WiFiNINA_Generic v1.8.14-5 Communication with WiFi module failed!

[Givy]

Hi,
Can "SAMD51 ADAFRUIT_GRAND_CENTRAL_M4" pin setting be added to the "WiFiNINA_Pinout_Generic.h" to work with the ADAFRUIT_Airlift?

Thank you.

[khoih-prog]

Thanks for your idea.

The obstacle is that I don't have that ADAFRUIT_GRAND_CENTRAL_M4 board + Airlift to test. But it's easy for you to add some short and simple code to support the combinations.

Check

WiFiNINA_Generic/src/WiFiNINA_Pinout_Generic.h

Lines 244 to 259 in a239f8e

	#elif ( defined(ADAFRUIT_MATRIXPORTAL_M4_EXPRESS) )
	#warning You have to modify pin usage according to actual connection for SAMD51 ADAFRUIT_MATRIXPORTAL_M4_EXPRESS
	// To define pin out for WiFiNINA here
	//#define PINS_COUNT (60u)
	//NINA
	#define NINA_GPIO0 ESP32_GPIO0
	#define NINA_RESETN ESP32_RESETN
	#define NINA_ACK SPIWIFI_ACK
	#define SPIWIFI_SS 33
	#define SPIWIFI_ACK 31
	#define SPIWIFI_RESET ESP32_RESETN
	#else

Then you can add something similar, to the WiFiNINA_Pinout_Generic.h from line #259, such as

    #elif ( defined(ADAFRUIT_GRAND_CENTRAL_M4)  )  
      
      #warning You have to modify pin usage according to actual connection for SAMD51 DADAFRUIT_GRAND_CENTRAL_M4
      // To define pin out for WiFiNINA here


      //#define PINS_COUNT           (60u)
      //NINA     
      #define NINA_GPIO0      ESP32_GPIO0
      #define NINA_RESETN     ESP32_RESETN
      #define NINA_ACK        SPIWIFI_ACK


      #define SPIWIFI_SS      33           //  <=========== You have to modify here
      #define SPIWIFI_ACK     31           //  <=========== You have to modify here
      #define SPIWIFI_RESET   ESP32_RESETN           //  <=========== You have to modify here
      
    #else

Good Luck,