Skip to content

Latest commit

 

History

History
53 lines (40 loc) · 1.21 KB

coolit-guide.md

File metadata and controls

53 lines (40 loc) · 1.21 KB
Raw

Corsair Hydro H110i GT AIO liquid cooler

Driver API and source code available in liquidctl.driver.coolit.

New in git.

Initialization

The AIO does not need to be initialized prior to use, but it will set the pump mode to quiet.

# liquidctl initialize
Corsair H110i GT
└── Firmware version    2.0.0

When (re)initializing the device, it is possible to select the pump mode:

# liquidctl initialize --pump-mode extreme
Corsair H110i GT
└── Firmware version      2.0.0

Allowed pump modes are:

  • quiet
  • extreme

Device monitoring

Similarly to other AIOs, the cooler can report fan and pump speeds as well as the liquid temperature.

# liquidctl status
Corsair H110i GT
├── Liquid temperature    32.6  °C
├── Fan 1 speed           1130  rpm
├── Fan 2 speed           1130  rpm
└── Pump speed            2831  rpm

Fan speed control

Fan speeds can be configured either to fixed duty values or profiles. The profiles accept up to seven (liquid temperature, duty) points, and are interpolated by the device.

# liquidctl set fan speed 50
# liquidctl set fan speed 20 0 40 100