Smart BMS JK-PB2A16S-20P extra settings required

[silviudc]

Is the Smart BMS JK-PB2A16S-20P with Active Balancer supported by this integration? This is the new model that talks to inverters.
https://www.jkbms.com/product/jk-pb2a16s20p-jk-pb2a16s-20p/

[fl4p]

It might work. Let me know if you try it. There is no risk of harm.

[silviudc]

I have it ordered, will report back once I try it :)

[silviudc]

Just to confirm that it works but I see the following only:

Would it be possible to add/update the following:

1. Would like to see toggle buttons for balance and float mode, like for charge/discharge
2. Temp sensors 3 and 4 are missing, only 1 and 2 showing

JKBMS FW is v14.17

[at906]

Just to confirm that it works but I see the following only: Would it be possible to add/update the following:

1. Would like to see toggle buttons for balance and float mode, like for charge/discharge
2. Temp sensors 3 and 4 are missing, only 1 and 2 showing

JKBMS FW is v14.17

Hello,

Can you walk me through this setup? MQTT Broker finds the BMS(3), but i am not able to populate any of the info

[fl4p]

I've added the other 2 temperature sensors.

@silviudc What is float mode? Can you post a screenshot of the app screen with that button?

[Off-Grid-Garage]

@fl4p It's called Vol. Cell RFV(V) in the app: RFV = requested float voltage
2nd from the top:

There is a Function Switch for it on the 3rd screen of the app to toggle this function: