ru.ts
index ccb709d642..54129f04ba 100644
--- a/i18n/qfield_ru.ts
+++ b/i18n/qfield_ru.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Используемое устройство позиционирования:
+ Используемое устройство позиционирования:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Поиск
+ ПоискMake a full service discovery
@@ -163,7 +163,7 @@ Cancel to make a minimal device scan instead.
Connected to %1
- Подключено к %1
+ Подключено к %1Connect to %1
@@ -171,15 +171,15 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Подключиться к %1
+ Подключиться к %1Connecting to %1
- Подключение к %1
+ Подключение к %1Use orthometric altitude from device
- Использовать ортометрическую высоту , полученную с устройства
+ Использовать ортометрическую высоту , полученную с устройстваSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancel to make a minimal device scan instead.
N/A
- Н/Д
+ Н/ДBluetooth device address:
@@ -210,7 +210,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- Внутренний датчик
+ Внутренний датчик
@@ -287,19 +287,19 @@ Cancel to make a minimal device scan instead.
Lon
- Долгота
+ ДолготаLat
- Широта
+ ШиротаX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancel to make a minimal device scan instead.
Hours
- Часы
+ ЧасыMinutes
- Минуты
+ МинутыSeconds
- Секунды
+ СекундыOK
- Подтвердить
+ Подтвердить
@@ -616,7 +616,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- Последние изменения не сохранены
+ Последние изменения не сохраненыSuccessfully duplicated feature
@@ -820,7 +820,7 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Перейти к %1 %2 (СК карты)
+ Перейти к %1 %2 (СК карты)Set navigation point
@@ -828,7 +828,7 @@ The features geometries will be combined into feature '%1', which will
Go to %1° %2° (WGS84)
- Перейти к %1° %2° (WGS84)
+ Перейти к %1° %2° (WGS84)Go to coordinate
@@ -917,7 +917,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- Обновить данные
+ Обновить данныеReload of layer %1 triggered
@@ -937,11 +937,11 @@ The features geometries will be combined into feature '%1', which will
Read-Only Layer
- Слой только для чтения
+ Слой только для чтенияGeometry Locked Layer
- Слой с фиксацией геометрии
+ Слой с фиксацией геометрииThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1010,7 +1010,7 @@ The features geometries will be combined into feature '%1', which will
Cannot add new feature in layer "%1".
- Невозможно добавить новый объект в слой "%1".
+ Невозможно добавить новый объект в слой "%1".
@@ -1086,18 +1086,18 @@ The features geometries will be combined into feature '%1', which will
LocatorItemSearch…
- Поиск...
+ Поиск...LocatorSettingsSearch Settings
- Настройки поиска
+ Настройки поискаTrigger without its prefix
- Включить без префикса
+ Включить без префиксаSearch Bar Settings
@@ -1226,15 +1226,15 @@ The features geometries will be combined into feature '%1', which will
Printing atlas feature(s) to PDF
- Печать объекта(ов) в PDF
+ Печать объекта(ов) в PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Объект(ы) атласа успешно напечатан(ы) в PDF и сохранен(ы) в ваших документах
+ Объект(ы) атласа успешно напечатан(ы) в PDF и сохранен(ы) в ваших документахPrint Atlas Feature(s) to Image
- Распечатать
+ РаспечататьPrint Atlas Feature to Image
@@ -1257,7 +1257,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- Шир.
+ Шир.X
@@ -1265,7 +1265,7 @@ The features geometries will be combined into feature '%1', which will
Lon.
- Дол.
+ Дол.centroid
@@ -1334,7 +1334,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- Последние изменения не сохранены
+ Последние изменения не сохраненыConstraints not valid
@@ -1345,15 +1345,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- Выберите файл
+ Выберите файлJPEG images (*.jpg *.jpeg)
- JPEG изображения (*.jpg *.jpeg)
+ JPEG изображения (*.jpg *.jpeg)Failed to save gallery picture
- Не удалось сохранить изображение в галлерею
+ Не удалось сохранить изображение в галлереюOpen File
@@ -1416,71 +1416,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- Шир.
+ Шир.N/A
- Н/Д
+ Н/ДX
- X
+ XLon.
- Дол.
+ Дол.Lon
- Долгота
+ ДолготаY
- Y
+ YLat
- Широта
+ ШиротаAltitude
- Высота
+ ВысотаSpeed
- Скорость
+ СкоростьH. Accuracy
- Гор. точность
+ Гор. точностьV. Accuracy
- Верт. точность
+ Верт. точностьPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Действительный
+ ДействительныйFix
- Фиксированный
+ ФиксированныйQuality
- Качество
+ Качество
@@ -1680,7 +1680,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- Не удалось войти
+ Не удалось войтиFailed to sign in
@@ -1722,15 +1722,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- Выйти
+ ВыйтиLogging in, please wait
- Вход в систему, пожалуйста, подождите
+ Вход в систему, пожалуйста, подождитеLogin
- Авторизоваться
+ АвторизоватьсяThe easiest way to transfer you project from QGIS to your devices!
@@ -1745,11 +1745,11 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Проблемная упаковка слоя QFieldCloud
+ Проблемная упаковка слоя QFieldCloudSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Некоторые слои не были правильно упакованы в QFieldCloud. Эти слои могут быть неправильно настроены или их источник данных недоступен с сервера QFieldCloud.
+ Некоторые слои не были правильно упакованы в QFieldCloud. Эти слои могут быть неправильно настроены или их источник данных недоступен с сервера QFieldCloud.QFieldCloud had troubles packaging your project
@@ -1860,7 +1860,7 @@ The features geometries will be combined into feature '%1', which will
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Отменить все измененные объекты в локальных облачных слоях. Вы не можете восстановить эти изменения.
+ Отменить все измененные объекты в локальных облачных слоях. Вы не можете восстановить эти изменения.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1908,7 +1908,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- %n вложение загружается в фоновом режиме%n вложения загружаются в фоновом режиме%n вложений загружаются в фоновом режиме %n вложений загружаются в фоновом режиме
+ %n вложение загружается в фоновом режиме%n вложения загружаются в фоновом режиме%n вложений загружаются в фоновом режиме %n вложений загружаются в фоновом режимеShould local changes be reverted?
@@ -1943,29 +1943,29 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Ошибка экспорта
+ Ошибка экспортаPackaged layer '%1' is not valid: '%2'
- Упакованный слой '%1' недействителен: '%2'
+ Упакованный слой '%1' недействителен: '%2'Failed to open temporary file for "%1", reason:
%2
- Не удалось открыть временный файл для "%1", причина: %2
+ Не удалось открыть временный файл для "%1", причина: %2Failed to upload attachment stored at "%1", reason:
%2
- Не удалось загрузить вложение, хранящееся в "%1", причина: %2
+ Не удалось загрузить вложение, хранящееся в "%1", причина: %2Failed to download file "%1", reason:
- Не удалось загрузить файл "%1", причина:
+ Не удалось загрузить файл "%1", причина:Failed to write downloaded file stored at "%1", fs reason:
- Не удалось записать загруженный файл, хранящийся в "%1", причина ошибки:
+ Не удалось записать загруженный файл, хранящийся в "%1", причина ошибки:aborted
@@ -2320,7 +2320,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Если этот параметр включен, яркость экрана будет уменьшена после 20 секунд бездействия для сохранения заряда батареи.
+ Если этот параметр включен, яркость экрана будет уменьшена после 20 секунд бездействия для сохранения заряда батареи.Consider mouse as a touchscreen device
@@ -2376,36 +2376,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Поиск связанных устройств
+ Поиск связанных устройствScanning failed: %1
- Не удалось провести поиск: %1
+ Не удалось провести поиск: %1Scanning done
- Поиск завершён
+ Поиск завершён%n device(s) found
- %n устройство найдено%n устройства найдены%n устройств найдено%n устройств(а) найдены
+ %n устройство найдено%n устройства найдены%n устройств найдено%n устройств(а) найденыScanning canceled
- Поиск отменён
+ Поиск отменёнScan
- Поиск
+ ПоискMake a full service discovery
- Произвести полное сканирование
+ Произвести полное сканированиеA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Полный поиск устройств может занят долгое время. Вы действительно хотите выполнить его?
+ Полный поиск устройств может занят долгое время. Вы действительно хотите выполнить его?
Отмените чтобы вместо этого выполнить минимальный поиск устройств.
@@ -2414,7 +2414,7 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Подключиться к %1
+ Подключиться к %1Connecting to %1
@@ -2474,7 +2474,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Значения координаты Z, записанные с устройства позиционирования, будут скорректированы с учётом этого значения. Если ввести значение 1,6, это приведет к поправке -1,6 для каждого записанного значения.
+ Значения координаты Z, записанные с устройства позиционирования, будут скорректированы с учётом этого значения. Если ввести значение 1,6, это приведет к поправке -1,6 для каждого записанного значения. Skip altitude correction
@@ -2772,7 +2772,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- Загрузка шрифта %1
+ Загрузка шрифта %1
@@ -2833,7 +2833,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Вращение карты не поддерживается. Сброс с %1 на 0.
+ Вращение карты не поддерживается. Сброс с %1 на 0.
@@ -2937,7 +2937,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Подготовка QField, это одноразовая операция, которая займёт некоторое время
+ Подготовка QField, это одноразовая операция, которая займёт некоторое время
@@ -3044,11 +3044,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- Записывать когда выполняются оба активных ограничения
+ Записывать когда выполняются оба активных ограниченияWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Если включено, вершины будут записываться только при выполнении обоих активных ограничений. Если параметр отключен, выполнение отдельных ограничений приведет к добавлению вершин.
+ Если включено, вершины будут записываться только при выполнении обоих активных ограничений. Если параметр отключен, выполнение отдельных ограничений приведет к добавлению вершин.Start tracking
@@ -3056,7 +3056,7 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- Невозможно начать трек с пустыми значениями
+ Невозможно начать трек с пустыми значениямиWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
@@ -3255,11 +3255,11 @@ Cancel to make a minimal device scan instead.
Base map project
- Базовый проект
+ Базовый проектBase Map Project
- Базовый Проект
+ Базовый ПроектRemove from Recent Projects
@@ -3267,7 +3267,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Добро пожаловать в QField! Пользуетесь приложением впервые? Ознакомьтесь с примерами проектов, приведёнными ниже.
+ Добро пожаловать в QField! Пользуетесь приложением впервые? Ознакомьтесь с примерами проектов, приведёнными ниже. Welcome back to QField.
@@ -3437,11 +3437,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- Определение местоположения включено
+ Определение местоположения включеноPositioning turned off
- Определение местоположения отключено
+ Определение местоположения отключеноCanvas stopped following location
@@ -3469,7 +3469,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- Печать в PDF
+ Печать в PDFGo to Home Screen
@@ -3481,7 +3481,7 @@ Cancel to make a minimal device scan instead.
Open Project
- Открыть проект
+ Открыть проектSettings
@@ -3497,7 +3497,7 @@ Cancel to make a minimal device scan instead.
Select template below
- Выберите шаблон ниже
+ Выберите шаблон нижеActivating positioning service
@@ -3537,11 +3537,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3601,7 +3601,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- Установить в качестве пункта назначения
+ Установить в качестве пункта назначенияNavigation Options
@@ -3637,7 +3637,7 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- Центрирую на текущее местоположение
+ Центрирую на текущее местоположениеAdd Bookmark at Current Location
@@ -3681,7 +3681,7 @@ Cancel to make a minimal device scan instead.
Logged out
- Выйти из
+ Выйти изConnecting...
@@ -3689,7 +3689,7 @@ Cancel to make a minimal device scan instead.
Logged in
- Войти в
+ Войти вProject %1 failed to download
diff --git a/i18n/qfield_sl.ts b/i18n/qfield_sl.ts
index 1e4ca1202d..c195c72d42 100644
--- a/i18n/qfield_sl.ts
+++ b/i18n/qfield_sl.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Naprava za določanje položaja v uporabi:
+ Naprava za določanje položaja v uporabi:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Skeniranje
+ SkeniranjeMake a full service discovery
@@ -162,23 +162,23 @@ Cancel to make a minimal device scan instead.
Connected to %1
- Povezan z %1
+ Povezan z %1Connect to %1
- Poveži se z %1
+ Poveži se z %1Connect to %1
- Poveži se z %1
+ Poveži se z %1Connecting to %1
- Povezovanje z %1
+ Povezovanje z %1Use orthometric altitude from device
- Uporabi ortometrično višino iz naprave
+ Uporabi ortometrično višino iz napraveSelect the Bluetooth device from the list below:
@@ -190,7 +190,7 @@ Cancel to make a minimal device scan instead.
N/A
- Ni na voljo
+ Ni na voljoBluetooth device address:
@@ -209,7 +209,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- Notranja naprava
+ Notranja naprava
@@ -232,7 +232,7 @@ Cancel to make a minimal device scan instead.
Could not find the remote host
- Oddaljenega gostitelja ni bilo mogoče najti
+ Oddaljenega gostitelja ni bilo mogoče najti Could not find the service UUID on remote host
@@ -244,7 +244,7 @@ Cancel to make a minimal device scan instead.
The protocol is not supported on this platform
- Protokol ni podprt na tej platformi
+ Protokol ni podprt na tej platformiAn operation was attempted while the socket was in a state that did not permit it
@@ -252,11 +252,11 @@ Cancel to make a minimal device scan instead.
The remote host closed the connection
- Oddaljeni gostitelj je zaprl povezavo
+ Oddaljeni gostitelj je zaprl povezavoUnknown error
- Neznana napaka
+ Neznana napaka
@@ -286,19 +286,19 @@ Cancel to make a minimal device scan instead.
Lon
- Lon
+ LonLat
- Lat
+ LatX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -425,19 +425,19 @@ Cancel to make a minimal device scan instead.
Hours
- Ure
+ UreMinutes
- Minute
+ MinuteSeconds
- Sekunde
+ SekundeOK
- V redu
+ V redu
@@ -615,7 +615,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- Zadnje spremembe so zavržene
+ Zadnje spremembe so zavrženeSuccessfully duplicated feature
@@ -738,7 +738,7 @@ The features geometries will be combined into feature '%1', which will
Set feature as navigation
- Nastavi objekt kot navigacijo
+ Nastavi objekt kot navigacijoFeature has no geometry
@@ -810,7 +810,7 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Pojdi na %1 %2 (RKS karte)
+ Pojdi na %1 %2 (RKS karte)Set navigation point
@@ -818,7 +818,7 @@ The features geometries will be combined into feature '%1', which will
Go to %1° %2° (WGS84)
- Pojdi na %1° %2° (WGS84)
+ Pojdi na %1° %2° (WGS84)Go to coordinate
@@ -907,7 +907,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- Ponovno naloži podatke
+ Ponovno naloži podatkeReload of layer %1 triggered
@@ -927,7 +927,7 @@ The features geometries will be combined into feature '%1', which will
Read-Only Layer
- Sloj samo za branje
+ Sloj samo za branjeGeometry Locked Layer
@@ -1073,14 +1073,14 @@ The features geometries will be combined into feature '%1', which will
LocatorItemSearch…
- Iskanje...
+ Iskanje...LocatorSettingsSearch Settings
- Nastavitev iskanja
+ Nastavitev iskanjaTrigger without its prefix
@@ -1244,7 +1244,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- Lat.
+ Lat.X
@@ -1252,11 +1252,11 @@ The features geometries will be combined into feature '%1', which will
Lon.
- Lon.
+ Lon.centroid
- centroid
+ centroidLon
@@ -1321,7 +1321,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- Zadnje spremembe so zavržene
+ Zadnje spremembe so zavrženeConstraints not valid
@@ -1332,7 +1332,7 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- Izberi medijsko datoteko
+ Izberi medijsko datotekoJPEG images (*.jpg *.jpeg)
@@ -1403,63 +1403,63 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- Lat.
+ Lat.N/A
- N/V
+ N/VX
- X
+ XLon.
- Lon.
+ Lon.Lon
- Lon
+ LonY
- Y
+ YLat
- Lat
+ LatAltitude
- Nadmorska višina
+ Nadmorska višinaSpeed
- Hitrost
+ HitrostH. Accuracy
- H natančnost
+ H natančnostV. Accuracy
- V natančnost
+ V natančnostPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Veljaven
+ VeljavenFix
@@ -1667,7 +1667,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- Prijava ni uspela
+ Prijava ni uspelaFailed to sign in
@@ -1708,15 +1708,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- Odjava
+ OdjavaLogging in, please wait
- Prijavljanje, prosim počakajte
+ Prijavljanje, prosim počakajteLogin
- Prijava
+ PrijavaThe easiest way to transfer you project from QGIS to your devices!
@@ -1927,7 +1927,7 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Izvoz ni uspel
+ Izvoz ni uspelPackaged layer '%1' is not valid: '%2'
@@ -2360,15 +2360,15 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Iskanje sezanjenih naprav
+ Iskanje sezanjenih napravScanning failed: %1
- Skeniranje ni uspelo: %1
+ Skeniranje ni uspelo: %1Scanning done
- Skeniranje končano
+ Skeniranje končano%n device(s) found
@@ -2376,11 +2376,11 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning canceled
- Skeniranje preklicano
+ Skeniranje preklicanoScan
- Skeniranje
+ SkeniranjeMake a full service discovery
@@ -2397,7 +2397,7 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Povežite se z %1
+ Povežite se z %1Connecting to %1
@@ -2755,7 +2755,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- Nalaganje pisave %1
+ Nalaganje pisave %1
@@ -2816,7 +2816,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Vrtenje karte ni podprto. Ponastavitev iz %1 na 0.
+ Vrtenje karte ni podprto. Ponastavitev iz %1 na 0.
@@ -2920,7 +2920,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Pripravljamo QField, to je enkratna operacija, ki lahko traja nekaj časa
+ Pripravljamo QField, to je enkratna operacija, ki lahko traja nekaj časa
@@ -3039,7 +3039,7 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- Sledenja ni mogoče začeti s praznimi vrednostmi
+ Sledenja ni mogoče začeti s praznimi vrednostmiWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
@@ -3238,11 +3238,11 @@ Cancel to make a minimal device scan instead.
Base map project
- Projekt osnovne karte
+ Projekt osnovne karteBase Map Project
- Projekt osnovne karte
+ Projekt osnovne karteRemove from Recent Projects
@@ -3250,7 +3250,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Dobrodošli v QField-u. Prvič uporabljaš to aplikacijo? Preizkusi spodaj navedene vzorčne projekte.
+ Dobrodošli v QField-u. Prvič uporabljaš to aplikacijo? Preizkusi spodaj navedene vzorčne projekte.Welcome back to QField.
@@ -3420,11 +3420,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- Določanje lokacije aktivirano
+ Določanje lokacije aktiviranoPositioning turned off
- Določanje lokacije izklopljeno
+ Določanje lokacije izklopljenoCanvas stopped following location
@@ -3452,7 +3452,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- Tiskanje v PDF
+ Tiskanje v PDFGo to Home Screen
@@ -3464,7 +3464,7 @@ Cancel to make a minimal device scan instead.
Open Project
- Odpri projekt
+ Odpri projektSettings
@@ -3480,7 +3480,7 @@ Cancel to make a minimal device scan instead.
Select template below
- Izberi predlogo spodaj
+ Izberi predlogo spodajActivating positioning service
@@ -3504,7 +3504,7 @@ Cancel to make a minimal device scan instead.
Add Bookmark at Coordinates
- Dodaj zaznamek na koordinate
+ Dodaj zaznamek na koordinateUntitled bookmark
@@ -3512,7 +3512,7 @@ Cancel to make a minimal device scan instead.
Set Coordinates as Destination
- Nastavi koordinate kot cilj
+ Nastavi koordinate kot ciljCopy Coordinates
@@ -3520,11 +3520,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3536,27 +3536,27 @@ Cancel to make a minimal device scan instead.
0.25m Precision
- Natančnost 0.25m
+ Natančnost 0.25m0.5m Precision
- Natančnost 0.5m
+ Natančnost 0.5m1m Precision
- Natančnost 1m
+ Natančnost 1m2.5m Precision
- Natančnost 2.5m
+ Natančnost 2.5m5m Precision
- Natančnost 5m
+ Natančnost 5m10m Precision
- Natančnost 10m
+ Natančnost 10mAlways Show Precise View
@@ -3584,7 +3584,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- Nastavi kot cilj
+ Nastavi kot ciljNavigation Options
@@ -3620,11 +3620,11 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- Postavi trenutno lokacijo v središče
+ Postavi trenutno lokacijo v središčeAdd Bookmark at Current Location
- Dodaj zaznamek na trenutno lokacijo
+ Dodaj zaznamek na trenutno lokacijoCurrent location unknown
@@ -3636,7 +3636,7 @@ Cancel to make a minimal device scan instead.
Copy Current Location
- Kopiraj trenutno lokacijo
+ Kopiraj trenutno lokacijoAccuracy
@@ -3664,7 +3664,7 @@ Cancel to make a minimal device scan instead.
Logged out
- Odjavljen
+ OdjavljenConnecting...
@@ -3672,7 +3672,7 @@ Cancel to make a minimal device scan instead.
Logged in
- Prijavljen
+ PrijavljenProject %1 failed to download
@@ -3696,7 +3696,7 @@ Cancel to make a minimal device scan instead.
Positioning error: %1
- Napaka pri določanju lokacije: %1
+ Napaka pri določanju lokacije: %1Azimuth
@@ -3708,7 +3708,7 @@ Cancel to make a minimal device scan instead.
Print to Image
- Tiskanje v sliko
+ Tiskanje v slikoPrinting...
