New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
No sound on Core 2024.5.2 #3594
Comments
Hello, I have the same problem with VLC with Best regards |
Hi, Core 2024.5.3 Not sure if this is helpful... Thanks. |
Hello, I'm facing a similar issue here starting from the May release. Here's the details of my HA setup: Core: 2024.5.3 My VLC Add-On problematic logs look similar to what posted by danielbanfi47:
And here's the debug output of my VLC-Telnet integration:
|
Hello, I had the same problem with VLC-TELNET after the last updates. Core 2024.5.2 After backup to Core 2024.5.1 the problem was still there. From CLI: ha os boot-slot other Now everything worked as it should again, and so I skiped the update to 12.3 Good luck |
Hi macinalycan, I can confirm that OS 12.3 seems to have caused this. Thanks, |
Never mind, as I've not found any, I've just raised one now: |
This comment was marked as off-topic.
This comment was marked as off-topic.
VLC works here but... |
Describe the issue you are experiencing
After I updated to the following:
Core 2024.5.2
Supervisor 2024.05.1
Operating System 12.3
The VLC doesn't give any sound (before the update it worked fine). I restarted the whole system, but the issue is the same.
VLC log:
[0000007f86ba9020] main interface error: no suitable interface module
[0000007f86ccbb30] main libvlc error: interface "globalhotkeys,none" initialization failed
[0000007f86bc0790] main playlist: playlist is empty
[0000007f86b82d50] [telnet] lua interface: Listening on host "telnet://:4212".
[0000007f86ba9380] [http] lua interface: Lua HTTP interface
What type of installation are you running?
Home Assistant OS
Which operating system are you running on?
Home Assistant Operating System
Which add-on are you reporting an issue with?
VLC
What is the version of the add-on?
0.3.0
Steps to reproduce the issue
Sounds triggered by the automation does not play
System Health information
System Information
Home Assistant Community Store
Home Assistant Cloud
Home Assistant Supervisor
Dashboards
Recorder
Anything in the Supervisor logs that might be useful for us?
Anything in the add-on logs that might be useful for us?
Additional information
Audio log:
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
cont-init: info: running /etc/cont-init.d/filesystem.sh
cont-init: info: /etc/cont-init.d/filesystem.sh exited 0
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service alsa: starting
s6-rc: info: service alsa successfully started
s6-rc: info: service alsa-init: starting
[17:04:44] INFO: �[32mAdjust ALSA mixer settings for /dev/snd/controlC0�[0m
s6-rc: info: service alsa-init successfully started
s6-rc: info: service pulseaudio: starting
W: [pulseaudio] main.c: Running in system mode, but --disallow-module-loading not set.
W: [pulseaudio] main.c: Home directory of user 'root' is not '/var/run/pulse', ignoring.
W: [pulseaudio] caps.c: Normally all extra capabilities would be dropped now, but that's impossible because PulseAudio was built without capabilities support.
W: [pulseaudio] main.c: OK, so you are running PA in system mode. Please make sure that you actually do want to do that.
W: [pulseaudio] main.c: Please read http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/WhatIsWrongWithSystemWide/ for an explanation why system mode is usually a bad idea.
W: [pulseaudio] module-udev-detect.c: Failed to open /proc/asound/card0: No such file or directory
s6-rc: info: service pulseaudio successfully started
s6-rc: info: service legacy-services: starting
s6-rc: info: service legacy-services successfully started
E: [alsa-sink-bcm2835 Headphones] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write.
E: [alsa-sink-bcm2835 Headphones] alsa-sink.c: Most likely this is a bug in the ALSA driver 'snd_bcm2835'. Please report this issue to the ALSA developers.
E: [alsa-sink-bcm2835 Headphones] alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail.
s6-rc: info: service legacy-services: stopping
s6-rc: info: service legacy-services successfully stopped
s6-rc: info: service pulseaudio: stopping
[18:10:38] INFO: �[32mService restart after closing�[0m
s6-rc: info: service pulseaudio successfully stopped
s6-rc: info: service alsa-init: stopping
s6-rc: info: service alsa-init successfully stopped
s6-rc: info: service alsa: stopping
s6-rc: info: service alsa successfully stopped
s6-rc: info: service legacy-cont-init: stopping
s6-rc: info: service legacy-cont-init successfully stopped
s6-rc: info: service fix-attrs: stopping
s6-rc: info: service fix-attrs successfully stopped
s6-rc: info: service s6rc-oneshot-runner: stopping
s6-rc: info: service s6rc-oneshot-runner successfully stopped
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
cont-init: info: running /etc/cont-init.d/filesystem.sh
cont-init: info: /etc/cont-init.d/filesystem.sh exited 0
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service alsa: starting
s6-rc: info: service alsa successfully started
s6-rc: info: service alsa-init: starting
[20:11:50] INFO: �[32mAdjust ALSA mixer settings for /dev/snd/controlC0�[0m
s6-rc: info: service alsa-init successfully started
s6-rc: info: service pulseaudio: starting
W: [pulseaudio] main.c: Running in system mode, but --disallow-module-loading not set.
W: [pulseaudio] main.c: Home directory of user 'root' is not '/var/run/pulse', ignoring.
W: [pulseaudio] caps.c: Normally all extra capabilities would be dropped now, but that's impossible because PulseAudio was built without capabilities support.
W: [pulseaudio] main.c: OK, so you are running PA in system mode. Please make sure that you actually do want to do that.
W: [pulseaudio] main.c: Please read http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/WhatIsWrongWithSystemWide/ for an explanation why system mode is usually a bad idea.
W: [pulseaudio] module-udev-detect.c: Failed to open /proc/asound/card0: No such file or directory
s6-rc: info: service pulseaudio successfully started
s6-rc: info: service legacy-services: starting
s6-rc: info: service legacy-services successfully started
E: [alsa-sink-bcm2835 Headphones] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write.
E: [alsa-sink-bcm2835 Headphones] alsa-sink.c: Most likely this is a bug in the ALSA driver 'snd_bcm2835'. Please report this issue to the ALSA developers.
E: [alsa-sink-bcm2835 Headphones] alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail.
The text was updated successfully, but these errors were encountered: