qfield_en.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="en">
<context>
    <name>About</name>
    <message>
        <source>Developed by</source>
        <translation>Developed by</translation>
    </message>
    <message>
        <source>Support QField</source>
        <translation>Support QField</translation>
    </message>
    <message>
        <source>Changelog</source>
        <translation>Changelog</translation>
    </message>
    <message>
        <source>Documentation</source>
        <translation>Documentation</translation>
    </message>
    <message>
        <source>Links Menu</source>
        <translation>Links Menu</translation>
    </message>
</context>
<context>
    <name>AndroidProjectSource</name>
    <message>
        <source>File %1 does not exist</source>
        <translation>File %1 does not exist</translation>
    </message>
</context>
<context>
    <name>AppMissingGridHandler</name>
    <message>
        <source>No transform available between %1 and %2</source>
        <translation>No transform available between %1 and %2</translation>
    </message>
    <message>
        <source>This grid is part of the “&lt;i&gt;%1&lt;/i&gt;” package, available for download from &lt;a href=&quot;%2&quot;&gt;%2&lt;/a&gt;.</source>
        <translation>This grid is part of the “&lt;i&gt;%1&lt;/i&gt;” package, available for download from &lt;a href=&quot;%2&quot;&gt;%2&lt;/a&gt;.</translation>
    </message>
    <message>
        <source>This grid is available for download from &lt;a href=&quot;%1&quot;&gt;%1&lt;/a&gt;.</source>
        <translation>This grid is available for download from &lt;a href=&quot;%1&quot;&gt;%1&lt;/a&gt;.</translation>
    </message>
    <message>
        <source>projection</source>
        <translation>projection</translation>
    </message>
    <message>
        <source>This transformation requires the grid file “%1”, which is not available for use on the system.</source>
        <translation>This transformation requires the grid file “%1”, which is not available for use on the system.</translation>
    </message>
    <message>
        <source>This grid is part of the &lt;i&gt;%1&lt;/i&gt; package, available for download from &lt;a href=&quot;%2&quot;&gt;%2&lt;/a&gt;.</source>
        <translation>This grid is part of the &lt;i&gt;%1&lt;/i&gt; package, available for download from &lt;a href=&quot;%2&quot;&gt;%2&lt;/a&gt;.</translation>
    </message>
    <message>
        <source>&lt;p&gt;Current transform “&lt;i&gt;%1&lt;/i&gt;” has an accuracy of %2 meters, while the preferred transformation “&lt;i&gt;%3&lt;/i&gt;” has accuracy %4 meters.&lt;/p&gt;</source>
        <translation>&lt;p&gt;Current transform “&lt;i&gt;%1&lt;/i&gt;” has an accuracy of %2 meters, while the preferred transformation “&lt;i&gt;%3&lt;/i&gt;” has accuracy %4 meters.&lt;/p&gt;</translation>
    </message>
    <message>
        <source>&lt;p&gt;Current transform “&lt;i&gt;%1&lt;/i&gt;” has an unknown accuracy, while the preferred transformation “&lt;i&gt;%2&lt;/i&gt;” has accuracy %3 meters.&lt;/p&gt;</source>
        <translation>&lt;p&gt;Current transform “&lt;i&gt;%1&lt;/i&gt;” has an unknown accuracy, while the preferred transformation “&lt;i&gt;%2&lt;/i&gt;” has accuracy %3 meters.&lt;/p&gt;</translation>
    </message>
    <message>
        <source>&lt;p&gt;The preferred transform between &lt;i&gt;%1&lt;/i&gt; and &lt;i&gt;%2&lt;/i&gt; is not available for use on the system.&lt;/p&gt;</source>
        <translation>&lt;p&gt;The preferred transform between &lt;i&gt;%1&lt;/i&gt; and &lt;i&gt;%2&lt;/i&gt; is not available for use on the system.&lt;/p&gt;</translation>
    </message>
    <message>
        <source>No transform is available between &lt;i&gt;%1&lt;/i&gt; and &lt;i&gt;%2&lt;/i&gt;.&lt;p style=&quot;color: red&quot;&gt;%3&lt;/p&gt;</source>
        <translation>No transform is available between &lt;i&gt;%1&lt;/i&gt; and &lt;i&gt;%2&lt;/i&gt;.&lt;p style=&quot;color: red&quot;&gt;%3&lt;/p&gt;</translation>
    </message>
    <message>
        <source>Cannot use project transform between %1 and %2</source>
        <translation>Cannot use project transform between %1 and %2</translation>
    </message>
    <message>
        <source>Used a ballpark transform from %1 to %2</source>
        <translation>Used a ballpark transform from %1 to %2</translation>
    </message>
</context>
<context>
    <name>AttributeFormModelBase</name>
    <message>
        <source>Expression constraint</source>
        <translation>Expression constraint</translation>
    </message>
    <message>
        <source>Not NULL</source>
        <translation>Not NULL</translation>
    </message>
    <message>
        <source>Unique</source>
        <translation>Unique</translation>
    </message>
</context>
<context>
    <name>BadLayerItem</name>
    <message>
        <source>Unable to load some layers</source>
        <translation>Unable to load some layers</translation>
    </message>
    <message>
        <source>The following layers could not be loaded, please review those and reconfigure the QGIS project.</source>
        <translation>The following layers could not be loaded, please review those and reconfigure the QGIS project.</translation>
    </message>
    <message>
        <source>You may check the Portable Project section in the QField documentation for more help.</source>
        <translation>You may check the Portable Project section in the QField documentation for more help.</translation>
    </message>
</context>
<context>
    <name>BarcodeReader</name>
    <message>
        <source>Code Reader</source>
        <translation>Code Reader</translation>
    </message>
    <message>
        <source>Center your camera on a code</source>
        <translation>Center your camera on a code</translation>
    </message>
</context>
<context>
    <name>BluetoothDeviceChooser</name>
    <message>
        <source>Positioning device in use:</source>
        <translation>Positioning device in use:</translation>
    </message>
    <message>
        <source>Scanning for paired devices</source>
        <translation>Scanning for paired devices</translation>
    </message>
    <message>
        <source>Scanning failed: %1</source>
        <translation>Scanning failed: %1</translation>
    </message>
    <message>
        <source>Scanning done</source>
        <translation>Scanning done</translation>
    </message>
    <message numerus="yes">
        <source>%n device(s) found</source>
        <translation>
            <numerusform>%n device(s) found</numerusform>
            <numerusform>%n device(s) found</numerusform>
        </translation>
    </message>
    <message>
        <source>Scanning canceled</source>
        <translation>Scanning canceled</translation>
    </message>
    <message>
        <source>Scan</source>
        <translation>Scan</translation>
    </message>
    <message>
        <source>Make a full service discovery</source>
        <translation>Make a full service discovery</translation>
    </message>
    <message>
        <source>A full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.</source>
        <translation>A full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.</translation>
    </message>
    <message>
        <source>Connected to %1</source>
        <translation>Connected to %1</translation>
    </message>
    <message>
        <source>Connect to %1</source>
        <translation>Connect to %1</translation>
    </message>
    <message>
        <source>Connect  to %1</source>
        <translation>Connect  to %1</translation>
    </message>
    <message>
        <source>Connecting to %1</source>
        <translation>Connecting to %1</translation>
    </message>
    <message>
        <source>Use orthometric altitude from device</source>
        <translation>Use orthometric altitude from device</translation>
    </message>
    <message>
        <source>Select the Bluetooth device from the list below:</source>
        <translation>Select the Bluetooth device from the list below:</translation>
    </message>
    <message>
        <source>Bluetooth device name:</source>
        <translation>Bluetooth device name:</translation>
    </message>
    <message>
        <source>N/A</source>
        <translation>N/A</translation>
    </message>
    <message>
        <source>Bluetooth device address:</source>
        <translation>Bluetooth device address:</translation>
    </message>
    <message>
        <source>Scan for nearby devices</source>
        <translation>Scan for nearby devices</translation>
    </message>
    <message>
        <source>No Bluetooth devices detected, scan to populate nearby devices.</source>
        <translation>No Bluetooth devices detected, scan to populate nearby devices.</translation>
    </message>
</context>
<context>
    <name>BluetoothDeviceModel</name>
    <message>
        <source>Internal device</source>
        <translation>Internal device</translation>
    </message>
</context>
<context>
    <name>BluetoothReceiver</name>
    <message>
        <source>Connecting…</source>
        <translation>Connecting…</translation>
    </message>
    <message>
        <source>Successfully connected</source>
        <translation>Successfully connected</translation>
    </message>
    <message>
        <source>Disconnected</source>
        <translation>Disconnected</translation>
    </message>
    <message>
        <source>Socket state %1</source>
        <translation>Socket state %1</translation>
    </message>
    <message>
        <source>Could not find the remote host</source>
        <translation>Could not find the remote host</translation>
    </message>
    <message>
        <source>Could not find the service UUID on remote host</source>
        <translation>Could not find the service UUID on remote host</translation>
    </message>
    <message>
        <source>Attempt to read or write from socket returned an error</source>
        <translation>Attempt to read or write from socket returned an error</translation>
    </message>
    <message>
        <source>The protocol is not supported on this platform</source>
        <translation>The protocol is not supported on this platform</translation>
    </message>
    <message>
        <source>An operation was attempted while the socket was in a state that did not permit it</source>
        <translation>An operation was attempted while the socket was in a state that did not permit it</translation>
    </message>
    <message>
        <source>The remote host closed the connection</source>
        <translation>The remote host closed the connection</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>Unknown error</translation>
    </message>
</context>
<context>
    <name>BookmarkLocatorFilter</name>
    <message>
        <source>Spatial bookmarks</source>
        <translation>Spatial bookmarks</translation>
    </message>
</context>
<context>
    <name>BookmarkProperties</name>
    <message>
        <source>Bookmark Properties</source>
        <translation>Bookmark Properties</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>Name</translation>
    </message>
    <message>
        <source>Color</source>
        <translation>Color</translation>
    </message>
    <message>
        <source>Copy bookmark details</source>
        <translation>Copy bookmark details</translation>
    </message>
    <message>
        <source>Lon</source>
        <translation>Lon</translation>
    </message>
    <message>
        <source>Lat</source>
        <translation>Lat</translation>
    </message>
    <message>
        <source>X</source>
        <translation>X</translation>
    </message>
    <message>
        <source>Y</source>
        <translation>Y</translation>
    </message>
    <message>
        <source>Bookmark details copied to clipboard</source>
        <translation>Bookmark details copied to clipboard</translation>
    </message>
    <message>
        <source>Remove bookmark</source>
        <translation>Remove bookmark</translation>
    </message>
    <message>
        <source>You are about to remove a bookmark, proceed?</source>
        <translation>You are about to remove a bookmark, proceed?</translation>
    </message>
</context>
<context>
    <name>BookmarkRenderer</name>
    <message>
        <source>Bookmark: %1</source>
        <translation>Bookmark: %1</translation>
    </message>
    <message>
        <source>Project bookmarks cannot be edited</source>
        <translation>Project bookmarks cannot be edited</translation>
    </message>
</context>
<context>
    <name>BrowserPanel</name>
    <message>
        <source>Browser</source>
        <translation>Browser</translation>
    </message>
</context>
<context>
    <name>CalendarPanel</name>
    <message>
        <source>Hours</source>
        <translation>Hours</translation>
    </message>
    <message>
        <source>Minutes</source>
        <translation>Minutes</translation>
    </message>
    <message>
        <source>Seconds</source>
        <translation>Seconds</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>OK</translation>
    </message>
</context>
<context>
    <name>Changelog</name>
    <message>
        <source>What&apos;s new in QField</source>
        <translation>What&apos;s new in QField</translation>
    </message>
    <message>
        <source>Error while fetching changelog, try again later.</source>
        <translation>Error while fetching changelog, try again later.</translation>
    </message>
    <message>
        <source>Support QField</source>
        <translation>Support QField</translation>
    </message>
    <message>
        <source>Check the latest QField changes on </source>
        <translation>Check the latest QField changes on </translation>
    </message>
    <message>
        <source>QField releases page</source>
        <translation>QField releases page</translation>
    </message>
</context>
<context>
    <name>ChangelogContents</name>
    <message>
        <source>Previous releases on GitHub</source>
        <translation>Previous releases on GitHub</translation>
    </message>
</context>
<context>
    <name>CheckBox</name>
    <message>
        <source>True</source>
        <translation>True</translation>
    </message>
    <message>
        <source>False</source>
        <translation>False</translation>
    </message>
    <message>
        <source>NULL</source>
        <translation>NULL</translation>
    </message>
</context>
<context>
    <name>CloseTool</name>
    <message>
        <source>close</source>
        <translation>close</translation>
    </message>
</context>
<context>
    <name>DashBoard</name>
    <message>
        <source>The layer %1 is read only.</source>
        <translation>The layer %1 is read only.</translation>
    </message>
    <message>
        <source>Map Theme</source>
        <translation>Map Theme</translation>
    </message>
</context>
<context>
    <name>DateTime</name>
    <message>
        <source>(no date)</source>
        <translation>(no date)</translation>
    </message>
    <message>
        <source>Date value set to today.</source>
        <translation>Date value set to today.</translation>
    </message>
    <message>
        <source>Hours</source>
        <translation>Hours</translation>
    </message>
    <message>
        <source>Minutes</source>
        <translation>Minutes</translation>
    </message>
    <message>
        <source>Seconds</source>
        <translation>Seconds</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>OK</translation>
    </message>
</context>
<context>
    <name>DeltaListModel</name>
    <message>
        <source>Expected the json document to be an array of delta status</source>
        <translation>Expected the json document to be an array of delta status</translation>
    </message>
    <message>
        <source>Expected all array elements to be an object, but the element at #%1 is not</source>
        <translation>Expected all array elements to be an object, but the element at #%1 is not</translation>
    </message>
    <message>
        <source>Expected all array elements to be an object containing a key &quot;%1&quot;, but the element at #%2 is not</source>
        <translation>Expected all array elements to be an object containing a key &quot;%1&quot;, but the element at #%2 is not</translation>
    </message>
    <message>
        <source>Unrecognized status &quot;%1&quot; for $%2</source>
        <translation>Unrecognized status &quot;%1&quot; for $%2</translation>
    </message>
</context>
<context>