diff --git a/i18n/qfield_tr.ts b/i18n/qfield_tr.ts
index 6c96f083de..d7ca2d2e06 100644
--- a/i18n/qfield_tr.ts
+++ b/i18n/qfield_tr.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Konumlandırma cihazı kullanımda:
+ Konumlandırma cihazı kullanımda:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Tara
+ TaraMake a full service discovery
@@ -163,23 +163,23 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
Connected to %1
- %1'e bağlandı
+ %1'e bağlandıConnect to %1
- %1'e bağlan
+ %1'e bağlanConnect to %1
- %1'e bağlan
+ %1'e bağlanConnecting to %1
- %1'e bağlanılıyor
+ %1'e bağlanılıyorUse orthometric altitude from device
- Cihazdan ortometrik yüksekliği kullan
+ Cihazdan ortometrik yüksekliği kullanSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
N/A
- Geçerli değil
+ Geçerli değilBluetooth device address:
@@ -210,7 +210,7 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
BluetoothDeviceModelInternal device
- Dahili cihaz
+ Dahili cihaz
@@ -287,19 +287,19 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
Lon
- Boylam
+ BoylamLat
- Enlem
+ EnlemX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
Hours
- Saat
+ SaatMinutes
- Dakika
+ DakikaSeconds
- Saniye
+ SaniyeOK
- Tamam
+ Tamam
@@ -605,7 +605,7 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
Last changes discarded
- Son değişiklikler uygulanmadı
+ Son değişiklikler uygulanmadıSuccessfully duplicated feature
@@ -801,7 +801,7 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Git %1 %2 (Harita CRS)
+ Git %1 %2 (Harita CRS)Set navigation point
@@ -809,7 +809,7 @@ The features geometries will be combined into feature '%1', which will
Go to %1° %2° (WGS84)
- Git %1° %2° (WGS84)
+ Git %1° %2° (WGS84)Go to coordinate
@@ -898,7 +898,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- Veriyi yeniden yükle
+ Veriyi yeniden yükleReload of layer %1 triggered
@@ -1161,11 +1161,11 @@ The features geometries will be combined into feature '%1', which will
Printing atlas feature(s) to PDF
- Atlas obje(ler)i PDF'e yazdırılıyor
+ Atlas obje(ler)i PDF'e yazdırılıyorAtlas feature(s) successfully printed to PDF and placed in your documents
- Atlas özellik(ler)i başarıyla PDF olarak yazdırıldı ve belgelerinize yerleştirildi
+ Atlas özellik(ler)i başarıyla PDF olarak yazdırıldı ve belgelerinize yerleştirildiPrint Atlas Feature(s) to Image
@@ -1192,7 +1192,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- Enlem
+ EnlemX
@@ -1200,7 +1200,7 @@ The features geometries will be combined into feature '%1', which will
Lon.
- Boylam
+ Boylamcentroid
@@ -1262,7 +1262,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- Son değişiklikler uygulanmadı
+ Son değişiklikler uygulanmadıConstraints not valid
@@ -1273,15 +1273,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- Medya Dosyasını Seç
+ Medya Dosyasını SeçJPEG images (*.jpg *.jpeg)
- JPEG görüntüleri (*.jpg *.jpeg)
+ JPEG görüntüleri (*.jpg *.jpeg)Failed to save gallery picture
- Görüntü galeriye kaydedilemedi
+ Görüntü galeriye kaydedilemediOpen File
@@ -1344,71 +1344,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- Enlem
+ EnlemN/A
- Geçerli değil
+ Geçerli değilX
- X
+ XLon.
- Boylam
+ BoylamLon
- Boylam
+ BoylamY
- Y
+ YLat
- Enlem
+ EnlemAltitude
- Yükseklik
+ YükseklikSpeed
- Hız
+ HızH. Accuracy
- Yatay doğruluk
+ Yatay doğrulukV. Accuracy
- Dikey doğruluk
+ Dikey doğrulukPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Geçerli
+ GeçerliFix
- Düzelt
+ DüzeltQuality
- Kalite
+ Kalite
@@ -2281,15 +2281,15 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Eşleştirilmiş cihazlar taranıyor
+ Eşleştirilmiş cihazlar taranıyorScanning failed: %1
- Tarama başarısız: %1
+ Tarama başarısız: %1Scanning done
- Tarama tamamlandı
+ Tarama tamamlandı%n device(s) found
@@ -2297,20 +2297,20 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning canceled
- Tarama iptal edildi
+ Tarama iptal edildiScan
- Tara
+ TaraMake a full service discovery
- Tam hizmet keşfi yapın
+ Tam hizmet keşfi yapınA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Tam cihaz taraması daha uzun sürebilir. Gerçekten yapmak istiyor musun?
+ Tam cihaz taraması daha uzun sürebilir. Gerçekten yapmak istiyor musun?
Bunun yerine minimum cihaz taraması yapmak için iptal edin.
@@ -2319,7 +2319,7 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
Connect to %1
- %1'e bağlan
+ %1'e bağlanConnecting to %1
@@ -2609,7 +2609,7 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
Loading font %1
- Font yükleniyor %1
+ Font yükleniyor %1
@@ -2666,7 +2666,7 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Harita Kanvası döndürmeyi desteklemez. %1'den 0'a kadar sıfırlanıyor.
+ Harita Kanvası döndürmeyi desteklemez. %1'den 0'a kadar sıfırlanıyor.
@@ -2770,7 +2770,7 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- QField hazırlanıyor, bu biraz zaman alabilecek tek seferlik bir işlemdir
+ QField hazırlanıyor, bu biraz zaman alabilecek tek seferlik bir işlemdir
@@ -2889,7 +2889,7 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
Cannot start track with empty values
- Boş değerler ile takibe başlanamaz
+ Boş değerler ile takibe başlanamazWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
@@ -3218,11 +3218,11 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
Positioning activated
- Konum servisi aktif edildi
+ Konum servisi aktif edildiPositioning turned off
- Konum servisi kapatıldı
+ Konum servisi kapatıldıCanvas stopped following location
@@ -3250,7 +3250,7 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
Printing to PDF
- PDF'e Yazdır
+ PDF'e YazdırGo to Home Screen
@@ -3262,7 +3262,7 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
Open Project
- Proje aç
+ Proje açSettings
@@ -3318,11 +3318,11 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3418,7 +3418,7 @@ Bunun yerine minimum cihaz taraması yapmak için iptal edin.
Center to Current Location
- Geçerli Konumu Ortala
+ Geçerli Konumu OrtalaAdd Bookmark at Current Location
diff --git a/i18n/qfield_uk.ts b/i18n/qfield_uk.ts
index e0d3b795c0..e43dca0d20 100644
--- a/i18n/qfield_uk.ts
+++ b/i18n/qfield_uk.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- Використовуваний пристрій позиціонування:
+ Використовуваний пристрій позиціонування:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- Сканувати
+ СкануватиMake a full service discovery
@@ -163,23 +163,23 @@ Cancel to make a minimal device scan instead.
Connected to %1
- Підключено до %1
+ Підключено до %1Connect to %1
- Підключіться до %1
+ Підключіться до %1Connect to %1
- Підключіться до %1
+ Підключіться до %1Connecting to %1
- Підключення до %1
+ Підключення до %1Use orthometric altitude from device
- Використовуйте ортометричну висоту з пристрою
+ Використовуйте ортометричну висоту з пристроюSelect the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancel to make a minimal device scan instead.
N/A
- N/A
+ N/ABluetooth device address:
@@ -210,7 +210,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- Внутрішній пристрій
+ Внутрішній пристрій
@@ -233,31 +233,31 @@ Cancel to make a minimal device scan instead.
Could not find the remote host
- Не вдалося знайти віддалений хост
+ Не вдалося знайти віддалений хостCould not find the service UUID on remote host
- Не вдалося знайти UUID служби на віддаленому хості
+ Не вдалося знайти UUID служби на віддаленому хостіAttempt to read or write from socket returned an error
- Спроба читання або запису з сокета повернула помилку
+ Спроба читання або запису з сокета повернула помилкуThe protocol is not supported on this platform
- Протокол не підтримується на цій платформі
+ Протокол не підтримується на цій платформіAn operation was attempted while the socket was in a state that did not permit it
- Була спроба виконати операцію, коли сокет перебував у стані, який її не дозволяв
+ Була спроба виконати операцію, коли сокет перебував у стані, який її не дозволявThe remote host closed the connection
- Віддалений хост закрив з’єднання
+ Віддалений хост закрив з’єднанняUnknown error
- Невідома помилка
+ Невідома помилка
@@ -287,19 +287,19 @@ Cancel to make a minimal device scan instead.
Lon
- Довгота
+ ДовготаLat
- Широта
+ ШиротаX
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancel to make a minimal device scan instead.
