3.75.6.2024031 bootet nicht von USB #2688
Labels
🐛 bug-report
Something isn't working
💻 hardware support
This issue refs tickets/issue introducing/fixing some hardware support
platform/raspberrypi
RaspberryPi platform
Milestone
Comments
|
Bitte den genauen Typ (USB identifier) des USB<>SSD Adapters hier spezifizieren/niederlegen. |
jens-maus
changed the title
|
In deinem Video sieht man diese relevante Stelle. D.h. er kommt ja bis 
Bricht dann aber wohl wie es aussieht ab. Um das nun genauer analysieren zu können bräuchte es in der Tat den genauen Typ dieses USB<>SSD Adapters samt USB identifieren. Dazu bitte mal |
|
Hallo Jens, danke und gerne: Den CUL-Stick hatte ich übrigens testweise auch ausgestöpselt, der hat also nicht reingegrätscht. Ich hatte ein sehr ähnliches Problem übrigens schon mal (#2240). Ich könnte mir laienhaft vorstellen, das da ein Bug im Kernel gefixed wurde, der jetzt wieder da ist. |
|
Ist es der 8GB Pi4B? Der will nicht mehr von USB booten, der Adapter spielt da m.E. erstmal keine Rolle da die 2GB und 4GB Version weiterhin booten. |
|
Es wurde ein einfacher funktionaler Workaround gefunden. |
So ganz kann das nicht stimmen. Wie in der dmesg Ausgabe von @Troubadix zu sehen hat er einen Pi4 mit 4GB RAM. Siehe: Entweder sind das also zweit getrennte Probleme (1. bestimmte USB<>SSD Adapter wollen nicht mehr mit neueren Kernels, etc. und 2. der Pi4 8GB will gar nicht mehr von irgendeinem USB<>SSD Adapter booten). |
|
Ja, gut. Das Problem mit den Adaptern ist primär der UAS-Mode. Das kann man umgehen wenn man die USB-SSD an USB2 hängt. Hier mal der dmesg output des, mit dem Workaround gestarteten, Pi4B 8GB. dmesg[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.6.21 (builder@e279c14b8740) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot -gb846eb6-dirty) 12.3.0, GNU ld (GNU Binutils) 2.40) #1 SMP PREEMPT Tue Mar 19 02:24:09 UTC 2024
[ 0.000000] Kernel is locked down from Kernel configuration; see man kernel_lockdown.7
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000002ac00000..0x000000002ebfffff (65536 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x000000003ee63c00..0x000000003ee63fff (1 KiB) nomap non-reusable nvram@1
[ 0.000000] OF: reserved mem: 0x000000003ee64040..0x000000003ee64081 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003defffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA32: 8448 pages in unavailable ranges
[ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 30 pages/cpu s85864 r8192 d28824 u122880
[ 0.000000] pcpu-alloc: s85864 r8192 d28824 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: dwc_otg.lpm_enable=0 sdhci_bcm2708.enable_llm=0 console=tty2 root=PARTUUID=deedbeef-02 ro rootfstype=ext4 fsck.repair=yes rootwait rootdelay=5 consoleblank=120 logo.nologo quiet loglevel=0 init_on_alloc=1 init_on_free=1 slab_nomerge iomem=relaxed net.ifnames=0 usb-storage.quirks=174c:55aa:u,2109:0715:u,152d:0578:u,152d:0579:u,152d:1561:u,174c:0829:u,14b0:0206:u,174c:225c:u,7825:a2a4:u,152d:0562:u coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:48:B9:6B vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 empty
[ 0.000000] Unknown kernel command line parameters "empty", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2039552
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:on
[ 0.000000] mem auto-init: clearing system memory may take some time...
