MTConnectError_1.8_1.0.xsd

<?xml version="1.0" encoding="UTF-8"?>
<!--
Copyright (c) 2008-2019, AMT – The Association For Manufacturing Technology (“AMT”)
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
    * Redistributions of source code must retain the above copyright
      notice, this list of conditions and the following disclaimer.
    * Redistributions in binary form must reproduce the above copyright
      notice, this list of conditions and the following disclaimer in the
      documentation and/or other materials provided with the distribution.
    * Neither the name of the AMT nor the
      names of its contributors may be used to endorse or promote products
      derived from this software without specific prior written permission.

DISCLAIMER OF WARRANTY. ALL MTCONNECT MATERIALS AND SPECIFICATIONS PROVIDED
BY AMT, MTCONNECT OR ANY PARTICIPANT TO YOU OR ANY PARTY ARE PROVIDED "AS IS"
AND WITHOUT ANY WARRANTY OF ANY KIND. AMT, MTCONNECT, AND EACH OF THEIR
RESPECTIVE MEMBERS, OFFICERS, DIRECTORS, AFFILIATES, SPONSORS, AND AGENTS
(COLLECTIVELY, THE "AMT PARTIES") AND PARTICIPANTS MAKE NO REPRESENTATION OR
WARRANTY OF ANY KIND WHATSOEVER RELATING TO THESE MATERIALS, INCLUDING, WITHOUT
LIMITATION, ANY EXPRESS OR IMPLIED WARRANTY OF NONINFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. 

LIMITATION OF LIABILITY. IN NO EVENT SHALL AMT, MTCONNECT, ANY OTHER AMT
PARTY, OR ANY PARTICIPANT BE LIABLE FOR THE COST OF PROCURING SUBSTITUTE GOODS
OR SERVICES, LOST PROFITS, LOSS OF USE, LOSS OF DATA OR ANY INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OR OTHER DIRECT DAMAGES,
WHETHER UNDER CONTRACT, TORT, WARRANTY OR OTHERWISE, ARISING IN ANY WAY OUT OF
THIS AGREEMENT, USE OR INABILITY TO USE MTCONNECT MATERIALS, WHETHER OR NOT
SUCH PARTY HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
-->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:mtconnect.org:MTConnectError:1.8" xmlns:mt="urn:mtconnect.org:MTConnectError:1.8" targetNamespace="urn:mtconnect.org:MTConnectError:1.8" elementFormDefault="qualified" attributeFormDefault="unqualified">
	<xs:element name="MTConnectError" type="MTConnectErrorType">
		<xs:annotation>
			<xs:documentation>
        The root node for MTConnect
      </xs:documentation>
		</xs:annotation>
	</xs:element>
	<xs:simpleType name="SenderType">
		<xs:annotation>
			<xs:documentation>
        The sender of the message
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string"/>
	</xs:simpleType>
	<xs:simpleType name="CreationTimeType">
		<xs:annotation>
			<xs:documentation>
        The date and time the document was created
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:dateTime"/>
	</xs:simpleType>
	<xs:simpleType name="SequenceType">
		<xs:annotation>
			<xs:documentation>
        A sequence number
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:integer">
			<xs:minInclusive value="1"/>
			<xs:maxExclusive value="18446744073709551615"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="TestIndicatorType">
		<xs:annotation>
			<xs:documentation>
        A debugging flag for testing.
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:boolean"/>
	</xs:simpleType>
	<xs:simpleType name="InstanceIdType">
		<xs:annotation>
			<xs:documentation>
        The instance number of the agent, used for fault tolerance
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:integer">
			<xs:minInclusive value="1"/>
			<xs:maxExclusive value="18446744073709551615"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="BufferSizeType">
		<xs:annotation>
			<xs:documentation>
        The size of the agents buffer
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:integer">
			<xs:minInclusive value="1"/>
			<xs:maxExclusive value="4294967295"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="TimestampType">
		<xs:annotation>
			<xs:documentation>
        The time the sample was reported
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:dateTime"/>
	</xs:simpleType>
	<xs:simpleType name="OccurrenceTimeType">
		<xs:annotation>
			<xs:documentation>
        The time a sample occurred
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:dateTime"/>
	</xs:simpleType>
	<xs:simpleType name="VersionType">
		<xs:annotation>
			<xs:documentation>
        A version number
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:NMTOKEN"/>
	</xs:simpleType>
	<xs:simpleType name="NameType">
		<xs:annotation>
			<xs:documentation>
        A short name for any element
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string"/>
	</xs:simpleType>
	<xs:simpleType name="UuidType">
		<xs:annotation>
			<xs:documentation>
        A universally unique id that uniquely identifies the element for
        it&apos;s entire life
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string"/>
	</xs:simpleType>
	<xs:simpleType name="SerialNumberAttrType">
		<xs:annotation>
			<xs:documentation>
        A serial number for a piece of equipment
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string"/>
	</xs:simpleType>
	<xs:simpleType name="ItemSourceType">
		<xs:annotation>
			<xs:documentation>
        The measurement source
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string"/>
	</xs:simpleType>
	<xs:simpleType name="RateType">
		<xs:annotation>
			<xs:documentation>
        A sample rate in milliseconds per sample
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:float"/>
	</xs:simpleType>
	<xs:simpleType name="ComponentIdType">
		<xs:annotation>
			<xs:documentation>
        The id of the component (maps to the id from probe)
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:ID"/>
	</xs:simpleType>
	<xs:simpleType name="IDType">
		<xs:annotation>
			<xs:documentation>
        An identifier
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:ID"/>
	</xs:simpleType>
	<xs:simpleType name="SignificantDigitsValueType">
		<xs:annotation>
			<xs:documentation>
        The number significant digits
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:integer"/>
	</xs:simpleType>
	<xs:simpleType name="CompositionIdType">
		<xs:annotation>
			<xs:documentation>
        The item&apos;s reference to the Device model composition
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:IDREF"/>
	</xs:simpleType>
	<xs:simpleType name="DurationTimeType">
		<xs:annotation>
			<xs:documentation>
        A length of time in seconds
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:float"/>
	</xs:simpleType>
	<xs:simpleType name="RemovedType">
		<xs:annotation>
			<xs:documentation>
        A flag indicating the item has been removed
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:boolean"/>
	</xs:simpleType>
	<xs:simpleType name="KeyType">
		<xs:annotation>
			<xs:documentation>
        The key for adata set
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:NMTOKEN"/>
	</xs:simpleType>
	<xs:simpleType name="DeviceModelChangeTimeType">
		<xs:annotation>
			<xs:documentation>
        A timestamp in 8601 format of the last update of the Device information
        for any device
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:dateTime"/>
	</xs:simpleType>
	<xs:simpleType name="AssetIdType">
		<xs:annotation>
			<xs:documentation>
        The unique id of the asset
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string"/>
	</xs:simpleType>
	<xs:simpleType name="AssetAttrTypeType">
		<xs:annotation>
			<xs:documentation>
        An asset type
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string"/>
	</xs:simpleType>
	<xs:simpleType name="AssetBufferSizeType">
		<xs:annotation>
			<xs:documentation>
        The maximum number of assets
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:integer">
			<xs:minInclusive value="1"/>
			<xs:maxExclusive value="4294967295"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="AssetCountAttrType">
		<xs:annotation>
			<xs:documentation>
        The number of assets
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:integer">
			<xs:minInclusive value="0"/>
			<xs:maxExclusive value="4294967295"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="FloatListValueType">
		<xs:annotation>
			<xs:documentation>
        Common floating point sample value
      </xs:documentation>
		</xs:annotation>
		<xs:list>
			<xs:simpleType>
				<xs:restriction base="xs:float"/>
			</xs:simpleType>
		</xs:list>
	</xs:simpleType>
	<xs:simpleType name="ThreeSpaceValueType">
		<xs:annotation>
			<xs:documentation>
        A three dimensional value &apos;X Y Z&apos; or &apos;A B C&apos;
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="FloatListValueType">
			<xs:maxLength value="3"/>
			<xs:minLength value="3"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="DescriptionTextType">
		<xs:annotation>
			<xs:documentation>
        A description
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string"/>
	</xs:simpleType>
	<xs:simpleType name="DataItemEnumExtType">
		<xs:annotation>
			<xs:documentation>
        Extended tyoe for The types of measurements available
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:pattern value="[a-ln-z][a-z]*:[A-Z_0-9]+"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="DataItemEnumEnum">
		<xs:annotation>
			<xs:documentation>
        The types of measurements available
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:enumeration value="ACCELERATION">
				<xs:annotation>
					<xs:documentation>
            Positive rate of change of velocity.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ACCUMULATED_TIME">
				<xs:annotation>
					<xs:documentation>
            The measurement of accumulated time for an activity or event.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="AMPERAGE">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED** in *Version 1.6*. Replaced by `AMPERAGE_AC` and
            `AMPERAGE_DC`. The measurement of electrical current.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ANGLE">
				<xs:annotation>
					<xs:documentation>
            The measurement of angular position.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ANGULAR_ACCELERATION">
				<xs:annotation>
					<xs:documentation>
            Positive rate of change of angular velocity.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ANGULAR_VELOCITY">
				<xs:annotation>
					<xs:documentation>
            The measurement of the rate of change of angular position.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="AXIS_FEEDRATE">
				<xs:annotation>
					<xs:documentation>
            The measurement of the feedrate of a linear axis.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CAPACITY_FLUID">
				<xs:annotation>
					<xs:documentation>
            The fluid capacity of an object or container.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CAPACITY_SPATIAL">
				<xs:annotation>
					<xs:documentation>
            The geometric capacity of an object or container.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CLOCK_TIME">
				<xs:annotation>
					<xs:documentation>
            The value provided by a timing device at a specific point in time.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CONCENTRATION">
				<xs:annotation>
					<xs:documentation>
            The measurement of the percentage of one component within a mixture
            of components
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CONDUCTIVITY">
				<xs:annotation>
					<xs:documentation>
            The measurement of the ability of a material to conduct electricity.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CUTTING_SPEED">
				<xs:annotation>
					<xs:documentation>
            The speed difference (relative velocity) between the cutting
            mechanism and the surface of the workpiece it is operating on.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DENSITY">
				<xs:annotation>
					<xs:documentation>
            The volumetric mass of a material per unit volume of that material.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEPOSITION_ACCELERATION_VOLUMETRIC">
				<xs:annotation>
					<xs:documentation>
            The rate of change in spatial volume of material deposited in an
            additive manufacturing process.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEPOSITION_DENSITY">
				<xs:annotation>
					<xs:documentation>
            The density of the material deposited in an additive manufacturing
            process per unit of volume.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEPOSITION_MASS">
				<xs:annotation>
					<xs:documentation>
            The mass of the material deposited in an additive manufacturing
            process.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEPOSITION_RATE_VOLUMETRIC">
				<xs:annotation>
					<xs:documentation>
            The rate at which a spatial volume of material is deposited in an
            additive manufacturing process.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEPOSITION_VOLUME">
				<xs:annotation>
					<xs:documentation>
            The spatial volume of material to be deposited in an additive
            manufacturing process.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DISPLACEMENT">
				<xs:annotation>
					<xs:documentation>
            The measurement of the change in position of an object.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ELECTRICAL_ENERGY">
				<xs:annotation>
					<xs:documentation>
            The value of the {{block(Wattage)}} used or generated by a component
            over an interval of time.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="EQUIPMENT_TIMER">
				<xs:annotation>
					<xs:documentation>
            The measurement of the amount of time a piece of equipment or a
            sub-part of a piece of equipment has performed specific activities.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FILL_LEVEL">
				<xs:annotation>
					<xs:documentation>
            The measurement of the amount of a substance remaining compared to
            the planned maximum amount of that substance.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FLOW">
				<xs:annotation>
					<xs:documentation>
            The measurement of the rate of flow of a fluid.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FREQUENCY">
				<xs:annotation>
					<xs:documentation>
            The measurement of the number of occurrences of a repeating event
            per unit time.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="GLOBAL_POSITION">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED** in Version 1.1
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LENGTH">
				<xs:annotation>
					<xs:documentation>
            The measurement of the length of an object.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LEVEL">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED** in *Version 1.2*. See `FILL_LEVEL`. Represents the
            level of a resource.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LINEAR_FORCE">
				<xs:annotation>
					<xs:documentation>
            A {{term(Force)}} applied to a mass in one direction only.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LOAD">
				<xs:annotation>
					<xs:documentation>
            The measurement of the actual versus the standard rating of a piece
            of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MASS">
				<xs:annotation>
					<xs:documentation>
            The measurement of the mass of an object(s) or an amount of
            material.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PATH_FEEDRATE">
				<xs:annotation>
					<xs:documentation>
            The measurement of the feedrate for the axes, or a single axis,
            associated with a {{block(Path)}} component-a vector.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PATH_FEEDRATE_PER_REVOLUTION">
				<xs:annotation>
					<xs:documentation>
            The feedrate for the axes, or a single axis.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PATH_POSITION">
				<xs:annotation>
					<xs:documentation>
            A measured or calculated position of a control point associated with
            a {{block(Controller)}} element, or {{block(Path)}} element if
            provided, of a piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PH">
				<xs:annotation>
					<xs:documentation>
            A measure of the acidity or alkalinity of a solution.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="POSITION">
				<xs:annotation>
					<xs:documentation>
            A measured or calculated position of a {{block(Component)}} element
            as reported by a piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="POWER_FACTOR">
				<xs:annotation>
					<xs:documentation>
            The measurement of the ratio of real power flowing to a load to the
            apparent power in that AC circuit.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PRESSURE">
				<xs:annotation>
					<xs:documentation>
            The force per unit area measured relative to atmospheric pressure.
            Commonly referred to as gauge pressure.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROCESS_TIMER">
				<xs:annotation>
					<xs:documentation>
            The measurement of the amount of time a piece of equipment has
            performed different types of activities associated with the process
            being performed at that piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="RESISTANCE">
				<xs:annotation>
					<xs:documentation>
            The measurement of the degree to which a substance opposes the
            passage of an electric current.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ROTARY_VELOCITY">
				<xs:annotation>
					<xs:documentation>
            The measurement of the rotational speed of a rotary axis.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SOUND_LEVEL">
				<xs:annotation>
					<xs:documentation>
            The measurement of a sound level or sound pressure level relative to
            atmospheric pressure.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SPINDLE_SPEED">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED** in *Version 1.2*. Replaced by `ROTARY_VELOCITY`. The
            rotational speed of the rotary axis.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="STRAIN">
				<xs:annotation>
					<xs:documentation>
            The measurement of the amount of deformation per unit length of an
            object when a load is applied.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TEMPERATURE">
				<xs:annotation>
					<xs:documentation>
            The measurement of temperature.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TENSION">
				<xs:annotation>
					<xs:documentation>
            The measurement of a force that stretches or elongates an object.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TILT">
				<xs:annotation>
					<xs:documentation>
            The measurement of angular displacement.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TORQUE">
				<xs:annotation>
					<xs:documentation>
            The measurement of the turning force exerted on an object or by an
            object.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VELOCITY">
				<xs:annotation>
					<xs:documentation>
            The measurement of the rate of change of position of a
            {{block(Component)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VISCOSITY">
				<xs:annotation>
					<xs:documentation>
            The measurement of a fluids resistance to flow.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLTAGE">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED** in *Version 1.6*. Replaced by `VOLTAGE_AC` and
            `VOLTAGE_DC`. The measurement of electrical potential between two
            points.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLT_AMPERE">
				<xs:annotation>
					<xs:documentation>
            The measurement of the apparent power in an electrical circuit,
            equal to the product of root-mean-square (RMS) voltage and RMS
            current (commonly referred to as VA).
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLT_AMPERE_REACTIVE">
				<xs:annotation>
					<xs:documentation>
            The measurement of reactive power in an AC electrical circuit
            (commonly referred to as VAR).
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLUME_FLUID">
				<xs:annotation>
					<xs:documentation>
            The fluid volume of an object or container.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLUME_SPATIAL">
				<xs:annotation>
					<xs:documentation>
            The geometric volume of an object or container.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WATTAGE">
				<xs:annotation>
					<xs:documentation>
            The measurement of power flowing through or dissipated by an
            electrical circuit or piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="AMPERAGE_AC">
				<xs:annotation>
					<xs:documentation>
            The measurement of an electrical current that reverses direction at
            regular short intervals.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="AMPERAGE_DC">
				<xs:annotation>
					<xs:documentation>
            The measurement of an electric current flowing in one direction
            only.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLTAGE_AC">
				<xs:annotation>
					<xs:documentation>
            The measurement of the electrical potential between two points in an
            electrical circuit in which the current periodically reverses
            direction.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLTAGE_DC">
				<xs:annotation>
					<xs:documentation>
            The measurement of the electrical potential between two points in an
            electrical circuit in which the current is unidirectional.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="X_DIMENSION">
				<xs:annotation>
					<xs:documentation>
            Measured dimension of an entity relative to the X direction of the
            referenced coordinate system. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="Y_DIMENSION">
				<xs:annotation>
					<xs:documentation>
            Measured dimension of an entity relative to the Y direction of the
            referenced coordinate system.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="Z_DIMENSION">
				<xs:annotation>
					<xs:documentation>
            Measured dimension of an entity relative to the Z direction of the
            referenced coordinate system.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DIAMETER">
				<xs:annotation>
					<xs:documentation>
            The measured dimension of a diameter.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ORIENTATION">
				<xs:annotation>
					<xs:documentation>
            A measured or calculated orientation of a plane or vector relative
            to a cartesian coordinate system.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="HUMIDITY_RELATIVE">
				<xs:annotation>
					<xs:documentation>
            The amount of water vapor present expressed as a percent to reach
            saturation at the same temperature.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="HUMIDITY_ABSOLUTE">
				<xs:annotation>
					<xs:documentation>
            The amount of water vapor expressed in grams per cubic meter.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="HUMIDITY_SPECIFIC">
				<xs:annotation>
					<xs:documentation>
            The ratio of the water vapor present over the total weight of the
            water vapor and air present expressed as a percent.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OBSERVATION_UPDATE_RATE">
				<xs:annotation>
					<xs:documentation>
            The average rate of change of values for data items in the MTConnect
            streams. The average is computed over a rolling window defined by
            the implementation.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ASSET_UPDATE_RATE">
				<xs:annotation>
					<xs:documentation>
            The average rate of change of values for assets in the MTConnect
            streams. The average is computed over a rolling window defined by
            the implementation.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PRESSURIZATION_RATE">
				<xs:annotation>
					<xs:documentation>
            The change of pressure per unit time.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DECELERATION">
				<xs:annotation>
					<xs:documentation>
            Negative rate of change of velocity.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ANGULAR_DECELERATION">
				<xs:annotation>
					<xs:documentation>
            Negative rate of change of angular velocity.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PRESSURE_ABSOLUTE">
				<xs:annotation>
					<xs:documentation>
            The force per unit area measured relative to a vacuum.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ACTIVE_AXES">
				<xs:annotation>
					<xs:documentation>
            The set of axes currently associated with a {{block(Path)}} or
            {{block(Controller)}} {{term(Structural Element)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ACTUATOR_STATE">
				<xs:annotation>
					<xs:documentation>
            Represents the operational state of an apparatus for moving or
            controlling a mechanism or system.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ALARM">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED:** Replaced with {{block(CONDITION)}} category data
            items in Version 1.1.0.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ASSET_CHANGED">
				<xs:annotation>
					<xs:documentation>
            The {{block(assetId)}} of the asset that has been added or changed.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ASSET_REMOVED">
				<xs:annotation>
					<xs:documentation>
            The {{block(assetId)}} of the asset that has been removed.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="AVAILABILITY">
				<xs:annotation>
					<xs:documentation>
            Represents the {{term(Agent)}}&apos;s ability to communicate with
            the data source.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="AXIS_COUPLING">
				<xs:annotation>
					<xs:documentation>
            Describes the way the axes will be associated to each other. This is
            used in conjunction with {{block(COUPLED_AXES)}} to indicate the way
            they are interacting.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="AXIS_FEEDRATE_OVERRIDE">
				<xs:annotation>
					<xs:documentation>
            The value of a signal or calculation issued to adjust the feedrate
            of an individual linear type axis.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="AXIS_INTERLOCK">
				<xs:annotation>
					<xs:documentation>
            An indicator of the state of the axis lockout function when power
            has been removed and the axis is allowed to move freely.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="AXIS_STATE">
				<xs:annotation>
					<xs:documentation>
            An indicator of the controlled state of a {{block(Linear)}} or
            {{block(Rotary)}} component representing an axis.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="BLOCK">
				<xs:annotation>
					<xs:documentation>
            The line of code or command being executed by a
            {{block(Controller)}} {{term(Structural Element)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="BLOCK_COUNT">
				<xs:annotation>
					<xs:documentation>
            The total count of the number of blocks of program code that have
            been executed since execution started.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CHUCK_INTERLOCK">
				<xs:annotation>
					<xs:documentation>
            An indication of the operational condition of the interlock function
            for an electronically controller chuck.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CHUCK_STATE">
				<xs:annotation>
					<xs:documentation>
            An indication of the operating state of a mechanism that holds a
            part or stock material during a manufacturing process. It may also
            represent a mechanism that holds any other mechanism in place within
            a piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CLOSE_CHUCK">
				<xs:annotation>
					<xs:documentation>
            Service to close a chuck.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CLOSE_DOOR">
				<xs:annotation>
					<xs:documentation>
            Service to close a door.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CODE">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED** in *Version 1.1*. The programmatic code being
            executed.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="COMPOSITION_STATE">
				<xs:annotation>
					<xs:documentation>
            An indication of the operating condition of a mechanism represented
            by a {{block(Composition)}} type element.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CONTROLLER_MODE">
				<xs:annotation>
					<xs:documentation>
            The current operating mode of the {{block(Controller)}} component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CONTROLLER_MODE_OVERRIDE">
				<xs:annotation>
					<xs:documentation>
            A setting or operator selection that changes the behavior of a piece
            of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="COUPLED_AXES">
				<xs:annotation>
					<xs:documentation>
            Refers to the set of associated axes.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DATE_CODE">
				<xs:annotation>
					<xs:documentation>
            The time and date code associated with a material or other physical
            item.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEVICE_UUID">
				<xs:annotation>
					<xs:documentation>
            The identifier of another piece of equipment that is temporarily
            associated with a component of this piece of equipment to perform a
            particular function.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DIRECTION">
				<xs:annotation>
					<xs:documentation>
            An indication of a fault associated with the direction of motion of
            a {{term(Structural Element)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DOOR_STATE">
				<xs:annotation>
					<xs:documentation>
            The operational state of a {{block(Door)}} component or composition
            element.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="EMERGENCY_STOP">
				<xs:annotation>
					<xs:documentation>
            The current state of the emergency stop signal for a piece of
            equipment, controller path, or any other component or subsystem of a
            piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="END_OF_BAR">
				<xs:annotation>
					<xs:documentation>
            An indication that the end of a piece of bar stock has been reached.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="EQUIPMENT_MODE">
				<xs:annotation>
					<xs:documentation>
            An indication that a piece of equipment, or a sub-part of a piece of
            equipment, is performing specific types of activities.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="EXECUTION">
				<xs:annotation>
					<xs:documentation>
            The execution status of the {{block(Component)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FUNCTIONAL_MODE">
				<xs:annotation>
					<xs:documentation>
            The current intended production status of the device or component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="HARDNESS">
				<xs:annotation>
					<xs:documentation>
            The measurement of the hardness of a material.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INTERFACE_STATE">
				<xs:annotation>
					<xs:documentation>
            An indication of the operation condition of an {{block(Interface)}}
            component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LINE">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED** in *Version 1.4.0*. The current line of code being
            executed.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LINE_LABEL">
				<xs:annotation>
					<xs:documentation>
            An optional identifier for a {{block(Block)}} of code in a
            {{block(Program)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LINE_NUMBER">
				<xs:annotation>
					<xs:documentation>
            A reference to the position of a block of program code within a
            control program.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MATERIAL">
				<xs:annotation>
					<xs:documentation>
            The identifier of a material used or consumed in the manufacturing
            process.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MATERIAL_CHANGE">
				<xs:annotation>
					<xs:documentation>
            Service to change the type of material or product being loaded or
            fed to a piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MATERIAL_FEED">
				<xs:annotation>
					<xs:documentation>
            Service to advance material or feed product to a piece of equipment
            from a continuous or bulk source.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MATERIAL_LAYER">
				<xs:annotation>
					<xs:documentation>
            Identifies the layers of material applied to a part or product as
            part of an additive manufacturing process.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MATERIAL_LOAD">
				<xs:annotation>
					<xs:documentation>
            Service to load a piece of material or product.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MATERIAL_RETRACT">
				<xs:annotation>
					<xs:documentation>
            Service to remove or retract material or product.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MATERIAL_UNLOAD">
				<xs:annotation>
					<xs:documentation>
            Service to unload a piece of material or product.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MESSAGE">
				<xs:annotation>
					<xs:documentation>
            Any text string of information to be transferred from a piece of
            equipment to a client software application.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OPEN_CHUCK">
				<xs:annotation>
					<xs:documentation>
            Service to open a chuck.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OPEN_DOOR">
				<xs:annotation>
					<xs:documentation>
            Service to open a door.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OPERATOR_ID">
				<xs:annotation>
					<xs:documentation>
            The identifier of the person currently responsible for operating the
            piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PALLET_ID">
				<xs:annotation>
					<xs:documentation>
            The identifier for a pallet.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_CHANGE">
				<xs:annotation>
					<xs:documentation>
            Service to change the part or product associated with a piece of
            equipment to a different part or product.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_COUNT">
				<xs:annotation>
					<xs:documentation>
            The aggregate count of parts.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_DETECT">
				<xs:annotation>
					<xs:documentation>
            An indication designating whether a part or work piece has been
            detected or is present.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_ID">
				<xs:annotation>
					<xs:documentation>
            An identifier of a part in a manufacturing operation.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_NUMBER">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED** in *Version 1.7*. `PART_NUMBER` is now a `subType` of
            `PART_KIND_ID`. An identifier of a part or product moving through
            the manufacturing process.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PATH_FEEDRATE_OVERRIDE">
				<xs:annotation>
					<xs:documentation>
            The value of a signal or calculation issued to adjust the feedrate
            for the axes associated with a {{block(Path)}} component that may
            represent a single axis or the coordinated movement of multiple
            axes.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PATH_MODE">
				<xs:annotation>
					<xs:documentation>
            Describes the operational relationship between a {{block(Path)}}
            {{term(Structural Element)}} and another {{block(Path)}}
            {{term(Structural Element)}} for pieces of equipment comprised of
            multiple logical groupings of controlled axes or other logical
            operations.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="POWER_STATE">
				<xs:annotation>
					<xs:documentation>
            The indication of the status of the source of energy for a
            {{term(Structural Element)}} to allow it to perform its intended
            function or the state of an enabling signal providing permission for
            the {{term(Structural Element)}} to perform its functions.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="POWER_STATUS">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED** in *Version 1.1.0*. The `ON` or `OFF` status of the
            component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROCESS_TIME">
				<xs:annotation>
					<xs:documentation>
            The time and date associated with an activity or event.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROGRAM">
				<xs:annotation>
					<xs:documentation>
            The name of the logic or motion program being executed by the
            {{block(Controller)}} component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROGRAM_COMMENT">
				<xs:annotation>
					<xs:documentation>
            A comment or non-executable statement in the control program.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROGRAM_EDIT">
				<xs:annotation>
					<xs:documentation>
            An indication of the status of the {{block(Controller)}} components
            program editing mode. A program may be edited while another is
            executed.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROGRAM_EDIT_NAME">
				<xs:annotation>
					<xs:documentation>
            The name of the program being edited. This is used in conjunction
            with {{block(ProgramEdit)}} when in `ACTIVE` state. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROGRAM_HEADER">
				<xs:annotation>
					<xs:documentation>
            The non-executable header section of the control program.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROGRAM_LOCATION">
				<xs:annotation>
					<xs:documentation>
            The Uniform Resource Identifier (URI) for the source file associated
            with {{block(Program)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROGRAM_LOCATION_TYPE">
				<xs:annotation>
					<xs:documentation>
            Defines whether the logic or motion program defined by
            {{block(Program)}} is being executed from the local memory of the
            controller or from an outside source.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROGRAM_NEST_LEVEL">
				<xs:annotation>
					<xs:documentation>
            An indication of the nesting level within a control program that is
            associated with the code or instructions that is currently being
            executed.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ROTARY_MODE">
				<xs:annotation>
					<xs:documentation>
            The current operating mode for a {{block(Rotary)}} type axis.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ROTARY_VELOCITY_OVERRIDE">
				<xs:annotation>
					<xs:documentation>
            The percentage change to the velocity of the programmed velocity for
            a {{block(Rotary)}} type axis.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SERIAL_NUMBER">
				<xs:annotation>
					<xs:documentation>
            The serial number associated with a {{block(Component)}},
            {{block(Asset)}}, or {{block(Device)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SPINDLE_INTERLOCK">
				<xs:annotation>
					<xs:documentation>
            An indication of the status of the spindle for a piece of equipment
            when power has been removed and it is free to rotate.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TOOL_ASSET_ID">
				<xs:annotation>
					<xs:documentation>
            The identifier of an individual tool asset.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TOOL_GROUP">
				<xs:annotation>
					<xs:documentation>
            An identifier for the tool group associated with a specific tool.
            Commonly used to designate spare tools.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TOOL_ID">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED** in *Version 1.2.0*. See `TOOL_ASSET_ID`. The
            identifier of the tool currently in use for a given `Path`.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TOOL_NUMBER">
				<xs:annotation>
					<xs:documentation>
            The identifier assigned by the {{block(Controller)}} component to a
            cutting tool when in use by a piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TOOL_OFFSET">
				<xs:annotation>
					<xs:documentation>
            A reference to the tool offset variables applied to the active
            cutting tool associated with a {{block(Path)}} in a
            {{block(Controller)}} type component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="USER">
				<xs:annotation>
					<xs:documentation>
            The identifier of the person currently responsible for operating the
            piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VARIABLE">
				<xs:annotation>
					<xs:documentation>
            A data value whose meaning may change over time due to changes in
            the opertion of a piece of equipment or the process being executed
            on that piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WAIT_STATE">
				<xs:annotation>
					<xs:documentation>
            An indication of the reason that {{block(Execution)}} is reporting a
            value of `WAIT`.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WIRE">
				<xs:annotation>
					<xs:documentation>
            A string like piece or filament of relatively rigid or flexible
            material provided in a variety of diameters.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WORKHOLDING_ID">
				<xs:annotation>
					<xs:documentation>
            The identifier for the current workholding or part clamp in use by a
            piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WORK_OFFSET">
				<xs:annotation>
					<xs:documentation>
            A reference to the offset variables for a work piece or part
            associated with a {{block(Path)}} in a {{block(Controller)}} type
            component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OPERATING_SYSTEM">
				<xs:annotation>
					<xs:documentation>
            The Operating System of a component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FIRMWARE">
				<xs:annotation>
					<xs:documentation>
            The embedded software of a component. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="APPLICATION">
				<xs:annotation>
					<xs:documentation>
            The application on a component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LIBRARY">
				<xs:annotation>
					<xs:documentation>
            The software library on a component
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="HARDWARE">
				<xs:annotation>
					<xs:documentation>
            An indication of a fault associated with the hardware subsystem of
            the {{term(Structural Element)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="NETWORK">
				<xs:annotation>
					<xs:documentation>
            Network details of a component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ROTATION">
				<xs:annotation>
					<xs:documentation>
            A three space angular rotation relative to a coordinate system.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TRANSLATION">
				<xs:annotation>
					<xs:documentation>
            A three space linear translation relative to a coordinate system.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEVICE_ADDED">
				<xs:annotation>
					<xs:documentation>
            An {{block(Event)}} that provides the {{term(UUID)}} of new device
            added to an {{term(MTConnect Agent)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEVICE_REMOVED">
				<xs:annotation>
					<xs:documentation>
            An {{block(Event)}} that provides the {{term(UUID)}} of a device
            removed from an {{term(MTConnect Agent)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEVICE_CHANGED">
				<xs:annotation>
					<xs:documentation>
            An {{block(Event)}} that provides the {{term(UUID)}} of the device
            whose {{term(Metadata)}} has changed.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CONNECTION_STATUS">
				<xs:annotation>
					<xs:documentation>
            The status of the connection between an {{term(Adapter)}} and an
            {{term(Agent)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ADAPTER_SOFTWARE_VERSION">
				<xs:annotation>
					<xs:documentation>
            The originator’s software version of the {{term(Adapter)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ADAPTER_URI">
				<xs:annotation>
					<xs:documentation>
            The {{term(URI)}} of the {{term(Adapter)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MTCONNECT_VERSION">
				<xs:annotation>
					<xs:documentation>
            The reference version of the MTConnect Standard supported by the
            {{term(Adapter)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SENSOR_ATTACHMENT">
				<xs:annotation>
					<xs:documentation>
            An {{block(Event)}} defining an {{term(Attachment)}} between a
            sensor and an entity.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_STATUS">
				<xs:annotation>
					<xs:documentation>
            State or condition of a part.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROCESS_OCCURRENCE_ID">
				<xs:annotation>
					<xs:documentation>
            An identifier of a process being executed by the device.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROCESS_AGGREGATE_ID">
				<xs:annotation>
					<xs:documentation>
            Identifier given to link the individual occurrence to a group of
            related occurrences, such as a process step in a process plan.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROCESS_KIND_ID">
				<xs:annotation>
					<xs:documentation>
            Identifier given to link the individual occurrence to a class of
            processes or process definition. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_GROUP_ID">
				<xs:annotation>
					<xs:documentation>
            Identifier given to a collection of individual parts. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_KIND_ID">
				<xs:annotation>
					<xs:documentation>
            Identifier given to link the individual occurrence to a class of
            parts, typically distinguished by a particular part design.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_UNIQUE_ID">
				<xs:annotation>
					<xs:documentation>
            Identifier given to a distinguishable, individual part. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CONTROL_LIMIT">
				<xs:annotation>
					<xs:documentation>
            A set of limits used to indicate whether a process variable is
            stable and in control.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SPECIFICATION_LIMIT">
				<xs:annotation>
					<xs:documentation>
            A set of limits defining a range of values designating acceptable
            performance for a variable.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ALARM_LIMIT">
				<xs:annotation>
					<xs:documentation>
            A set of limits used to trigger warning or alarm indicators.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LOAD_COUNT">
				<xs:annotation>
					<xs:documentation>
            Accumulation of the number of times an operation has attempted to,
            or is planned to attempt to, load materials, parts, or other items.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="UNLOAD_COUNT">
				<xs:annotation>
					<xs:documentation>
            Accumulation of the number of times an operation has attempted to,
            or is planned to attempt to, unload materials, parts, or other
            items.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TRANSFER_COUNT">
				<xs:annotation>
					<xs:documentation>
            Accumulation of the number of times an operation has attempted to,
            or is planned to attempt to, transfer materials, parts, or other
            items from one location to another.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ACTIVATION_COUNT">
				<xs:annotation>
					<xs:documentation>
            Accumulation of the number of times a function has attempted to, or
            is planned to attempt to, activate or be performed.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEACTIVATION_COUNT">
				<xs:annotation>
					<xs:documentation>
            Accumulation of the number of times a function has attempted to, or
            is planned to attempt to, deactivate or cease.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CYCLE_COUNT">
				<xs:annotation>
					<xs:documentation>
            Accumulation of the number of times a cyclic function has attempted
            to, or is planned to attempt to execute.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VALVE_STATE">
				<xs:annotation>
					<xs:documentation>
            The state of a valve is one of open, closed, or transitioning
            between the states.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LOCK_STATE">
				<xs:annotation>
					<xs:documentation>
            The state or operating mode of a {{block(Lock)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROCESS_STATE">
				<xs:annotation>
					<xs:documentation>
            The particular condition of the process occurrence at a specific
            time.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_PROCESSING_STATE">
				<xs:annotation>
					<xs:documentation>
            The particular condition of the part occurrence at a specific time.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="COMMUNICATIONS">
				<xs:annotation>
					<xs:documentation>
            An indication that the piece of equipment has experienced a
            communications failure.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DATA_RANGE">
				<xs:annotation>
					<xs:documentation>
            An indication that the value of the data associated with a measured
            value or a calculation is outside of an expected range.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LOGIC_PROGRAM">
				<xs:annotation>
					<xs:documentation>
            An indication that an error occurred in the logic program or
            programmable logic controller (PLC) associated with a piece of
            equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MOTION_PROGRAM">
				<xs:annotation>
					<xs:documentation>
            An indication that an error occurred in the motion program
            associated with a piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SYSTEM">
				<xs:annotation>
					<xs:documentation>
            A general purpose indication associated with an electronic component
            of a piece of equipment or a controller that represents a fault that
            is not associated with the operator, program, or hardware.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ACTUATOR">
				<xs:annotation>
					<xs:documentation>
            An indication of a fault associated with an actuator.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VARIABLE">
				<xs:annotation>
					<xs:documentation>
            A user variable
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="DataItemEnumType">
		<xs:annotation>
			<xs:documentation>
        The types of measurements available
      </xs:documentation>
		</xs:annotation>
		<xs:union memberTypes="DataItemEnumEnum DataItemEnumExtType"/>
	</xs:simpleType>
	<xs:simpleType name="DataItemSubEnumExtType">
		<xs:annotation>
			<xs:documentation>
        Extended tyoe for The sub-types for a measurement
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:pattern value="[a-ln-z][a-z]*:[A-Z_0-9]+"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="DataItemSubEnumEnum">
		<xs:annotation>
			<xs:documentation>
        The sub-types for a measurement
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:enumeration value="ABSOLUTE">
				<xs:annotation>
					<xs:documentation>
            Relating to or derived in the simplest manner from the fundamental
            units or measurements.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ACTION">
				<xs:annotation>
					<xs:documentation>
            An indication of the operating state of a mechanism.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ACTUAL">
				<xs:annotation>
					<xs:documentation>
            The measured or reported value of an {{term(observation)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ALL">
				<xs:annotation>
					<xs:documentation>
            The number of parts produced.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ALTERNATING">
				<xs:annotation>
					<xs:documentation>
            The measurement of alternating voltage or current. If not specified
            further in statistic, defaults to RMS voltage. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="A_SCALE">
				<xs:annotation>
					<xs:documentation>
            A Scale weighting factor.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="AUXILIARY">
				<xs:annotation>
					<xs:documentation>
            When multiple locations on a piece of bar stock being feed by a bar
            feeder are referenced as the indication of whether the end of that
            piece of bar stock has been reached.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="BAD">
				<xs:annotation>
					<xs:documentation>
            The number of parts produced that do not conform to specification.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="BRINELL">
				<xs:annotation>
					<xs:documentation>
            A scale to measure the resistance to deformation of a surface.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="B_SCALE">
				<xs:annotation>
					<xs:documentation>
            B Scale weighting factor.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="COMMANDED">
				<xs:annotation>
					<xs:documentation>
            Directive value including adjustments such as an offset or
            overrides.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CONSUMED">
				<xs:annotation>
					<xs:documentation>
            The amount of material consumed from an object or container during a
            manufacturing process.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CONTROL">
				<xs:annotation>
					<xs:documentation>
            The state of the enabling signal or control logic that enables or
            disables the function or operation of the structural element.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="C_SCALE">
				<xs:annotation>
					<xs:documentation>
            C Scale weighting factor.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DELAY">
				<xs:annotation>
					<xs:documentation>
            The elapsed time of a temporary halt of action.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DIRECT">
				<xs:annotation>
					<xs:documentation>
            The measurement of DC current or voltage.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DRY_RUN">
				<xs:annotation>
					<xs:documentation>
            A setting or operator selection used to execute a test mode to
            confirm the execution of machine functions.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="D_SCALE">
				<xs:annotation>
					<xs:documentation>
            D Scale weighting factor.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="EXPIRATION">
				<xs:annotation>
					<xs:documentation>
            The time and date code relating to the expiration or end of useful
            life for a material or other physical item.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FIRST_USE">
				<xs:annotation>
					<xs:documentation>
            The time and date code relating the first use of a material or other
            physical item.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="GOOD">
				<xs:annotation>
					<xs:documentation>
            The number of parts produced that conform to specification.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INCREMENTAL">
				<xs:annotation>
					<xs:documentation>
            Relating to or derived from the last {{term(observation)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="JOG">
				<xs:annotation>
					<xs:documentation>
            The feedrate specified by a logic or motion program when operating
            in a manual state or method (jogging).
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LATERAL">
				<xs:annotation>
					<xs:documentation>
            An indication of the position of a mechanism that may move in a
            lateral direction.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LEEB">
				<xs:annotation>
					<xs:documentation>
            A scale to measure the elasticity of a surface.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LENGTH">
				<xs:annotation>
					<xs:documentation>
            A reference to a length type tool offset variable.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LINE">
				<xs:annotation>
					<xs:documentation>
            The state of the power source.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LINEAR">
				<xs:annotation>
					<xs:documentation>
            The direction of motion of a linear motion.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LOADED">
				<xs:annotation>
					<xs:documentation>
            Subparts of a piece of equipment are under load.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MACHINE_AXIS_LOCK">
				<xs:annotation>
					<xs:documentation>
            A setting or operator selection that changes the behavior of the
            controller on a piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MAIN">
				<xs:annotation>
					<xs:documentation>
            Relating to the primary logic or motion program currently being
            executed.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MAINTENANCE">
				<xs:annotation>
					<xs:documentation>
            Relating to maintenance on the piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MANUAL_UNCLAMP">
				<xs:annotation>
					<xs:documentation>
            An indication of the state of an operator controlled interlock that
            can inhibit the ability to initiate an unclamp action of an
            electronically controlled chuck.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MANUFACTURE">
				<xs:annotation>
					<xs:documentation>
            Related to the production of a material or other physical item.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MAXIMUM">
				<xs:annotation>
					<xs:documentation>
            The maximum value.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MINIMUM">
				<xs:annotation>
					<xs:documentation>
            The minimum value.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MOHS">
				<xs:annotation>
					<xs:documentation>
            A scale to measure the resistance to scratching of a surface.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MOTION">
				<xs:annotation>
					<xs:documentation>
            An indication of the open or closed state of a mechanism.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="NO_SCALE">
				<xs:annotation>
					<xs:documentation>
            No weighting factor on the frequency scale.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OPERATING">
				<xs:annotation>
					<xs:documentation>
            A piece of equipment that is powered or performing any activity.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OPERATOR">
				<xs:annotation>
					<xs:documentation>
            Relating to the person currently responsible for operating the piece
            of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OPTIONAL_STOP">
				<xs:annotation>
					<xs:documentation>
            A setting or operator selection that changes the behavior of the
            controller on a piece of equipment. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OVERRIDE">
				<xs:annotation>
					<xs:documentation>
            The overridden value.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="POWERED">
				<xs:annotation>
					<xs:documentation>
            A piece of equipment is powered and functioning or
            {{termplural(Component)}} that are required to remain on are
            powered.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PRIMARY">
				<xs:annotation>
					<xs:documentation>
            The main or most important location **MUST** be designated as the
            end of a piece of bar stock.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROBE">
				<xs:annotation>
					<xs:documentation>
            The position provided by a measurement probe. **DEPRECATION
            WARNING**: May be deprecated in the future.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROCESS">
				<xs:annotation>
					<xs:documentation>
            Relating to production of a part or product on a piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROGRAMMED">
				<xs:annotation>
					<xs:documentation>
            Directive value without offsets and adjustments.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="RADIAL">
				<xs:annotation>
					<xs:documentation>
            A reference to a radial type tool offset variable.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="RAPID">
				<xs:annotation>
					<xs:documentation>
            Performing an operation faster or in less time than nominal rate.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="REMAINING">
				<xs:annotation>
					<xs:documentation>
            The remaining measure of an object or an action.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ROCKWELL">
				<xs:annotation>
					<xs:documentation>
            A scale to measure the resistance to deformation of a surface.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ROTARY">
				<xs:annotation>
					<xs:documentation>
            The direction of a rotary motion using the right hand rule
            convention.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SCHEDULE">
				<xs:annotation>
					<xs:documentation>
            The identity of a control program that is used to specify the order
            of execution of other programs.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SET_UP">
				<xs:annotation>
					<xs:documentation>
            Relating to the preparation of a piece of equipment for production
            or restoring the piece of equipment to a neutral state after
            production.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SHORE">
				<xs:annotation>
					<xs:documentation>
            A scale to measure the resistance to deformation of a surface.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SINGLE_BLOCK">
				<xs:annotation>
					<xs:documentation>
            A setting or operator selection that changes the behavior of the
            controller on a piece of equipment. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="STANDARD">
				<xs:annotation>
					<xs:documentation>
            The standard measure of an object or an action.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="START">
				<xs:annotation>
					<xs:documentation>
            Boundary when an activity or an event commences.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SWITCHED">
				<xs:annotation>
					<xs:documentation>
            An indication of the activation state of a mechanism represented by
            a {{term(Composition)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TARGET">
				<xs:annotation>
					<xs:documentation>
            The goal of the operation or process.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TARGET_COMPLETION">
				<xs:annotation>
					<xs:documentation>
            Relating to the end or completion of an activity or event.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TOOL_CHANGE_STOP">
				<xs:annotation>
					<xs:documentation>
            A setting or operator selection that changes the behavior of the
            controller on a piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="USEABLE">
				<xs:annotation>
					<xs:documentation>
            The remaining usable measure of an object or action.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VERTICAL">
				<xs:annotation>
					<xs:documentation>
            An indication of the position of a mechanism that may move in a
            vertical direction.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VICKERS">
				<xs:annotation>
					<xs:documentation>
            A scale to measure the resistance to deformation of a surface.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WORKING">
				<xs:annotation>
					<xs:documentation>
            A piece of equipment performing any activity, the equipment is
            active and performing a function under load or not.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="IPV4_ADDRESS">
				<xs:annotation>
					<xs:documentation>
            The IPV4 network address of the component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="IPV6_ADDRESS">
				<xs:annotation>
					<xs:documentation>
            The IPV6 network address of the component.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="GATEWAY">
				<xs:annotation>
					<xs:documentation>
            The Gateway for the component network.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SUBNET_MASK">
				<xs:annotation>
					<xs:documentation>
            The SubNet mask for the component network. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VLAN_ID">
				<xs:annotation>
					<xs:documentation>
            The layer2 Virtual Local Network (VLAN) ID for the component
            network.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MAC_ADDRESS">
				<xs:annotation>
					<xs:documentation>
            Media Access Control Address. The unique physical address of the
            network hardware.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WIRELESS">
				<xs:annotation>
					<xs:documentation>
            Identifies whether the connection type is wireless.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LICENSE">
				<xs:annotation>
					<xs:documentation>
            The license code to validate or activate the hardware or software.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VERSION">
				<xs:annotation>
					<xs:documentation>
            The version of the hardware or software. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="RELEASE_DATE">
				<xs:annotation>
					<xs:documentation>
            The date the hardware or software was released for general use.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INSTALL_DATE">
				<xs:annotation>
					<xs:documentation>
            The date the hardware or software was installed.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MANUFACTURER">
				<xs:annotation>
					<xs:documentation>
            The corporate identity for the maker of the hardware or software.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="UUID">
				<xs:annotation>
					<xs:documentation>
            The globally unique identifier as specified in ISO 11578 or RFC
            4122.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SERIAL_NUMBER">
				<xs:annotation>
					<xs:documentation>
            A serial number that uniquely identifies a specific part.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="RAW_MATERIAL">
				<xs:annotation>
					<xs:documentation>
            Material that is used to produce parts.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LOT">
				<xs:annotation>
					<xs:documentation>
            A group of parts tracked as a lot.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="BATCH">
				<xs:annotation>
					<xs:documentation>
            A group of parts produced in a batch.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="HEAT_TREAT">
				<xs:annotation>
					<xs:documentation>
            A material heat number.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_NUMBER">
				<xs:annotation>
					<xs:documentation>
            A particular part design or model.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_FAMILY">
				<xs:annotation>
					<xs:documentation>
            A group of parts having similarities in geometry, manufacturing
            process, and/or functions.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART_NAME">
				<xs:annotation>
					<xs:documentation>
            A word or set of words by which a part is known, addressed, or
            referred to.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROCESS_STEP">
				<xs:annotation>
					<xs:documentation>
            A step in the process plan that this occurrence corresponds to. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROCESS_PLAN">
				<xs:annotation>
					<xs:documentation>
            A process plan that a process occurrence belongs to.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ORDER_NUMBER">
				<xs:annotation>
					<xs:documentation>
            The authorization of a process occurrence.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PROCESS_NAME">
				<xs:annotation>
					<xs:documentation>
            A word or set of words by which a process being executed (process
            occurrence) by the device is known, addressed, or referred to. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ISO_STEP_EXECUTABLE">
				<xs:annotation>
					<xs:documentation>
            A reference to a ISO 10303 Executable.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="COMPLETE">
				<xs:annotation>
					<xs:documentation>
            Associated with the completion of an activity or event.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ACTIVE">
				<xs:annotation>
					<xs:documentation>
            Relating to logic or motion program currently executing.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FAILED">
				<xs:annotation>
					<xs:documentation>
            Actions or activities that were attempted , but failed to complete
            or resulted in an unexpected or unacceptable outcome.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ABORTED">
				<xs:annotation>
					<xs:documentation>
            Actions or activities that were attempted, but terminated before
            they could be completed. 
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ENDED">
				<xs:annotation>
					<xs:documentation>
            Boundary when an activity or an event terminates.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WASTE">
				<xs:annotation>
					<xs:documentation>
            Reported or measured value of the amount discarded.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PART">
				<xs:annotation>
					<xs:documentation>
            Reported or measured value of amount included in the {{term(part)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="DataItemSubEnumType">
		<xs:annotation>
			<xs:documentation>
        The sub-types for a measurement
      </xs:documentation>
		</xs:annotation>
		<xs:union memberTypes="DataItemSubEnumEnum DataItemSubEnumExtType"/>
	</xs:simpleType>
	<xs:simpleType name="DataItemStatisticsExtType">
		<xs:annotation>
			<xs:documentation>
        Extended tyoe for Statistical operations on data
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:pattern value="[a-ln-z][a-z]*:[A-Z_0-9]+"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="DataItemStatisticsEnum">
		<xs:annotation>
			<xs:documentation>
        Statistical operations on data
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:enumeration value="AVERAGE">
				<xs:annotation>
					<xs:documentation>
            Mathematical Average value calculated for the data item during the
            calculation period.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="KURTOSIS">
				<xs:annotation>
					<xs:documentation>
            **DEPRECATED** in *Version 1.6*. ~~A measure of the
            &quot;peakedness&quot; of a probability distribution; i.e., the
            shape of the distribution curve.~~
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MAXIMUM">
				<xs:annotation>
					<xs:documentation>
            Maximum or peak value recorded for the data item during the
            calculation period.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MEDIAN">
				<xs:annotation>
					<xs:documentation>
            The middle number of a series of numbers.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MINIMUM">
				<xs:annotation>
					<xs:documentation>
            Minimum value recorded for the data item during the calculation
            period.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MODE">
				<xs:annotation>
					<xs:documentation>
            The number in a series of numbers that occurs most often.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="RANGE">
				<xs:annotation>
					<xs:documentation>
            Difference between the maximum and minimum value of a data item
            during the calculation period. Also represents Peak-to-Peak
            measurement in a waveform.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ROOT_MEAN_SQUARE">
				<xs:annotation>
					<xs:documentation>
            Mathematical Root Mean Square (RMS) value calculated for the data
            item during the calculation period.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="STANDARD_DEVIATION">
				<xs:annotation>
					<xs:documentation>
            Statistical Standard Deviation value calculated for the data item
            during the calculation period.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="DataItemStatisticsType">
		<xs:annotation>
			<xs:documentation>
        Statistical operations on data
      </xs:documentation>
		</xs:annotation>
		<xs:union memberTypes="DataItemStatisticsEnum DataItemStatisticsExtType"/>
	</xs:simpleType>
	<xs:simpleType name="UnitsExtType">
		<xs:annotation>
			<xs:documentation>
        Extended tyoe for The units supported
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:pattern value="[a-ln-z][a-z]*:[A-Z_0-9]+"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="UnitsEnum">
		<xs:annotation>
			<xs:documentation>
        The units supported
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:enumeration value="AMPERE">
				<xs:annotation>
					<xs:documentation>
            Amps
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CELSIUS">
				<xs:annotation>
					<xs:documentation>
            Degrees Celsius
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="COUNT">
				<xs:annotation>
					<xs:documentation>
            A count of something.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DECIBEL">
				<xs:annotation>
					<xs:documentation>
            Sound Level
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEGREE">
				<xs:annotation>
					<xs:documentation>
            Angle in degrees
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEGREE_3D">
				<xs:annotation>
					<xs:documentation>
            A space-delimited, floating-point representation of the angular
            rotation in degrees around the X, Y, and Z axes relative to a
            cartesian coordinate system respectively in order as A, B, and C. If
            any of the rotations is not known, it **MUST** be zero (0).
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEGREE/SECOND">
				<xs:annotation>
					<xs:documentation>
            Angular degrees per second
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEGREE/SECOND^2">
				<xs:annotation>
					<xs:documentation>
            Angular acceleration in degrees per second squared
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="HERTZ">
				<xs:annotation>
					<xs:documentation>
            Frequency measured in cycles per second
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="JOULE">
				<xs:annotation>
					<xs:documentation>
            A measurement of energy.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="KILOGRAM">
				<xs:annotation>
					<xs:documentation>
            Kilograms
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LITER">
				<xs:annotation>
					<xs:documentation>
            Measurement of volume of a fluid
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LITER/SECOND">
				<xs:annotation>
					<xs:documentation>
            Liters per second
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MICRO_RADIAN">
				<xs:annotation>
					<xs:documentation>
            Measurement of Tilt
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER">
				<xs:annotation>
					<xs:documentation>
            Millimeters
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER_3D">
				<xs:annotation>
					<xs:documentation>
            A point in space identified by X, Y, and Z positions and represented
            by a space-delimited set of numbers each expressed in millimeters.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER/REVOLUTION">
				<xs:annotation>
					<xs:documentation>
            Millimeters per revolution.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER/SECOND">
				<xs:annotation>
					<xs:documentation>
            Millimeters per second
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER/SECOND^2">
				<xs:annotation>
					<xs:documentation>
            Acceleration in millimeters per second squared
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="NEWTON">
				<xs:annotation>
					<xs:documentation>
            Force in Newtons
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="NEWTON_METER">
				<xs:annotation>
					<xs:documentation>
            Torque, a unit for force times distance.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OHM">
				<xs:annotation>
					<xs:documentation>
            Measure of Electrical Resistance
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PASCAL">
				<xs:annotation>
					<xs:documentation>
            Pressure in Newtons per square meter
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PASCAL_SECOND">
				<xs:annotation>
					<xs:documentation>
            Measurement of Viscosity
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PERCENT">
				<xs:annotation>
					<xs:documentation>
            Percentage
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PH">
				<xs:annotation>
					<xs:documentation>
            A measure of the acidity or alkalinity of a solution.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="REVOLUTION/MINUTE">
				<xs:annotation>
					<xs:documentation>
            Revolutions per minute
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SECOND">
				<xs:annotation>
					<xs:documentation>
            A measurement of time.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SIEMENS/METER">
				<xs:annotation>
					<xs:documentation>
            A measurement of Electrical Conductivity
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLT">
				<xs:annotation>
					<xs:documentation>
            Volts
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLT_AMPERE">
				<xs:annotation>
					<xs:documentation>
            The measurement of the apparent power in an electrical circuit,
            equal to the product of root-mean-square (RMS) voltage and RMS
            current (commonly referred to as VA).
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLT_AMPERE_REACTIVE">
				<xs:annotation>
					<xs:documentation>
            The measurement of reactive power in an AC electrical circuit
            (commonly referred to as VAR).
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WATT">
				<xs:annotation>
					<xs:documentation>
            Watts
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WATT_SECOND">
				<xs:annotation>
					<xs:documentation>
            Measurement of electrical energy, equal to one Joule
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="REVOLUTION/SECOND">
				<xs:annotation>
					<xs:documentation>
            Revolutions per second.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="REVOLUTION/SECOND^2">
				<xs:annotation>
					<xs:documentation>
            Revolutions per second squared.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="GRAM/CUBIC_METER">
				<xs:annotation>
					<xs:documentation>
            Gram per cubic meter.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CUBIC_MILLIMETER">
				<xs:annotation>
					<xs:documentation>
            Geometric volume in millimeters.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CUBIC_MILLIMETER/SECOND">
				<xs:annotation>
					<xs:documentation>
            Change of geometric volume per second.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CUBIC_MILLIMETER/SECOND^2">
				<xs:annotation>
					<xs:documentation>
            Change in geometric volume per second squared.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIGRAM">
				<xs:annotation>
					<xs:documentation>
            Milligram.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIGRAM/CUBIC_MILLIMETER">
				<xs:annotation>
					<xs:documentation>
            Milligram per cubic millimeter.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLILITER">
				<xs:annotation>
					<xs:documentation>
            Milliliter.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="COUNT/SECOND">
				<xs:annotation>
					<xs:documentation>
            Counts per second.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PASCAL/SECOND">
				<xs:annotation>
					<xs:documentation>
            Pascal per second.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="UNIT_VECTOR_3D">
				<xs:annotation>
					<xs:documentation>
            A 3D Unit Vector. Space delimited list of three floating point
            numbers.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="UnitsType">
		<xs:annotation>
			<xs:documentation>
        The units supported
      </xs:documentation>
		</xs:annotation>
		<xs:union memberTypes="UnitsEnum UnitsExtType"/>
	</xs:simpleType>
	<xs:simpleType name="NativeUnitsExtType">
		<xs:annotation>
			<xs:documentation>
        Extended tyoe for The units supported for the source equipment that can
        be converted into MTC Units.
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:pattern value="[a-ln-z][a-z]*:[A-Z_0-9]+"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="NativeUnitsEnum">
		<xs:annotation>
			<xs:documentation>
        The units supported for the source equipment that can be converted into
        MTC Units.
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:enumeration value="AMPERE">
				<xs:annotation>
					<xs:documentation>
            Amps
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CELSIUS">
				<xs:annotation>
					<xs:documentation>
            Degrees Celsius
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="COUNT">
				<xs:annotation>
					<xs:documentation>
            A count of something.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DECIBEL">
				<xs:annotation>
					<xs:documentation>
            Sound Level
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEGREE">
				<xs:annotation>
					<xs:documentation>
            Angle in degrees
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEGREE_3D">
				<xs:annotation>
					<xs:documentation>
            A space-delimited, floating-point representation of the angular
            rotation in degrees around the X, Y, and Z axes relative to a
            cartesian coordinate system respectively in order as A, B, and C. If
            any of the rotations is not known, it **MUST** be zero (0).
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEGREE/SECOND">
				<xs:annotation>
					<xs:documentation>
            Angular degrees per second
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEGREE/SECOND^2">
				<xs:annotation>
					<xs:documentation>
            Angular acceleration in degrees per second squared
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="HERTZ">
				<xs:annotation>
					<xs:documentation>
            Frequency measured in cycles per second
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="JOULE">
				<xs:annotation>
					<xs:documentation>
            A measurement of energy.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="KILOGRAM">
				<xs:annotation>
					<xs:documentation>
            Kilograms
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LITER">
				<xs:annotation>
					<xs:documentation>
            Measurement of volume of a fluid
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LITER/SECOND">
				<xs:annotation>
					<xs:documentation>
            Liters per second
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MICRO_RADIAN">
				<xs:annotation>
					<xs:documentation>
            Measurement of Tilt
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER">
				<xs:annotation>
					<xs:documentation>
            Millimeters
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER_3D">
				<xs:annotation>
					<xs:documentation>
            A point in space identified by X, Y, and Z positions and represented
            by a space-delimited set of numbers each expressed in millimeters.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER/REVOLUTION">
				<xs:annotation>
					<xs:documentation>
            Millimeters per revolution.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER/SECOND">
				<xs:annotation>
					<xs:documentation>
            Millimeters per second
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER/SECOND^2">
				<xs:annotation>
					<xs:documentation>
            Acceleration in millimeters per second squared
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="NEWTON">
				<xs:annotation>
					<xs:documentation>
            Force in Newtons
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="NEWTON_METER">
				<xs:annotation>
					<xs:documentation>
            Torque, a unit for force times distance.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OHM">
				<xs:annotation>
					<xs:documentation>
            Measure of Electrical Resistance
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PASCAL">
				<xs:annotation>
					<xs:documentation>
            Pressure in Newtons per square meter
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PASCAL_SECOND">
				<xs:annotation>
					<xs:documentation>
            Measurement of Viscosity
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PERCENT">
				<xs:annotation>
					<xs:documentation>
            Percentage
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PH">
				<xs:annotation>
					<xs:documentation>
            A measure of the acidity or alkalinity of a solution.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="REVOLUTION/MINUTE">
				<xs:annotation>
					<xs:documentation>
            Revolutions per minute
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SECOND">
				<xs:annotation>
					<xs:documentation>
            A measurement of time.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SIEMENS/METER">
				<xs:annotation>
					<xs:documentation>
            A measurement of Electrical Conductivity
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLT">
				<xs:annotation>
					<xs:documentation>
            Volts
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLT_AMPERE">
				<xs:annotation>
					<xs:documentation>
            The measurement of the apparent power in an electrical circuit,
            equal to the product of root-mean-square (RMS) voltage and RMS
            current (commonly referred to as VA).
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="VOLT_AMPERE_REACTIVE">
				<xs:annotation>
					<xs:documentation>
            The measurement of reactive power in an AC electrical circuit
            (commonly referred to as VAR).
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WATT">
				<xs:annotation>
					<xs:documentation>
            Watts
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WATT_SECOND">
				<xs:annotation>
					<xs:documentation>
            Measurement of electrical energy, equal to one Joule
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="REVOLUTION/SECOND">
				<xs:annotation>
					<xs:documentation>
            Revolutions per second.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="REVOLUTION/SECOND^2">
				<xs:annotation>
					<xs:documentation>
            Revolutions per second squared.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="GRAM/CUBIC_METER">
				<xs:annotation>
					<xs:documentation>
            Gram per cubic meter.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CUBIC_MILLIMETER">
				<xs:annotation>
					<xs:documentation>
            Geometric volume in millimeters.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CUBIC_MILLIMETER/SECOND">
				<xs:annotation>
					<xs:documentation>
            Change of geometric volume per second.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CUBIC_MILLIMETER/SECOND^2">
				<xs:annotation>
					<xs:documentation>
            Change in geometric volume per second squared.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIGRAM">
				<xs:annotation>
					<xs:documentation>
            Milligram.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIGRAM/CUBIC_MILLIMETER">
				<xs:annotation>
					<xs:documentation>
            Milligram per cubic millimeter.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLILITER">
				<xs:annotation>
					<xs:documentation>
            Milliliter.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="COUNT/SECOND">
				<xs:annotation>
					<xs:documentation>
            Counts per second.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PASCAL/SECOND">
				<xs:annotation>
					<xs:documentation>
            Pascal per second.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="UNIT_VECTOR_3D">
				<xs:annotation>
					<xs:documentation>
            A 3D Unit Vector. Space delimited list of three floating point
            numbers.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="CENTIPOISE">
				<xs:annotation>
					<xs:documentation>
            A measure of viscosity.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DEGREE/MINUTE">
				<xs:annotation>
					<xs:documentation>
            Rotational velocity in degrees per minute.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FAHRENHEIT">
				<xs:annotation>
					<xs:documentation>
            Temperature in Fahrenheit.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FOOT">
				<xs:annotation>
					<xs:documentation>
            Feet.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FOOT/MINUTE">
				<xs:annotation>
					<xs:documentation>
            Feet per minute.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FOOT/SECOND">
				<xs:annotation>
					<xs:documentation>
            Feet per second.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FOOT/SECOND^2">
				<xs:annotation>
					<xs:documentation>
            Acceleration in feet per second squared.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="FOOT_3D">
				<xs:annotation>
					<xs:documentation>
            A point in space identified by X, Y, and Z positions and represented
            by a space-delimited set of numbers each expressed in feet.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="GALLON/MINUTE">
				<xs:annotation>
					<xs:documentation>
            Gallons per minute.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="HOUR">
				<xs:annotation>
					<xs:documentation>
            A measurement of time in hours.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INCH">
				<xs:annotation>
					<xs:documentation>
            Inches.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INCH/MINUTE">
				<xs:annotation>
					<xs:documentation>
            Inches per minute.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INCH/SECOND">
				<xs:annotation>
					<xs:documentation>
            Inches per second.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INCH/SECOND^2">
				<xs:annotation>
					<xs:documentation>
            Acceleration in inches per second squared.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INCH_POUND">
				<xs:annotation>
					<xs:documentation>
            A measure of torque in inch pounds.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INCH_3D">
				<xs:annotation>
					<xs:documentation>
            A point in space identified by X, Y, and Z positions and represented
            by a space-delimited set of numbers each expressed in inches.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="KELVIN">
				<xs:annotation>
					<xs:documentation>
            A measurement of temperature.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="KILOWATT">
				<xs:annotation>
					<xs:documentation>
            A measurement in kilowatt.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="KILOWATT_HOUR">
				<xs:annotation>
					<xs:documentation>
            Kilowatt hours which is 3.6 mega joules.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LITER">
				<xs:annotation>
					<xs:documentation>
            Measurement of volume of a fluid.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LITER/MINUTE">
				<xs:annotation>
					<xs:documentation>
            Measurement of rate of flow of a fluid.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER/MINUTE">
				<xs:annotation>
					<xs:documentation>
            Velocity in millimeters per minute.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MINUTE">
				<xs:annotation>
					<xs:documentation>
            A measurement of time in minutes.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OTHER">
				<xs:annotation>
					<xs:documentation>
            Unsupported units.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="POUND">
				<xs:annotation>
					<xs:documentation>
            US pounds.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="POUND/INCH^2">
				<xs:annotation>
					<xs:documentation>
            Pressure in pounds per square inch (PSI).
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="RADIAN">
				<xs:annotation>
					<xs:documentation>
            Angle in radians.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="RADIAN/MINUTE">
				<xs:annotation>
					<xs:documentation>
            Velocity in radians per minute.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="RADIAN/SECOND">
				<xs:annotation>
					<xs:documentation>
            Rotational acceleration in radian per second squared.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="RADIAN/SECOND^2">
				<xs:annotation>
					<xs:documentation>
            Rotational acceleration in radian per second squared.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="REVOLUTION/SECOND">
				<xs:annotation>
					<xs:documentation>
            Rotational velocity in revolution per second.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="BAR">
				<xs:annotation>
					<xs:documentation>
            Pressure in Bar.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TORR">
				<xs:annotation>
					<xs:documentation>
            Pressure in Torr.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MILLIMETER_MERCURY">
				<xs:annotation>
					<xs:documentation>
            Pressure in Millimeter of Mercury (mmHg).
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="PASCAL/MINUTE">
				<xs:annotation>
					<xs:documentation>
            Pascal per minute.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="NativeUnitsType">
		<xs:annotation>
			<xs:documentation>
        The units supported for the source equipment that can be converted into
        MTC Units.
      </xs:documentation>
		</xs:annotation>
		<xs:union memberTypes="NativeUnitsEnum NativeUnitsExtType"/>
	</xs:simpleType>
	<xs:simpleType name="CoordinateSystemEnumType">
		<xs:annotation>
			<xs:documentation>
        The coordinate system to be used for the position
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:enumeration value="MACHINE">
				<xs:annotation>
					<xs:documentation>
            An unchangeable coordinate system that has machine zero as its
            origin.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WORK">
				<xs:annotation>
					<xs:documentation>
            The coordinate system that represents the working area for a
            particular workpiece whose origin is shifted within the `MACHINE`
            coordinate system. If the `WORK` coordinates are not currently
            defined in the piece of equipment, the `MACHINE` coordinates will be
            used.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="DataItemResetValueExtType">
		<xs:annotation>
			<xs:documentation>
        Extended tyoe for The reset intervals
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:pattern value="[a-ln-z][a-z]*:[A-Z_0-9]+"/>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="DataItemResetValueEnum">
		<xs:annotation>
			<xs:documentation>
        The reset intervals
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:enumeration value="ACTION_COMPLETE">
				<xs:annotation>
					<xs:documentation>
            The value of the {{term(Data Item)}} that is measuring an action or
            operation is to be reset upon completion of that action or
            operation.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ANNUAL">
				<xs:annotation>
					<xs:documentation>
            The value of the {{term(Data Item)}} is to be reset at the end of a
            12-month period.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="DAY">
				<xs:annotation>
					<xs:documentation>
            The value of the {{term(Data Item)}} is to be reset at the end of a
            24-hour period.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="LIFE">
				<xs:annotation>
					<xs:documentation>
            The value of the {{term(Data Item)}} is not reset and accumulates
            for the entire life of the piece of equipment.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MAINTENANCE">
				<xs:annotation>
					<xs:documentation>
            The value of the {{term(Data Item)}} is to be reset upon completion
            of a maintenance event.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="MONTH">
				<xs:annotation>
					<xs:documentation>
            The value of the {{term(Data Item)}} is to be reset at the end of a
            monthly period.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="POWER_ON">
				<xs:annotation>
					<xs:documentation>
            The value of the {{term(Data Item)}} is to be reset when power was
            applied to the piece of equipment after a planned or unplanned
            interruption of power has occurred.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="SHIFT">
				<xs:annotation>
					<xs:documentation>
            The value of the {{term(Data Item)}} is to be reset at the end of a
            work shift.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="WEEK">
				<xs:annotation>
					<xs:documentation>
            The value of the {{term(Data Item)}} is to be reset at the end of a
            7-day period.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
		</xs:restriction>
	</xs:simpleType>
	<xs:simpleType name="DataItemResetValueType">
		<xs:annotation>
			<xs:documentation>
        The reset intervals
      </xs:documentation>
		</xs:annotation>
		<xs:union memberTypes="DataItemResetValueEnum DataItemResetValueExtType"/>
	</xs:simpleType>
	<xs:attributeGroup name="HeaderAttributesType">
		<xs:attribute name="version" type="VersionType" use="required">
			<xs:annotation>
				<xs:documentation>
          unique identifier of the administered item. {{cite(ISO/IEC
          11179-:2015)}}
        </xs:documentation>
			</xs:annotation>
		</xs:attribute>
		<xs:attribute name="creationTime" type="CreationTimeType" use="required">
			<xs:annotation>
				<xs:documentation>
          The time the file was created.
        </xs:documentation>
			</xs:annotation>
		</xs:attribute>
		<xs:attribute name="testIndicator" type="TestIndicatorType" use="optional">
			<xs:annotation>
				<xs:documentation>
          Indicates that this was a test document
        </xs:documentation>
			</xs:annotation>
		</xs:attribute>
		<xs:attribute name="instanceId" type="InstanceIdType" use="required">
			<xs:annotation>
				<xs:documentation>
          The unique instance identifier of this agent process
        </xs:documentation>
			</xs:annotation>
		</xs:attribute>
		<xs:attribute name="sender" type="SenderType" use="required">
			<xs:annotation>
				<xs:documentation>
          The sender of the message
        </xs:documentation>
			</xs:annotation>
		</xs:attribute>
		<xs:attribute name="deviceModelChangeTime" type="DeviceModelChangeTimeType" use="required">
			<xs:annotation>
				<xs:documentation>
          A timestamp in 8601 format of the last update of the Device
          information for any device
        </xs:documentation>
			</xs:annotation>
		</xs:attribute>
	</xs:attributeGroup>
	<xs:complexType name="HeaderType">
		<xs:annotation>
			<xs:documentation>
        Supplemental data usually placed at the beginning of a
        {{term(Document)}}.
      </xs:documentation>
		</xs:annotation>
		<xs:simpleContent>
			<xs:extension base="xs:string">
				<xs:attribute name="version" type="VersionType" use="required">
					<xs:annotation>
						<xs:documentation>
              unique identifier of the administered item. {{cite(ISO/IEC
              11179-:2015)}}
            </xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="creationTime" type="CreationTimeType" use="required">
					<xs:annotation>
						<xs:documentation>
              The time the file was created.
            </xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="testIndicator" type="TestIndicatorType" use="optional">
					<xs:annotation>
						<xs:documentation>
              Indicates that this was a test document
            </xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="instanceId" type="InstanceIdType" use="required">
					<xs:annotation>
						<xs:documentation>
              The unique instance identifier of this agent process
            </xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="sender" type="SenderType" use="required">
					<xs:annotation>
						<xs:documentation>
              The sender of the message
            </xs:documentation>
					</xs:annotation>
				</xs:attribute>
				<xs:attribute name="bufferSize" type="BufferSizeType" use="required">
					<xs:annotation>
						<xs:documentation>
              The size of the agent&apos;s buffer.
            </xs:documentation>
					</xs:annotation>
				</xs:attribute>
			</xs:extension>
		</xs:simpleContent>
	</xs:complexType>
	<xs:complexType name="MTConnectErrorType">
		<xs:annotation>
			<xs:documentation>
        The root node for MTConnect
      </xs:documentation>
		</xs:annotation>
		<xs:sequence>
			<xs:element name="Header" type="HeaderType">
				<xs:annotation>
					<xs:documentation>
            Supplemental data usually placed at the beginning of a
            {{term(Document)}}.
          </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:choice minOccurs="1">
				<xs:element name="Error" type="ErrorType">
					<xs:annotation>
						<xs:documentation>
              Only for backward compatibility with 1.0
            </xs:documentation>
					</xs:annotation>
				</xs:element>
				<xs:element name="Errors" type="ErrorsType">
					<xs:annotation>
						<xs:documentation>
              A collection of errors
            </xs:documentation>
					</xs:annotation>
				</xs:element>
			</xs:choice>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="ErrorsType">
		<xs:annotation>
			<xs:documentation>
        A collection of errors
      </xs:documentation>
		</xs:annotation>
		<xs:sequence>
			<xs:element name="Error" type="ErrorType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>
            An error result
          </xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:simpleType name="ErrorDescriptionType">
		<xs:annotation>
			<xs:documentation>
        The text description of the error
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string"/>
	</xs:simpleType>
	<xs:simpleType name="ErrorCodeType">
		<xs:annotation>
			<xs:documentation>
        The error code
      </xs:documentation>
		</xs:annotation>
		<xs:restriction base="xs:string">
			<xs:enumeration value="UNAUTHORIZED">
				<xs:annotation>
					<xs:documentation>
            The request did not have sufficient permissions to perform the
            request.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="NO_DEVICE">
				<xs:annotation>
					<xs:documentation>
            The device specified in the URI could not be found.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="OUT_OF_RANGE">
				<xs:annotation>
					<xs:documentation>
            The sequence number was beyond the end of the buffer.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="TOO_MANY">
				<xs:annotation>
					<xs:documentation>
            The count given is too large.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INVALID_URI">
				<xs:annotation>
					<xs:documentation>
            The URI provided was incorrect.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INVALID_REQUEST">
				<xs:annotation>
					<xs:documentation>
            The request was not one of the three specified requests.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INTERNAL_ERROR">
				<xs:annotation>
					<xs:documentation>
            Contact the software provider, the agent did not behave correctly.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="INVALID_PATH">
				<xs:annotation>
					<xs:documentation>
            The xpath could not be parsed. Invalid syntax.
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="UNSUPPORTED">
				<xs:annotation>
					<xs:documentation>
            The request is not supported by this implementation
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
			<xs:enumeration value="ASSET_NOT_FOUND">
				<xs:annotation>
					<xs:documentation>
            The asset ID cannot be found
          </xs:documentation>
				</xs:annotation>
			</xs:enumeration>
		</xs:restriction>
	</xs:simpleType>
	<xs:complexType name="ErrorType">
		<xs:annotation>
			<xs:documentation>
        An error description
      </xs:documentation>
		</xs:annotation>
		<xs:simpleContent>
			<xs:extension base="ErrorDescriptionType">
				<xs:attribute name="errorCode" type="ErrorCodeType" use="required">
					<xs:annotation>
						<xs:documentation>
              The error code
            </xs:documentation>
					</xs:annotation>
				</xs:attribute>
			</xs:extension>
		</xs:simpleContent>
	</xs:complexType>
</xs:schema>