Hours
- Години
+ ГодиниMinutes
- Хвилини
+ ХвилиниSeconds
- Секунди
+ СекундиOK
- ОК
+ ОК
@@ -616,7 +616,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- Останні зміни відхилено
+ Останні зміни відхиленоSuccessfully duplicated feature
@@ -748,7 +748,7 @@ The features geometries will be combined into feature '%1', which will
Set feature as navigation
- Установити об'єкт як навігацію
+ Установити об'єкт як навігаціюFeature has no geometry
@@ -820,15 +820,15 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- Перейти до %1 %2 (Карта CRS)
+ Перейти до %1 %2 (Карта CRS)Set navigation point
- Встановити точку навігації
+ Встановити точку навігаціїGo to %1° %2° (WGS84)
- Перейти до %1 %2 (WGS84)
+ Перейти до %1 %2 (WGS84)Go to coordinate
@@ -917,7 +917,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- Оновити дані
+ Оновити даніReload of layer %1 triggered
@@ -937,11 +937,11 @@ The features geometries will be combined into feature '%1', which will
Read-Only Layer
- Шар тільки для читання
+ Шар тільки для читанняGeometry Locked Layer
- Шар з заблокованою геометрією
+ Шар з заблокованою геометрієюThis layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1010,7 +1010,7 @@ The features geometries will be combined into feature '%1', which will
Cannot add new feature in layer "%1".
- Неможливо додати нову функцію в шар "%1".
+ Неможливо додати нову функцію в шар "%1".
@@ -1086,18 +1086,18 @@ The features geometries will be combined into feature '%1', which will
LocatorItemSearch…
- Пошук…
+ Пошук…LocatorSettingsSearch Settings
- Налаштування пошуку
+ Налаштування пошукуTrigger without its prefix
- Тригер без префіксу
+ Тригер без префіксуSearch Bar Settings
@@ -1226,11 +1226,11 @@ The features geometries will be combined into feature '%1', which will
Printing atlas feature(s) to PDF
- Друк об'єкту(ів) в PDF
+ Друк об'єкту(ів) в PDFAtlas feature(s) successfully printed to PDF and placed in your documents
- Об'єкт карти успішно надруковані у форматі PDF та розміщені у ваших документах
+ Об'єкт карти успішно надруковані у форматі PDF та розміщені у ваших документахPrint Atlas Feature(s) to Image
@@ -1257,7 +1257,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- Шир.
+ Шир.X
@@ -1265,11 +1265,11 @@ The features geometries will be combined into feature '%1', which will
Lon.
- Довг.
+ Довг.centroid
- центроїд
+ центроїдLon
@@ -1334,7 +1334,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- Останні зміни відхилено
+ Останні зміни відхиленоConstraints not valid
@@ -1345,15 +1345,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- Виберіть Медіафайл
+ Виберіть МедіафайлJPEG images (*.jpg *.jpeg)
- JPEG зображення (*.jpg *.jpeg)
+ JPEG зображення (*.jpg *.jpeg)Failed to save gallery picture
- Не вдалося зберегти зображення галереї
+ Не вдалося зберегти зображення галереїOpen File
@@ -1416,71 +1416,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- Шир.
+ Шир.N/A
- N/A
+ N/AX
- X
+ XLon.
- Довг.
+ Довг.Lon
- Довгота
+ ДовготаY
- Y
+ YLat
- Широта
+ ШиротаAltitude
- Висота
+ ВисотаSpeed
- Швидкість
+ ШвидкістьH. Accuracy
- Гор. точність
+ Гор. точністьV. Accuracy
- Верт. точність
+ Верт. точністьPDOP
- PDOP
+ PDOPHDOP
- HDOP
+ HDOPVDOP
- VDOP
+ VDOPValid
- Дійсний
+ ДійснийFix
- Виправити
+ ВиправитиQuality
- Якість
+ Якість
@@ -1681,7 +1681,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- Не вдалося ввійти
+ Не вдалося ввійтиFailed to sign in
@@ -1723,15 +1723,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- Вийти
+ ВийтиLogging in, please wait
- Відбувається вхід, будь ласка, зачекайте
+ Відбувається вхід, будь ласка, зачекайтеLogin
- Авторизація
+ АвторизаціяThe easiest way to transfer you project from QGIS to your devices!
@@ -1746,11 +1746,11 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- Проблемне пакування шару QFieldCloud
+ Проблемне пакування шару QFieldCloudSome layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- Деякі шари не були запаковані належним чином у QFieldCloud. Ці шари можуть бути неправильно налаштовані або їх джерело даних недоступне з сервера QFieldCloud.
+ Деякі шари не були запаковані належним чином у QFieldCloud. Ці шари можуть бути неправильно налаштовані або їх джерело даних недоступне з сервера QFieldCloud.QFieldCloud had troubles packaging your project
@@ -1861,7 +1861,7 @@ The features geometries will be combined into feature '%1', which will
Revert all modified features in the local cloud layers. You cannot restore those changes.
- Повернути всі змінені об'єкти в локальних шарах хмари. Ви не можете відновити ці зміни.
+ Повернути всі змінені об'єкти в локальних шарах хмари. Ви не можете відновити ці зміни.The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1909,7 +1909,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- %n вкладених файлів зараз завантажується у фоновому режимі.%n вкладених файлів зараз завантажується у фоновому режимі.%n вкладених файлів зараз завантажується у фоновому режимі.%n вкладених файлів зараз завантажується у фоновому режимі.
+ %n вкладених файлів зараз завантажується у фоновому режимі.%n вкладених файлів зараз завантажується у фоновому режимі.%n вкладених файлів зараз завантажується у фоновому режимі.%n вкладених файлів зараз завантажується у фоновому режимі.Should local changes be reverted?
@@ -1944,31 +1944,31 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- Помилка єкспорту
+ Помилка єкспортуPackaged layer '%1' is not valid: '%2'
- Упакований шар "%1" недійсний: "%2"
+ Упакований шар "%1" недійсний: "%2"Failed to open temporary file for "%1", reason:
%2
- Не вдалося відкрити тимчасовий файл для "%1", причина:
+ Не вдалося відкрити тимчасовий файл для "%1", причина:
%2Failed to upload attachment stored at "%1", reason:
%2
- Не вдалося завантажити вкладений файл, збережений на "%1", причина:
+ Не вдалося завантажити вкладений файл, збережений на "%1", причина:
%2Failed to download file "%1", reason:
- Не вдалося завантажити файл "%1", причина:
+ Не вдалося завантажити файл "%1", причина:Failed to write downloaded file stored at "%1", fs reason:
- Не вдалося записати завантажений файл, збережений у "%1", причина fs:
+ Не вдалося записати завантажений файл, збережений у "%1", причина fs:aborted
@@ -2039,7 +2039,7 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to upload attachment stored at `%1`, reason:
%2
- Не вдалося завантажити вкладений файл, який зберігається в `%1`, причина:
+ Не вдалося завантажити вкладений файл, який зберігається в `%1`, причина:
%2
@@ -2325,7 +2325,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- Якщо ввімкнено, яскравість екрана зменшиться через 20 секунд бездіяльності, щоб зберегти заряд акумулятора.
+ Якщо ввімкнено, яскравість екрана зменшиться через 20 секунд бездіяльності, щоб зберегти заряд акумулятора.Consider mouse as a touchscreen device
@@ -2381,36 +2381,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- Сканування на наявність парних пристроїв
+ Сканування на наявність парних пристроївScanning failed: %1
- Помилка сканування: %1
+ Помилка сканування: %1Scanning done
- Вдале сканування
+ Вдале сканування%n device(s) found
- Знайдено %n пристроївЗнайдено %n пристроївЗнайдено %n пристроївЗнайдено %n пристроїв
+ Знайдено %n пристроївЗнайдено %n пристроївЗнайдено %n пристроївЗнайдено %n пристроївScanning canceled
- Сканування відмінено
+ Сканування відміненоScan
- Сканувати
+ СкануватиMake a full service discovery
- Зробіть повне відкриття сервісу
+ Зробіть повне відкриття сервісуA full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- Повне сканування пристрою може зайняти більше часу. Ти дійсно хочеш це зробити?
+ Повне сканування пристрою може зайняти більше часу. Ти дійсно хочеш це зробити?
Скасуйте, щоб натомість виконати мінімальне сканування пристрою.
@@ -2419,7 +2419,7 @@ Cancel to make a minimal device scan instead.
Connect to %1
- Підключіться до %1
+ Підключіться до %1Connecting to %1
@@ -2479,7 +2479,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- Значення Z, записані з пристрою позиціонування, будуть виправлені цим значенням. Якщо введено значення 1,6, це призведе до виправлення -1,6 для кожного записаного значення.
+ Значення Z, записані з пристрою позиціонування, будуть виправлені цим значенням. Якщо введено значення 1,6, це призведе до виправлення -1,6 для кожного записаного значення.Skip altitude correction
@@ -2777,7 +2777,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- Завантаження шрифту %1
+ Завантаження шрифту %1
@@ -2838,7 +2838,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- Обертання полотна карти не підтримується. Скидання з %1 до 0.
+ Обертання полотна карти не підтримується. Скидання з %1 до 0.
@@ -2942,7 +2942,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- Підготовка QField, це одноразова операція, яка може зайняти деякий час
+ Підготовка QField, це одноразова операція, яка може зайняти деякий час
@@ -3049,11 +3049,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- Записуйте, коли виконано обидва активні обмеження
+ Записуйте, коли виконано обидва активні обмеженняWhen enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- Якщо ввімкнено, вершини записуються лише тоді, коли задовольняються обидва активні обмеження. Якщо налаштування вимкнено, дотримання окремих обмежень призведе до додавання вершин.
+ Якщо ввімкнено, вершини записуються лише тоді, коли задовольняються обидва активні обмеження. Якщо налаштування вимкнено, дотримання окремих обмежень призведе до додавання вершин.Start tracking
@@ -3061,11 +3061,11 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- Неможливо почати відстеження з порожніми значеннями
+ Неможливо почати відстеження з порожніми значеннямиWhen both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- Коли обидва обмеження вимкнено, додавання вершин відбуватиметься так часто, як це надає пристрій позиціонування.
+ Коли обидва обмеження вимкнено, додавання вершин відбуватиметься так часто, як це надає пристрій позиціонування.Measure (M) value attached to vertices:
@@ -3260,11 +3260,11 @@ Cancel to make a minimal device scan instead.
Base map project
- Базова карта проєкту
+ Базова карта проєктуBase Map Project
- Базова карта проєкту
+ Базова карта проєктуRemove from Recent Projects
@@ -3272,7 +3272,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- Ласкаво просимо до QField. Вперше користуєтеся цією програмою? Спробуйте зразки проектів, наведених у списку нижче.
+ Ласкаво просимо до QField. Вперше користуєтеся цією програмою? Спробуйте зразки проектів, наведених у списку нижче.Welcome back to QField.
@@ -3442,11 +3442,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- Позиціонування активоване
+ Позиціонування активованеPositioning turned off
- Позиціонування вимкнено
+ Позиціонування вимкненоCanvas stopped following location
@@ -3474,7 +3474,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- Друкувати в PDF
+ Друкувати в PDFGo to Home Screen
@@ -3486,7 +3486,7 @@ Cancel to make a minimal device scan instead.
Open Project
- Відкрити проект
+ Відкрити проектSettings
@@ -3502,7 +3502,7 @@ Cancel to make a minimal device scan instead.
Select template below
- Виберіть шаблон нижче
+ Виберіть шаблон нижчеActivating positioning service
@@ -3526,7 +3526,7 @@ Cancel to make a minimal device scan instead.
Add Bookmark at Coordinates
- Додати закладку в Координати
+ Додати закладку в КоординатиUntitled bookmark
@@ -3534,7 +3534,7 @@ Cancel to make a minimal device scan instead.
Set Coordinates as Destination
- Встановіть координати як пункт призначення
+ Встановіть координати як пункт призначенняCopy Coordinates
@@ -3542,11 +3542,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3558,27 +3558,27 @@ Cancel to make a minimal device scan instead.
0.25m Precision
- Точність 0.25 м
+ Точність 0.25 м0.5m Precision
- Точність 0.5 м
+ Точність 0.5 м1m Precision
- Точність 1 м
+ Точність 1 м2.5m Precision
- Точність 2.5 м
+ Точність 2.5 м5m Precision
- Точність 5 м
+ Точність 5 м10m Precision
- Точність 10 м
+ Точність 10 мAlways Show Precise View
@@ -3606,7 +3606,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- Встановити як пункт призначення
+ Встановити як пункт призначенняNavigation Options
@@ -3642,11 +3642,11 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- Центр поточного місцезнаходження
+ Центр поточного місцезнаходженняAdd Bookmark at Current Location
- Додати закладку в поточному місці
+ Додати закладку в поточному місціCurrent location unknown
@@ -3658,7 +3658,7 @@ Cancel to make a minimal device scan instead.
Copy Current Location
- Копіювати поточне розташування
+ Копіювати поточне розташуванняAccuracy
@@ -3686,7 +3686,7 @@ Cancel to make a minimal device scan instead.
Logged out
- Вийшов із системи
+ Вийшов із системиConnecting...
@@ -3694,7 +3694,7 @@ Cancel to make a minimal device scan instead.
Logged in
- Авторизован
+ АвторизованProject %1 failed to download
@@ -3718,7 +3718,7 @@ Cancel to make a minimal device scan instead.
Positioning error: %1
- Помилка позиціонування: %1
+ Помилка позиціонування: %1Azimuth
diff --git a/i18n/qfield_zh.ts b/i18n/qfield_zh.ts
index de0d1c0f9b..9447698293 100644
--- a/i18n/qfield_zh.ts
+++ b/i18n/qfield_zh.ts
@@ -125,7 +125,7 @@
BluetoothDeviceChooserPositioning device in use:
- 使用中的定位设备:
+ 使用中的定位设备:Scanning for paired devices
@@ -149,7 +149,7 @@
Scan
- 扫描
+ 扫描Make a full service discovery
@@ -163,23 +163,23 @@ Cancel to make a minimal device scan instead.
Connected to %1
- 已连接%1
+ 已连接%1Connect to %1
- 连接至%1
+ 连接至%1Connect to %1
- 连接至%1
+ 连接至%1Connecting to %1
- 正在连接%1
+ 正在连接%1Use orthometric altitude from device
- 使用设备的垂直海拔
+ 使用设备的垂直海拔Select the Bluetooth device from the list below:
@@ -191,7 +191,7 @@ Cancel to make a minimal device scan instead.
N/A
- 不可用
+ 不可用Bluetooth device address:
@@ -210,7 +210,7 @@ Cancel to make a minimal device scan instead.
BluetoothDeviceModelInternal device
- 内部设备
+ 内部设备
@@ -233,31 +233,31 @@ Cancel to make a minimal device scan instead.
Could not find the remote host
- 未找到远程主机
+ 未找到远程主机Could not find the service UUID on remote host
- 在远程主机上未找到服务UUID
+ 在远程主机上未找到服务UUIDAttempt to read or write from socket returned an error
- 尝试从Socket读取或写入时返回错误
+ 尝试从Socket读取或写入时返回错误The protocol is not supported on this platform
- 此平台不支持该协议
+ 此平台不支持该协议An operation was attempted while the socket was in a state that did not permit it
- 当Socket处于不允许的状态时尝试了操作
+ 当Socket处于不允许的状态时尝试了操作The remote host closed the connection
- 远程主机已关闭连接
+ 远程主机已关闭连接Unknown error
- 未知错误
+ 未知错误
@@ -287,19 +287,19 @@ Cancel to make a minimal device scan instead.
Lon
- 经度
+ 经度Lat
- 纬度
+ 纬度X
- X
+ XY
- Y
+ YBookmark details copied to clipboard
@@ -426,19 +426,19 @@ Cancel to make a minimal device scan instead.
Hours
- 时
+ 时Minutes
- 分
+ 分Seconds
- 秒
+ 秒OK
- 确定
+ 确定
@@ -616,7 +616,7 @@ Cancel to make a minimal device scan instead.
Last changes discarded
- 放弃最后的修改
+ 放弃最后的修改Successfully duplicated feature
@@ -742,7 +742,7 @@ The features geometries will be combined into feature '%1', which will
Set feature as navigation
- 将要素设为导航
+ 将要素设为导航Feature has no geometry
@@ -814,15 +814,15 @@ The features geometries will be combined into feature '%1', which will
GotoLocatorFilterGo to %1 %2 (Map CRS)
- 转到 %1 %2 (地图坐标参照系)
+ 转到 %1 %2 (地图坐标参照系)Set navigation point
- 设置导航点
+ 设置导航点Go to %1° %2° (WGS84)
- 转到 %1° %2° (WGS84)
+ 转到 %1° %2° (WGS84)Go to coordinate
@@ -911,7 +911,7 @@ The features geometries will be combined into feature '%1', which will
Reload data
- 重新加载数据
+ 重新加载数据Reload of layer %1 triggered
@@ -931,11 +931,11 @@ The features geometries will be combined into feature '%1', which will
Read-Only Layer
- 只读图层
+ 只读图层Geometry Locked Layer
- 几何图形锁定图层
+ 几何图形锁定图层This layer is configured as "Read-Only" which disables adding, deleting and editing features.
@@ -1004,7 +1004,7 @@ The features geometries will be combined into feature '%1', which will
Cannot add new feature in layer "%1".
- 无法在图层 "%1" 中添加新要素。
+ 无法在图层 "%1" 中添加新要素。
@@ -1080,18 +1080,18 @@ The features geometries will be combined into feature '%1', which will
LocatorItemSearch…
- 搜索…
+ 搜索…LocatorSettingsSearch Settings
- 搜索设置
+ 搜索设置Trigger without its prefix
- 触发时不带前缀
+ 触发时不带前缀Search Bar Settings
@@ -1220,15 +1220,15 @@ The features geometries will be combined into feature '%1', which will
Printing atlas feature(s) to PDF
- 地图集要素正在输出为PDF文件
+ 地图集要素正在输出为PDF文件Atlas feature(s) successfully printed to PDF and placed in your documents
- 地图集要素已成功输出为PDF文件并保存在您的文档文件夹中
+ 地图集要素已成功输出为PDF文件并保存在您的文档文件夹中Print Atlas Feature(s) to Image
- 地图集要素输出为图像文件
+ 地图集要素输出为图像文件Print Atlas Feature to Image
@@ -1251,7 +1251,7 @@ The features geometries will be combined into feature '%1', which will
NavigationInformationViewLat.
- 纬度
+ 纬度X
@@ -1259,11 +1259,11 @@ The features geometries will be combined into feature '%1', which will
Lon.
- 经度
+ 经度centroid
- 质心
+ 质心Lon
@@ -1328,7 +1328,7 @@ The features geometries will be combined into feature '%1', which will
Last changes discarded
- 放弃最后的修改
+ 放弃最后的修改Constraints not valid
@@ -1339,15 +1339,15 @@ The features geometries will be combined into feature '%1', which will
PlatformUtilitiesSelect Media File
- 选择媒介文件
+ 选择媒介文件JPEG images (*.jpg *.jpeg)
- JPEG图片格式 (*.jpg *.jpeg)
+ JPEG图片格式 (*.jpg *.jpeg)Failed to save gallery picture
- 无法将图片保存到图库
+ 无法将图片保存到图库Open File
@@ -1391,7 +1391,7 @@ The features geometries will be combined into feature '%1', which will
Audio files (*.mp3 *.aac *.ogg)
- 音频文件 (*.mp3 *.aac *.ogg)
+ 音频文件 (*.mp3 *.aac *.ogg)All files (*.*)
@@ -1410,71 +1410,71 @@ The features geometries will be combined into feature '%1', which will
PositionInformationViewLat.
- 纬度
+ 纬度N/A
- 不可用
+ 不可用X
- X
+ XLon.
- 经度
+ 经度Lon
- 经度
+ 经度Y
- Y
+ YLat
- 纬度
+ 纬度Altitude
- 海拔
+ 海拔Speed
- 速度
+ 速度H. Accuracy
- 平面精度
+ 平面精度V. Accuracy
- 高程精度
+ 高程精度PDOP
- 位置精度因子 (PDOP)
+ 位置精度因子 (PDOP)HDOP
- 水平精度因子 (HDOP)
+ 水平精度因子 (HDOP)VDOP
- 垂直精度因子 (VDOP)
+ 垂直精度因子 (VDOP)Valid
- 有效
+ 有效Fix
- 修复
+ 修复Quality
- 高标准
+ 高标准
@@ -1504,7 +1504,7 @@ The features geometries will be combined into feature '%1', which will
Bluetooth
- 蓝牙
+ 蓝牙Bluetooth (NMEA)
@@ -1675,7 +1675,7 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudLoginFailed to login
- 登录失败
+ 登录失败Failed to sign in
@@ -1717,15 +1717,15 @@ The features geometries will be combined into feature '%1', which will
Logout
- 退出登录
+ 退出登录Logging in, please wait
- 正在登录,请稍候
+ 正在登录,请稍候Login
- 登录
+ 登录The easiest way to transfer you project from QGIS to your devices!
@@ -1740,11 +1740,11 @@ The features geometries will be combined into feature '%1', which will
QFieldCloudPackageLayersFeedbackProblematic QFieldCloud layer packaging
- QFieldCloud图层打包存在问题
+ QFieldCloud图层打包存在问题Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.
- QFieldCloud中的某些图层未正确打包。这些图层可能配置错误,或者无法从QFieldCloud服务器访问其数据源。
+ QFieldCloud中的某些图层未正确打包。这些图层可能配置错误,或者无法从QFieldCloud服务器访问其数据源。QFieldCloud had troubles packaging your project
@@ -1855,7 +1855,7 @@ The features geometries will be combined into feature '%1', which will
Revert all modified features in the local cloud layers. You cannot restore those changes.
- 还原本地云图层中所有已修改的要素。您无法恢复这些修改。
+ 还原本地云图层中所有已修改的要素。您无法恢复这些修改。The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.
@@ -1903,7 +1903,7 @@ While you can still view and use the project, it is strongly recommended to rese
%n attachment(s) are currently being uploaded in the background.
- 当前正在后台上传%n个附件。
+ 当前正在后台上传%n个附件。Should local changes be reverted?
@@ -1938,31 +1938,31 @@ While you can still view and use the project, it is strongly recommended to rese
QFieldCloudProjectsModelExport failed
- 导出失败
+ 导出失败Packaged layer '%1' is not valid: '%2'
- 打包图层 '%1' 无效:'%2'
+ 打包图层 '%1' 无效:'%2'Failed to open temporary file for "%1", reason:
%2
- 无法打开"%1"的临时文件,原因:
+ 无法打开"%1"的临时文件,原因:
%2Failed to upload attachment stored at "%1", reason:
%2
- 无法上传存储在"%1"的附件,原因:
+ 无法上传存储在"%1"的附件,原因:
%2Failed to download file "%1", reason:
- 下载文件 "%1" 失败,原因:
+ 下载文件 "%1" 失败,原因:Failed to write downloaded file stored at "%1", fs reason:
- 无法写入存储在 "%1" 的下载文件,FS 原因:
+ 无法写入存储在 "%1" 的下载文件,FS 原因:aborted
@@ -2033,7 +2033,7 @@ While you can still view and use the project, it is strongly recommended to rese
Failed to upload attachment stored at `%1`, reason:
%2
- 无法上传存储在`%1`的附件,原因:
+ 无法上传存储在`%1`的附件,原因:
%2
@@ -2319,7 +2319,7 @@ While you can still view and use the project, it is strongly recommended to rese
If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.