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000039f00000-0x000000003df00000] (64MB)
[ 0.000000] Memory: 7965040K/8289280K available (16512K kernel code, 2184K rwdata, 4524K rodata, 5120K init, 1076K bss, 258704K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 45486 entries in 178 pages
[ 0.000000] ftrace: allocated 178 pages with 4 groups
[ 0.000000] Lockdown: swapper: use of tracefs is restricted; see man kernel_lockdown.7
[ 0.000000] Tracing disabled due to lockdown
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000370] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.000556] Console: colour dummy device 80x25
[ 0.000570] printk: console [tty2] enabled
[ 0.000681] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000700] pid_max: default: 32768 minimum: 301
[ 0.001021] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity
[ 0.001202] landlock: Up and running.
[ 0.001209] Yama: becoming mindful.
[ 0.001320] AppArmor: AppArmor initialized
[ 0.001531] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.001550] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.002665] cgroup: Disabling memory control group subsystem
[ 0.004635] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.004798] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.004903] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.005203] rcu: Hierarchical SRCU implementation.
[ 0.005213] rcu: Max phase no-delay instances is 1000.
[ 0.007310] EFI services will not be available.
[ 0.007662] smp: Bringing up secondary CPUs ...
[ 0.008356] Detected PIPT I-cache on CPU1
[ 0.008488] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.009252] Detected PIPT I-cache on CPU2
[ 0.009347] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.010042] Detected PIPT I-cache on CPU3
[ 0.010137] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.010233] smp: Brought up 1 node, 4 CPUs
[ 0.010252] SMP: Total of 4 processors activated.
[ 0.010262] CPU features: detected: 32-bit EL0 Support
[ 0.010267] CPU features: detected: 32-bit EL1 Support
[ 0.010277] CPU features: detected: CRC32 instructions
[ 0.010391] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.010404] CPU: All CPU(s) started at EL2
[ 0.010424] alternatives: applying system-wide alternatives
[ 0.014338] devtmpfs: initialized
[ 0.026433] Enabled cp15_barrier support
[ 0.026468] Enabled setend support
[ 0.026643] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.026673] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.026801] Lockdown: swapper/0: use of tracefs is restricted; see man kernel_lockdown.7
[ 0.026810] Can not register tracer wakeup due to lockdown
[ 0.026822] Lockdown: swapper/0: use of tracefs is restricted; see man kernel_lockdown.7
[ 0.026830] Can not register tracer function_graph due to lockdown
[ 0.069895] pinctrl core: initialized pinctrl subsystem
[ 0.070507] DMI not present or invalid.
[ 0.071104] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.075574] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.075899] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.076999] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.077166] audit: initializing netlink subsys (disabled)
[ 0.077440] audit: type=2000 audit(0.076:1): state=initialized audit_enabled=0 res=1
[ 0.078009] thermal_sys: Registered thermal governor 'step_wise'
[ 0.078078] cpuidle: using governor menu
[ 0.078750] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.078883] ASID allocator initialised with 32768 entries
[ 0.086733] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.097077] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:39:16, variant start
[ 0.101095] raspberrypi-firmware soc:firmware: Firmware hash is 30f0c5e4d076da3ab4f341d88e7d505760b93ad7
[ 0.111522] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[ 0.111539] Modules: 0 pages in range for non-PLT usage
[ 0.111546] Modules: 516880 pages in range for PLT usage
[ 0.113819] bcm2835-dma fe007000.dma-controller: DMA legacy API manager, dmachans=0x1
[ 0.117108] iommu: Default domain type: Translated
[ 0.117123] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.117569] SCSI subsystem initialized
[ 0.117797] libata version 3.00 loaded.
