We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Tested on:
Step1: flash inav 7.0.0 with Full chip erase (no problem) Step 2 : after reboot, select "Airplane with a tail" or "Airplane with out a tail"
then the step of applying the defaults settings never ends:
I can cancel this task with the top white cross but I'm not able to know is any default parameter is missing or not
I can reproduce the problem without flashing, juste hit "reset settings" on the Setup page and the problem is the same
The text was updated successfully, but these errors were encountered:
This is similar to new issue described here: inav-configurator/issues/2090
Sorry, something went wrong.
No branches or pull requests
Tested on:
Step1: flash inav 7.0.0 with Full chip erase (no problem)
Step 2 : after reboot, select "Airplane with a tail" or "Airplane with out a tail"
then the step of applying the defaults settings never ends:
I can cancel this task with the top white cross but I'm not able to know is any default parameter is missing or not
I can reproduce the problem without flashing, juste hit "reset settings" on the Setup page and the problem is the same
The text was updated successfully, but these errors were encountered: