| section | x-masysma-name | title | date | lang | author | keywords | x-masysma-version | x-masysma-repository | x-masysma-website | x-masysma-owned | x-masysma-copyright | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
11 |
syssheet |
System Sheet Script |
2020/03/09 18:39:27 |
en-US |
|
|
1.0.0 |
1 |
Copyright (c) 2012-2020 Ma_Sys.ma.
For further info send an e-mail to Ma_Sys.ma@web.de.
|
syssheet -- System Sheet Script to display system information
syssheet [-g|-c|-f]
The MDVL System Sheet Script gives a one-screen system overview. It consists of the following panes:
General Information
: Displays the current user name, the terminal type the script is running on,
kernel and architecture information, date and time, hostname, uptime,
RAM usage and CPU types.
Network
: Displays the physical interfaces, their addresses (if assigned) and the
amount of data transmitted/received.
File systems
: Displays a subset of the mountpoints visible by df. For each mountpoint,
the amount of data used and total available space is displayed. If quota
is installed and quota are set, the current quota usage is displayed
below the file systems.
Users
: Displays the top process in terms of memory and the top process in terms of
CPU usage for each user
-g Draws the sheet using continuous lines instead of - and + signs.
-c Colorizes the output
-f Combines the effects of -g and -c
$ syssheet
+------- System Sheet Script 1.2.1, Copyright (c) 2012-2020 Ma_Sys.ma ---------+
| linux-fan (id 1000) on rxvt-unicode-256color Debian GNU/Linux 10 (buster) |
| Linux 4.19.0-8-amd64 x86_64 |
| 09.03.2020 18:42:26 pte5 |
| up 1:31, 8 users, load avg: 0.10, 0.21, 0.15 1803/32121 MiB |
| 8 Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz |
+---------------------------------- Network -----------------------------------+
| Interface Sent/MiB Received/MiB Address |
| eno1 0 0 |
| eno2 198 10500 192.168.1.16/24 |
| ens2 0 0 192.168.2.1/30 |
+------------------------------- File systems ---------------------------------+
| Mountpoint Used/GiB Of/GiB Percentage |
| / 186 251 76% |
| /fs/ll 1225 1563 80% |
| /fs/e01 1415 1615 93% |
| /data 98 216 48% |
+----------------------------------- Users ------------------------------------+
| Username MEM/MiB Top/MEM CPU Top/CPU Time/min |
| linux-fan 1747 firefox-esr 13.4% Xorg 10 |
| root 376 dockerd 0.4% docker-containe 0 |
| www-data 69 apache2 0% apache2 0 |
| colord 13 colord 0% colord 0 |
+------------------------------------------------------------------------------+
$ syssheet -g
┌─────── System Sheet Script 1.2.1, Copyright (c) 2012-2020 Ma_Sys.ma ─────────┐
│ linux-fan (id 1000) on rxvt-unicode-256color Debian GNU/Linux 10 (buster) │
│ Linux 4.19.0-8-amd64 x86_64 │
│ 09.03.2020 18:41:57 pte5 │
│ up 1:30, 8 users, load avg: 0.16, 0.23, 0.16 1800/32121 MiB │
│ 8 Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz │
├────────────────────────────────── Network ───────────────────────────────────┤
│ Interface Sent/MiB Received/MiB Address │
│ eno1 0 0 │
│ eno2 198 10500 192.168.1.16/24 │
│ ens2 0 0 192.168.2.1/30 │
├─────────────────────────────── File systems ─────────────────────────────────┤
│ Mountpoint Used/GiB Of/GiB Percentage │
│ / 186 251 76% │
│ /fs/ll 1225 1563 80% │
│ /fs/e01 1415 1615 93% │
│ /data 98 216 48% │
├─────────────────────────────────── Users ────────────────────────────────────┤
│ Username MEM/MiB Top/MEM CPU Top/CPU Time/min │
│ linux-fan 1747 firefox-esr 13.9% Xorg 10 │
│ root 376 dockerd 0.4% docker-containe 0 │
│ www-data 69 apache2 0% apache2 0 │
│ colord 13 colord 0% colord 0 │
└──────────────────────────────────────────────────────────────────────────────┘
This script is intended to be usable as a script to start by default in a new terminal. It makes sense for local, as well as remotely connected systems.
For local systems, it provides all basic troubleshooting information on a single screen, for remote systems, it immediately gives an idea about the current utilization of the system (e.g. other users performing compute-intensive tasks etc.)
Syssheet is intended to be smaller and run faster compared to some alterantives
like inxi at the expensive of providing only a fixed set of information.
Data from mountpoints and network interfaces is presented in a way which
attempts to mainly include physical filesystems and network interfaces as not
to obsucre the view by container mountpoints and interfaces. Compare the outputs
of ip link and mount against the typical syssheet-report to see the
difference.
To build a Debian package for this script, invoke ant package. If no package
is needed, everything is included in file syssheet and thus in a suitable
form for copying to remote systems. The only noteworthy dependency is gawk.
You can add syssheet to your bashrc as described in the following.
Add the following at the begin of the file:
[ -z "$PS1" ] && return # Terminate when not running interactively
export LINES
export COLUMNS
/usr/bin/syssheet -f &
sheetpid=$!
Add the following at the end of the file:
( sleep 3 && kill $sheetpid ) 2>&1 > /dev/null & sleeppid=$!
disown
wait $sheetpid
kill -s TERM $sleeppid 2> /dev/null
unset sheetpid
unset sleeppid
echo
These snippets start a syssheet in the background and stop it, if it does not
complete within three seconds. The time limit is important to avoid hangs due
to slow mountpoints. Adding the snippets in the begin and end respectively,
allows all other bashrc parts to run in parallel to the syssheet.
- Running without
gawkproduces garbled output. - Terminal needs to be at least 80 characters wide.
- Memory reports need to be considered approximations.
- Performance improvements welcome.