[ 0.118008] usbcore: registered new interface driver usbfs
[ 0.118051] usbcore: registered new interface driver hub
[ 0.118103] usbcore: registered new device driver usb
[ 0.118484] pps_core: LinuxPPS API ver. 1 registered
[ 0.118494] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.118516] PTP clock support registered
[ 0.119764] vgaarb: loaded
[ 0.120671] clocksource: Switched to clocksource arch_sys_counter
[ 0.120686] Lockdown: swapper/0: use of tracefs is restricted; see man kernel_lockdown.7
[ 0.120695] Tracing disabled due to lockdown
[ 0.120702] Lockdown: swapper/0: use of tracefs is restricted; see man kernel_lockdown.7
[ 0.120710] Tracing disabled due to lockdown
[ 0.120717] Lockdown: swapper/0: use of tracefs is restricted; see man kernel_lockdown.7
[ 0.120724] Tracing disabled due to lockdown
[ 0.120733] Lockdown: swapper/0: use of tracefs is restricted; see man kernel_lockdown.7
[ 0.120740] Tracing disabled due to lockdown
[ 0.120750] Lockdown: swapper/0: use of tracefs is restricted; see man kernel_lockdown.7
[ 0.120757] Tracing disabled due to lockdown
[ 0.121386] VFS: Disk quotas dquot_6.6.0
[ 0.121442] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.121565] FS-Cache: Loaded
[ 0.121768] CacheFiles: Loaded
[ 0.122319] AppArmor: AppArmor Filesystem Enabled
[ 0.132166] NET: Registered PF_INET protocol family
[ 0.132306] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.141531] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.141641] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.141717] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.142121] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.144813] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.145220] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.145569] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.145672] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.145995] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.146750] RPC: Registered named UNIX socket transport module.
[ 0.146763] RPC: Registered udp transport module.
[ 0.146770] RPC: Registered tcp transport module.
[ 0.146776] RPC: Registered tcp-with-tls transport module.
[ 0.146783] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.146813] PCI: CLS 0 bytes, default 64
[ 0.148116] kvm [1]: IPA Size Limit: 44 bits
[ 0.149589] kvm [1]: vgic interrupt IRQ9
[ 0.149635] kvm [1]: Hyp mode initialized successfully
[ 0.151098] Lockdown: swapper/0: use of tracefs is restricted; see man kernel_lockdown.7
[ 0.151113] Tracing disabled due to lockdown
[ 0.151123] Lockdown: swapper/0: use of tracefs is restricted; see man kernel_lockdown.7
[ 0.151131] Can not register tracer blk due to lockdown
[ 0.151137] blktrace: Warning: could not register the block tracer
[ 0.151390] Initialise system trusted keyrings
[ 0.151662] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 0.153370] NFS: Registering the id_resolver key type
[ 0.153403] Key type id_resolver registered
[ 0.153410] Key type id_legacy registered
[ 0.153444] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.153463] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.153500] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.154816] Key type asymmetric registered
[ 0.154828] Asymmetric key parser 'x509' registered
[ 0.154901] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.155101] io scheduler mq-deadline registered
[ 0.155114] io scheduler kyber registered
[ 0.155172] io scheduler bfq registered
[ 0.160349] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.160385] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 0.160429] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 0.160466] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000
[ 0.161469] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.161489] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.161505] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 0.161557] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.161651] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.165577] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
[ 0.165729] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
[ 0.165790] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
[ 0.274766] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 0.274921] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.275013] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.275295] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.284783] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 0.284808] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 0.284870] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.284883] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 0.285187] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 0.285350] pcieport 0000:00:00.0: PME: Signaling with IRQ 26
[ 0.285705] pcieport 0000:00:00.0: AER: enabled with IRQ 26
[ 0.286690] simple-framebuffer 3e2fe000.framebuffer: framebuffer at 0x3e2fe000, 0x7e9000 bytes
[ 0.286707] simple-framebuffer 3e2fe000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[ 0.287387] Console: switching to colour frame buffer device 240x67
[ 0.295781] simple-framebuffer 3e2fe000.framebuffer: fb0: simplefb registered!
[ 0.300856] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.302886] iproc-rng200 fe104000.rng: hwrng registered
[ 0.303128] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
[ 0.315177] brd: module loaded
[ 0.322105] loop: module loaded
[ 0.322683] zram: Added device: zram0
[ 0.323299] Loading iSCSI transport class v2.0-870.
