Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Installation of requirements failed on macOS Sonoma #18

Open
sinamatic opened this issue Dec 13, 2023 · 1 comment
Open

Installation of requirements failed on macOS Sonoma #18

sinamatic opened this issue Dec 13, 2023 · 1 comment

Comments

@sinamatic
Copy link

I get an error trying to install the requirements.

MacOS Sonoma 14.1.1
Python 3.7.17 Installed yesterday from source (https://www.python.org/downloads/release/python-3717/) because brew said "Error: python@3.7 has been disabled because it is deprecated upstream!"

Installed by using
./configure
make
make test
sudo make install

Changed to standard version by using:
vi ~/.bash_profile
alias python='/usr/local/bin/python3.7'

Tried with different python versions (3.8, 3.11 and 3.12), Same Error

Can you please help me? Thanks in advance.

sinasteinmuller@MBP-von-Sina ~ % python --version
Python 3.7.17
sinasteinmuller@MBP-von-Sina ~ % cd Developer/tello-gesture-control-main
sinasteinmuller@MBP-von-Sina tello-gesture-control-main % pip3 install -r requirements.txt
Collecting ConfigArgParse==1.2.3 (from -r requirements.txt (line 3))
Using cached ConfigArgParse-1.2.3.tar.gz (42 kB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Collecting djitellopy==1.5 (from -r requirements.txt (line 4))
Using cached djitellopy-1.5.tar.gz (5.8 kB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Collecting numpy==1.19.3 (from -r requirements.txt (line 5))
Using cached numpy-1.19.3.zip (7.3 MB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Collecting opencv_python==4.5.1.48 (from -r requirements.txt (line 6))
Using cached opencv-python-4.5.1.48.tar.gz (88.3 MB)
Installing build dependencies ... error
error: subprocess-exited-with-error

× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> [1230 lines of output]
Ignoring numpy: markers 'python_version == "3.6" and platform_machine != "aarch64"' don't match your environment
Ignoring numpy: markers 'python_version >= "3.6" and sys_platform == "linux" and platform_machine == "aarch64"' don't match your environment
Ignoring numpy: markers 'python_version == "3.7" and platform_machine != "aarch64"' don't match your environment
Ignoring numpy: markers 'python_version == "3.8" and platform_machine != "aarch64"' don't match your environment
Collecting setuptools
Using cached setuptools-69.0.2-py3-none-any.whl.metadata (6.3 kB)
Collecting wheel
Using cached wheel-0.42.0-py3-none-any.whl.metadata (2.2 kB)
Collecting scikit-build
Using cached scikit_build-0.17.6-py3-none-any.whl.metadata (14 kB)
Collecting cmake
Downloading cmake-3.28.0-py2.py3-none-macosx_10_10_universal2.macosx_10_10_x86_64.macosx_11_0_arm64.macosx_11_0_universal2.whl.metadata (6.3 kB)
Collecting pip
Using cached pip-23.3.1-py3-none-any.whl.metadata (3.5 kB)
Collecting numpy==1.19.3
Using cached numpy-1.19.3.zip (7.3 MB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Collecting distro (from scikit-build)
Using cached distro-1.8.0-py3-none-any.whl (20 kB)
Collecting packaging (from scikit-build)
Using cached packaging-23.2-py3-none-any.whl.metadata (3.2 kB)
Using cached setuptools-69.0.2-py3-none-any.whl (819 kB)
Using cached wheel-0.42.0-py3-none-any.whl (65 kB)
Using cached scikit_build-0.17.6-py3-none-any.whl (84 kB)
Downloading cmake-3.28.0-py2.py3-none-macosx_10_10_universal2.macosx_10_10_x86_64.macosx_11_0_arm64.macosx_11_0_universal2.whl (48.5 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 48.5/48.5 MB 11.7 MB/s eta 0:00:00
Using cached pip-23.3.1-py3-none-any.whl (2.1 MB)
Using cached packaging-23.2-py3-none-any.whl (53 kB)
Building wheels for collected packages: numpy
Building wheel for numpy (pyproject.toml): started
Building wheel for numpy (pyproject.toml): still running...
Building wheel for numpy (pyproject.toml): finished with status 'error'
error: subprocess-exited-with-error

    × Building wheel for numpy (pyproject.toml) did not run successfully.
    │ exit code: 1
    ╰─> [1182 lines of output]
        setup.py:67: RuntimeWarning: NumPy 1.19.3 may not yet support Python 3.11.
          warnings.warn(
        Running from numpy source directory.
        numpy/random/_bounded_integers.pxd.in has not changed
        numpy/random/_philox.pyx has not changed
        numpy/random/_bounded_integers.pyx.in has not changed
        numpy/random/_sfc64.pyx has not changed
        numpy/random/_mt19937.pyx has not changed
        numpy/random/bit_generator.pyx has not changed
        Processing numpy/random/_bounded_integers.pyx
        numpy/random/mtrand.pyx has not changed
        numpy/random/_generator.pyx has not changed
        numpy/random/_pcg64.pyx has not changed
        numpy/random/_common.pyx has not changed
        Cythonizing sources
        blas_opt_info:
        blas_mkl_info:
        customize UnixCCompiler
          libraries mkl_rt not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
          NOT AVAILABLE
  
        blis_info:
          libraries blis not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
          NOT AVAILABLE
  
        openblas_info:
          libraries openblas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
          NOT AVAILABLE
  
        atlas_3_10_blas_threads_info:
        Setting PTATLAS=ATLAS
          libraries tatlas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
          NOT AVAILABLE
  
        atlas_3_10_blas_info:
          libraries satlas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
          NOT AVAILABLE
  
        atlas_blas_threads_info:
        Setting PTATLAS=ATLAS
          libraries ptf77blas,ptcblas,atlas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
          NOT AVAILABLE
  
        atlas_blas_info:
          libraries f77blas,cblas,atlas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
          NOT AVAILABLE
  
        accelerate_info:
          libraries accelerate not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
        Library accelerate was not found. Ignoring
          libraries veclib not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
        Library veclib was not found. Ignoring
          FOUND:
            extra_compile_args = ['-msse3', '-I/System/Library/Frameworks/vecLib.framework/Headers']
            extra_link_args = ['-Wl,-framework', '-Wl,Accelerate']
            define_macros = [('NO_ATLAS_INFO', 3), ('HAVE_CBLAS', None)]
  
          FOUND:
            extra_compile_args = ['-msse3', '-I/System/Library/Frameworks/vecLib.framework/Headers']
            extra_link_args = ['-Wl,-framework', '-Wl,Accelerate']
            define_macros = [('NO_ATLAS_INFO', 3), ('HAVE_CBLAS', None)]
  
        non-existing path in 'numpy/distutils': 'site.cfg'
        lapack_opt_info:
        lapack_mkl_info:
          libraries mkl_rt not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
          NOT AVAILABLE
  
        openblas_lapack_info:
          libraries openblas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
          NOT AVAILABLE
  
        openblas_clapack_info:
          libraries openblas,lapack not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
          NOT AVAILABLE
  
        flame_info:
          libraries flame not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
          NOT AVAILABLE
  
        atlas_3_10_threads_info:
        Setting PTATLAS=ATLAS
          libraries lapack_atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
          libraries tatlas,tatlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
          libraries lapack_atlas not found in /usr/local/lib
          libraries tatlas,tatlas not found in /usr/local/lib
          libraries lapack_atlas not found in /usr/lib
          libraries tatlas,tatlas not found in /usr/lib
        <class 'numpy.distutils.system_info.atlas_3_10_threads_info'>
          NOT AVAILABLE
  
        atlas_3_10_info:
          libraries lapack_atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
          libraries satlas,satlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
          libraries lapack_atlas not found in /usr/local/lib
          libraries satlas,satlas not found in /usr/local/lib
          libraries lapack_atlas not found in /usr/lib
          libraries satlas,satlas not found in /usr/lib
        <class 'numpy.distutils.system_info.atlas_3_10_info'>
          NOT AVAILABLE
  
        atlas_threads_info:
        Setting PTATLAS=ATLAS
          libraries lapack_atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
          libraries ptf77blas,ptcblas,atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
          libraries lapack_atlas not found in /usr/local/lib
          libraries ptf77blas,ptcblas,atlas not found in /usr/local/lib
          libraries lapack_atlas not found in /usr/lib
          libraries ptf77blas,ptcblas,atlas not found in /usr/lib
        <class 'numpy.distutils.system_info.atlas_threads_info'>
          NOT AVAILABLE
  
        atlas_info:
          libraries lapack_atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
          libraries f77blas,cblas,atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
          libraries lapack_atlas not found in /usr/local/lib
          libraries f77blas,cblas,atlas not found in /usr/local/lib
          libraries lapack_atlas not found in /usr/lib
          libraries f77blas,cblas,atlas not found in /usr/lib
        <class 'numpy.distutils.system_info.atlas_info'>
          NOT AVAILABLE
  
          FOUND:
            extra_compile_args = ['-msse3', '-I/System/Library/Frameworks/vecLib.framework/Headers']
            extra_link_args = ['-Wl,-framework', '-Wl,Accelerate']
            define_macros = [('NO_ATLAS_INFO', 3), ('HAVE_CBLAS', None)]
  
        /private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-build-env-a3z4ds76/overlay/lib/python3.11/site-packages/setuptools/_distutils/dist.py:275: UserWarning: Unknown distribution option: 'define_macros'
          warnings.warn(msg)
        running bdist_wheel
        running build
        running config_cc
        unifing config_cc, config, build_clib, build_ext, build commands --compiler options
        running config_fc
        unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options
        running build_src
        build_src
        building py_modules sources
        building library "npymath" sources
          adding 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath' to include_dirs.
        None - nothing done with h_files = ['build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/npy_math_internal.h']
        building library "npysort" sources
          adding 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/common' to include_dirs.
        None - nothing done with h_files = ['build/src.macosx-10.9-universal2-3.11/numpy/core/src/common/npy_sort.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/common/npy_partition.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/common/npy_binsearch.h']
        building library "npyrandom" sources
        building extension "numpy.core._multiarray_tests" sources
        building extension "numpy.core._multiarray_umath" sources
          adding 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath' to include_dirs.
          adding 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath' to include_dirs.
          adding 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/common' to include_dirs.
        numpy.core - nothing done with h_files = ['build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/funcs.inc', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/simd.inc', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/loops.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/matmul.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/clip.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/npy_math_internal.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/common/templ_common.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/config.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/_numpyconfig.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/__multiarray_api.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/__ufunc_api.h']
        building extension "numpy.core._umath_tests" sources
        building extension "numpy.core._rational_tests" sources
        building extension "numpy.core._struct_ufunc_tests" sources
        building extension "numpy.core._operand_flag_tests" sources

…
…
…

        compile options: '-Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c'
        clang: numpy/core/src/npymath/npy_math.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/ieee754.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/npy_math_complex.c
        clang: numpy/core/src/npymath/halffloat.c
        xcrun: adding 4 object files to build/temp.macosx-10.9-universal2-3.11/libnpymath.a
        warning: /Library/Developer/CommandLineTools/usr/bin/ranlib: archive library: build/temp.macosx-10.9-universal2-3.11/libnpymath.a will be fat and ar(1) will not be able to operate on it
        ranlib:@ build/temp.macosx-10.9-universal2-3.11/libnpymath.a
        building 'npysort' library
        compiling C sources
        C compiler: clang -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch arm64 -arch x86_64 -g
  
        creating build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort
        compile options: '-Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c'
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/mergesort.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/quicksort.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/heapsort.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/radixsort.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/timsort.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/binsearch.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/selection.c
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        22 warnings generated.
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
                npy_intp k;
                ^~~~~~~~~~~
        numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
            else if (0 && kth == num - 1) {
                     ^
                     /* DISABLES CODE */ ( )
        22 warnings generated.
        xcrun: adding 7 object files to build/temp.macosx-10.9-universal2-3.11/libnpysort.a
        warning: /Library/Developer/CommandLineTools/usr/bin/ranlib: archive library: build/temp.macosx-10.9-universal2-3.11/libnpysort.a will be fat and ar(1) will not be able to operate on it
        ranlib:@ build/temp.macosx-10.9-universal2-3.11/libnpysort.a
        building 'npyrandom' library
        compiling C sources
        C compiler: clang -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch arm64 -arch x86_64 -g
  
        creating build/temp.macosx-10.9-universal2-3.11/numpy/random
        creating build/temp.macosx-10.9-universal2-3.11/numpy/random/src
        creating build/temp.macosx-10.9-universal2-3.11/numpy/random/src/distributions
        compile options: '-Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c'
        clang: numpy/random/src/distributions/logfactorial.c
        clang: numpy/random/src/distributions/distributions.c
        clang: numpy/random/src/distributions/random_mvhg_count.c
        clang: numpy/random/src/distributions/random_mvhg_marginals.c
        clang: numpy/random/src/distributions/random_hypergeometric.c
        xcrun: adding 5 object files to build/temp.macosx-10.9-universal2-3.11/libnpyrandom.a
        warning: /Library/Developer/CommandLineTools/usr/bin/ranlib: archive library: build/temp.macosx-10.9-universal2-3.11/libnpyrandom.a will be fat and ar(1) will not be able to operate on it
        ranlib:@ build/temp.macosx-10.9-universal2-3.11/libnpyrandom.a
        running build_ext
        customize UnixCCompiler
        customize UnixCCompiler using new_build_ext
        building 'numpy.core._multiarray_tests' extension
        compiling C sources
        C compiler: clang -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch arm64 -arch x86_64 -g
  
        creating build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray
        creating build/temp.macosx-10.9-universal2-3.11/numpy/core/src/common
        compile options: '-DNPY_INTERNAL_BUILD=1 -DHAVE_NPY_CONFIG_H=1 -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1 -D_LARGEFILE64_SOURCE=1 -Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c'
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/_multiarray_tests.c
        clang: numpy/core/src/common/mem_overlap.c
        clang -bundle -undefined dynamic_lookup -arch arm64 -arch x86_64 -g build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/_multiarray_tests.o build/temp.macosx-10.9-universal2-3.11/numpy/core/src/common/mem_overlap.o -Lbuild/temp.macosx-10.9-universal2-3.11 -lnpymath -o build/lib.macosx-10.9-universal2-3.11/numpy/core/_multiarray_tests.cpython-311-darwin.so
        building 'numpy.core._multiarray_umath' extension
        compiling C sources
        C compiler: clang -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch arm64 -arch x86_64 -g
  
        creating build/temp.macosx-10.9-universal2-3.11/numpy/core/src/multiarray
        creating build/temp.macosx-10.9-universal2-3.11/numpy/core/src/umath
        creating build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath
        creating build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/common
        creating build/temp.macosx-10.9-universal2-3.11/private
        creating build/temp.macosx-10.9-universal2-3.11/private/var
        creating build/temp.macosx-10.9-universal2-3.11/private/var/folders
        creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4
        creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn
        creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T
        creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny
        creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363
        creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy
        creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy/_build_utils
        creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy/_build_utils/src
        compile options: '-DNPY_INTERNAL_BUILD=1 -DHAVE_NPY_CONFIG_H=1 -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1 -D_LARGEFILE64_SOURCE=1 -DNO_ATLAS_INFO=3 -DHAVE_CBLAS -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/umath -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c'
        extra options: '-msse3 -I/System/Library/Frameworks/vecLib.framework/Headers'
        clang: numpy/core/src/multiarray/alloc.c
        clang: numpy/core/src/multiarray/array_assign_scalar.c
        clang: numpy/core/src/multiarray/common.c
        clang: numpy/core/src/multiarray/buffer.c
        clang: numpy/core/src/multiarray/datetime_strings.c
        clang: numpy/core/src/multiarray/conversion_utils.c
        clang: numpy/core/src/multiarray/descriptor.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/einsum.c
        numpy/core/src/multiarray/einsum.c.src:2158:32: warning: unknown warning group '-Wmaybe-uninitialized', ignored [-Wunknown-warning-option]
        #pragma GCC diagnostic ignored "-Wmaybe-uninitialized"
                                       ^
        clang: numpy/core/src/multiarray/arrayobject.c
        clang: numpy/core/src/multiarray/array_assign_array.c
        clang: numpy/core/src/multiarray/ctors.c
        clang: numpy/core/src/multiarray/convert.c
        clang: numpy/core/src/multiarray/datetime_busday.c
        clang: numpy/core/src/multiarray/calculation.c
        clang: numpy/core/src/multiarray/arrayfunction_override.c
        clang: numpy/core/src/multiarray/convert_datatype.c
        clang: numpy/core/src/multiarray/dragon4.c
        clang: numpy/core/src/multiarray/hashdescr.c
        clang: numpy/core/src/multiarray/datetime_busdaycal.c
        clang: numpy/core/src/multiarray/compiled_base.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/arraytypes.c
        clang: numpy/core/src/multiarray/item_selection.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/lowlevel_strided_loops.c
        clang: numpy/core/src/multiarray/multiarraymodule.c
        clang: numpy/core/src/multiarray/datetime.c
        clang: numpy/core/src/multiarray/dtype_transfer.c
        clang: numpy/core/src/multiarray/nditer_constr.c
        1 warning generated.
        clang: numpy/core/src/multiarray/iterators.c
        clang: numpy/core/src/multiarray/refcount.c
        numpy/core/src/multiarray/einsum.c.src:2158:32: warning: unknown warning group '-Wmaybe-uninitialized', ignored [-Wunknown-warning-option]
        #pragma GCC diagnostic ignored "-Wmaybe-uninitialized"
                                       ^
        clang: numpy/core/src/multiarray/scalarapi.c
        clang: numpy/core/src/multiarray/sequence.c
        numpy/core/src/multiarray/scalarapi.c:759:38: warning: 'ob_shash' is deprecated [-Wdeprecated-declarations]
                    ((PyStringObject *)obj)->ob_shash = -1;
                                             ^
        /Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/cpython/bytesobject.h:7:5: note: 'ob_shash' has been explicitly marked deprecated here
            Py_DEPRECATED(3.11) Py_hash_t ob_shash;
            ^
        /Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyport.h:336:54: note: expanded from macro 'Py_DEPRECATED'
        #define Py_DEPRECATED(VERSION_UNUSED) __attribute__((__deprecated__))
                                                             ^
        1 warning generated.
        clang: numpy/core/src/multiarray/shape.c
        numpy/core/src/multiarray/scalarapi.c:759:38: warning: 'ob_shash' is deprecated [-Wdeprecated-declarations]
                    ((PyStringObject *)obj)->ob_shash = -1;
                                             ^
        /Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/cpython/bytesobject.h:7:5: note: 'ob_shash' has been explicitly marked deprecated here
            Py_DEPRECATED(3.11) Py_hash_t ob_shash;
            ^
        /Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyport.h:336:54: note: expanded from macro 'Py_DEPRECATED'
        #define Py_DEPRECATED(VERSION_UNUSED) __attribute__((__deprecated__))
                                                             ^
        1 warning generated.
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/scalartypes.c
        clang: numpy/core/src/multiarray/nditer_pywrap.c
        numpy/core/src/multiarray/scalartypes.c.src:1880:9: warning: variable 'i' set but not used [-Wunused-but-set-variable]
            int i;
                ^
        numpy/core/src/multiarray/scalartypes.c.src:1880:9: warning: variable 'i' set but not used [-Wunused-but-set-variable]
            int i;
                ^
        numpy/core/src/multiarray/scalartypes.c.src:1880:9: warning: variable 'i' set but not used [-Wunused-but-set-variable]
            int i;
                ^
        numpy/core/src/multiarray/scalartypes.c.src:1880:9: warning: variable 'i' set but not used [-Wunused-but-set-variable]
            int i;
                ^
        numpy/core/src/multiarray/scalartypes.c.src:2967:65: error: too few arguments to function call, expected 2, have 1
            return _Py_HashDouble((double) PyArrayScalar_VAL(obj, Float));
                   ~~~~~~~~~~~~~~                                       ^
        /Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
        PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
                              ^
        numpy/core/src/multiarray/scalartypes.c.src:2976:48: error: too few arguments to function call, expected 2, have 1
                    PyArrayScalar_VAL(obj, CFloat).real);
                                                       ^
        /Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
        PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
                              ^
        clang: numpy/core/src/multiarray/temp_elide.c
        numpy/core/src/multiarray/scalartypes.c.src:2982:48: error: too few arguments to function call, expected 2, have 1
                    PyArrayScalar_VAL(obj, CFloat).imag);
                                                       ^
        /Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
        PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
                              ^
        numpy/core/src/multiarray/scalartypes.c.src:2967:70: error: too few arguments to function call, expected 2, have 1
            return _Py_HashDouble((double) PyArrayScalar_VAL(obj, LongDouble));
                   ~~~~~~~~~~~~~~                                            ^
        /Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
        PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
                              ^
        numpy/core/src/multiarray/scalartypes.c.src:2976:53: error: too few arguments to function call, expected 2, have 1
                    PyArrayScalar_VAL(obj, CLongDouble).real);
                                                            ^
        /Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
        PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
                              ^
        numpy/core/src/multiarray/scalartypes.c.src:2982:53: error: too few arguments to function call, expected 2, have 1
                    PyArrayScalar_VAL(obj, CLongDouble).imag);
                                                            ^
        /Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
        PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
                              ^
        numpy/core/src/multiarray/scalartypes.c.src:2997:75: error: too few arguments to function call, expected 2, have 1
            return _Py_HashDouble(npy_half_to_double(PyArrayScalar_VAL(obj, Half)));
                   ~~~~~~~~~~~~~~                                                 ^
        /Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
        PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
                              ^
        4 warnings and 7 errors generated.
        clang: numpy/core/src/multiarray/vdot.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/nditer_templ.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/loops.c
        clang: numpy/core/src/multiarray/typeinfo.c
        clang: numpy/core/src/umath/umathmodule.c
        clang: numpy/core/src/multiarray/usertypes.c
        clang: numpy/core/src/umath/reduction.c
        clang: numpy/core/src/multiarray/number.c
        clang: numpy/core/src/umath/ufunc_object.c
        clang: numpy/core/src/umath/ufunc_type_resolution.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/ieee754.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/npy_math_complex.c
        numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
                npy_intp n = dimensions[0];
                             ^~~~~~~~~~
        numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
            if (IS_BINARY_REDUCE && 0) {
                                    ^
                                    /* DISABLES CODE */ ( )
        numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
                npy_intp n = dimensions[0];
                             ^~~~~~~~~~
        numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
            if (IS_BINARY_REDUCE && 0) {
                                    ^
                                    /* DISABLES CODE */ ( )
        numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
                npy_intp n = dimensions[0];
                             ^~~~~~~~~~
        numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
            if (IS_BINARY_REDUCE && 0) {
                                    ^
                                    /* DISABLES CODE */ ( )
        clang: numpy/core/src/umath/override.c
        clang: numpy/core/src/npymath/halffloat.c
        clang: numpy/core/src/multiarray/nditer_api.c
        1 warning generated.
        clang: numpy/core/src/multiarray/flagsobject.c
        clang: numpy/core/src/common/array_assign.c
        clang: numpy/core/src/npymath/npy_math.c
        clang: numpy/core/src/multiarray/getset.c
        clang: numpy/core/src/common/mem_overlap.c
        clang: numpy/core/src/common/ucsnarrow.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/common/npy_cpu_features.c
        clang: numpy/core/src/common/ufunc_override.c
        clang: numpy/core/src/umath/extobj.c
        clang: /private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy/_build_utils/src/apple_sgemv_fix.c
        clang: numpy/core/src/common/cblasfuncs.c
        In file included from /private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy/_build_utils/src/apple_sgemv_fix.c:26:
        In file included from numpy/core/include/numpy/arrayobject.h:4:
        In file included from numpy/core/include/numpy/ndarrayobject.h:21:
        build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/__multiarray_api.h:1463:1: warning: unused function '_import_array' [-Wunused-function]
        _import_array(void)
        ^
        clang: numpy/core/src/common/npy_longdouble.c
        1 warning generated.
        clang: numpy/core/src/common/numpyos.c
        In file included from /private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy/_build_utils/src/apple_sgemv_fix.c:26:
        In file included from numpy/core/include/numpy/arrayobject.h:4:
        In file included from numpy/core/include/numpy/ndarrayobject.h:21:
        build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/__multiarray_api.h:1463:1: warning: unused function '_import_array' [-Wunused-function]
        _import_array(void)
        ^
        1 warning generated.
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/scalarmath.c
        clang: numpy/core/src/common/python_xerbla.c
        clang: numpy/core/src/multiarray/mapping.c
        clang: numpy/core/src/multiarray/methods.c
        3 warnings generated.
        numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
                npy_intp n = dimensions[0];
                             ^~~~~~~~~~
        numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
            if (IS_BINARY_REDUCE && 0) {
                                    ^
                                    /* DISABLES CODE */ ( )
        numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
                npy_intp n = dimensions[0];
                             ^~~~~~~~~~
        numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
            if (IS_BINARY_REDUCE && 0) {
                                    ^
                                    /* DISABLES CODE */ ( )
        numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
                npy_intp n = dimensions[0];
                             ^~~~~~~~~~
        numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
            if (IS_BINARY_REDUCE && 0) {
                                    ^
                                    /* DISABLES CODE */ ( )
        3 warnings generated.
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/matmul.c
        clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/clip.c
        error: Command "clang -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch arm64 -arch x86_64 -g -DNPY_INTERNAL_BUILD=1 -DHAVE_NPY_CONFIG_H=1 -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1 -D_LARGEFILE64_SOURCE=1 -DNO_ATLAS_INFO=3 -DHAVE_CBLAS -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/umath -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/scalartypes.c -o build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/scalartypes.o -MMD -MF build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/scalartypes.o.d -msse3 -I/System/Library/Frameworks/vecLib.framework/Headers" failed with exit status 1
        [end of output]
  
    note: This error originates from a subprocess, and is likely not a problem with pip.
    ERROR: Failed building wheel for numpy
  Failed to build numpy
  ERROR: Could not build wheels for numpy, which is required to install pyproject.toml-based projects
  [end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error

× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.
@kinivi
Copy link
Owner

kinivi commented Dec 13, 2023

Smth wrong with numpy versioning. Can you try the anaconda(miniconda\ conda forge) environment?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@kinivi @sinamatic