    <name>DigitizingLogger</name>
    <message>
        <source>Default value expression for the digitizing logger&apos;s %2 field has a parser error: %3</source>
        <translation>Default value expression for the digitizing logger&apos;s %2 field has a parser error: %3</translation>
    </message>
    <message>
        <source>Default value expression for the digitizing logger&apos;s %2 field has an evaluation error: %3</source>
        <translation>Default value expression for the digitizing logger&apos;s %2 field has an evaluation error: %3</translation>
    </message>
    <message>
        <source>Digitizing logs layer feature addition failed</source>
        <translation>Digitizing logs layer feature addition failed</translation>
    </message>
    <message>
        <source>Digitizing logs layer change commits failed</source>
        <translation>Digitizing logs layer change commits failed</translation>
    </message>
    <message>
        <source>Digitizing logs layer editing failed</source>
        <translation>Digitizing logs layer editing failed</translation>
    </message>
</context>
<context>
    <name>DigitizingToolbar</name>
    <message>
        <source>Position accuracy doesn&apos;t meet the minimum requirement, vertex not added</source>
        <translation>Position accuracy doesn&apos;t meet the minimum requirement, vertex not added</translation>
    </message>
    <message>
        <source>Cancel digitizing</source>
        <translation>Cancel digitizing</translation>
    </message>
    <message>
        <source>The collected positions count does not meet the requirement</source>
        <translation>The collected positions count does not meet the requirement</translation>
    </message>
    <message>
        <source>Should the digitized geometry be discarded?</source>
        <translation>Should the digitized geometry be discarded?</translation>
    </message>
</context>
<context>
    <name>EditorWidgetBase</name>
    <message>
        <source>Item Menu</source>
        <translation>Item Menu</translation>
    </message>
</context>
<context>
    <name>ElevationProfile</name>
    <message>
        <source>Digitize a path to render the elevation profile</source>
        <translation>Digitize a path to render the elevation profile</translation>
    </message>
    <message>
        <source>Rendering elevation profile…</source>
        <translation>Rendering elevation profile…</translation>
    </message>
</context>
<context>
    <name>ExpressionCalculatorLocatorFilter</name>
    <message>
        <source>Copy “%1” to clipboard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Calculator</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ExpressionVariableModel</name>
    <message>
        <source>Not Available</source>
        <translation>Not Available</translation>
    </message>
</context>
<context>
    <name>ExternalResource</name>
    <message>
        <source>No Value</source>
        <translation>No Value</translation>
    </message>
    <message>
        <source>Cannot handle this file type</source>
        <translation>Cannot handle this file type</translation>
    </message>
</context>
<context>
    <name>FeatureForm</name>
    <message>
        <source>Value applied</source>
        <translation>Value applied</translation>
    </message>
    <message>
        <source>Value skipped</source>
        <translation>Value skipped</translation>
    </message>
    <message>
        <source> (click to toggle)</source>
        <translation> (click to toggle)</translation>
    </message>
    <message>
        <source>Constraints not valid</source>
        <translation>Constraints not valid</translation>
    </message>
    <message>
        <source>Note: soft constraints were not met</source>
        <translation>Note: soft constraints were not met</translation>
    </message>
    <message>
        <source>Unable to save changes</source>
        <translation>Unable to save changes</translation>
    </message>
    <message>
        <source>Add feature on %1</source>
        <translation>Add feature on %1</translation>
    </message>
    <message>
        <source>Edit feature on %1</source>
        <translation>Edit feature on %1</translation>
    </message>
    <message>
        <source>View feature on %1</source>
        <translation>View feature on %1</translation>
    </message>
    <message>
        <source>Cancel editing</source>
        <translation>Cancel editing</translation>
    </message>
    <message>
        <source>You are about to dismiss the new feature, proceed?</source>
        <translation>You are about to dismiss the new feature, proceed?</translation>
    </message>
    <message>
        <source>You are about to leave editing state, any changes will be lost. Proceed?</source>
        <translation>You are about to leave editing state, any changes will be lost. Proceed?</translation>
    </message>
</context>
<context>
    <name>FeatureListForm</name>
    <message>
        <source>Stop tracking this feature to edit attributes</source>
        <translation>Stop tracking this feature to edit attributes</translation>
    </message>
    <message>
        <source>Stop tracking this feature to edit geometry</source>
        <translation>Stop tracking this feature to edit geometry</translation>
    </message>
    <message>
        <source>Changes saved</source>
        <translation>Changes saved</translation>
    </message>
    <message>
        <source>Last changes discarded</source>
        <translation>Last changes discarded</translation>
    </message>
    <message>
        <source>Successfully duplicated feature</source>
        <translation>Successfully duplicated feature</translation>
    </message>
    <message>
        <source>A number of features are being tracked, stop tracking to delete those</source>
        <translation>A number of features are being tracked, stop tracking to delete those</translation>
    </message>
    <message>
        <source>A number of features are being tracked, stop tracking to merge those</source>
        <translation>A number of features are being tracked, stop tracking to merge those</translation>
    </message>
    <message>
        <source>Successfully duplicated selected features, list updated to show newly-created features</source>
        <translation>Successfully duplicated selected features, list updated to show newly-created features</translation>
    </message>
    <message>
        <source>No feature at this position</source>
        <translation>No feature at this position</translation>
    </message>
    <message>
        <source>Merge feature(s)</source>
        <translation>Merge feature(s)</translation>
    </message>
    <message numerus="yes">
        <source>Should the %n feature(s) selected really be merge?

The features geometries will be combined into feature &apos;%1&apos;, which will keep its attributes.</source>
        <comment>0</comment>
        <translation>
            <numerusform>Should the %n feature(s) selected really be merge?

The features geometries will be combined into feature &apos;%1&apos;, which will keep its attributes.</numerusform>
            <numerusform>Should the %n feature(s) selected really be merge?

The features geometries will be combined into feature &apos;%1&apos;, which will keep its attributes.</numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <source>Successfully merged %n feature(s)</source>
        <translation>
            <numerusform>Successfully merged %n feature(s)</numerusform>
            <numerusform>Successfully merged %n feature(s)</numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <source>Failed to merge %n feature(s)</source>
        <translation>
            <numerusform>Failed to merge %n feature(s)</numerusform>
            <numerusform>Failed to merge %n feature(s)</numerusform>
        </translation>
    </message>
    <message>
        <source>Delete feature(s)</source>
        <translation>Delete feature(s)</translation>
    </message>
    <message numerus="yes">
        <source>Should the %n feature(s) selected really be deleted?</source>
        <comment>0</comment>
        <translation>
            <numerusform>Should the %n feature(s) selected really be deleted?</numerusform>
            <numerusform>Should the %n feature(s) selected really be deleted?</numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <source>Successfully deleted %n feature(s)</source>
        <translation>
            <numerusform>Successfully deleted %n feature(s)</numerusform>
            <numerusform>Successfully deleted %n feature(s)</numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <source>Failed to delete %n feature(s)</source>
        <translation>
            <numerusform>Failed to delete %n feature(s)</numerusform>
            <numerusform>Failed to delete %n feature(s)</numerusform>
        </translation>
    </message>
    <message>
        <source>Changes discarded</source>
        <translation>Changes discarded</translation>
    </message>
</context>
<context>
    <name>FeatureModel</name>
    <message>
        <source>Value &quot;%1&quot; %4 could not be converted to a compatible value for field %2(%3).</source>
        <translation>Value &quot;%1&quot; %4 could not be converted to a compatible value for field %2(%3).</translation>
    </message>
    <message>
        <source>Cannot update feature</source>
        <translation>Cannot update feature</translation>
    </message>
    <message>
        <source>Feature %1 could not be fetched after commit</source>
        <translation>Feature %1 could not be fetched after commit</translation>
    </message>
    <message>
        <source>Default value expression for %1:%2 has parser error: %3</source>
        <translation>Default value expression for %1:%2 has parser error: %3</translation>
    </message>
    <message>
        <source>Default value expression for %1:%2 has evaluation error: %3</source>
        <translation>Default value expression for %1:%2 has evaluation error: %3</translation>
    </message>
    <message>
        <source>Cannot start editing on layer &quot;%1&quot; to create feature %2</source>
        <translation>Cannot start editing on layer &quot;%1&quot; to create feature %2</translation>
    </message>
    <message>
        <source>Layer &quot;%1&quot; has been commited but the newly created feature %2 could not be fetched</source>
        <translation>Layer &quot;%1&quot; has been commited but the newly created feature %2 could not be fetched</translation>
    </message>
    <message>
        <source>Layer &quot;%1&quot; cannot be commited with the newly created feature %2. Reason:
%3</source>
        <translation>Layer &quot;%1&quot; cannot be commited with the newly created feature %2. Reason:
%3</translation>
    </message>
    <message>
        <source>Feature %2 could not be added in layer &quot;%1&quot;</source>
        <translation>Feature %2 could not be added in layer &quot;%1&quot;</translation>
    </message>
    <message>
        <source>Could not save changes. Rolling back.</source>
        <translation>Could not save changes. Rolling back.</translation>
    </message>
    <message>
        <source>Cannot start editing</source>
        <translation>Cannot start editing</translation>
    </message>
</context>
<context>
    <name>FeaturesLocatorFilter</name>
    <message>
        <source>Open form</source>
        <translation>Open form</translation>
    </message>
    <message>
        <source>Set feature as destination</source>
        <translation>Set feature as destination</translation>
    </message>
    <message>
        <source>Set feature as navigation</source>
        <translation>Set feature as navigation</translation>
    </message>
    <message>
        <source>Feature has no geometry</source>
        <translation>Feature has no geometry</translation>
    </message>
    <message>
        <source>Features in all layers</source>
        <translation>Features in all layers</translation>
    </message>
</context>
<context>
    <name>FillRingToolBar</name>
    <message>
        <source>The ring is not closed</source>
        <translation>The ring is not closed</translation>
    </message>
    <message>
        <source>The ring is not valid</source>
        <translation>The ring is not valid</translation>
    </message>
    <message>
        <source>The ring crosses existing rings (it is not disjoint)</source>
        <translation>The ring crosses existing rings (it is not disjoint)</translation>
    </message>
    <message>
        <source>The ring doesn&apos;t have any existing ring to fit into</source>
        <translation>The ring doesn&apos;t have any existing ring to fit into</translation>
    </message>
    <message>
        <source>Unknown error when creating the ring</source>
        <translation>Unknown error when creating the ring</translation>
    </message>
    <message>
        <source>Fill ring</source>
        <translation>Fill ring</translation>
    </message>
    <message>
        <source>Would you like to fill the ring with a new polygon?</source>
        <translation>Would you like to fill the ring with a new polygon?</translation>
    </message>
</context>
<context>
    <name>FinlandLocatorFilter</name>
    <message>
        <source>Finnish address search</source>
        <translation>Finnish address search</translation>
    </message>
</context>
<context>
    <name>GeometryEditorsToolbar</name>
    <message>
        <source>Vertex Tool</source>
        <translation>Vertex Tool</translation>
    </message>
    <message>
        <source>Split Tool</source>
        <translation>Split Tool</translation>
    </message>
    <message>
        <source>Reshape Tool</source>
        <translation>Reshape Tool</translation>
    </message>
    <message>
        <source>Fill Ring Tool</source>
        <translation>Fill Ring Tool</translation>
    </message>
</context>
<context>
    <name>GotoLocatorFilter</name>
    <message>
        <source>Go to %1 %2 (Map CRS)</source>
        <translation>Go to %1 %2 (Map CRS)</translation>
    </message>
    <message>
        <source>Set navigation point</source>
        <translation>Set navigation point</translation>
    </message>
    <message>
        <source>Go to %1° %2° (WGS84)</source>
        <translation>Go to %1° %2° (WGS84)</translation>
    </message>
    <message>
        <source>Go to coordinate</source>
        <translation>Go to coordinate</translation>
    </message>
    <message>
        <source>Go to %1%2 %3%4 (Map CRS, %5)</source>
        <translation>Go to %1%2 %3%4 (Map CRS, %5)</translation>
    </message>
    <message>
        <source>Go to %1°N %2°E (%3)</source>
        <translation>Go to %1°N %2°E (%3)</translation>
    </message>
</context>
<context>
    <name>LayerLoginDialog</name>
    <message>
        <source>Login information</source>
        <translation>Login information</translation>
    </message>
    <message>
        <source>Username</source>
        <translation>Username</translation>
    </message>
    <message>
        <source>Password</source>
        <translation>Password</translation>
    </message>
</context>
<context>
    <name>LayerObserver</name>
    <message>
        <source>Failed to find a local primary key column in layer &quot;%1&quot;</source>
        <translation>Failed to find a local primary key column in layer &quot;%1&quot;</translation>
    </message>
    <message>
        <source>Failed to find a source primary key column in layer &quot;%1&quot;</source>
        <translation>Failed to find a source primary key column in layer &quot;%1&quot;</translation>
    </message>
</context>
<context>
    <name>LayerTreeItemProperties</name>
    <message>
        <source>Expand group</source>
        <translation>Expand group</translation>
    </message>
    <message>
        <source>Expand legend item</source>
        <translation>Expand legend item</translation>
    </message>
    <message>
        <source>Stop tracking</source>
        <translation>Stop tracking</translation>
    </message>
    <message>
        <source>Setup tracking</source>
        <translation>Setup tracking</translation>
    </message>
    <message>
        <source>This layer is invalid. This might be due to a network issue, a missing file or a misconfiguration of the project.</source>
        <translation>This layer is invalid. This might be due to a network issue, a missing file or a misconfiguration of the project.</translation>
    </message>
    <message>
        <source>Show on map</source>
        <translation>Show on map</translation>
    </message>
    <message>
        <source>Show labels</source>
        <translation>Show labels</translation>
    </message>
    <message>
        <source>Opacity</source>
        <translation>Opacity</translation>
    </message>
    <message>
        <source>Zoom to group</source>
        <translation>Zoom to group</translation>
    </message>
    <message>
        <source>Zoom to parent layer</source>
        <translation>Zoom to parent layer</translation>
    </message>
    <message>
        <source>Zoom to layer</source>
        <translation>Zoom to layer</translation>
    </message>
    <message>
        <source>Reload data</source>
        <translation>Reload data</translation>
    </message>
    <message>
        <source>Reload of layer %1 triggered</source>
        <translation>Reload of layer %1 triggered</translation>
    </message>
    <message>
        <source>Show features list</source>
        <translation>Show features list</translation>
    </message>
    <message>
        <source>The layer has no features</source>
        <translation>The layer has no features</translation>
    </message>
    <message>
        <source>Track on layer %1 stopped</source>
        <translation>Track on layer %1 stopped</translation>
    </message>
    <message>
        <source>Read-Only Layer</source>
        <translation>Read-Only Layer</translation>
    </message>
    <message>
        <source>Geometry Locked Layer</source>
        <translation>Geometry Locked Layer</translation>
    </message>
    <message>
        <source>This layer is configured as &quot;Read-Only&quot; which disables adding, deleting and editing features.</source>
        <translation>This layer is configured as &quot;Read-Only&quot; which disables adding, deleting and editing features.</translation>
    </message>
    <message>
        <source>This layer is configured as &quot;Lock Geometries&quot; which disables adding and deleting features, as well as modifying the geometries of existing features.</source>
        <translation>This layer is configured as &quot;Lock Geometries&quot; which disables adding and deleting features, as well as modifying the geometries of existing features.</translation>
    </message>
    <message>
        <source>Show visible features list</source>
        <translation>Show visible features list</translation>
    </message>
    <message>
        <source>Show Features Menu</source>
        <translation>Show Features Menu</translation>
    </message>
</context>
<context>
    <name>LayerUtils</name>
    <message>
        <source>Cannot start editing, no layer</source>
        <translation>Cannot start editing, no layer</translation>
    </message>
    <message>
        <source>Cannot start editing</source>
        <translation>Cannot start editing</translation>
    </message>
    <message>
        <source>Cannot commit deletion of feature %2 in layer &quot;%1&quot;. Reason:
%3</source>
        <translation>Cannot commit deletion of feature %2 in layer &quot;%1&quot;. Reason:
%3</translation>
    </message>
    <message>
        <source>Cannot commit deletion in layer &quot;%1&quot;. Reason:
%3</source>
        <translation>Cannot commit deletion in layer &quot;%1&quot;. Reason:
%3</translation>
    </message>
    <message>
        <source>Cannot delete feature %1</source>
        <translation>Cannot delete feature %1</translation>
    </message>
    <message>
        <source>Cannot rollback layer changes in layer %1</source>
        <translation>Cannot rollback layer changes in layer %1</translation>
    </message>
    <message>
        <source>Cannot copy invalid feature</source>
        <translation>Cannot copy invalid feature</translation>
    </message>
    <message>
        <source>Cannot add new feature in layer &quot;%1&quot;. Reason:
%2</source>
        <translation>Cannot add new feature in layer &quot;%1&quot;. Reason:
%2</translation>
    </message>
    <message>
        <source>Cannot add new feature in layer &quot;%1&quot;.</source>
        <translation>Cannot add new feature in layer &quot;%1&quot;.</translation>
    </message>
</context>
<context>
    <name>LocalFilesModel</name>
    <message>
        <source>QField files directory</source>
        <translation>QField files directory</translation>
    </message>
    <message>
        <source>Imported projects</source>
        <translation>Imported projects</translation>
    </message>
    <message>
        <source>Imported datasets</source>
        <translation>Imported datasets</translation>
    </message>
    <message>
        <source>Additional files directory</source>
        <translation>Additional files directory</translation>
    </message>
    <message>
        <source>Sample projects</source>
        <translation>Sample projects</translation>
    </message>
</context>
<context>
    <name>LocatorFiltersModel</name>
    <message>
        <source>Returns a list of features accross all searchable layers with matching attributes</source>
        <translation>Returns a list of features accross all searchable layers with matching attributes</translation>
    </message>
    <message>
        <source>Returns a point from a pair of X and Y coordinates typed in the search bar</source>
        <translation>Returns a point from a pair of X and Y coordinates typed in the search bar</translation>
    </message>
    <message>
        <source>Returns a list of bookmark with matching names</source>
        <translation>Returns a list of bookmark with matching names</translation>
    </message>
    <message>
        <source>Returns a list of locations and addresses within Finland with matching terms</source>
        <translation>Returns a list of locations and addresses within Finland with matching terms</translation>
    </message>
    <message>
        <source>Search filters for your locations have been activated, customize results in the settings panel</source>
        <translation>Search filters for your locations have been activated, customize results in the settings panel</translation>
    </message>
    <message>
        <source>Returns the value of the expression typed in the search bar</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LocatorItem</name>
    <message>
        <source>Search…</source>
        <translation>Search…</translation>
    </message>
</context>
<context>
    <name>LocatorSettings</name>
    <message>
        <source>Search Settings</source>
        <translation>Search Settings</translation>
    </message>
    <message>
        <source>Trigger without its prefix</source>
        <translation>Trigger without its prefix</translation>
    </message>
    <message>
        <source>Search Bar Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>When disabled, this locator filter can still be used by typing the prefix %1 in the search bar.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable %1 locator by default</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MessageLog</name>
    <message>
        <source>Message Logs</source>
        <translation>Message Logs</translation>
    </message>
    <message>
        <source>Message text copied</source>
        <translation>Message text copied</translation>
    </message>
    <message>
        <source>Clear message log</source>
        <translation>Clear message log</translation>
    </message>
    <message>
        <source>Message log cleared</source>
        <translation>Message log cleared</translation>
    </message>
    <message>
        <source>Send application log</source>
        <translation>Send application log</translation>
    </message>
    <message>
        <source>Your application log is being sent</source>
        <translation>Your application log is being sent</translation>
    </message>
</context>
<context>
    <name>MultiFeatureListModelBase</name>
    <message>
        <source>Cannot start editing</source>
        <translation>Cannot start editing</translation>
    </message>
    <message>
        <source>Cannot rollback layer changes in layer %1</source>
        <translation>Cannot rollback layer changes in layer %1</translation>
    </message>
    <message>
        <source>Cannot change geometry of feature %1 in %2</source>
        <translation>Cannot change geometry of feature %1 in %2</translation>
    </message>
</context>
<context>
    <name>NavigationBar</name>
    <message>
        <source>Features</source>
        <translation>Features</translation>
    </message>
    <message>
        <source>Feature List Menu</source>
        <translation>Feature List Menu</translation>
    </message>
    <message>
        <source>Toggle Feature Selection</source>
        <translation>Toggle Feature Selection</translation>
    </message>
    <message>
        <source>Print Atlas Feature(s) to PDF</source>
        <translation>Print Atlas Feature(s) to PDF</translation>
    </message>
    <message>
        <source>Merge Selected Features</source>
        <translation>Merge Selected Features</translation>
    </message>
    <message>
        <source>Move Selected Feature(s)</source>
        <translation>Move Selected Feature(s)</translation>
    </message>
    <message>
        <source>Duplicate Selected Feature(s)</source>
        <translation>Duplicate Selected Feature(s)</translation>
    </message>
    <message>
        <source>Delete Selected Feature(s)</source>
        <translation>Delete Selected Feature(s)</translation>
    </message>
    <message>
        <source>Feature Menu</source>
        <translation>Feature Menu</translation>
    </message>
    <message>
        <source>Print Atlas Feature to PDF</source>
        <translation>Print Atlas Feature to PDF</translation>
    </message>
    <message>
        <source>Zoom to Feature</source>
        <translation>Zoom to Feature</translation>
    </message>
    <message>
        <source>Auto-Zoom to Feature</source>
        <translation>Auto-Zoom to Feature</translation>
    </message>
    <message>
        <source>Set Feature as Destination</source>
        <translation>Set Feature as Destination</translation>
    </message>
    <message>
        <source>Move Feature</source>
        <translation>Move Feature</translation>
    </message>
    <message>
        <source>Duplicate Feature</source>
        <translation>Duplicate Feature</translation>
    </message>
    <message>
        <source>Delete Feature</source>
        <translation>Delete Feature</translation>
    </message>
    <message>
        <source>Select template below</source>
        <translation>Select template below</translation>
    </message>
    <message>
        <source>Printing atlas feature(s) to PDF</source>
        <translation>Printing atlas feature(s) to PDF</translation>
    </message>
    <message>
        <source>Atlas feature(s) successfully printed to PDF and placed in your documents</source>
        <translation>Atlas feature(s) successfully printed to PDF and placed in your documents</translation>
    </message>
    <message>
        <source>Print Atlas Feature(s) to Image</source>
        <translation>Print Atlas Feature(s) to Image</translation>
    </message>
    <message>
        <source>Print Atlas Feature to Image</source>
        <translation>Print Atlas Feature to Image</translation>
    </message>
    <message>
        <source>Print Atlas Feature(s)</source>
        <translation>Print Atlas Feature(s)</translation>
    </message>
    <message>
        <source>Printing...</source>
        <translation>Printing...</translation>
    </message>
    <message>
        <source>Atlas feature(s) successfully printed and placed in your project folder</source>
        <translation>Atlas feature(s) successfully printed and placed in your project folder</translation>
    </message>
</context>
<context>
    <name>NavigationInformationView</name>
    <message>
        <source>Lat.</source>
        <translation>Lat.</translation>
    </message>
    <message>
        <source>X</source>
        <translation>X</translation>
    </message>
    <message>
        <source>Lon.</source>
        <translation>Lon.</translation>
    </message>
    <message>
        <source>centroid</source>
        <translation>centroid</translation>
    </message>
    <message>
        <source>Lon</source>
        <translation>Lon</translation>
    </message>
    <message>
        <source>Y</source>
        <translation>Y</translation>
    </message>
    <message>
        <source>Lat</source>
        <translation>Lat</translation>
    </message>
    <message>
        <source>Dist.</source>
        <translation>Dist.</translation>
    </message>
    <message>
        <source>N/A</source>
        <translation>N/A</translation>
    </message>
    <message>
        <source>Bearing</source>
        <translation>Bearing</translation>
    </message>
</context>
<context>
    <name>NmeaGnssReceiver</name>
    <message>
        <source>Could not parse the IMU position: %1,%2,%3</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OrderedRelationModel</name>
    <message>
        <source>Cannot start editing</source>
        <translation>Cannot start editing</translation>
    </message>
    <message>
        <source>Cannot rollback layer changes in layer %1</source>
        <translation>Cannot rollback layer changes in layer %1</translation>
    </message>
    <message>
        <source>Cannot commit layer changes in layer %1.</source>
        <translation>Cannot commit layer changes in layer %1.</translation>
    </message>
    <message>
        <source>Cannot update features ordering</source>
        <translation>Cannot update features ordering</translation>
    </message>
</context>
<context>
    <name>OverlayFeatureFormDrawer</name>
    <message>
        <source>Changes saved</source>
        <translation>Changes saved</translation>
    </message>
    <message>
        <source>Changes discarded</source>
        <translation>Changes discarded</translation>
    </message>
    <message>
        <source>Last changes discarded</source>
        <translation>Last changes discarded</translation>
    </message>
    <message>
        <source>Constraints not valid</source>
        <translation>Constraints not valid</translation>
    </message>
</context>
<context>
    <name>PlatformUtilities</name>
    <message>
        <source>Select Media File</source>
        <translation>Select Media File</translation>
    </message>
    <message>
        <source>JPEG images (*.jpg *.jpeg)</source>
        <translation>JPEG images (*.jpg *.jpeg)</translation>
    </message>
    <message>
        <source>Failed to save gallery picture</source>
        <translation>Failed to save gallery picture</translation>
    </message>
    <message>
        <source>Open File</source>
        <translation>Open File</translation>
    </message>
    <message>
        <source>All Supported Files</source>
        <translation>All Supported Files</translation>
    </message>
    <message>
        <source>QGIS Project Files</source>
        <translation>QGIS Project Files</translation>
    </message>
    <message>
        <source>Vector Datasets</source>
        <translation>Vector Datasets</translation>
    </message>
    <message>
        <source>Raster Datasets</source>
        <translation>Raster Datasets</translation>
    </message>
    <message>
        <source>Failed to save file resource</source>
        <translation>Failed to save file resource</translation>
    </message>
    <message>
        <source>Select Image File</source>
        <translation>Select Image File</translation>
    </message>
    <message>
        <source>All images (*.jpg *.jpeg *.png *.bmp);;JPEG images (*.jpg *.jpeg);;PNG images (*.jpg *.jpeg);;BMP images (*.bmp)</source>
        <translation>All images (*.jpg *.jpeg *.png *.bmp);;JPEG images (*.jpg *.jpeg);;PNG images (*.jpg *.jpeg);;BMP images (*.bmp)</translation>
    </message>
    <message>
        <source>Select Video File</source>
        <translation>Select Video File</translation>
    </message>
    <message>
        <source>All video (*.mp4 *.mkv *.mov);;MP4 video (*.mp4);;MKV video(*.mkv);;MOV video (*.mov)</source>
        <translation>All video (*.mp4 *.mkv *.mov);;MP4 video (*.mp4);;MKV video(*.mkv);;MOV video (*.mov)</translation>
    </message>
    <message>
        <source>Audio files (*.mp3 *.aac *.ogg)</source>
        <translation>Audio files (*.mp3 *.aac *.ogg)</translation>
    </message>
    <message>
        <source>All files (*.*)</source>
        <translation>All files (*.*)</translation>
    </message>
    <message>
        <source>Select File</source>
        <translation>Select File</translation>
    </message>
    <message>
        <source>Audio files (*.mp3 *.aac *.ogg *.m4a *.mp4 *.mov)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PositionInformationView</name>
    <message>
        <source>Lat.</source>
        <translation>Lat.</translation>
    </message>
    <message>
        <source>N/A</source>
        <translation>N/A</translation>
    </message>
    <message>
        <source>X</source>
        <translation>X</translation>
    </message>
    <message>
        <source>Lon.</source>
        <translation>Lon.</translation>
    </message>
    <message>
        <source>Lon</source>
        <translation>Lon</translation>
    </message>
    <message>
        <source>Y</source>
        <translation>Y</translation>
    </message>
    <message>
        <source>Lat</source>
        <translation>Lat</translation>
    </message>
    <message>
        <source>Altitude</source>
        <translation>Altitude</translation>
    </message>
    <message>
        <source>Speed</source>
        <translation>Speed</translation>
    </message>
    <message>
        <source>H. Accuracy</source>
        <translation>H. Accuracy</translation>
    </message>
    <message>
        <source>V. Accuracy</source>
        <translation>V. Accuracy</translation>
    </message>
    <message>
        <source>PDOP</source>
        <translation>PDOP</translation>
    </message>
    <message>
        <source>HDOP</source>
        <translation>HDOP</translation>
    </message>
    <message>
        <source>VDOP</source>
        <translation>VDOP</translation>
    </message>
    <message>
        <source>Valid</source>
        <translation>Valid</translation>
    </message>
    <message>
        <source>Fix</source>
        <translation>Fix</translation>
    </message>
    <message>
        <source>Quality</source>
        <translation>Quality</translation>
    </message>
</context>
<context>
    <name>PositioningDeviceModel</name>
    <message>
        <source>Internal device</source>
        <translation>Internal device</translation>
    </message>
</context>
<context>
    <name>PositioningDeviceSettings</name>
    <message>
        <source>Positioning Device Settings</source>
        <translation>Positioning Device Settings</translation>
    </message>
    <message>
        <source>Name:</source>
        <translation>Name:</translation>
    </message>
    <message>
        <source>Leave empty to auto-fill</source>
        <translation>Leave empty to auto-fill</translation>
    </message>
    <message>
        <source>Connection type:</source>
        <translation>Connection type:</translation>
    </message>
    <message>
        <source>Bluetooth</source>
        <translation>Bluetooth</translation>
    </message>
    <message>
        <source>Bluetooth (NMEA)</source>
        <translation>Bluetooth (NMEA)</translation>
    </message>
    <message>
        <source>TCP (NMEA)</source>
        <translation>TCP (NMEA)</translation>
    </message>
    <message>
        <source>UDP (NMEA)</source>
        <translation>UDP (NMEA)</translation>
    </message>
    <message>
        <source>Serial port (NMEA)</source>
        <translation>Serial port (NMEA)</translation>
    </message>
</context>
<context>
    <name>PositioningInformationView</name>
    <message>
        <source>Lon</source>
        <translation>Lon</translation>
    </message>
    <message>
        <source>X</source>
        <translation>X</translation>
    </message>
    <message>
        <source>N/A</source>
        <translation>N/A</translation>
    </message>
    <message>
        <source>Lat</source>
        <translation>Lat</translation>
    </message>
    <message>
        <source>Y</source>
        <translation>Y</translation>
    </message>
    <message>
        <source>Altitude</source>
        <translation>Altitude</translation>
    </message>
    <message>
        <source>Speed</source>
        <translation>Speed</translation>
    </message>
    <message>
        <source>H. Accuracy</source>
        <translation>H. Accuracy</translation>
    </message>
    <message>
        <source>V. Accuracy</source>
        <translation>V. Accuracy</translation>
    </message>
    <message>
        <source>PDOP</source>
        <translation>PDOP</translation>
    </message>
    <message>
        <source>HDOP</source>
        <translation>HDOP</translation>
    </message>
    <message>
        <source>VDOP</source>
        <translation>VDOP</translation>
    </message>
    <message>
        <source>Valid</source>
        <translation>Valid</translation>
    </message>
    <message>
        <source>Fix</source>
        <translation>Fix</translation>
    </message>
    <message>
        <source>Quality</source>
        <translation>Quality</translation>
    </message>
</context>
<context>
    <name>PositioningPreciseView</name>
    <message>
        <source>Dist.</source>
        <translation>Dist.</translation>
    </message>
    <message>
        <source>Positioning accuracy too low for this precision level</source>
        <translation>Positioning accuracy too low for this precision level</translation>
    </message>
</context>
<context>
    <name>PositioningSettings</name>
    <message>
        <source>Internal device</source>
        <translation>Internal device</translation>
    </message>
</context>
<context>
    <name>QFieldAudioRecorder</name>
    <message>
        <source>Audio Recorder</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QFieldCloudConnection</name>
    <message>
        <source>[timeout] The request took too long to finish, please retry.</source>
        <translation>[timeout] The request took too long to finish, please retry.</translation>
    </message>
    <message>
        <source>[aborted] The request has been aborted.</source>
        <translation>[aborted] The request has been aborted.</translation>
    </message>
    <message>
        <source>Server Error.</source>
        <translation>Server Error.</translation>
    </message>
    <message>
        <source>Network Error.</source>
        <translation>Network Error.</translation>
    </message>
    <message>
        <source>Server not found, please check the server URL</source>
        <translation>Server not found, please check the server URL</translation>
    </message>
    <message>
        <source>Timeout error, please retry</source>
        <translation>Timeout error, please retry</translation>
    </message>
    <message>
        <source>Wrong username or password</source>
        <translation>Wrong username or password</translation>
    </message>
    <message>
        <source>Session expired</source>
        <translation>Session expired</translation>
    </message>
    <message>
        <source>Login temporary unavailable</source>
        <translation>Login temporary unavailable</translation>
    </message>
    <message>
        <source>Failed to upload attachment stored at `%1`, reason:
%2</source>
        <translation>Failed to upload attachment stored at `%1`, reason:
%2</translation>
    </message>
    <message>
        <source>Login error due to unexpected redirect, please retry later</source>
        <translation>Login error due to unexpected redirect, please retry later</translation>
    </message>
</context>
<context>
    <name>QFieldCloudDeltaHistory</name>
    <message>
        <source>Push History</source>
        <translation>Push History</translation>
    </message>
    <message>
        <source>Loading…</source>
        <translation>Loading…</translation>
    </message>
</context>
<context>
    <name>QFieldCloudLogin</name>
    <message>
        <source>Failed to login</source>
        <translation>Failed to login</translation>
    </message>
    <message>
        <source>Failed to sign in</source>
        <translation>Failed to sign in</translation>
    </message>
    <message>
        <source>Server URL
(Leave empty to use the default server)</source>
        <translation>Server URL
(Leave empty to use the default server)</translation>
    </message>
    <message>
        <source>Username or email</source>
        <translation>Username or email</translation>
    </message>
    <message>
        <source>Password</source>
        <translation>Password</translation>
    </message>
    <message>
        <source>Sign out</source>
        <translation>Sign out</translation>
    </message>
    <message>
        <source>Signing in, please wait</source>
        <translation>Signing in, please wait</translation>
    </message>
    <message>
        <source>Sign in</source>
        <translation>Sign in</translation>
    </message>
    <message>
        <source>New user?</source>
        <translation>New user?</translation>
    </message>
    <message>
        <source>Register an account</source>
        <translation>Register an account</translation>
    </message>
    <message>
        <source>Logout</source>
        <translation>Logout</translation>
    </message>
    <message>
        <source>Logging in, please wait</source>
        <translation>Logging in, please wait</translation>
    </message>
    <message>
        <source>Login</source>
        <translation>Login</translation>
    </message>
    <message>
        <source>The easiest way to transfer you project from QGIS to your devices!</source>
        <translation>The easiest way to transfer you project from QGIS to your devices!</translation>
    </message>
    <message>
        <source>Learn more about QFieldCloud</source>
        <translation>Learn more about QFieldCloud</translation>
    </message>
</context>
<context>
    <name>QFieldCloudPackageLayersFeedback</name>
    <message>
        <source>Problematic QFieldCloud layer packaging</source>
        <translation>Problematic QFieldCloud layer packaging</translation>
    </message>
    <message>
        <source>Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.</source>
        <translation>Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server.</translation>
    </message>
    <message>
        <source>QFieldCloud had troubles packaging your project</source>
        <translation>QFieldCloud had troubles packaging your project</translation>
    </message>
    <message>
        <source>Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server. Please check the logs of the latest packaging job on the qfield.cloud website.</source>
        <translation>Some layers have not been packaged correctly on QFieldCloud. These layers might be misconfigured or their data source is not accessible from the QFieldCloud server. Please check the logs of the latest packaging job on the qfield.cloud website.</translation>
    </message>
</context>
<context>
    <name>QFieldCloudPopup</name>
    <message>
        <source>QFieldCloud</source>
        <translation>QFieldCloud</translation>
    </message>
    <message>
        <source>The current project is not stored on QFieldCloud.&lt;br&gt;&lt;br&gt;</source>
        <translation>The current project is not stored on QFieldCloud.&lt;br&gt;&lt;br&gt;</translation>
    </message>
    <message>
        <source>Storing projects on QFieldCloud offers seamless synchornization, offline editing, and team management.&lt;br&gt;&lt;br&gt;</source>
        <translation>Storing projects on QFieldCloud offers seamless synchornization, offline editing, and team management.&lt;br&gt;&lt;br&gt;</translation>
    </message>
    <message>
        <source>Learn more about QFieldCloud</source>
        <translation>Learn more about QFieldCloud</translation>
    </message>
    <message>
        <source>Disconnected from the cloud.</source>
        <translation>Disconnected from the cloud.</translation>
    </message>
    <message>
        <source>Connecting to the cloud.</source>
        <translation>Connecting to the cloud.</translation>
    </message>
    <message>
        <source>Greetings &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Greetings &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <source>This QFieldCloud project was first downloaded with another cloud account. Please sign in with the original account for this project to use the QFieldCloud functionality.</source>
        <translation>This QFieldCloud project was first downloaded with another cloud account. Please sign in with the original account for this project to use the QFieldCloud functionality.</translation>
    </message>
    <message>
        <source>Downloading %1%…</source>
        <translation>Downloading %1%…</translation>
    </message>
    <message>
        <source>QFieldCloud is preparing the latest data just for you. This might take some time, please hold tight…</source>
        <translation>QFieldCloud is preparing the latest data just for you. This might take some time, please hold tight…</translation>
    </message>
    <message>
        <source>Uploading %1%…</source>
        <translation>Uploading %1%…</translation>
    </message>
    <message>
        <source>QFieldCloud is applying the latest uploaded changes. This might take some time, please hold tight…</source>
        <translation>QFieldCloud is applying the latest uploaded changes. This might take some time, please hold tight…</translation>
    </message>
    <message>
        <source>A server error has occured, please try again.</source>
        <translation>A server error has occured, please try again.</translation>
    </message>
    <message>
        <source>A network error has occured, please try again.</source>
        <translation>A network error has occured, please try again.</translation>
    </message>
    <message numerus="yes">
        <source>There is/are %n local change(s)</source>
        <translation>
            <numerusform>There is/are %n local change(s)</numerusform>
            <numerusform>There is/are %n local change(s)</numerusform>
        </translation>
    </message>
    <message>
        <source>There are no local changes</source>
        <translation>There are no local changes</translation>
    </message>
    <message>
        <source>The locally stored cloud project has been corrupted</source>
        <translation>The locally stored cloud project has been corrupted</translation>
    </message>
    <message>
        <source>Synchronize</source>
        <translation>Synchronize</translation>
    </message>
    <message>
        <source>Synchronize the whole project with all modified features and download the freshly updated project with all the applied changes from QFieldCloud.</source>
        <translation>Synchronize the whole project with all modified features and download the freshly updated project with all the applied changes from QFieldCloud.</translation>
    </message>
    <message>
        <source>Push changes</source>
        <translation>Push changes</translation>
    </message>
    <message>
        <source>Save internet bandwidth by only pushing the local features and pictures to the cloud, without updating the whole project.</source>
        <translation>Save internet bandwidth by only pushing the local features and pictures to the cloud, without updating the whole project.</translation>
    </message>
    <message>
        <source>Revert local changes</source>
        <translation>Revert local changes</translation>
    </message>
    <message>
        <source>Reset project</source>
        <translation>Reset project</translation>
    </message>
    <message>
        <source>Revert all modified features in the local layers. You cannot restore those changes.</source>
        <translation>Revert all modified features in the local layers. You cannot restore those changes.</translation>
    </message>
    <message>
        <source>Revert all modified features in the local cloud layers. You cannot restore those changes.</source>
        <translation>Revert all modified features in the local cloud layers. You cannot restore those changes.</translation>
    </message>
    <message>
        <source>The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.

While you can still view and use the project, it is strongly recommended to reset to avoid any accidental data loss as none of the changes made will be pushed back to the cloud.</source>
        <translation>The local copy of this cloud project has been corrupted. Resetting the project will re-download the cloud version and will remove any local changes, make sure those were copied first if needed.

While you can still view and use the project, it is strongly recommended to reset to avoid any accidental data loss as none of the changes made will be pushed back to the cloud.</translation>
    </message>
    <message>
        <source>Last synchronized just now</source>
        <translation>Last synchronized just now</translation>
    </message>
    <message>
        <source>Last synchronized %1 minutes ago</source>
        <translation>Last synchronized %1 minutes ago</translation>
    </message>
    <message>
        <source>Last synchronized at %1</source>
        <translation>Last synchronized at %1</translation>
    </message>
    <message>
        <source>Last synchronized on %1</source>
        <translation>Last synchronized on %1</translation>
    </message>
    <message>
        <source>Last changes pushed just now</source>
        <translation>Last changes pushed just now</translation>
    </message>
    <message>
        <source>Last changes pushed %1 minutes ago</source>
        <translation>Last changes pushed %1 minutes ago</translation>
    </message>
    <message>
        <source>Last changes pushed at %1</source>
        <translation>Last changes pushed at %1</translation>
    </message>
    <message>
        <source>Last changes pushed on %1</source>
        <translation>Last changes pushed on %1</translation>
    </message>
    <message>
        <source>No changes pushed yet</source>
        <translation>No changes pushed yet</translation>
    </message>
    <message numerus="yes">
        <source>%n attachment(s) are currently being uploaded in the background.</source>
        <translation>
            <numerusform>%n attachment(s) are currently being uploaded in the background.</numerusform>
            <numerusform>%n attachment(s) are currently being uploaded in the background.</numerusform>
        </translation>
    </message>
    <message>
        <source>Should local changes be reverted?</source>
        <translation>Should local changes be reverted?</translation>
    </message>
    <message>
        <source>Reset cloud project</source>
        <translation>Reset cloud project</translation>
    </message>
    <message>
        <source>Last warning, resetting the cloud project will erase any local changes, are you sure you want to go ahead?</source>
        <translation>Last warning, resetting the cloud project will erase any local changes, are you sure you want to go ahead?</translation>
    </message>
    <message>
        <source>Connecting cloud</source>
        <translation>Connecting cloud</translation>
    </message>
    <message>
        <source>Local changes reverted</source>
        <translation>Local changes reverted</translation>
    </message>
    <message>
        <source>Failed to revert changes</source>
        <translation>Failed to revert changes</translation>
    </message>
    <message>
        <source>No changes to revert</source>
        <translation>No changes to revert</translation>
    </message>
</context>
<context>
    <name>QFieldCloudProjectsModel</name>
    <message>
        <source>Export failed</source>
        <translation>Export failed</translation>
    </message>
    <message>
        <source>Packaged layer &apos;%1&apos; is not valid: &apos;%2&apos;</source>
        <translation>Packaged layer &apos;%1&apos; is not valid: &apos;%2&apos;</translation>
    </message>
    <message>
        <source>Failed to open temporary file for &quot;%1&quot;, reason:
%2</source>
        <translation>Failed to open temporary file for &quot;%1&quot;, reason:
%2</translation>
    </message>
    <message>
        <source>Failed to upload attachment stored at &quot;%1&quot;, reason:
%2</source>
        <translation>Failed to upload attachment stored at &quot;%1&quot;, reason:
%2</translation>
    </message>
    <message>
        <source>Failed to download file &quot;%1&quot;, reason:</source>
        <translation>Failed to download file &quot;%1&quot;, reason:</translation>
    </message>
    <message>
        <source>Failed to write downloaded file stored at &quot;%1&quot;, fs reason:</source>
        <translation>Failed to write downloaded file stored at &quot;%1&quot;, fs reason:</translation>
    </message>
    <message>
        <source>aborted</source>
        <translation>aborted</translation>
    </message>
    <message>
        <source>project(%1) trigger response refresh not contain all the expected keys: name(string), owner(string), description(string), user_role(string), is_public(bool), can_repackage(bool), needs_repackaging(bool)</source>
        <translation>project(%1) trigger response refresh not contain all the expected keys: name(string), owner(string), description(string), user_role(string), is_public(bool), can_repackage(bool), needs_repackaging(bool)</translation>
    </message>
    <message>
        <source>Getting job status, but the project is deleted.</source>
        <translation>Getting job status, but the project is deleted.</translation>
    </message>
    <message>
        <source>Job creation finished, but the server response is missing required fields: id(string)</source>
        <translation>Job creation finished, but the server response is missing required fields: id(string)</translation>
    </message>
    <message>
        <source>Getting job status, but no `%2` job triggered yet.</source>
        <translation>Getting job status, but no `%2` job triggered yet.</translation>
    </message>
    <message>
        <source>Getting job status finished, but the project is deleted.</source>
        <translation>Getting job status finished, but the project is deleted.</translation>
    </message>
    <message>
        <source>job(%1) status response does not contain all the expected keys: status(string)</source>
        <translation>job(%1) status response does not contain all the expected keys: status(string)</translation>
    </message>
    <message>
        <source>Job(%1) finished with a failed status.</source>
        <translation>Job(%1) finished with a failed status.</translation>
    </message>
    <message>
        <source>Project busy.</source>
        <translation>Project busy.</translation>
    </message>
    <message>
        <source>Packaging job finished unsuccessfully for `%1`. %2</source>
        <translation>Packaging job finished unsuccessfully for `%1`. %2</translation>
    </message>
    <message>
        <source>Failed to refresh the latest info for `%1`: %2</source>
        <translation>Failed to refresh the latest info for `%1`: %2</translation>
    </message>
    <message>
        <source>Failed to get latest package data.</source>
        <translation>Failed to get latest package data.</translation>
    </message>
    <message>
        <source>Latest package data response error.</source>
        <translation>Latest package data response error.</translation>
    </message>
    <message>
        <source>Latest package data structure error.</source>
        <translation>Latest package data structure error.</translation>
    </message>
    <message>
        <source>Project %1: Packaged layer `%2` is not valid. Error code %3, error message: %4</source>
        <translation>Project %1: Packaged layer `%2` is not valid. Error code %3, error message: %4</translation>
    </message>
    <message>
        <source>Failed to open temporary file for `%1`, reason:
%2</source>
        <translation>Failed to open temporary file for `%1`, reason:
%2</translation>
    </message>
    <message>
        <source>Failed to upload attachment stored at `%1`, reason:
%2</source>
        <translation>Failed to upload attachment stored at `%1`, reason:
%2</translation>
    </message>
    <message>
        <source>Network error. Failed to download file `%1`.</source>
        <translation>Network error. Failed to download file `%1`.</translation>
    </message>
    <message>
        <source>File system error. Failed to write file to temporary location `%1`.</source>
        <translation>File system error. Failed to write file to temporary location `%1`.</translation>
    </message>
    <message>
        <source>File system error. Failed to open file for writing on temporary `%1`.</source>
        <translation>File system error. Failed to open file for writing on temporary `%1`.</translation>
    </message>
    <message>
        <source>Project `%1`, file `%2`: %3</source>
        <translation>Project `%1`, file `%2`: %3</translation>
    </message>
    <message>
        <source>System message: </source>
        <translation>System message: </translation>
    </message>
    <message>
        <source> (see more in the QField error log)…</source>
        <translation> (see more in the QField error log)…</translation>
    </message>
    <message>
        <source>Failed to copy some of the downloaded files on your device. Check your device storage.</source>
        <translation>Failed to copy some of the downloaded files on your device. Check your device storage.</translation>
    </message>
</context>
<context>
    <name>QFieldCloudScreen</name>
    <message>
        <source>QFieldCloud Projects</source>
        <translation>QFieldCloud Projects</translation>
    </message>
    <message>
        <source>Disconnected from the cloud.</source>
        <translation>Disconnected from the cloud.</translation>
    </message>
    <message>
        <source>Connecting to the cloud.</source>
        <translation>Connecting to the cloud.</translation>
    </message>
    <message>
        <source>Greetings &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Greetings &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <source>My Projects</source>
        <translation>My Projects</translation>
    </message>
    <message>
        <source>Community</source>
        <translation>Community</translation>
    </message>
    <message>
        <source>(Available locally)</source>
        <translation>(Available locally)</translation>
    </message>
    <message>
        <source>Downloading, %1% fetched…</source>
        <translation>Downloading, %1% fetched…</translation>
    </message>
    <message>
        <source>QFieldCloud is preparing the latest data just for you. This might take some time, please hold tight…</source>
        <translation>QFieldCloud is preparing the latest data just for you. This might take some time, please hold tight…</translation>
    </message>
    <message>
        <source>Uploading…</source>
        <translation>Uploading…</translation>
    </message>
    <message>
        <source>Downloading error. </source>
        <translation>Downloading error. </translation>
    </message>
    <message>
        <source>Uploading error. </source>
        <translation>Uploading error. </translation>
    </message>
    <message>
        <source>Available locally, missing on the cloud</source>
        <translation>Available locally, missing on the cloud</translation>
    </message>
    <message>
        <source>Available on the cloud, missing locally</source>
        <translation>Available on the cloud, missing locally</translation>
    </message>
    <message>
        <source>Available locally</source>
        <translation>Available locally</translation>
    </message>
    <message>
        <source>Has changes. </source>
        <translation>Has changes. </translation>
    </message>
    <message>
        <source>Downloading project %1</source>
        <translation>Downloading project %1</translation>
    </message>
    <message>
        <source>Download Project</source>
        <translation>Download Project</translation>
    </message>
    <message>
        <source>Open Project</source>
        <translation>Open Project</translation>
    </message>
    <message>
        <source>Remove Stored Project</source>
        <translation>Remove Stored Project</translation>
    </message>
    <message>
        <source>Cancel Project Download</source>
        <translation>Cancel Project Download</translation>
    </message>
    <message>
        <source>Press and hold over a cloud project for a menu of additional actions.</source>
        <translation>Press and hold over a cloud project for a menu of additional actions.</translation>
    </message>
    <message>
        <source>Refresh projects list</source>
        <translation>Refresh projects list</translation>
    </message>
    <message>
        <source>Refreshing projects list</source>
        <translation>Refreshing projects list</translation>
    </message>
    <message>
        <source>No projects found</source>
        <translation>No projects found</translation>
    </message>
    <message>
        <source>Project Actions</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QFieldLocalDataPickerScreen</name>
    <message>
        <source>Project Folder</source>
        <translation>Project Folder</translation>
    </message>
    <message>
        <source>Local Projects &amp; Datasets</source>
        <translation>Local Projects &amp; Datasets</translation>
    </message>
    <message>
        <source>Folders</source>
        <translation>Folders</translation>
    </message>
    <message>
        <source>Projects</source>
        <translation>Projects</translation>
    </message>
    <message>
        <source>Datasets</source>
        <translation>Datasets</translation>
    </message>
    <message>
        <source>Favorites</source>
        <translation>Favorites</translation>
    </message>
    <message>
        <source>Project file</source>
        <translation>Project file</translation>
    </message>
    <message>
        <source>Vector dataset</source>
        <translation>Vector dataset</translation>
    </message>
    <message>
        <source>Raster dataset</source>
        <translation>Raster dataset</translation>
    </message>
    <message>
        <source>Send to...</source>
        <translation>Send to...</translation>
    </message>
    <message>
        <source>Export to folder...</source>
        <translation>Export to folder...</translation>
    </message>
    <message>
        <source>Remove dataset</source>
        <translation>Remove dataset</translation>
    </message>
    <message>
        <source>Send compressed folder to...</source>
        <translation>Send compressed folder to...</translation>
    </message>
    <message>
        <source>Remove project folder</source>
        <translation>Remove project folder</translation>
    </message>
    <message>
        <source>Import project from folder</source>
        <translation>Import project from folder</translation>
    </message>
    <message>
        <source>Import project from ZIP</source>
        <translation>Import project from ZIP</translation>
    </message>
    <message>
        <source>Import dataset(s)</source>
        <translation>Import dataset(s)</translation>
    </message>
    <message>
        <source>Storage management help</source>
        <translation>Storage management help</translation>
    </message>
    <message>
        <source>Import URL</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Type a URL below to download and import the project or dataset:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Item Actions</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Import Actions</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QFieldSettings</name>
    <message>
        <source>Show scale bar</source>
        <translation>Show scale bar</translation>
    </message>
    <message>
        <source>Maximized attribute form</source>
        <translation>Maximized attribute form</translation>
    </message>
    <message>
        <source>Fixed scale navigation</source>
        <translation>Fixed scale navigation</translation>
    </message>
    <message>
        <source>When fixed scale navigation is active, focusing on a search result will pan to the feature. With fixed scale navigation disabled it will pan and zoom to the feature.</source>
        <translation>When fixed scale navigation is active, focusing on a search result will pan to the feature. With fixed scale navigation disabled it will pan and zoom to the feature.</translation>
    </message>
    <message>
        <source>Show digitizing information</source>
        <translation>Show digitizing information</translation>
    </message>
    <message>
        <source>When switched on, coordinate information, such as latitude and longitude, is overlayed onto the map while digitizing new features or using the measure tool.</source>
        <translation>When switched on, coordinate information, such as latitude and longitude, is overlayed onto the map while digitizing new features or using the measure tool.</translation>
    </message>
    <message>
        <source>Show bookmarks</source>
        <translation>Show bookmarks</translation>
    </message>
    <message>
        <source>When switched on, user&apos;s saved and currently opened project bookmarks will be displayed on the map.</source>
        <translation>When switched on, user&apos;s saved and currently opened project bookmarks will be displayed on the map.</translation>
    </message>
    <message>
        <source>Use native camera</source>
        <translation>Use native camera</translation>
    </message>
    <message>
        <source>If disabled, QField will use a minimalist internal camera instead of the camera app on the device.&lt;br&gt;Tip: Enable this option and install the open camera app to create geo tagged photos.</source>
        <translation>If disabled, QField will use a minimalist internal camera instead of the camera app on the device.&lt;br&gt;Tip: Enable this option and install the open camera app to create geo tagged photos.</translation>
    </message>
    <message>
        <source>Fast editing mode</source>
        <translation>Fast editing mode</translation>
    </message>
    <message>
        <source>If enabled, the feature is stored after having a valid geometry and the constraints are fulfilled and atributes are commited immediately.</source>
        <translation>If enabled, the feature is stored after having a valid geometry and the constraints are fulfilled and atributes are commited immediately.</translation>
    </message>
    <message>
        <source>Dim screen when idling</source>
        <translation>Dim screen when idling</translation>
    </message>
    <message>
        <source>If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.</source>
        <translation>If enabled, the screen brightness will be dimmed after 20 seconds of inactivity to preserve battery.</translation>
    </message>
    <message>
        <source>Consider mouse as a touchscreen device</source>
        <translation>Consider mouse as a touchscreen device</translation>
    </message>
    <message>
        <source>If disabled, the mouse will act as a stylus pen.</source>
        <translation>If disabled, the mouse will act as a stylus pen.</translation>
    </message>
    <message>
        <source>Send anonymized metrics</source>
        <translation>Send anonymized metrics</translation>
    </message>
    <message>
        <source>If enabled, anonymized metrics will be collected and sent to help improve QField for everyone.</source>
        <translation>If enabled, anonymized metrics will be collected and sent to help improve QField for everyone.</translation>
    </message>
    <message>
        <source>General</source>
        <translation>General</translation>
    </message>
    <message>
        <source>Positioning</source>
        <translation>Positioning</translation>
    </message>
    <message>
        <source>Variables</source>
        <translation>Variables</translation>
    </message>
    <message>
        <source>Customize search bar</source>
        <translation>Customize search bar</translation>
    </message>
    <message>
        <source>User interface language:</source>
        <translation>User interface language:</translation>
    </message>
    <message>
        <source>To apply the selected user interface language, QField needs to completely shutdown and restart.</source>
        <translation>To apply the selected user interface language, QField needs to completely shutdown and restart.</translation>
    </message>
    <message>
        <source>system</source>
        <translation>system</translation>
    </message>
    <message>
        <source>Found a missing or incomplete language? %1Join the translator community.%2</source>
        <translation>Found a missing or incomplete language? %1Join the translator community.%2</translation>
    </message>
    <message>
        <source>Positioning device in use:</source>
        <translation>Positioning device in use:</translation>
    </message>
    <message>
        <source>Scanning for paired devices</source>
        <translation>Scanning for paired devices</translation>
    </message>
    <message>
        <source>Scanning failed: %1</source>
        <translation>Scanning failed: %1</translation>
    </message>
    <message>
        <source>Scanning done</source>
        <translation>Scanning done</translation>
    </message>
    <message numerus="yes">
        <source>%n device(s) found</source>
        <translation>
            <numerusform>%n device(s) found</numerusform>
            <numerusform>%n device(s) found</numerusform>
        </translation>
    </message>
    <message>
        <source>Scanning canceled</source>
        <translation>Scanning canceled</translation>
    </message>
    <message>
        <source>Scan</source>
        <translation>Scan</translation>
    </message>
    <message>
        <source>Make a full service discovery</source>
        <translation>Make a full service discovery</translation>
    </message>
    <message>
        <source>A full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.</source>
        <translation>A full device scan can take longer. You really want to do it?
Cancel to make a minimal device scan instead.</translation>
    </message>
    <message>
        <source>Connected to %1</source>
        <translation>Connected to %1</translation>
    </message>
    <message>
        <source>Connect  to %1</source>
        <translation>Connect  to %1</translation>
    </message>
    <message>
        <source>Connecting to %1</source>
        <translation>Connecting to %1</translation>
    </message>
    <message>
        <source>Use orthometric altitude from device</source>
        <translation>Use orthometric altitude from device</translation>
    </message>
    <message>
        <source>Show position information</source>
        <translation>Show position information</translation>
    </message>
    <message>
        <source>Activate accuracy indicator</source>
        <translation>Activate accuracy indicator</translation>
    </message>
    <message>
        <source>Bad accuracy below [m]</source>
        <translation>Bad accuracy below [m]</translation>
    </message>
    <message>
        <source>Excellent accuracy above [m]</source>
        <translation>Excellent accuracy above [m]</translation>
    </message>
    <message>
        <source>Enable accuracy requirement</source>
        <translation>Enable accuracy requirement</translation>
    </message>
    <message>
        <source>When the accuracy indicator is enabled, a badge is attached to the location button and colored &lt;span %1&gt;red&lt;/span&gt; if the accuracy value is below bad, &lt;span %2&gt;yellow&lt;/span&gt; if it falls short of excellent, or &lt;span %3&gt;green&lt;/span&gt;.&lt;br&gt;&lt;br&gt;In addition, an accuracy restriction mode can be toggled on, which restricts vertex addition when locked to coordinate cursor to positions with an accuracy value above the bad threshold.</source>
        <translation>When the accuracy indicator is enabled, a badge is attached to the location button and colored &lt;span %1&gt;red&lt;/span&gt; if the accuracy value is below bad, &lt;span %2&gt;yellow&lt;/span&gt; if it falls short of excellent, or &lt;span %3&gt;green&lt;/span&gt;.&lt;br&gt;&lt;br&gt;In addition, an accuracy restriction mode can be toggled on, which restricts vertex addition when locked to coordinate cursor to positions with an accuracy value above the bad threshold.</translation>
    </message>
    <message>
        <source>Enable averaged positioning requirement</source>
        <translation>Enable averaged positioning requirement</translation>
    </message>
    <message>
        <source>Minimum number of positions collected</source>
        <translation>Minimum number of positions collected</translation>
    </message>
    <message>
        <source>Automatically end collection when minimum number is met</source>
        <translation>Automatically end collection when minimum number is met</translation>
    </message>
    <message>
        <source>When enabled, digitizing vertices with a cursor locked to position will only accepted an averaged position from a minimum number of collected positions. Digitizing using averaged positions is done by pressing and holding the add vertex button, which will collect positions until the press is released. Accuracy requirement settings are respected when enabled.</source>
        <translation>When enabled, digitizing vertices with a cursor locked to position will only accepted an averaged position from a minimum number of collected positions. Digitizing using averaged positions is done by pressing and holding the add vertex button, which will collect positions until the press is released. Accuracy requirement settings are respected when enabled.</translation>
    </message>
    <message>
        <source>Antenna height compensation</source>
        <translation>Antenna height compensation</translation>
    </message>
    <message>
        <source>Antenna height [m]</source>
        <translation>Antenna height [m]</translation>
    </message>
    <message>
        <source>Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.</source>
        <translation>Z values which are recorded from the positioning device will be corrected by this value. If a value of 1.6 is entered, this will result in a correction of -1.6 for each recorded value.</translation>
    </message>
    <message>
        <source>Skip altitude correction</source>
        <translation>Skip altitude correction</translation>
    </message>
    <message>
        <source>Use the altitude as reported by the positioning device. Skip any altitude correction that may be implied by the coordinate system transformation.</source>
        <translation>Use the altitude as reported by the positioning device. Skip any altitude correction that may be implied by the coordinate system transformation.</translation>
    </message>
    <message>
        <source>Vertical grid shift in use:</source>
        <translation>Vertical grid shift in use:</translation>
    </message>
    <message>
        <source>None</source>
        <translation>None</translation>
    </message>
    <message>
        <source>Vertical grid shift is used to increase the altitude accuracy.</source>
        <translation>Vertical grid shift is used to increase the altitude accuracy.</translation>
    </message>
    <message>
        <source>QField Settings</source>
        <translation>QField Settings</translation>
    </message>
    <message>
        <source>Time of inactivity in seconds before the screen brightness get be dimmed to preserve battery.</source>
        <translation>Time of inactivity in seconds before the screen brightness get be dimmed to preserve battery.</translation>
    </message>
    <message>
        <source>Measure (M) value attached to vertices:</source>
        <translation>Measure (M) value attached to vertices:</translation>
    </message>
    <message>
        <source>Timestamp (milliseconds since epoch)</source>
        <translation>Timestamp (milliseconds since epoch)</translation>
    </message>
    <message>
        <source>Ground speed</source>
        <translation>Ground speed</translation>
    </message>
    <message>
        <source>Bearing</source>
        <translation>Bearing</translation>
    </message>
    <message>
        <source>Horizontal accuracy</source>
        <translation>Horizontal accuracy</translation>
    </message>
    <message>
        <source>Vertical accuracy</source>
        <translation>Vertical accuracy</translation>
    </message>
    <message>
        <source>PDOP</source>
        <translation>PDOP</translation>
    </message>
    <message>
        <source>HDOP</source>
        <translation>HDOP</translation>
    </message>
    <message>
        <source>VDOP</source>
        <translation>VDOP</translation>
    </message>
    <message>
        <source>When digitizing features with the coordinate cursor locked to the current position, the measurement type selected above will be added to the geometry provided it has an M dimension.</source>
        <translation>When digitizing features with the coordinate cursor locked to the current position, the measurement type selected above will be added to the geometry provided it has an M dimension.</translation>
    </message>
    <message>
        <source>Add</source>
        <translation>Add</translation>
    </message>
    <message>
        <source>Edit</source>
        <translation>Edit</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation>Remove</translation>
    </message>
    <message>
        <source>Connect to %1</source>
        <translation>Connect to %1</translation>
    </message>
    <message>
        <source>User interface appearance:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Follow system appearance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Light theme</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dark theme</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>User interface font size:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Tiny</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Normal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Large</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Extra-large</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Log NMEA sentences from device to file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This value will correct the Z values recorded from the positioning device. If a value of 1.6 is entered, QField will automatically subtract 1.6 from each recorded value. Make sure to insert the effective antenna height, i.e. pole length + antenna phase centre offset.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>Digitizing Logger</source>
        <translation>Digitizing Logger</translation>
    </message>
    <message>
        <source>Authentication required</source>
        <translation>Authentication required</translation>
    </message>
    <message>
        <source>QFieldCloud Unknown Error</source>
        <translation>QFieldCloud Unknown Error</translation>
    </message>
    <message>
        <source>Status not ok</source>
        <translation>Status not ok</translation>
    </message>
    <message>
        <source>Empty content</source>
        <translation>Empty content</translation>
    </message>
    <message>
        <source>Object not found</source>
        <translation>Object not found</translation>
    </message>
    <message>
        <source>API Error</source>
        <translation>API Error</translation>
    </message>
    <message>
        <source>Validation Error</source>
        <translation>Validation Error</translation>
    </message>
    <message>
        <source>Multiple Projects</source>
        <translation>Multiple Projects</translation>
    </message>
    <message>
        <source>Invalid delta file</source>
        <translation>Invalid delta file</translation>
    </message>
    <message>
        <source>The project does not contain a valid QGIS project file</source>
        <translation>The project does not contain a valid QGIS project file</translation>
    </message>
    <message>
        <source>Invalid job</source>
        <translation>Invalid job</translation>
    </message>
    <message>
        <source>QGIS export failed</source>
        <translation>QGIS export failed</translation>
    </message>
    <message>
        <source>QGIS is unable to open the QGIS project</source>
        <translation>QGIS is unable to open the QGIS project</translation>
    </message>
    <message>
        <source>There was an error opening the database &lt;b&gt;%1&lt;/b&gt;: %2</source>
        <translation>There was an error opening the database &lt;b&gt;%1&lt;/b&gt;: %2</translation>
    </message>
    <message>
        <source>Could not flush database %1 (%3) </source>
        <translation>Could not flush database %1 (%3) </translation>
    </message>
    <message>
        <source>Position</source>
        <translation>Position</translation>
    </message>
    <message>
        <source>Map Tool Capture</source>
        <translation>Map Tool Capture</translation>
    </message>
    <message>
        <source>Cloud User Info</source>
        <translation>Cloud User Info</translation>
    </message>
    <message>
        <source>Please wait while QField installation finalizes.</source>
        <translation>Please wait while QField installation finalizes.</translation>
    </message>
    <message>
        <source>averaged</source>
        <translation>averaged</translation>
    </message>
    <message>
        <source>centroid</source>
        <translation>centroid</translation>
    </message>
    <message>
        <source>Error zip file does not exist: &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error zip filename is empty</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error output dir does not exist: &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error output dir is not a directory: &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error output dir is not writable: &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Failed to create a subdirectory %1/%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Could not write to %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error reading file: &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error getting files: &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error opening zip archive: &apos;%1&apos; (Error code: %2)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QgisMobileapp</name>
    <message>
        <source>Project file &quot;%1&quot; does not exist</source>
        <translation>Project file &quot;%1&quot; does not exist</translation>
    </message>
    <message>
        <source>No project file currently opened</source>
        <translation>No project file currently opened</translation>
    </message>
    <message>
        <source>Could not load font %1</source>
        <translation>Could not load font %1</translation>
    </message>
    <message>
        <source>Loading font %1</source>
        <translation>Loading font %1</translation>
    </message>
</context>
<context>
    <name>QgsGpsInformation</name>
    <message>
        <source>Simulation mode</source>
        <translation>Simulation mode</translation>
    </message>
    <message>
        <source>Manual input mode</source>
        <translation>Manual input mode</translation>
    </message>
    <message>
        <source>Estimated</source>
        <translation>Estimated</translation>
    </message>
    <message>
        <source>Float RTK</source>
        <translation>Float RTK</translation>
    </message>
    <message>
        <source>Fixed RTK</source>
        <translation>Fixed RTK</translation>
    </message>
    <message>
        <source>PPS</source>
        <translation>PPS</translation>
    </message>
    <message>
        <source>DGPS</source>
        <translation>DGPS</translation>
    </message>
    <message>
        <source>Autonomous</source>
        <translation>Autonomous</translation>
    </message>
    <message>
        <source>Invalid</source>
        <translation>Invalid</translation>
    </message>
    <message>
        <source>Unknown (%1)</source>
        <translation>Unknown (%1)</translation>
    </message>
    <message>
        <source> + IMU</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QgsQuickMapCanvasMap</name>
    <message>
        <source>Rendering</source>
        <translation>Rendering</translation>
    </message>
</context>
<context>
    <name>QgsQuickMapSettings</name>
    <message>
        <source>Map Canvas rotation is not supported. Resetting from %1 to 0.</source>
        <translation>Map Canvas rotation is not supported. Resetting from %1 to 0.</translation>
    </message>
</context>
<context>
    <name>ReferencingFeatureListModel</name>
    <message>
        <source>Invalid referencing layer</source>
        <translation>Invalid referencing layer</translation>
    </message>
    <message>
        <source>Cannot start editing</source>
        <translation>Cannot start editing</translation>
    </message>
    <message>
        <source>Cannot delete feature</source>
        <translation>Cannot delete feature</translation>
    </message>
    <message>
        <source>Cannot rollback layer changes in layer %1</source>
        <translation>Cannot rollback layer changes in layer %1</translation>
    </message>
    <message>
        <source>Cannot commit layer changes in layer %1.</source>
        <translation>Cannot commit layer changes in layer %1.</translation>
    </message>
</context>
<context>
    <name>RelationCombobox</name>
    <message>
        <source>Search…</source>
        <translation>Search…</translation>
    </message>
    <message>
        <source>Invalid relation</source>
        <translation>Invalid relation</translation>
    </message>
</context>
<context>
    <name>ReshapeToolBar</name>
    <message>
        <source>The geometry could not be reshaped</source>
        <translation>The geometry could not be reshaped</translation>
    </message>
</context>
<context>
    <name>ScaleBarMeasurement</name>
    <message>
        <source>Unknown</source>
        <translation>Unknown</translation>
    </message>
</context>
<context>
    <name>SerialPortDeviceChooser</name>
    <message>
        <source>Select the serial port from the list below:</source>
        <translation>Select the serial port from the list below:</translation>
    </message>
    <message>
        <source>No serial ports detected, refresh the list once a device is connected.</source>
        <translation>No serial ports detected, refresh the list once a device is connected.</translation>
    </message>
    <message>
        <source>Refresh list</source>
        <translation>Refresh list</translation>
    </message>
    <message>
        <source>Serial port display name:</source>
        <translation>Serial port display name:</translation>
    </message>
    <message>
        <source>Serial port address:</source>
        <translation>Serial port address:</translation>
    </message>
</context>
<context>
    <name>SerialPortReceiver</name>
    <message>
        <source>Could not find the serial port device</source>
        <translation>Could not find the serial port device</translation>
    </message>
    <message>
        <source>Attempt to read from the serial port returned an error</source>
        <translation>Attempt to read from the serial port returned an error</translation>
    </message>
    <message>
        <source>The connection was refused due to not having enough permission</source>
        <translation>The connection was refused due to not having enough permission</translation>
    </message>
    <message>
        <source>Serial port receiver error (%1)</source>
        <translation>Serial port receiver error (%1)</translation>
    </message>
</context>
<context>
    <name>SplitFeatureToolbar</name>
    <message>
        <source>Feature could not be split</source>
        <translation>Feature could not be split</translation>
    </message>
</context>
<context>
    <name>SystemLoader</name>
    <message>
        <source>Preparing QField, this is a one time operation that might take some time</source>
        <translation>Preparing QField, this is a one time operation that might take some time</translation>
    </message>
</context>
<context>
    <name>TcpDeviceChooser</name>
    <message>
        <source>Address:</source>
        <translation>Address:</translation>
    </message>
    <message>
        <source>Port:</source>
        <translation>Port:</translation>
    </message>
</context>
<context>
    <name>TcpReceiver</name>
    <message>
        <source>Connecting…</source>
        <translation>Connecting…</translation>
    </message>
    <message>
        <source>Successfully connected</source>
        <translation>Successfully connected</translation>
    </message>
    <message>
        <source>Disconnected</source>
        <translation>Disconnected</translation>
    </message>
    <message>
        <source>Socket state %1</source>
        <translation>Socket state %1</translation>
    </message>
    <message>
        <source>Could not find the remote host</source>
        <translation>Could not find the remote host</translation>
    </message>
    <message>
        <source>Attempt to read or write from socket returned an error</source>
        <translation>Attempt to read or write from socket returned an error</translation>
    </message>
    <message>
        <source>The connection was refused by the remote hose</source>
        <translation>The connection was refused by the remote hose</translation>
    </message>
    <message>
        <source>UDP receiver error (%1)</source>
        <translation>UDP receiver error (%1)</translation>
    </message>
    <message>
        <source>The connection was refused by the remote host</source>
        <translation>The connection was refused by the remote host</translation>
    </message>
</context>
<context>
    <name>TemporalProperties</name>
    <message>
        <source>Temporal Properties</source>
        <translation>Temporal Properties</translation>
    </message>
    <message>
        <source>Enable temporal filter</source>
        <translation>Enable temporal filter</translation>
    </message>
</context>
<context>
    <name>TextEdit</name>
    <message>
        <source>Copy Text</source>
        <translation>Copy Text</translation>
    </message>
    <message>
        <source>Paste Text</source>
        <translation>Paste Text</translation>
    </message>
    <message>
        <source>Scan Code</source>
        <translation>Scan Code</translation>
    </message>
</context>
<context>
    <name>Tracking</name>
    <message>
        <source>Track on layer %1 started</source>
        <translation>Track on layer %1 started</translation>
    </message>
    <message>
        <source>Tracker Settings</source>
        <translation>Tracker Settings</translation>
    </message>
    <message>
        <source>Activate time constraint</source>
        <translation>Activate time constraint</translation>
    </message>
    <message>
        <source>Minimum time [sec]</source>
        <translation>Minimum time [sec]</translation>
    </message>
    <message>
        <source>Activate distance constraint</source>
        <translation>Activate distance constraint</translation>
    </message>
    <message>
        <source>Minimum distance [%1]</source>
        <translation>Minimum distance [%1]</translation>
    </message>
    <message>
        <source>Record when both active constraints are met</source>
        <translation>Record when both active constraints are met</translation>
    </message>
    <message>
        <source>When enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.</source>
        <translation>When enabled, vertices with only be recorded when both active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.</translation>
    </message>
    <message>
        <source>Start tracking</source>
        <translation>Start tracking</translation>
    </message>
    <message>
        <source>Cannot start track with empty values</source>
        <translation>Cannot start track with empty values</translation>
    </message>
    <message>
        <source>When both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.</source>
        <translation>When both constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.</translation>
    </message>
    <message>
        <source>Measure (M) value attached to vertices:</source>
        <translation>Measure (M) value attached to vertices:</translation>
    </message>
    <message>
        <source>Elapsed time (seconds since start of tracking)</source>
        <translation>Elapsed time (seconds since start of tracking)</translation>
    </message>
    <message>
        <source>Timestamp (milliseconds since epoch)</source>
        <translation>Timestamp (milliseconds since epoch)</translation>
    </message>
    <message>
        <source>Ground speed</source>
        <translation>Ground speed</translation>
    </message>
    <message>
        <source>Bearing</source>
        <translation>Bearing</translation>
    </message>
    <message>
        <source>Horizontal accuracy</source>
        <translation>Horizontal accuracy</translation>
    </message>
    <message>
        <source>Vertical accuracy</source>
        <translation>Vertical accuracy</translation>
    </message>
    <message>
        <source>PDOP</source>
        <translation>PDOP</translation>
    </message>
    <message>
        <source>HDOP</source>
        <translation>HDOP</translation>
    </message>
    <message>
        <source>VDOP</source>
        <translation>VDOP</translation>
    </message>
    <message>
        <source>To active the measurement functionality, make sure the vector layer&apos;s geometry type used for the tracking session has an M dimension.</source>
        <translation>To active the measurement functionality, make sure the vector layer&apos;s geometry type used for the tracking session has an M dimension.</translation>
    </message>
    <message>
        <source>Activate sensor constraint</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Record when all active constraints are met</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>When enabled, vertices with only be recorded when all active constraints are met. If the setting is disabled, individual constraints met will trigger a vertex addition.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>When the sensor constraint is activated alone, vertex additions will occur whenever sensor has captured new data.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>When all constraints are disabled, vertex additions will occur as frequently as delivered by the positioning device.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>UdpDeviceChooser</name>
    <message>
        <source>Address:</source>
        <translation>Address:</translation>
    </message>
    <message>
        <source>Port:</source>
        <translation>Port:</translation>
    </message>
</context>
<context>
    <name>UdpReceiver</name>
    <message>
        <source>Connecting…</source>
        <translation>Connecting…</translation>
    </message>
    <message>
        <source>Successfully connected</source>
        <translation>Successfully connected</translation>
    </message>
    <message>
        <source>Disconnected</source>
        <translation>Disconnected</translation>
    </message>
    <message>
        <source>Socket state %1</source>
        <translation>Socket state %1</translation>
    </message>
    <message>
        <source>Could not find the remote host</source>
        <translation>Could not find the remote host</translation>
    </message>
    <message>
        <source>Attempt to read or write from socket returned an error</source>
        <translation>Attempt to read or write from socket returned an error</translation>
    </message>
    <message>
        <source>The connection was refused by the remote hose</source>
        <translation>The connection was refused by the remote hose</translation>
    </message>
    <message>
        <source>UDP receiver error (%1)</source>
        <translation>UDP receiver error (%1)</translation>
    </message>
    <message>
        <source>The connection was refused by the remote host</source>
        <translation>The connection was refused by the remote host</translation>
    </message>
</context>
<context>
    <name>VariableEditor</name>
    <message>
        <source>Enter name</source>
        <translation>Enter name</translation>
    </message>
    <message>
        <source>Enter value</source>
        <translation>Enter value</translation>
    </message>
    <message>
        <source>Add a new variable</source>
        <translation>Add a new variable</translation>
    </message>
</context>
<context>
    <name>VertexEditorToolbar</name>
    <message>
        <source>Failed to save feature!</source>
        <translation>Failed to save feature!</translation>
    </message>
</context>
<context>
    <name>WelcomeScreen</name>
    <message>
        <source>We&apos;re sorry to hear that. Click on the button below to comment or seek support.</source>
        <translation>We&apos;re sorry to hear that. Click on the button below to comment or seek support.</translation>
    </message>
    <message>
        <source>Reach out</source>
        <translation>Reach out</translation>
    </message>
    <message>
        <source>Hey there, how do you like your experience with QField so far?</source>
        <translation>Hey there, how do you like your experience with QField so far?</translation>
    </message>
    <message>
        <source>That&apos;s great! We&apos;d love for you to click on the button below and leave a comment on the store.</source>
        <translation>That&apos;s great! We&apos;d love for you to click on the button below and leave a comment on the store.</translation>
    </message>
    <message>
        <source>Rate us</source>
        <translation>Rate us</translation>
    </message>
    <message>
        <source>Anonymized metrics collection has been disabled. You can re-enable through the settings panel.</source>
        <translation>Anonymized metrics collection has been disabled. You can re-enable through the settings panel.</translation>
    </message>
    <message>
        <source>To improve stability for everyone, QField collects and sends anonymized metrics.</source>
        <translation>To improve stability for everyone, QField collects and sends anonymized metrics.</translation>
    </message>
    <message>
        <source>I agree</source>
        <translation>I agree</translation>
    </message>
    <message>
        <source>I prefer not</source>
        <translation>I prefer not</translation>
    </message>
    <message>
        <source>QFieldCloud projects</source>
        <translation>QFieldCloud projects</translation>
    </message>
    <message>
        <source>Open local file</source>
        <translation>Open local file</translation>
    </message>
    <message>
        <source>Recent Projects</source>
        <translation>Recent Projects</translation>
    </message>
    <message>
        <source>Last session</source>
        <translation>Last session</translation>
    </message>
    <message>
        <source>Base map project</source>
        <translation>Base map project</translation>
    </message>
    <message>
        <source>Base Map Project</source>
        <translation>Base Map Project</translation>
    </message>
    <message>
        <source>Remove from Recent Projects</source>
        <translation>Remove from Recent Projects</translation>
    </message>
    <message>
        <source>Welcome to QField. First time using this application? Try out sample projects listed in the list below.</source>
        <translation>Welcome to QField. First time using this application? Try out sample projects listed in the list below.</translation>
    </message>
    <message>
        <source>Welcome back to QField.</source>
        <translation>Welcome back to QField.</translation>
    </message>
    <message>
        <source>Default project</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Base map</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Default Project</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Individual Datasets Base Map</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Load default project on launch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Load last opened project on launch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Recent Project Actions</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ordered_relation_editor</name>
    <message>
        <source>Ensure contraints</source>
        <translation>Ensure contraints</translation>
    </message>
    <message>
        <source>Adding child feature in layer %1</source>
        <translation>Adding child feature in layer %1</translation>
    </message>
    <message>
        <source>Cannot add child feature: parent primary keys are not available</source>
        <translation>Cannot add child feature: parent primary keys are not available</translation>
    </message>
    <message>
        <source>Unlink feature %1 (%2) of %3</source>
        <translation>Unlink feature %1 (%2) of %3</translation>
    </message>
    <message>
        <source>Delete feature %1 (%2) on %3</source>
        <translation>Delete feature %1 (%2) on %3</translation>
    </message>
    <message>
        <source>Should the feature &lt;b&gt;%1 (%2)&lt;/b&gt; of layer &lt;b&gt;%3&lt;/b&gt; be unlinked?&lt;br&gt;&lt;i&gt;(The connection will be deleted on layer &lt;b&gt;%4&lt;/b&gt;)&lt;/i&gt;</source>
        <translation>Should the feature &lt;b&gt;%1 (%2)&lt;/b&gt; of layer &lt;b&gt;%3&lt;/b&gt; be unlinked?&lt;br&gt;&lt;i&gt;(The connection will be deleted on layer &lt;b&gt;%4&lt;/b&gt;)&lt;/i&gt;</translation>
    </message>
    <message>
        <source>Should the feature &lt;b&gt;%1 (%2)&lt;/b&gt; on layer &lt;b&gt;%3&lt;/b&gt; be deleted?</source>
        <translation>Should the feature &lt;b&gt;%1 (%2)&lt;/b&gt; on layer &lt;b&gt;%3&lt;/b&gt; be deleted?</translation>
    </message>
    <message>
        <source>Failed to delete referencing feature</source>
        <translation>Failed to delete referencing feature</translation>
    </message>
</context>
<context>
    <name>qgismobileapp</name>
    <message>
        <source>You are now in browse mode</source>
        <translation>You are now in browse mode</translation>
    </message>
    <message>
        <source>You are now in digitize mode on layer %1</source>
        <translation>You are now in digitize mode on layer %1</translation>
    </message>
    <message>
        <source>You are now in digitize mode</source>
        <translation>You are now in digitize mode</translation>
    </message>
    <message>
        <source>You are now in measure mode</source>
        <translation>You are now in measure mode</translation>
    </message>
    <message>
        <source>Lon</source>
        <translation>Lon</translation>
    </message>
    <message>
        <source>Lat</source>
        <translation>Lat</translation>
    </message>
    <message>
        <source>Segment</source>
        <translation>Segment</translation>
    </message>
    <message>
        <source>Perimeter</source>
        <translation>Perimeter</translation>
    </message>
    <message>
        <source>Length</source>
        <translation>Length</translation>
    </message>
    <message>
        <source>Area</source>
        <translation>Area</translation>
    </message>
    <message>
        <source>Close measure tool</source>
        <translation>Close measure tool</translation>
    </message>
    <message>
        <source>Stop editing</source>
        <translation>Stop editing</translation>
    </message>
    <message>
        <source>Cancel addition</source>
        <translation>Cancel addition</translation>
    </message>
    <message>
        <source>Topological editing turned on</source>
        <translation>Topological editing turned on</translation>
    </message>
    <message>
        <source>Topological editing turned off</source>
        <translation>Topological editing turned off</translation>
    </message>
    <message>
        <source>Freehand digitizing turned on</source>
        <translation>Freehand digitizing turned on</translation>
    </message>
    <message>
        <source>Freehand digitizing turned off</source>
        <translation>Freehand digitizing turned off</translation>
    </message>
    <message>
        <source>Coordinate cursor now locked to position</source>
        <translation>Coordinate cursor now locked to position</translation>
    </message>
    <message>
        <source>Coordinate cursor unlocked</source>
        <translation>Coordinate cursor unlocked</translation>
    </message>
    <message>
        <source>Received position</source>
        <translation>Received position</translation>
    </message>
    <message>
        <source>Searching for position</source>
        <translation>Searching for position</translation>
    </message>
    <message>
        <source>Canvas follows location</source>
        <translation>Canvas follows location</translation>
    </message>
    <message>
        <source>Waiting for location</source>
        <translation>Waiting for location</translation>
    </message>
    <message>
        <source>Positioning activated</source>
        <translation>Positioning activated</translation>
    </message>
    <message>
        <source>Positioning turned off</source>
        <translation>Positioning turned off</translation>
    </message>
    <message>
        <source>Canvas stopped following location</source>
        <translation>Canvas stopped following location</translation>
    </message>
    <message>
        <source>Failed to create feature!</source>
        <translation>Failed to create feature!</translation>
    </message>
    <message>
        <source>Failed to save feature!</source>
        <translation>Failed to save feature!</translation>
    </message>
    <message>
        <source>Main Menu</source>
        <translation>Main Menu</translation>
    </message>
    <message>
        <source>Measure Tool</source>
        <translation>Measure Tool</translation>
    </message>
    <message>
        <source>Print to PDF</source>
        <translation>Print to PDF</translation>
    </message>
    <message>
        <source>Printing to PDF</source>
        <translation>Printing to PDF</translation>
    </message>
    <message>
        <source>Go to Home Screen</source>
        <translation>Go to Home Screen</translation>
    </message>
    <message>
        <source>Open Project Folder</source>
        <translation>Open Project Folder</translation>
    </message>
    <message>
        <source>Open Project</source>
        <translation>Open Project</translation>
    </message>
    <message>
        <source>Settings</source>
        <translation>Settings</translation>
    </message>
    <message>
        <source>Message Log</source>
        <translation>Message Log</translation>
    </message>
    <message>
        <source>About QField</source>
        <translation>About QField</translation>
    </message>
    <message>
        <source>Select template below</source>
        <translation>Select template below</translation>
    </message>
    <message>
        <source>Activating positioning service</source>
        <translation>Activating positioning service</translation>
    </message>
    <message>
        <source>QField has no permissions to use positioning.</source>
        <translation>QField has no permissions to use positioning.</translation>
    </message>
    <message>
        <source>Map Canvas Options</source>
        <translation>Map Canvas Options</translation>
    </message>
    <message>
        <source>Add Bookmark</source>
        <translation>Add Bookmark</translation>
    </message>
    <message>
        <source>Set as Destination</source>
        <translation>Set as Destination</translation>
    </message>
    <message>
        <source>Add Bookmark at Coordinates</source>
        <translation>Add Bookmark at Coordinates</translation>
    </message>
    <message>
        <source>Untitled bookmark</source>
        <translation>Untitled bookmark</translation>
    </message>
    <message>
        <source>Set Coordinates as Destination</source>
        <translation>Set Coordinates as Destination</translation>
    </message>
    <message>
        <source>Copy Coordinates</source>
        <translation>Copy Coordinates</translation>
    </message>
    <message>
        <source>X</source>
        <translation>X</translation>
    </message>
    <message>
        <source>Y</source>
        <translation>Y</translation>
    </message>
    <message>
        <source>Coordinates copied to clipboard</source>
        <translation>Coordinates copied to clipboard</translation>
    </message>
    <message>
        <source>Precise View Settings</source>
        <translation>Precise View Settings</translation>
    </message>
    <message>
        <source>0.25m Precision</source>
        <translation>0.25m Precision</translation>
    </message>
    <message>
        <source>0.5m Precision</source>
        <translation>0.5m Precision</translation>
    </message>
    <message>
        <source>1m Precision</source>
        <translation>1m Precision</translation>
    </message>
    <message>
        <source>2.5m Precision</source>
        <translation>2.5m Precision</translation>
    </message>
    <message>
        <source>5m Precision</source>
        <translation>5m Precision</translation>
    </message>
    <message>
        <source>10m Precision</source>
        <translation>10m Precision</translation>
    </message>
    <message>
        <source>Always Show Precise View</source>
        <translation>Always Show Precise View</translation>
    </message>
    <message>
        <source>Center to Location</source>
        <translation>Center to Location</translation>
    </message>
    <message>
        <source>Add Bookmark at Location</source>
        <translation>Add Bookmark at Location</translation>
    </message>
    <message>
        <source>Copy Location Coordinates</source>
        <translation>Copy Location Coordinates</translation>
    </message>
    <message>
        <source>Signed out</source>
        <translation>Signed out</translation>
    </message>
    <message>
        <source>Signed in</source>
        <translation>Signed in</translation>
    </message>
    <message>
        <source>Set As Destination</source>
        <translation>Set As Destination</translation>
    </message>
    <message>
        <source>Navigation Options</source>
        <translation>Navigation Options</translation>
    </message>
    <message>
        <source>Clear Destination</source>
        <translation>Clear Destination</translation>
    </message>
    <message>
        <source>%1 Precision</source>
        <translation>%1 Precision</translation>
    </message>
    <message>
        <source>Enable Audio Proximity Feedback</source>
        <translation>Enable Audio Proximity Feedback</translation>
    </message>
    <message>
        <source>Positioning Options</source>
        <translation>Positioning Options</translation>
    </message>
    <message>
        <source>Enable Positioning</source>
        <translation>Enable Positioning</translation>
    </message>
    <message>
        <source>Show Position Information</source>
        <translation>Show Position Information</translation>
    </message>
    <message>
        <source>Positioning Settings</source>
        <translation>Positioning Settings</translation>
    </message>
    <message>
        <source>Center to Current Location</source>
        <translation>Center to Current Location</translation>
    </message>
    <message>
        <source>Add Bookmark at Current Location</source>
        <translation>Add Bookmark at Current Location</translation>
    </message>
    <message>
        <source>Current location unknown</source>
        <translation>Current location unknown</translation>
    </message>
    <message>
        <source>My location</source>
        <translation>My location</translation>
    </message>
    <message>
        <source>Copy Current Location</source>
        <translation>Copy Current Location</translation>
    </message>
    <message>
        <source>Accuracy</source>
        <translation>Accuracy</translation>
    </message>
    <message>
        <source>N/A</source>
        <translation>N/A</translation>
    </message>
    <message>
        <source>Current location copied to clipboard</source>
        <translation>Current location copied to clipboard</translation>
    </message>
    <message>
        <source>Current layer switched to the one holding the selected geometry.</source>
        <translation>Current layer switched to the one holding the selected geometry.</translation>
    </message>
    <message>
        <source>Editing of multi geometry layer is not supported yet.</source>
        <translation>Editing of multi geometry layer is not supported yet.</translation>
    </message>
    <message>
        <source>Loading %1</source>
        <translation>Loading %1</translation>
    </message>
    <message>
        <source>Logged out</source>
        <translation>Logged out</translation>
    </message>
    <message>
        <source>Connecting...</source>
        <translation>Connecting...</translation>
    </message>
    <message>
        <source>Logged in</source>
        <translation>Logged in</translation>
    </message>
    <message>
        <source>Project %1 failed to download</source>
        <translation>Project %1 failed to download</translation>
    </message>
    <message>
        <source>Project %1 successfully downloaded, it&apos;s now available to open</source>
        <translation>Project %1 successfully downloaded, it&apos;s now available to open</translation>
    </message>
    <message>
        <source>Changes failed to reach QFieldCloud: %1</source>
        <translation>Changes failed to reach QFieldCloud: %1</translation>
    </message>
    <message>
        <source>Changes successfully pushed to QFieldCloud</source>
        <translation>Changes successfully pushed to QFieldCloud</translation>
    </message>
    <message>
        <source>Press back again to close project and app</source>
        <translation>Press back again to close project and app</translation>
    </message>
    <message>
        <source>Positioning error: %1</source>
        <translation>Positioning error: %1</translation>
    </message>
    <message>
        <source>Azimuth</source>
        <translation>Azimuth</translation>
    </message>
    <message>
        <source>Lock Screen</source>
        <translation>Lock Screen</translation>
    </message>
    <message>
        <source>Print to Image</source>
        <translation>Print to Image</translation>
    </message>
    <message>
        <source>Printing...</source>
        <translation>Printing...</translation>
    </message>
    <message>
        <source>Print</source>
        <translation>Print</translation>
    </message>
    <message>
        <source>Positioning device error: %1</source>
        <translation>Positioning device error: %1</translation>
    </message>
    <message>
        <source>Canvas follows location and compass orientation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Importing %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Import URL failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Sensors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select sensor below</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Disconnecting sensor &apos;%1&apos;...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Connecting sensor &apos;%1&apos;...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select layout below</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Sensor error: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>No print layout available</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Learn more</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>No sensor available</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>relation_editor</name>
    <message>
        <source>Ensure contraints</source>
        <translation>Ensure contraints</translation>
    </message>
    <message>
        <source>Adding child feature in layer %1</source>
        <translation>Adding child feature in layer %1</translation>
    </message>
    <message>
        <source>Cannot add child feature: parent primary keys are not available</source>
        <translation>Cannot add child feature: parent primary keys are not available</translation>
    </message>
    <message>
        <source>Unlink feature %1 (%2) of %3</source>
        <translation>Unlink feature %1 (%2) of %3</translation>
    </message>
    <message>
        <source>Delete feature %1 (%2) on %3</source>
        <translation>Delete feature %1 (%2) on %3</translation>
    </message>
    <message>
        <source>Should the feature &lt;b&gt;%1 (%2)&lt;/b&gt; of layer &lt;b&gt;%3&lt;/b&gt; be unlinked?&lt;br&gt;&lt;i&gt;(The connection will be deleted on layer &lt;b&gt;%4&lt;/b&gt;)&lt;/i&gt;</source>
        <translation>Should the feature &lt;b&gt;%1 (%2)&lt;/b&gt; of layer &lt;b&gt;%3&lt;/b&gt; be unlinked?&lt;br&gt;&lt;i&gt;(The connection will be deleted on layer &lt;b&gt;%4&lt;/b&gt;)&lt;/i&gt;</translation>
    </message>
    <message>
        <source>Should the feature &lt;b&gt;%1 (%2)&lt;/b&gt; on layer &lt;b&gt;%3&lt;/b&gt; be deleted?</source>
        <translation>Should the feature &lt;b&gt;%1 (%2)&lt;/b&gt; on layer &lt;b&gt;%3&lt;/b&gt; be deleted?</translation>
    </message>
    <message>
        <source>Failed to delete referencing feature</source>
        <translation>Failed to delete referencing feature</translation>
    </message>
</context>
</TS>