Skip to content

Latest commit

 

History

History
491 lines (354 loc) · 21.3 KB

README.md

File metadata and controls

491 lines (354 loc) · 21.3 KB

Contents

  • apt-clean: clean and simplify APT package state
  • bmount: mirror subtrees of a filesystem
  • extsync: sync subtrees between remote hosts
  • git-etc: track/restore system files and metadata
  • rsconf: simple backup framework for rsnapshot
  • luksblk: manage simple LUKS block devices
  • btsync: synchronise a file over bittorrent

Various ad-hoc tools for sysadmin/backup purposes.

I'll describe why I wrote my own rather than use existing ones as well :)


apt-clean

Simplify and clean up redundant or incorrect APT package state.

Over the lifetime of a Debian installation, the APT package state can become cluttered with redundant or "incorrect" (from a human point of view) state. This can interfere with its dependency resolution algorithms, which makes upgrading (both manual and automatic) much harder. See issues section for details.

Pre-use

Depends: aptitude, dialog, git

Use

Run as root and follow the instructions, which should be self-explanatory. It will save your answers into $PWD/apt-clean.txt, so make sure that is writable. This is a subset of your APT package state that is "interesting" from a human perspective. (This is somewhat subjective and based on about 5 years of me adminstrating various Debian systems; those familiar with the APT object model are welcome to read the source and file pull requests for improvements.)

The cleanup proceeds in rounds; each round consists of a series of steps, and the program will execute successive identical rounds until no changes are detected. Each step represents a type of installation profile (for lack of a better word), e.g. "automatically installed top-level packages". You are asked to identify the subset that intentionally belongs to that profile, as opposed to being an accidental by-product of the issues below. Pay attention to the instructions on how to achieve this; it encourages you to eliminate redundancy.

The first time you run this program, your APT state is likely to be very untidy and it will require the most effort to clean up. However, once you figure out the initial non-redunant clean state file, subsequent runs of this program will require much less effort to detect new redundancies or untidiness.

Note: if you terminate the program with ctrl-C, your terminal will probably be a bit screwed. Simply run reset (part of ncurses, which is a dependency of dialog) and it will go back to normal. Even if you can't see those characters, typing <ctrl-C> reset <enter> should hopefully work.

Issues

Issues with APT/aptitude:

  • Imperfect manual maintenance
    • If you are manually trying to resolve dependencies, it's very common to run "aptitude install A B C", where A B C are the dependencies of some target package T. However, this is actually incorrect, because these packages will be marked manual, meaning they will remain on the system even if no longer needed. This by itself may not seem like a big deal, but it interferes with future dependency resolution, because the algorithm will try to satisfy the constraints "do not remove A or B or C", which may be impossible and yet unnecessary, hence failing the resolution unnecessarily.
  • Subtle aptitude bugs or design flaws
    • The APT object model is very complex, e.g.
      • OR-dependencies and virtual packages means that "reverse depends" is not a well-defined concept (see e.g. bug #594237). Another side effect is that "aptitude remove X; aptitude install X;" in certain cases may not be a no-op, which is misleading and non-intuitive.
      • the ability for users to change at any time whether "automatically installed" should include Depends:, Recommends: or Suggests: relationships means you cannot be sure what "automatic" really means.
    • Because of this, it is not implausible that the dependency resolver algorithm makes different assumptions in different cases, which can result in undesired or (from a higher point of view) "inconsistent" package state.
    • There have been many bugs in APT/aptitude relating to "auto" flags being cleared en-masse or otherwise corrupted. There are too many to list; at the time of writing, a debian bugs search on aptitude for "auto" gave ~50 results, of with ~20 was relevant to this.

Dealing with these issues manually requires a deep understanding of the APT object model, and even then it's very tedious to remember which search patterns to use to do the job correctly. This tool aims to automate much of the process, by giving natural-language descriptions of these issues and instructions on how to proceed, and also puts your previous answers under version control both to avoid repetition and data corruption due to APT/aptitude bugs.

Terminology

In the explanation text, "top-level" refers to an installed package that is not predependant on / dependant on / recommended by another installed package, and "absolute top-level" refers to the subset of those that are additionally also not suggested by another installed package.


bmount

Mirror subtrees between different parts of the filesystem using bind-mounts.

Example use-cases:

  • you want to put specific parts of a server config under version control, but don't want to blanket-track everything under /etc. (see git-etc below for more functionality in this area.)
  • you want to store secrets in some secure medium, and temporarily link it to a location where it can be used (e.g. ~) but only when you need it.

Pre-use

Depends: python (>= 2.7), linux (>= 2.6.26)

Use

TODO

Related

Two similar tools exist already, but weren't suited to my purposes. However, they may be more suitable for what you need. (+) means an advantage compared to bmount; (-) means a disadvantage.

etckeeper:

  • (+) "fire and forget" - very little manual config needed to setup initially. however, restoring your backup later may not be so easy, due to the spam of unnecessary extra information (see next point).
  • (-) cannot handle arbitrary subtrees; tracks too many files (all of /etc) by default, with no simple way to ignore most of them
    • e.g. I really don't care about /etc/rc*.d, or /etc/ssl/certs, and I don't care about config changes due to package upgrades
    • trivial differences (e.g. different package versions) make it hard to compare systems that are otherwise identical in the important areas.
  • (-) only one repo that is permanently active and holds everything
  • git-etc provides some additional advantages over the git-specific parts of etckeeper; see below. bmount+git-etc is my take on etckeeper.

live-persist:

  • can handle arbitrary subtrees, like bmount
  • (+) is even more flexible in the types of mirror it can handle: bind-mounts, symlink trees, and different types of unionfs.
  • (-) can only read config from the root of a file system
  • (-) can only activate the mirror, not deactivate it. whilst active, cannot edit the config (e.g. adding new subtrees) and have it applied automatically onto the existing activation.
  • intended for use with the "live-boot" system by Debian, so a bit harder to install on a normal system

extsync

Synchronise subtrees between remote hosts using rsync.

Example use-cases:

  • you've got your own personal way of organising many packages and projects in a nice tidy filesystem tree under your home directory. you have multiple devices, and you'd like to maintain the identical nice tidy structure across all of them. however, you don't want to copy the entire tree to every device, but only the projects that you're working on at the current time.

Pre-use

Depends: rsync

Use

TODO

Related

After I wrote extsync, I found out about unison which works with the same idea of a "base tree" and allows the user to select subtrees of that to sync. The major difference is that it does a lot of prompting; sometimes you just want the tool to shut up and work. You can use this tool and unison on the same data though, depending on what you prefer at the time.


git-etc

Track and restore system files and metadata in git. Use together with bmount.

More advanced use case compared to etckeeper:

  • can put the repo somewhere other than /etc/.git
  • does not need to run as root (except when restoring). therefore, can split repo by security levels, e.g.:
    • public config in a repo owned by a normal user. you can share this with others for backup/review.
    • private config (e.g. passwords) in a repo owned by root

Pre-use

Depends: git, liblchown-perl

Use

TODO


rsconf

A backup framework on top of rsnapshot - which is flexible and powerful, but because of this, its config files are fairly complex to set up and understand.

Current restrictions - READ:

  • only backs up to local fs. This includes mounted remote resources (e.g. nfs, sshfs), but not non-fs resources even if rsnapshot supports it (e.g. ssh://)
  • only backs up files, not e.g. database dumps, but could be easily extended to

Features on top of rsnapshot:

  • provides sensible defaults for a large chunk of a typical rsnapshot config.
    • separates backup source config vs. rotation/schedule config. admins can focus on customising the former; developers can refine the latter for better reuse.
    • joins rsnapshot rotation times with crontab schedules, which unfortunately are separated in rsnapshot and annoying to keep consistent.
  • utility methods to automate more complex but important backup cases.
    • detects system config files customised by the user, and ignores files that are unchanged from installation.

Pre-use

Depends: rsnapshot (>= 1.3.1), debsums, dlocate

You may also need to patch rsnapshot:

  • if using upstream 1.3.1, you need to apply r401, r406
  • if using debian 1.3.1-1, you need to apply r401, r406
  • if using debian 1.3.1-2 or -3, you need to apply r406
  • if using debian 1.3.1-4, you can use this with no further patches

Use

Run rsconf to print a quick checklist for setting up a backup. It will give you a list of things to customise; please do so if necessary. If the help text in the default config files are unclear, you can read below for a more detailed explanation.

Each backup is stored in a directory $BACKUP_ROOT (we'll refer to this as ~) on the local filesystem. ~/backup.list defines the source files of the backup, and it also points to a scheme file which defines when a snapshot is made, how rotations work, when old snapshots are expired, etc (we'll refer to this as the rotation/schedule).

Both backup.list and *.scheme are divided up into "chapters" (delimited by ==) and "sections" (delimited by --). Each chapter defines a named backup target, stored in ~/[NAME]/. Each backup target effectively has its own rsnapshot config (which rsconf dynamically generates), including the rotation/schedule config.

The chapters in backup.list MUST match the ones in the scheme it points to.

Scheme files are intended to be distributed together with rsconf to save the user having to specify their own rotation/schedule (which is quite fiddly) but you can write your own as well if the ones provided really don't satisfy your needs. Currently scheme files are found in the /share/ subdirectory of the real path of rsconf, but this could be extended to be more easily customisable.

backup.list chapters

Each section has a heading (which is the method used to select files) and some content (usually a list) to apply to the method. See examples/backup.list for a list of all the methods and brief notes on what the content should be.

You can test the output of some content applied to a particular find-method by sending it to rsconf test_find_method [METHOD]. e.g.

$ echo /etc | rsconf test_find_method all
backup	/etc	$BACKUP_TARGET/

Note that $BACKUP_TARGET/ will be replaced by the actual backup target.

There is currently no support for adding and using your own methods, but I might accept a patch for it. However, I would prefer to add new methods to rsconf itself, rather than encourage users to implement their custom solutions. We are trying to save work and encourage reuse, after all.

scheme file chapters

There are two sections, RETAIN and CRONTAB.

RETAIN is what goes into the generated rsnapshot config - see the "retain" keyword in the rsnapshot manual for more details.

CRONTAB is what goes into your crontab, when you install your backup.list. $RS_CONF will automatically be set to the correct filename. The rsnapshot manual tells you how you set up your crontab entries to match your "retain" settings.

See 2tier.scheme for an example.


luksblk

A tool for managing simple LUKS block devices.

Current restrictions - READ:

  • the LUKS-formatted block device must contain exactly one normal (mountable) filesystem, and not some other abstraction like partition tables or LVM

Features on top of cryptsetup:

  • provides simple commands for common high-level operations
  • keeps metadata together at a pre-defined location so commands mostly take no arguments
  • additional helper commands for acting on a disk image file

Pre-use

Depends: cryptsetup

Use

Run luksblk for detailed help text. This should be enough to get you started.

Editing the crypto settings

If you need to edit the crypto settings, you'll need to re-backup the new LUKS header afterwards using the header subcommand.

Non-root read access

You probably want non-root read access to the LUKS-formatted block devices managed by this script - e.g. to use btsync to do remote backups. Read access is only to the encrypted form of the data, so there less potential for a leak.

You can create a single-purpose user for this, but you probably also need to give it access that persists across reboots. One way to do this is via udev. If your arrangement is quirky enough that online help isn't easily available, see examples/99-local-*.rules for some not-so-common use cases. In most cases, you probably want to set GROUP="<NON_ROOT_USER>" MODE="0640".

On a related note, luksblk itself tries to avoid using root privileges. It assumes it has read access to the block device, so you need to set up the above if you want to run this script not as root. It assumes that it needs root for write access and various other things such as cryptsetup and device access; these operations use sudo automatically.


btsync

Synchronise snapshots of a dynamic file to multiple peers over bittorrent.

The bittorrent protocol is transfer-efficient for in-place edits, but not insertions or deletions, i.e. iff Hamming distance is short, regardless of Levenshtein distance. This covers the primary design use case, where the "file" is a block device that holds a (maybe encrypted) filesystem. Typically, efficiency is maintained when you expand the filesystem, but not necessarily when you shrink it. Efficiency may also be lost when/if you defragment the filesystem, but this is a necessary cost.

On the other hand, if, for your use-case, Hamming distance is typically large but Levenshtein distance is small (e.g. ABCDEFGH -> ABXCDEFGH), rsync is more transfer-efficient between each sender/receiver pair, but the peer-to-peer nature of bittorrent may still give a quicker overall transfer time when the total number of peers is large - so run some tests if performance is an issue. (One way better than either of these, would be to use the rsync diff algorithm but have peer-to-peer transfers like bittorrent; but this seems very complex to achieve.)

Pre-use

Depends (origin node): bittornado (>= 4.0), python, ssh, (transmission-create | mktorrent), {peer node dependencies}

Depends (peer nodes): (transmission-daemon, transmission-remote, nc) | (rtorrent, screen, python, xmlrpc2scgi)

Manual patching (origin node only):

  • bttrack: use the version from bittornado's CVS
    • $ cvs -d:pserver:anonymous@cvs.degreez.net/cvsroot co bittornado && cd bittornado
    • bittornado$ for i in $THIS_GIT_REPO/patches/bttrack_*.patch; do patch -lp0 < "$i"; done
    • bittornado$ mkdir -p ~/bin && sed -e '1s/env python/python/g' bttrack.py > ~/bin/bttrack

If you plan to create torrents from block devices, you'll need to apply one of the following too, and rebuild+reinstall as appropriate (origin node only):

  • mktorrent: github fork
  • transmission-create: TODO send a patch to them for this

Other notes:

  • xmlrpc2scgi.py (DL) is included in this git repo for your convenience. btsync will automatically copy this to each peer, but you can optionally install it into the normal PATH of each peer (inc. origin), if you prefer not to keep binaries with your run-time data. You should install it with the .py extension; this is because it contains a -p option which is python-specific and I didn't want to make assumptions about any potential "xmlrpc2scgi" tool that might pop up in the future.

Use

Run btsync init until it stops complaining at you. It will give you a list of things to customise; please do so if necessary. If the help text in the default config files are unclear, you can read below for a more detailed explanation.

After everything is validated, run btsync dist <file> <snapshot label> each time you want to synchronise a snapshot. It is assumed that a label is newer than another if it appears later in sort order (which must be the same across all peers). Older labels are expired as appropriate, and re-used as initial data for a newer torrent.

You only ever run btsync on the origin host, although every peer, including the origin, needs to have a work_dir where btsync puts its run-time files. On the origin, this is given by the standard "current working directory", or the env var CWD if set. On the remote peers, this is read from remotes.txt in the origin work_dir. (This file is created automatically when you run btsync init enough times.) You need SSH access to each peer; see remotes.txt for details.

You also must customise bttrack.vars (origin host only) - see the operation section below for a more detailed explanation on what everything means, if the hints are unclear.

You also may want to customise btsync.vars on each peer. This is typically optional, but may be necessary for certain setups, e.g. if the firewall settings don't allow incoming traffic on arbitrary ports, which would prevent the default "random" port setting from working.

Operation

Each peer (including the origin node) runs a bittorrent client; the origin node additionally runs a HTTPS bittorrent tracker. The tracker treats knowledge of a torrent's info_hash as implicit authorisation to obtain data for that torrent. To protect the info_hash, each client only presents it to a tracker if its certificate is signed by your own CA cert, which is distributed out-of-band via SSH to the client as part of the normal operation of this tool (see below).

See this helpful article for a walkthrough on how to create your own CA cert and sign a domain certificate using it. TODO make this a script

The only reason we use SSL is because the bittorrent protocol currently doesn't support any other signature method for the tracker. Treat the tracker's SSL certificate like a GPG signature, and the CA cert like a GPG public/private key. In other words, the CA cert must be controlled by YOU, and you should not sign certificates for other people since they can use it to masquerade as you, for the purposes of this tool.

As a corollary, note that using an actual root CA cert completely voids these security properties, since anyone can get a certificate signed by a root CA for a price, and can then trick your clients into revealing the info_hash simply by doing MITM on the client-tracker connection.

NB: the security framework only supports one-CA-cert-per-client, meaning that all the torrents on that client must use the same tracker. One workaround is to use a different btsync work_dir for each distinct tracker you need to use. (This doesn't seem easy to fix, as there is no way to instruct "this tracker must be signed by this particular CA" on a per-torrent basis, only per-client.)

HTTPS reverse proxy

So far we've been talking about an HTTPS tracker. In actual fact, this tool currently uses bttrack which is HTTP only. Therefore you need to also set up an HTTPS reverse proxy to the bttrack process, which listens on the local interface only. Make sure the reverse proxy sets the X-Forwarded-For header correctly; most non-anonymising web servers do this.

See examples/bttrack.*.conf on how to configure various web servers to set up the reverse proxy.

You might also need to tweak the TRACKER_HACK variable in bttrack.vars. Due to this reverse proxy setup, --fallback_ip is likely necessary in most cases.