- 如果启用,屏幕亮度将在休止状态 20 秒后变暗,以节省电池的电量。
+ 如果启用,屏幕亮度将在休止状态 20 秒后变暗,以节省电池的电量。Consider mouse as a touchscreen device
@@ -2375,36 +2375,36 @@ While you can still view and use the project, it is strongly recommended to rese
Scanning for paired devices
- 正在扫描配对设备
+ 正在扫描配对设备Scanning failed: %1
- 扫描失败:%1
+ 扫描失败:%1Scanning done
- 完成扫描
+ 完成扫描%n device(s) found
- 找到%n个设备
+ 找到%n个设备Scanning canceled
- 扫描已取消
+ 扫描已取消Scan
- 扫描
+ 扫描Make a full service discovery
- 进行全方位服务探索
+ 进行全方位服务探索A full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.
- 全方位设备扫描可能需要更长时间,您真的想这样做吗?
+ 全方位设备扫描可能需要更长时间,您真的想这样做吗?
取消,进行最少设备扫描。
@@ -2413,7 +2413,7 @@ Cancel to make a minimal device scan instead.
Connect to %1
- 连接%1
+ 连接%1Connecting to %1
@@ -2473,7 +2473,7 @@ Cancel to make a minimal device scan instead.
Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.
- 通过定位设备记录的Z值进行校正。如果输入的值为1.6,则每个记录值修正为-1.6。
+ 通过定位设备记录的Z值进行校正。如果输入的值为1.6,则每个记录值修正为-1.6。Skip altitude correction
@@ -2771,7 +2771,7 @@ Cancel to make a minimal device scan instead.
Loading font %1
- 加载字体 %1
+ 加载字体 %1
@@ -2832,7 +2832,7 @@ Cancel to make a minimal device scan instead.
QgsQuickMapSettingsMap Canvas rotation is not supported. Resetting from %1 to 0.
- 不支持地图画布旋转,正在从%1重置为0。
+ 不支持地图画布旋转,正在从%1重置为0。
@@ -2936,7 +2936,7 @@ Cancel to make a minimal device scan instead.
SystemLoaderPreparing QField, this is a one time operation that might take some time
- 正在准备QField,请稍等
+ 正在准备QField,请稍等
@@ -2978,7 +2978,7 @@ Cancel to make a minimal device scan instead.
The connection was refused by the remote hose
- 远程主机拒绝连接
+ 远程主机拒绝连接UDP receiver error (%1)
@@ -3043,11 +3043,11 @@ Cancel to make a minimal device scan instead.
Record when both active constraints are met
- 当同时激活两个约束时开始记录
+ 当同时激活两个约束时开始记录When enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.
- 启用后,只有在同时激活两个约束时才会记录顶点;如果禁用,满足单个约束将触发增加顶点。
+ 启用后,只有在同时激活两个约束时才会记录顶点;如果禁用,满足单个约束将触发增加顶点。Start tracking
@@ -3055,11 +3055,11 @@ Cancel to make a minimal device scan instead.
Cannot start track with empty values
- 无法通过空值启动跟踪
+ 无法通过空值启动跟踪When both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.
- 当两个约束都被禁用时,顶点添加的频率将与定位设备提供的频率相同。
+ 当两个约束都被禁用时,顶点添加的频率将与定位设备提供的频率相同。Measure (M) value attached to vertices:
@@ -3165,7 +3165,7 @@ Cancel to make a minimal device scan instead.
The connection was refused by the remote hose
- 远程主机拒绝连接
+ 远程主机拒绝连接UDP receiver error (%1)
@@ -3254,11 +3254,11 @@ Cancel to make a minimal device scan instead.
Base map project
- 底图工程文件
+ 底图工程文件Base Map Project
- 底图工程文件
+ 底图工程文件Remove from Recent Projects
@@ -3266,7 +3266,7 @@ Cancel to make a minimal device scan instead.
Welcome to QField. First time using this application? Try out sample projects listed in the list below.
- 欢迎使用QField!是第一次使用本应用吗?试试下方文件列表的一些示例工程吧。
+ 欢迎使用QField!是第一次使用本应用吗?试试下方文件列表的一些示例工程吧。Welcome back to QField.
@@ -3436,11 +3436,11 @@ Cancel to make a minimal device scan instead.
Positioning activated
- 定位功能已激活
+ 定位功能已激活Positioning turned off
- 关闭定位功能
+ 关闭定位功能Canvas stopped following location
@@ -3468,7 +3468,7 @@ Cancel to make a minimal device scan instead.
Printing to PDF
- 输出为PDF文件
+ 输出为PDF文件Go to Home Screen
@@ -3480,7 +3480,7 @@ Cancel to make a minimal device scan instead.
Open Project
- 打开工程
+ 打开工程Settings
@@ -3496,7 +3496,7 @@ Cancel to make a minimal device scan instead.
Select template below
- 请选择模板
+ 请选择模板Activating positioning service
@@ -3520,7 +3520,7 @@ Cancel to make a minimal device scan instead.
Add Bookmark at Coordinates
- 在坐标处添加书签
+ 在坐标处添加书签Untitled bookmark
@@ -3528,7 +3528,7 @@ Cancel to make a minimal device scan instead.
Set Coordinates as Destination
- 将坐标设为目标
+ 将坐标设为目标Copy Coordinates
@@ -3536,11 +3536,11 @@ Cancel to make a minimal device scan instead.
X
- X
+ XY
- Y
+ YCoordinates copied to clipboard
@@ -3552,27 +3552,27 @@ Cancel to make a minimal device scan instead.
0.25m Precision
- 0.25米精度
+ 0.25米精度0.5m Precision
- 0.5米精度
+ 0.5米精度1m Precision
- 1米精度
+ 1米精度2.5m Precision
- 2.5米精度
+ 2.5米精度5m Precision
- 5米精度
+ 5米精度10m Precision
- 10米精度
+ 10米精度Always Show Precise View
@@ -3600,7 +3600,7 @@ Cancel to make a minimal device scan instead.
Set As Destination
- 设为目标
+ 设为目标Navigation Options
@@ -3636,11 +3636,11 @@ Cancel to make a minimal device scan instead.
Center to Current Location
- 居中当前位置
+ 居中当前位置Add Bookmark at Current Location
- 在当前位置添加书签
+ 在当前位置添加书签Current location unknown
@@ -3652,7 +3652,7 @@ Cancel to make a minimal device scan instead.
Copy Current Location
- 复制当前位置
+ 复制当前位置Accuracy
@@ -3680,7 +3680,7 @@ Cancel to make a minimal device scan instead.
Logged out
- 已注销
+ 已注销Connecting...
@@ -3688,7 +3688,7 @@ Cancel to make a minimal device scan instead.
Logged in
- 已登录
+ 已登录Project %1 failed to download
@@ -3712,7 +3712,7 @@ Cancel to make a minimal device scan instead.
Positioning error: %1
- 定位错误: %1
+ 定位错误: %1Azimuth
@@ -3724,7 +3724,7 @@ Cancel to make a minimal device scan instead.
Print to Image
- 输出为图像
+ 输出为图像Printing...