/
config.primary.sh
43 lines (33 loc) · 2.25 KB
/
config.primary.sh
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
#!/usr/bin/env bash
# *** INSTANCE-SPECIFIC CONFIGURATION OPTIONS ***
#
# cake-autorate will run one instance per config file present in the directory where
# cake-autorate is found (typically /root/cake-autorate). The config files must be in
# the directory in the form: config.instance.sh. Thus multiple instances of cake-autorate
# can be established by setting up appropriate config files like config.primary.sh and
# config.secondary.sh for the respective first and second instances of cake-autorate.
### For multihomed setups, it is the responsibility of the user to ensure that the probes
### sent by this instance of cake-autorate actually travel through these interfaces.
### See ping_extra_args and ping_prefix_string
dl_if=ifb-wan # download interface
ul_if=wan # upload interface
# Set either of the below to 0 to adjust one direction only
# or alternatively set both to 0 to simply use cake-autorate to monitor a connection
adjust_dl_shaper_rate=1 # enable (1) or disable (0) actually changing the dl shaper rate
adjust_ul_shaper_rate=1 # enable (1) or disable (0) actually changing the ul shaper rate
min_dl_shaper_rate_kbps=5000 # minimum bandwidth for download (Kbit/s)
base_dl_shaper_rate_kbps=20000 # steady state bandwidth for download (Kbit/s)
max_dl_shaper_rate_kbps=80000 # maximum bandwidth for download (Kbit/s)
min_ul_shaper_rate_kbps=5000 # minimum bandwidth for upload (Kbit/s)
base_ul_shaper_rate_kbps=20000 # steady state bandwidth for upload (KBit/s)
max_ul_shaper_rate_kbps=35000 # maximum bandwidth for upload (Kbit/s)
connection_active_thr_kbps=2000 # threshold in Kbit/s below which dl/ul is considered idle
# Logging toggles for various stats
output_processing_stats=0 # enable (1) or disable (0) output monitoring lines showing processing stats
output_load_stats=0 # enable (1) or disable (0) output monitoring lines showing achieved loads
output_reflector_stats=0 # enable (1) or disable (0) output monitoring lines showing reflector stats
output_summary_stats=0 # enable (1) or disable (0) output monitoring lines showing summary stats
# *** OVERRIDES ***
### See defaults.sh for additional configuration options
### that can be set in this configuration file to override the defaults.
### Place any such overrides below this line.