/
u-boot-2022.04-nas220.diff
249 lines (238 loc) · 6.45 KB
/
u-boot-2022.04-nas220.diff
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
diff --git a/board/Seagate/nas220/MAINTAINERS b/board/Seagate/nas220/MAINTAINERS
index f2df7ea64f..6033f93cf4 100644
--- a/board/Seagate/nas220/MAINTAINERS
+++ b/board/Seagate/nas220/MAINTAINERS
@@ -4,3 +4,4 @@ S: Maintained
F: board/Seagate/nas220/
F: include/configs/nas220.h
F: configs/nas220_defconfig
+F: arch/arm/dts/kirkwood-blackarmor-nas220.dts
diff --git a/board/Seagate/nas220/nas220.c b/board/Seagate/nas220/nas220.c
index cd2bbdad1c..fdbf321ff9 100644
--- a/board/Seagate/nas220/nas220.c
+++ b/board/Seagate/nas220/nas220.c
@@ -10,17 +10,22 @@
#include <common.h>
#include <init.h>
-#include <miiphy.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <asm/mach-types.h>
+#include <netdev.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <asm/arch/mpp.h>
-#include <asm/arch/cpu.h>
-#include <asm/io.h>
+#include <asm/global_data.h>
+#include <asm/mach-types.h>
+#include <linux/bitops.h>
DECLARE_GLOBAL_DATA_PTR;
+/* blue power led, board power, sata0, sata1 */
+#define NAS220_GE_OE_LOW (~(BIT(12) | BIT(14) | BIT(24) | BIT(28)))
+#define NAS220_GE_OE_HIGH (~(0))
+#define NAS220_GE_OE_VAL_LOW (BIT(12) | BIT(14) | BIT(24) | BIT(28))
+#define NAS220_GE_OE_VAL_HIGH (0)
+
int board_early_init_f(void)
{
/*
@@ -43,9 +48,9 @@ int board_early_init_f(void)
MPP9_TW_SCK,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
- MPP12_GPO,
+ MPP12_GPO, /* blue power led */
MPP13_GPIO,
- MPP14_GPIO,
+ MPP14_GPIO, /* board power */
MPP15_SATA0_ACTn,
MPP16_SATA1_ACTn,
MPP17_SATA0_PRESENTn,
@@ -55,12 +60,12 @@ int board_early_init_f(void)
MPP21_GPIO,
MPP22_GPIO,
MPP23_GPIO,
- MPP24_GPIO,
+ MPP24_GPIO, /* sata0 power */
MPP25_GPIO,
- MPP26_GPIO,
+ MPP26_GPIO, /* power button */
MPP27_GPIO,
- MPP28_GPIO,
- MPP29_GPIO,
+ MPP28_GPIO, /* sata1 power */
+ MPP29_GPIO, /* reset button */
MPP30_GPIO,
MPP31_GPIO,
MPP32_GPIO,
@@ -73,6 +78,11 @@ int board_early_init_f(void)
return 0;
}
+int board_eth_init(struct bd_info *bis)
+{
+ return cpu_eth_init(bis);
+}
+
int board_init(void)
{
/*
@@ -85,37 +95,3 @@ int board_init(void)
return 0;
}
-
-#ifdef CONFIG_RESET_PHY_R
-/* Configure and enable MV88E1116 PHY */
-void reset_phy(void)
-{
- u16 reg;
- u16 devadr;
- char *name = "egiga0";
-
- if (miiphy_set_current_dev(name))
- return;
-
- /* command to read PHY dev address */
- if (miiphy_read(name, 0xEE, 0xEE, (u16 *)&devadr)) {
- printf("Err..%s could not read PHY dev address\n", __func__);
- return;
- }
-
- /*
- * Enable RGMII delay on Tx and Rx for CPU port
- * Ref: sec 4.7.2 of chip datasheet
- */
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
- miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®);
- reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
- miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
-
- /* reset the phy */
- miiphy_reset(name, devadr);
-
- printf("88E1116 Initialized on %s\n", name);
-}
-#endif /* CONFIG_RESET_PHY_R */
diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig
index f6a1dcbee0..a078a7b751 100644
--- a/configs/nas220_defconfig
+++ b/configs/nas220_defconfig
@@ -3,12 +3,16 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
+CONFIG_SUPPORT_PASSING_ATAGS=y
+CONFIG_CMDLINE_TAG=y
+CONFIG_INITRD_TAG=y
CONFIG_SYS_KWD_CONFIG="board/Seagate/nas220/kwbimage.cfg"
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_NAS220=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0xA0000
+CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-blackarmor-nas220"
CONFIG_IDENT_STRING="\nNAS 220"
# CONFIG_SYS_MALLOC_F is not set
@@ -19,9 +23,11 @@ CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="nas220> "
+CONFIG_CMD_DM=y
# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_IDE=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_NAND=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
@@ -32,6 +38,7 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xa0000@0x0(uboot),0x010000@0xa0000(env),0x500000@0xc0000(uimage),0x1a40000@0x5c0000(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
@@ -42,14 +49,15 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
-CONFIG_SYS_ATA_STRIDE=4
-CONFIG_SYS_ATA_DATA_OFFSET=0x100
-CONFIG_SYS_ATA_REG_OFFSET=0x100
-CONFIG_SYS_ATA_ALT_OFFSET=0x100
+CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
+CONFIG_DM_GPIO_LOOKUP_LABEL=y
CONFIG_KIRKWOOD_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_PHY_MARVELL=y
+CONFIG_DM_ETH=y
CONFIG_MVGBE=y
CONFIG_MII=y
CONFIG_DM_RTC=y
diff --git a/include/configs/nas220.h b/include/configs/nas220.h
index 815f81f649..4c20245e5f 100644
--- a/include/configs/nas220.h
+++ b/include/configs/nas220.h
@@ -11,50 +11,37 @@
#ifndef _CONFIG_NAS220_H
#define _CONFIG_NAS220_H
-/* power-on led, regulator, sata0, sata1 */
-#define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
-#define NAS220_GE_OE_VAL_HIGH (0)
-#define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
-#define NAS220_GE_OE_HIGH (~(0))
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG 10
-#define MV88E1116_CPRSP_CR3_REG 21
-#define MV88E1116_MAC_CTRL_REG 21
-#define MV88E1116_PGADR_REG 22
-#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
-
-#include "mv-common.h"
-
/*
- * Environment variables configurations
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
*/
+#include "mv-common.h"
+
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=console=ttyS0,115200\0" \
- "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
- "0x010000@0xa0000(env),"\
- "0x500000@0xc0000(uimage),"\
- "0x1a40000@0x5c0000(rootfs)\0" \
"mtdids=nand0=orion_nand\0"\
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
"autostart=no\0"\
"autoload=no\0"
/*
* Ethernet Driver configuration
*/
-#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 8
-#endif /* CONFIG_CMD_NET */
+#ifdef CONFIG_RESET_PHY_R
+#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */
+#endif
/*
- * EFI partition
+ * SATA driver configuration
*/
+#define CONFIG_LBA48
+#define CONFIG_SYS_64BIT_LBA
#endif /* _CONFIG_NAS220_H */