Ansi Terminal Request: _GVIDMODE command for changing video modes

[eightbitswide]

Could a _GVIDMODE num $ be added for changing the video resolution/color?

"1280x768, B&W", // 0
"1024x720, 4 Colors", // 1
"800x600, 8 Colors", // 2
"720x520, 16 Colors", // 3
"640x480 73Hz, 16 C.", // 4
"640x480 60Hz, 16 C.", // 5
"640x350, 16 Colors", // 6
"512x384, 64 Colors", // 7
"400x300, 64 Colors", // 8

[eightbitswide]

Cancel this request. I was reading all the terminal code in the library, before I completely read the entirety of the AnsiTerminal code. Looking for the answer in the guts of the code, when it was staring me in the face the whole time.

[toml12953]

I'm not a C programmer. How would I set resolutions using escape codes from BASIC?

[johngalt01]

10 PRINT CHR$(27) +"_#512x384x64$"

// Usable options:
// "1280x768x2","1024x720x4","800x600x8","720x520x16","640x480@73x16"
// "640x480@60x16","640x350x16","512x384x64","400x300x64"

[toml12953]

According to the source code, you need an R in the command: // 'R': change resolution (for example: ESC + "_#R512x384x64$") So wouldn’t the command be 10 PRINT CHR$(27) +"_#R512x384x64$" From: johngalt01 ***@***.***> Sent: Saturday, January 7, 2023 10:53 AM To: fdivitto/FabGL ***@***.***> Cc: toml12953 ***@***.***>; Comment ***@***.***> Subject: Re: [fdivitto/FabGL] Ansi Terminal Request: _GVIDMODE command for changing video modes (Discussion #284) 10 PRINT CHR$(27) +"_#512x384x64$" // Usable options: // ***@***.***" // ***@***.***","640x350x16","512x384x64","400x300x64" — Reply to this email directly, view it on GitHub <#284 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABO3M3U6XLFWCK447GEETHDWRGGN3ANCNFSM6AAAAAARNFAH7I> . You are receiving this because you commented. <https://github.com/notifications/beacon/ABO3M3VOJUX6XAWIKC6IAP3WRGGN3A5CNFSM6AAAAAARNFAH7KWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAI2ABC.gif> Message ID: ***@***.*** ***@***.***> >