Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Build errors for dynamic module on Ubuntu 20.04 on Raspeberry Pi 4 ARM. #164

Open
Danrancan opened this issue Feb 19, 2024 · 3 comments
Open

Build errors for dynamic module on Ubuntu 20.04 on Raspeberry Pi 4 ARM. #164

Danrancan opened this issue Feb 19, 2024 · 3 comments

Comments

@Danrancan
Copy link

Danrancan commented Feb 19, 2024 •
edited

I am trying to build the Brotli modules on Ubuntu 20.04 on a Raspberry Pi 4. I tried building with the master and the RC1, but em encountering the same errors. Below is the error I am encountering:

sudo make modules
make -f objs/Makefile modules
make[1]: Entering directory '/usr/local/src/nginx-1.25.4'
cc -c -fPIC -pipe  -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g  -Wno-deprecated-declarations -I src/core -I src/event -I src/event/modules -I src/event/quic -I src/os/unix -I /usr/local/src/ngx_brotli/deps/brotli/c/include -I objs -I src/http -I src/http/modules \
	-o objs/addon/filter/ngx_http_brotli_filter_module.o \
	/usr/local/src/ngx_brotli/filter/ngx_http_brotli_filter_module.c
cc -c -fPIC -pipe  -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g  -Wno-deprecated-declarations -I src/core -I src/event -I src/event/modules -I src/event/quic -I src/os/unix -I /usr/local/src/ngx_brotli/deps/brotli/c/include -I objs -I src/http -I src/http/modules \
	-o objs/ngx_http_brotli_filter_module_modules.o \
	objs/ngx_http_brotli_filter_module_modules.c
cc -o objs/ngx_http_brotli_filter_module.so \
objs/addon/filter/ngx_http_brotli_filter_module.o \
objs/ngx_http_brotli_filter_module_modules.o \
-L/usr/local/src/ngx_brotli/deps/brotli/c/../out -lbrotlienc -lbrotlicommon -lm \
-shared
/usr/bin/ld: cannot find -lbrotlienc
/usr/bin/ld: cannot find -lbrotlicommon
collect2: error: ld returned 1 exit status
make[1]: *** [objs/Makefile:1219: objs/ngx_http_brotli_filter_module.so] Error 1
make[1]: Leaving directory '/usr/local/src/nginx-1.25.4'
make: *** [Makefile:16: modules] Error 2

What can I do to make this work on a raspberry pi 4 running ubuntu 20.04 server?
@hieuhtr
Copy link

hieuhtr commented Feb 23, 2024

Document's a little bit confused. You need to build dependencies first.

git clone --recurse-submodules -j8 https://github.com/google/ngx_brotli
cd ngx_brotli/deps/brotli
mkdir out && cd out
cmake -DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=OFF -DCMAKE_C_FLAGS="-Ofast -m64 -march=native -mtune=native -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_CXX_FLAGS="-Ofast -m64 -march=native -mtune=native -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_INSTALL_PREFIX=./installed ..
cmake --build . --config Release --target brotlienc
cd ../../../..

after that, you will have brotlienc & brotlicommon

Then continue to compile statically or dynamically based on your need

Static

$ cd nginx-1.x.x
$ export CFLAGS="-m64 -march=native -mtune=native -Ofast -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections"
$ export LDFLAGS="-m64 -Wl,-s -Wl,-Bsymbolic -Wl,--gc-sections"
$ ./configure --add-module=/path/to/ngx_brotli
$ make && make install

Dynamic load

$ cd nginx-1.x.x
$ ./configure --with-compat --add-dynamic-module=/path/to/ngx_brotli
$ make modules

@Danrancan
Copy link
Author

Danrancan commented Feb 26, 2024 •
edited

I'm getting compile errors. Looks like -m64 is an invalid option. Any advice?

cmake -DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=OFF -DCMAKE_C_FLAGS="-Ofast -m64 -march=native -mtune=native -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_CXX_FLAGS="-Ofast -m64 -march=native -mtune=native -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_INSTALL_PREFIX=./installed ..

-- The C compiler identification is GNU 9.4.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- broken
CMake Error at /usr/share/cmake-3.16/Modules/CMakeTestCCompiler.cmake:60 (message):
  The C compiler

    "/usr/bin/cc"

  is not able to compile a simple test program.

  It fails with the following output:

    Change Dir: /usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeTmp

    Run Build Command(s):/usr/bin/make cmTC_1bb78/fast && /usr/bin/make -f CMakeFiles/cmTC_1bb78.dir/build.make CMakeFiles/cmTC_1bb78.dir/build
    make[1]: Entering directory '/usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeTmp'
    Building C object CMakeFiles/cmTC_1bb78.dir/testCCompiler.c.o
    /usr/bin/cc   -Ofast -m64 -march=native -mtune=native -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections    -o CMakeFiles/cmTC_1bb78.dir/testCCompiler.c.o   -c /usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeTmp/testCCompiler.c
    cc: error: unrecognized command line option ‘-m64’
    make[1]: *** [CMakeFiles/cmTC_1bb78.dir/build.make:66: CMakeFiles/cmTC_1bb78.dir/testCCompiler.c.o] Error 1
    make[1]: Leaving directory '/usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeTmp'
    make: *** [Makefile:121: cmTC_1bb78/fast] Error 2

  CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
  CMakeLists.txt:11 (project)

-- Configuring incomplete, errors occurred!
See also "/usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeOutput.log".
See also "/usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeError.log".

Okay, I tried now with the -march=armv8-a option, and deleted the -m64 options since I believe cmake automatically includes the -my 64 option since I'm running an arm64 OS. Here is the output, which still gives a warning:

cmake -DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=OFF -DCMAKE_C_FLAGS="-Ofast -march=armv8-a -mtune=native -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_CXX_FLAGS="-Ofast -march=armv8-a -mtune=native -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_INSTALL_PREFIX=./installed ..
-- The C compiler identification is GNU 9.4.0
-- Check for working C compiler: /usr/bin/cc

-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Build type is 'Release'
-- Performing Test BROTLI_EMSCRIPTEN
-- Performing Test BROTLI_EMSCRIPTEN - Failed
-- Compiler is not EMSCRIPTEN
-- Looking for log2
-- Looking for log2 - not found
-- Looking for log2
-- Looking for log2 - found
-- Configuring done
-- Generating done
CMake Warning:
  Manually-specified variables were not used by the project:

    CMAKE_CXX_FLAGS

Looks like the command works, but should I be worried about this warning? Do I need the manually specified variables? What can I do here?

NEXT: I tried with the following command:

cmake -DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=OFF -DCMAKE_C_FLAGS="-Ofast -march=armv8-a -mtune=native -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_CXX_FLAGS="-Ofast -march=armv8-a -mtune=native -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_INSTALL_PREFIX=./installed ..
-- The C compiler identification is GNU 9.4.0
-- Check for working C compiler: /usr/bin/cc

-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Build type is 'Release'
-- Performing Test BROTLI_EMSCRIPTEN
-- Performing Test BROTLI_EMSCRIPTEN - Failed
-- Compiler is not EMSCRIPTEN
-- Looking for log2
-- Looking for log2 - not found
-- Looking for log2
-- Looking for log2 - found
-- Configuring done
-- Generating done
CMake Warning:
  Manually-specified variables were not used by the project:

    CMAKE_CXX_FLAGS

-- Build files have been written to: /usr/local/src/ngx_brotli/deps/brotli/out

This shows two errors/warnings:

  1. -- Performing Test BROTLI_EMSCRIPTEN - Failed
    Q: How do I get BROTLI EMSCRIPTEN to work?
  2. Manually-specified variables were not used by the project: CMAKE_CXX_FLAGS

NEXT I tried the following command (notice I changed -mtune to -mtune=armv8-a):

cmake -DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=OFF -DCMAKE_C_FLAGS="-Ofast -march=armv8-a -mtune=armv8-a -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_CXX_FLAGS="-Ofast -march=armv8-a -mtune=armv8-a -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_INSTALL_PREFIX=./installed ..
-- Build type is 'Release'
-- Compiler is not EMSCRIPTEN
-- Configuring done
-- Generating done
CMake Warning:
  Manually-specified variables were not used by the project:

    CMAKE_CXX_FLAGS

-- Build files have been written to: /usr/local/src/ngx_brotli/deps/brotli/out

Which DID NOT show EMSCRIPTION errors, but DID show "Manually-specified variables were not used by the project: CMAKE_CXX_FLAGS".

NEXT, I tried the same command again, to yield different results:

cmake -DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=OFF -DCMAKE_C_FLAGS="-Ofast -march=armv8-a -mtune=armv8-a -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_CXX_FLAGS="-Ofast -march=armv8-a -mtune=armv8-a -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_INSTALL_PREFIX=./installed ..
-- The C compiler identification is GNU 9.4.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- broken
CMake Error at /usr/share/cmake-3.16/Modules/CMakeTestCCompiler.cmake:60 (message):
  The C compiler

    "/usr/bin/cc"

  is not able to compile a simple test program.

  It fails with the following output:

    Change Dir: /usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeTmp

    Run Build Command(s):/usr/bin/make cmTC_e8cf3/fast && /usr/bin/make -f CMakeFiles/cmTC_e8cf3.dir/build.make CMakeFiles/cmTC_e8cf3.dir/build
    make[1]: Entering directory '/usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeTmp'
    Building C object CMakeFiles/cmTC_e8cf3.dir/testCCompiler.c.o
    /usr/bin/cc   -Ofast -march=armv8-a -mtune=armv8-a -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections    -o CMakeFiles/cmTC_e8cf3.dir/testCCompiler.c.o   -c /usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeTmp/testCCompiler.c
    cc1: error: unknown value ‘armv8-a’ for ‘-mtune’
    cc1: note: valid arguments are: cortex-a35 cortex-a53 cortex-a57 cortex-a72 cortex-a73 thunderx thunderxt88p1 thunderxt88 octeontx octeontx81 octeontx83 thunderxt81 thunderxt83 emag xgene1 falkor qdf24xx exynos-m1 phecda thunderx2t99p1 vulcan thunderx2t99 cortex-a55 cortex-a75 cortex-a76 ares neoverse-n1 neoverse-e1 a64fx tsv110 zeus neoverse-v1 saphira neoverse-n2 cortex-a57.cortex-a53 cortex-a72.cortex-a53 cortex-a73.cortex-a35 cortex-a73.cortex-a53 cortex-a75.cortex-a55 cortex-a76.cortex-a55 generic
    make[1]: *** [CMakeFiles/cmTC_e8cf3.dir/build.make:66: CMakeFiles/cmTC_e8cf3.dir/testCCompiler.c.o] Error 1
    make[1]: Leaving directory '/usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeTmp'
    make: *** [Makefile:121: cmTC_e8cf3/fast] Error 2

  CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
  CMakeLists.txt:11 (project)

-- Configuring incomplete, errors occurred!
See also "/usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeOutput.log".
See also "/usr/local/src/ngx_brotli/deps/brotli/out/CMakeFiles/CMakeError.log".

NEXT I MADE changes to -mtune (-mtune=cortex-a72) and tried the following command:

cmake -DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=OFF -DCMAKE_C_FLAGS="-Ofast -march=armv8-a -mtune=cortex-a72 -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_CXX_FLAGS="-Ofast -march=armv8-a -mtune=cortex-a72 -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_INSTALL_PREFIX=./installed ..
-- The C compiler identification is GNU 9.4.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Build type is 'Release'
-- Performing Test BROTLI_EMSCRIPTEN
-- Performing Test BROTLI_EMSCRIPTEN - Failed
-- Compiler is not EMSCRIPTEN
-- Looking for log2
-- Looking for log2 - not found
-- Looking for log2
-- Looking for log2 - found
-- Configuring done
-- Generating done
CMake Warning:
  Manually-specified variables were not used by the project:

    CMAKE_CXX_FLAGS

-- Build files have been written to: /usr/local/src/ngx_brotli/deps/brotli/out

THEN, I tried the exact same command a second time which yielded different results:

cmake -DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=OFF -DCMAKE_C_FLAGS="-Ofast -march=armv8-a -mtune=cortex-a72 -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_CXX_FLAGS="-Ofast -march=armv8-a -mtune=cortex-a72 -flto -funroll-loops -ffunction-sections -fdata-sections -Wl,--gc-sections" -DCMAKE_INSTALL_PREFIX=./installed ..
-- Build type is 'Release'
-- Compiler is not EMSCRIPTEN
-- Configuring done
-- Generating done
-- Build files have been written to: /usr/local/src/ngx_brotli/deps/brotli/out

As you can see, running the cmake command twice with the -mtune=coretx-a72 and -march=armv8-a options, yields results without any problems except that "Compiler is not EMSCRIPTEN". So I am going with using this last command twice and proceeding hoping that this is the right way of doing things.

I must ask:

  1. Can you verify that this last command is correct?
  2. And why must I issue the last command twice for it to pick up and read the manually specified variables?
  3. How can I get the compiler to be "EMSCRIPTEN", and what are the benefits of doing so?
    Is that right or...?

Finally:

after that, you will have brotlienc & brotlicommon
The only thing I see in ngx_brotli/deps/ folder is the brotli folder i.e. ngx_brotli/deps/brotli. I do not see a ngx_brotli/deps/brotlicommon folder.

  1. Where should brotlicommon be located?

Thanks!

@Danrancan
Copy link
Author

Any word from the dev's on if I am doing this correctly or not? Let me know.

@kdelchev kdelchev mentioned this issue Apr 24, 2024
Open
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@hieuhtr @Danrancan