[ 0.327042] tun: Universal TUN/TAP device driver, 1.6
[ 0.328088] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 0.524786] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 0.571797] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.571842] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 0.576477] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0300240000000890
[ 0.577433] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.577457] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 0.577481] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 0.577793] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 0.577811] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.577823] usb usb1: Product: xHCI Host Controller
[ 0.577832] usb usb1: Manufacturer: Linux 6.6.21 xhci-hcd
[ 0.577842] usb usb1: SerialNumber: 0000:01:00.0
[ 0.578516] hub 1-0:1.0: USB hub found
[ 0.578570] hub 1-0:1.0: 1 port detected
[ 0.579244] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 0.579262] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.579274] usb usb2: Product: xHCI Host Controller
[ 0.579285] usb usb2: Manufacturer: Linux 6.6.21 xhci-hcd
[ 0.579294] usb usb2: SerialNumber: 0000:01:00.0
[ 0.579813] hub 2-0:1.0: USB hub found
[ 0.579864] hub 2-0:1.0: 4 ports detected
[ 0.580952] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.581057] dwc_otg: FIQ enabled
[ 0.581064] dwc_otg: NAK holdoff enabled
[ 0.581071] dwc_otg: FIQ split-transaction FSM enabled
[ 0.581085] Module dwc_common_port init
[ 0.581790] usbcore: registered new interface driver uas
[ 0.581853] usbcore: registered new interface driver usb-storage
[ 0.581961] usbcore: registered new interface driver usbserial_generic
[ 0.582000] usbserial: USB Serial support registered for generic
[ 0.582447] Driver for 1-wire Dallas network protocol.
[ 0.583827] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 0.586516] sdhci: Secure Digital Host Controller Interface driver
[ 0.586531] sdhci: Copyright(c) Pierre Ossman
[ 0.586751] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
[ 0.586761] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.591600] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.591703] hid: raw HID events driver (C) Jiri Kosina
[ 0.591827] usbcore: registered new interface driver usbhid
[ 0.591831] usbhid: USB HID core driver
[ 0.594810] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.595954] NET: Registered PF_INET6 protocol family
[ 0.596599] Segment Routing with IPv6
[ 0.596619] In-situ OAM (IOAM) with IPv6
[ 0.596738] NET: Registered PF_PACKET protocol family
[ 0.596756] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.596803] Key type dns_resolver registered
[ 0.608414] registered taskstats version 1
[ 0.608556] Loading compiled-in X.509 certificates
[ 0.610655] Loaded X.509 cert 'Build time autogenerated kernel key: 936823f38226f612e3a14115cf5f5e0198846e60'
[ 0.618362] Key type .fscrypt registered
[ 0.618377] Key type fscrypt-provisioning registered
[ 0.618442] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.623527] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 35, base_baud = 62500000) is a 16550
[ 0.623997] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.624119] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 0.624492] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 0.624500] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 0.652566] of_cfs_init
[ 0.652822] of_cfs_init: OK
[ 0.653133] clk: Disabling unused clocks
[ 0.654274] Waiting 5 sec before mounting root device...
[ 0.690278] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 0.730937] mmc1: new high speed SDIO card at address 0001
[ 0.777212] mmc0: new high speed SDHC card at address bb03
[ 0.778070] mmcblk0: mmc0:bb03 SD08G 7.42 GiB
[ 0.780755] mmcblk0: p1
[ 0.781091] mmcblk0: mmc0:bb03 SD08G 7.42 GiB
[ 0.832698] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 0.983440] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 0.983464] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 0.983477] usb 1-1: Product: USB2.0 Hub
[ 0.985081] hub 1-1:1.0: USB hub found
[ 0.985400] hub 1-1:1.0: 4 ports detected
[ 1.108998] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.130344] usb 2-2: New USB device found, idVendor=152d, idProduct=0579, bcdDevice= 5.06
[ 1.130362] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.130375] usb 2-2: Product: Portable SSD
[ 1.130386] usb 2-2: Manufacturer: Intenso
[ 1.130396] usb 2-2: SerialNumber: 20210323101B4
[ 1.133330] usb 2-2: UAS is ignored for this device, using usb-storage instead
[ 1.133415] usb 2-2: UAS is ignored for this device, using usb-storage instead
[ 1.133427] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 1.133894] usb-storage 2-2:1.0: Quirks match for vid 152d pid 0579: 800000
[ 1.134031] scsi host0: usb-storage 2-2:1.0
[ 1.280714] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd
[ 1.382144] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[ 1.382162] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.382175] usb 1-1.3: Product: USB2.0 Hub
[ 1.383936] hub 1-1.3:1.0: USB hub found
[ 1.384285] hub 1-1.3:1.0: 4 ports detected
[ 1.464707] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd
[ 1.569914] usb 1-1.4: New USB device found, idVendor=1b1f, idProduct=c020, bcdDevice= 1.00
[ 1.569933] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.569945] usb 1-1.4: Product: eQ-3 HmIP-RFUSB
[ 1.569956] usb 1-1.4: Manufacturer: Silicon Labs
[ 1.569965] usb 1-1.4: SerialNumber: 3014F711A0000420C9A17A0A
[ 1.676695] usb 1-1.3.2: new low-speed USB device number 5 using xhci_hcd
[ 1.786569] usb 1-1.3.2: New USB device found, idVendor=03f0, idProduct=1198, bcdDevice= 7.04
[ 1.786588] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.786600] usb 1-1.3.2: Product: HP USB 1000dpi Laser Mouse
[ 1.786610] usb 1-1.3.2: Manufacturer: HP
[ 1.798490] input: HP HP USB 1000dpi Laser Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/0003:03F0:1198.0001/input/input0
[ 1.798882] hid-generic 0003:03F0:1198.0001: input,hidraw0: USB HID v2.00 Mouse [HP HP USB 1000dpi Laser Mouse] on usb-0000:01:00.0-1.3.2/input0
[ 1.805024] hid-generic 0003:03F0:1198.0002: hiddev96,hidraw1: USB HID v2.00 Device [HP HP USB 1000dpi Laser Mouse] on usb-0000:01:00.0-1.3.2/input1
[ 1.884704] usb 1-1.3.4: new low-speed USB device number 6 using xhci_hcd
[ 1.994348] usb 1-1.3.4: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=49.00
[ 1.994367] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.994379] usb 1-1.3.4: Product: USB Keyboard
[ 1.994389] usb 1-1.3.4: Manufacturer: Logitech
[ 2.008052] input: Logitech USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.0/0003:046D:C31C.0003/input/input1
[ 2.065325] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:01:00.0-1.3.4/input0
[ 2.074658] input: Logitech USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.1/0003:046D:C31C.0004/input/input2
[ 2.133030] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:01:00.0-1.3.4/input1
[ 2.149594] scsi 0:0:0:0: Direct-Access Intenso Portable SSD 0506 PQ: 0 ANSI: 6
[ 2.150841] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.151569] sd 0:0:0:0: [sda] Write Protect is off
[ 2.151586] sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08
[ 2.152252] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.155530] sda: sda1 sda2 sda3
[ 2.156196] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.877363] EXT4-fs (sda2): orphan cleanup on readonly fs
[ 5.877554] EXT4-fs (sda2): mounted filesystem 725941cd-d229-4e0d-ac24-59755e9c719e ro with ordered data mode. Quota mode: none.
[ 5.877615] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 5.877926] devtmpfs: mounted
[ 5.883532] Freeing unused kernel memory: 5120K
[ 5.949107] Checked W+X mappings: passed, no W+X pages found
[ 5.949155] Run /sbin/init as init process
[ 5.949159] with arguments:
[ 5.949161] /sbin/init
[ 5.949163] empty
[ 5.949165] with environment:
[ 5.949167] HOME=/
[ 5.949169] TERM=linux
[ 6.229044] EXT4-fs: Mount option(s) incompatible with ext2
[ 6.241510] EXT4-fs (sda3): mounted filesystem 28a1a436-d5e5-4a19-9f16-56d1272bb4b1 r/w with ordered data mode. Quota mode: none.
[ 6.783323] zram: Added device: zram1
[ 6.786587] zram1: detected capacity change from 0 to 16874968
[ 6.803809] Adding 8437480k swap on /dev/zram1. Priority:75 extents:1 across:8437480k SS
[ 6.850551] i2c_dev: i2c /dev entries driver
[ 11.750714] udevd[1041]: starting version 3.2.14
[ 11.767766] udevd[1042]: starting eudev-3.2.14
[ 11.885262] rpi-gpiomem fe200000.gpiomem: window base 0xfe200000 size 0x00001000
[ 11.885888] rpi-gpiomem fe200000.gpiomem: initialised 1 regions as /dev/gpiomem
[ 11.893449] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.895653] generic_raw_uart: loading out-of-tree module taints kernel.
[ 11.898829] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 11.898864] [vc_sm_connected_init]: start
[ 11.905174] [vc_sm_connected_init]: installed successfully
[ 11.905307] pl011_raw_uart fe201000.serial: there is not valid maps for state default
[ 11.906521] pl011_raw_uart fe201000.serial: Initialized pl011 device; mapbase=0xfe201000; irq=40; clockrate=48000001
[ 11.906602] pl011_raw_uart fe201000.serial: Missing I2C driver of rtc device, trying to load
[ 11.906606] pl011_raw_uart fe201000.serial: Requesting module i2c:rx8130
[ 11.924336] rtc-ds1307: probe of 1-0032 failed with error -5
[ 11.943324] rtc-ds1307: probe of 1-0032 failed with error -5
[ 11.945247] raw-uart raw-uart: Reset radio module
[ 11.954377] usb 1-1.4: Found eQ-3 HmIP-RFUSB with serial 3014F711A0000420C9A17A0A at usb-0000:01:00.0-1.4
[ 11.954598] raw-uart raw-uart1: Reset radio module
[ 11.954610] raw-uart raw-uart1: Registered new raw-uart device using underlying device eQ-3 HmIP-RFUSB@usb-0000:01:00.0-1.4.
[ 11.958175] usbcore: registered new interface driver hb_rf_usb_2
[ 11.982087] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.993337] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 11.993817] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 11.994276] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 11.994707] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 12.029889] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 12.038232] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 12.041352] usbcore: registered new interface driver brcmfmac
[ 12.124735] raw-uart raw-uart: Registered new raw-uart device using underlying device GPIO@fe201000.serial.
[ 12.252003] brcmfmac_wcc: brcmf_wcc_attach: executing
[ 12.257368] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 12.257820] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 12.402811] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 12.404846] bcmgenet fd580000.ethernet eth0: Link is Down
[ 16.485393] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 19.524070] warning: `ifplugd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 29.147295] raw-uart raw-uart: Reset radio module
[ 29.325156] raw-uart raw-uart1: Reset radio module
[ 31.340501] raw-uart raw-uart: Reset radio module
[ 49.517878] raw-uart raw-uart: Reset radio module
[ 49.707938] raw-uart raw-uart1: Reset radio module
[ 51.166172] raw-uart raw-uart1: Reset radio module
[ 51.712781] eq3loop: created slave mmd_hmip
[ 51.713226] eq3loop: created slave mmd_bidcos
[ 53.732549] eq3loop: eq3loop_open_slave() mmd_bidcos
[ 53.732593] eq3loop: eq3loop_close_slave() mmd_bidcos
[ 53.734724] eq3loop: eq3loop_open_slave() mmd_hmip
[ 53.734763] eq3loop: eq3loop_close_slave() mmd_hmip
[ 53.807440] eq3loop: eq3loop_open_slave() mmd_bidcos
[ 68.885802] eq3loop: eq3loop_open_slave() mmd_hmip
[ 68.885953] eq3loop: eq3loop_close_slave() mmd_hmip
[ 68.887925] eq3loop: eq3loop_open_slave() mmd_hmip
[ 68.888042] eq3loop: eq3loop_close_slave() mmd_hmip
[ 68.888515] eq3loop: eq3loop_open_slave() mmd_hmip
[ 68.888593] eq3loop: eq3loop_close_slave() mmd_hmip
[ 68.893599] eq3loop: eq3loop_open_slave() mmd_hmipEdit: sehe gerade das ich den Nightly mit Kernel 6.6.21 gebootet habe. Der bootete aber gestern ohne den Workaround auch nicht, kann also als "Problemlöser" ausgeschlossen werden. |
jens-maus
added
💻 hardware support
|
Ich sehe gerade im Changelog für die neue Version den Eintrag add kernel upstream patch to increase usb storgae quirks character limit to 256 characters so that the currently specified USB quirks string does not result in a kernel bootup error Betrifft das diesen meinen Bug? Hab leider gerade keine Zeit, das auszutesten und würde mich daher über eine kurze Bestätigung freuen :) |
Nein, denn dann wäre das Issue hier ja weiter bearbeitet oder eben als gefixt geschlossen worden. |
|
Mal so dahergedacht... Bei einer RM hat man doch generell einen geringen i/o da würde man doch kaum merken wenn das USB-Device mit "mass_storage" statt uas läuft. Bei HA-OS ist das was anderes, da hier ggf. hoher i/o für die Datenbanken gebraucht wird. |
Prinzipiell keine schlechte Idee. Die Frage wäre nur was das für mögliche Nebenwirkungen haben könnte. Das kann ich aktuell nicht/schwer überblicken. Aber versuchen könnte man es ggf. Muss ich mal schauen ob man UAS einfach durch wegnehmen von |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Describe the issue you are experiencing
Hallo,
ich nutze einen Pi4 mit USB-SSD Boot und der RPI-RF-Mod.
Heute habe ich von der 3.73.9.20240130 auf die 3.75.6.20240316 geupdated bzw. das versucht - leider erfolglos.
Nach dem "automatischen" Update hat das System nicht mehr gebootet. Hatte da leider noch keinen Monitor zur Hand, kann also zu Fehlermeldungen o.ä. leider nichts sagen.
Dann die 3.75.6 per Etcher auf die SSD geschrieben - das System hat nicht gebootet mit Meldung "Firmware not found".
Das habe ich dann mehrmals versucht mit immer gleichem Ergebnis.
Mit dem Raspberry Pi Imager übrigens gleiches Ergebnis.
Dann die 3.73.9 geflashed und das System hat wieder gebootet.
Backup eingespielt und das Update auf die 3.75.6 erneut probiert.
Das System hängt dann in einer Bootschleife. Ich habe davon ein Video gemacht: https://www.file-upload.net/download-15286506/PXL_20240319_1521190892.mp4.html
Aktuell läuft somit die 3.73.9 wieder problemlos und ich hoffe auf ein baldiges Update zur Problemlösung :)
Describe the behavior you expected
s.o.
Steps to reproduce the issue
s.o.
What is the version this bug report is based on?
3.75.6.2024031
Which base platform are you running?
rpi4 (RaspberryPi4, ARM64/aarch64)
Which HomeMatic/homematicIP radio module are you using?
RPI-RF-MOD
Anything in the logs that might be useful for us?
Additional information
No response
The text was updated successfully, but these errors were encountered: