New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
can not connect the libre3 #107
Comments
Status=133 is crossed out, thus it was a previous error and this error is just a momentary connection error that happens tens of times a day when the connection is very well. |
The Bluetooth chip on the sensor will be different and the communication over Bluetooth is totally different. |
I can use libre 2 with aaps and pod dash over 40 hrs. I have not only tested libre2 sensor yet. |
I sent the log file to you.please check it. |
Can you also give a trace.log of your phone so I can see what happens there. I know what did happen on another phone at the same point, but maybe your case is different. Did you turn off Bluetooth or "use Bluetooth" on your phone? The sensor hangs up a few times. Something it does when something happens to the sensor, like scanning or connecting with another device. |
I take the phone far away from the sensor and turn off the phone's power. The phone can not connect the sensor. I did not turn off Bluetooth or use Bluetooth on my phone.but libre2 connection is ok.there is no other device connect the sensor.I don't know how is the sensor,this situation also happened to my friend who did the same test as me. |
I resend my log to your email with phone and watch's log. |
I have a watch OPPO watch4 pro it's a standalone android 11 but no nfc.I install juggluco arm32 7.1.22 on my watch.
I use mirror to active the libre2 with my phone and send to my watch, It works fine without phone,only standalone.
When I use the libre3,It doesnt work. failure code =133.
The text was updated successfully, but these errors were encountered: