help with ArduinoVNC

[xXhoobaXx]

Hello I am trying to connect my 7" screen (ZX7D00CE01S) to my Raspberry Pi, I followed the instructables step by step https://www.instructables.com/Arduino-Thin-Client/
i got it to connect to the server but the screen isn't displaying the remote
its only displaying

"Connect VNC
192.168.6.22:5900"

the serial monitor returns this on repeat :

!connected
01:05:06.880 -> [rfb_connect_to_server] Connected.
01:05:06.880 -> [_rfb_negotiate_protocol] Server protocol: RFB 003.008
01:05:06.880 -> [_rfb_negotiate_protocol] used protocol: RFB 003.008
01:05:06.880 ->
01:05:06.880 -> Authentication OK
01:05:06.880 -> [VNC-SERVER] VNC Server config - Name: iehab's X desktop (raspberrypi:1)
01:05:06.927 -> - width:800 height:480
01:05:06.927 -> - bpp:32 depth:24 bigendian:0 truecolor:1
01:05:06.927 -> - redmax:255 greenmax:255 bluemax:255
01:05:06.927 -> - redshift:16 greenshift:8 blueshift:0
01:05:06.927 -> [VNC-CLIENT] Supported Encodings:
01:05:06.927 -> - ZRLE
01:05:06.927 -> - Hextile
01:05:06.927 -> - RRE
01:05:06.927 -> - CoRRE
01:05:06.927 -> - Raw
01:05:06.927 -> [VNC-CLIENT] Supported Special Encodings:
01:05:06.927 -> - SetDesktopSize
01:05:06.927 -> - CursorPos
01:05:06.927 -> - ContinuousUpdates
01:05:06.927 -> - compresslevel: 4
01:05:06.927 -> [VNC-CLIENT] Client pixel format:
01:05:06.927 -> - width:800 height:480
01:05:06.927 -> - bpp:16 depth:16 bigEndian:0 trueColor:1
01:05:06.927 -> - red-max:31 green-max:63 blue-max:31
01:05:06.974 -> - red-shift:11 green-shift:5 blue-shift:0
01:05:06.974 -> vnc_connect Done.

please help

[moononournation]

may be try align the server parameters as client

[xXhoobaXx]

I got it to work using a different vnc server
tigervnc works so far happy to keep you updated if you want
now i need to figure out touch controls

[xXhoobaXx]

can you help me with TAMCTec GT911 touch library , the commands are different

[moononournation]

TouchLib also support GT911

[xXhoobaXx]

it doesn't work for some reason, even the example file in TouchLib
after staying up all night i did it and everything is working

[vicelikedust]

How did you get it working?
For me even in the TouchCalibration, it works for the first touch...takes a few tries then it stops responding...and sometimes just reboots a few times.