Skip to content

Latest commit

 

History

History
672 lines (405 loc) · 24.4 KB

CHANGELOG.md

File metadata and controls

672 lines (405 loc) · 24.4 KB
Raw

3.3.2

Bug Fixes

  • Issue #365 - Bulkhead policy may drop requests when maxWaitTime is specified.

3.3.1

Improevments

  • Issue #358 - Added full java module descriptors to Failsafe jars.
  • Issue #361 - Released execution references inside Failsafe provided CompletableFutures.

3.3.0

API Changes

  • ExecutionContext.getStartTime now returns a Instant rather than Duration, and ExecutionEvent.getStartTime now returns Optional<Instant>.
  • getFailure, getLastFailure, recordFailure and similar methods for recording Exceptions, which were previously deprecated, were removed. Use getException, getLastException, recordException, etc. instead.

3.2.4

Improvements

  • Added additional thread safety checks.

3.2.3

Bug Fixes

  • Fixed an issue where Timeouts would not fire under certain conditions when used outside a RetryPolicy.

3.2.2

Improvements

  • Released OkHttp module.
  • Released Retrofit module.
  • Added Call support to FailsafeExecutor, which can cancel synchrnous calls.
  • Added onCancel callback to ExecutionContext, which can propagate cancellations.

SPI Changes

  • SyncExecutionInternal.isInterruptable() and .setInterrupted were removed and .interrupt() was added instead to simplify performing an interruption.

3.2.1

Improvements

  • Issue #326 - Added support for reserving a RateLimiter permit with a wait time.

API Changes

  • Deprecated ExecutionContext.getLastFailure, Execution.recordFailure and similar methods throughout that API that refer to exceptions as failures. In their place, new methods have been added, such as getLastException, recordException and so on. This clarifies the difference between an exception and a failure, since an exception may or may not be a failure, depending on the policy configuration.
  • Changed the policy builders to use CheckedPredicate and CheckedBiPredicate instead of Predicate and BiPredicate, allowing exceptions to be thrown which are ignored.

3.2.0

Improvements

  • Issue #309 - Introduced a Bulkhead policy.
  • Issue #318 - Add non-blocking async waiting for rate limiters.

SPI Changes

  • PolicyExecutor.preExecuteAsync was introduced to support async pre-execution. This is backwards compatible with preExecute.

3.1.0

Improvements

  • Issue #308 - Introduced a RateLimiter policy.

3.0.2

Bug Fixes

  • Issue #311 - with(Executor) not working as expected in some cases.

3.0.1

Improvements

  • Issue #310 - Added .builder(PolicyConfig) methods to each of the policy interfaces, to allow new policies to be built from existing config.
  • Issue #251 - Relaxed the illegal state validation in RetryPolicyBuilder to allow different types of delays to be configured, replacing previous configuration. Also removed the requirement that a jitter duration be configured after a delay.

Bug Fixes

  • Issue #215 - Added overflow checking for large user-provided Duration values.

3.0

API Changes

This release introduces some breaking changes to the API:

General

  • The maven group id for Failsafe has changed to dev.failsafe. Be sure to update your build config.
  • All files have been moved to the dev.failsafe package. Be sure to update your imports.

Policies

  • All policies now use a builder API. Using the builder API mostly requires inserting builder() and build() methods into the call chain for constructing a policy since the actual with configuration methods are mostly the same as in 2.x policies, with a few changes described below. Some notes:
    • A policy builder can be created via builder(), ex: RetryPolicy.builder().
    • RetryPolicy and CircuitBreaker can also be constructed with default values using ofDefaults().
    • Fallback and Timeout offer additional factory methods for creating a a policy with only their required arguments, without using a builder, ex: Timeout.of(Duration.ofSeconds(10)). Optional arguments must be specified through a builder, ex: Timeout.builder(duration).withInterrupt().build().
    • Policy configuration is now accessible via a policy.getConfig().

RetryPolicy and CircuitBreaker

  • In RetryPolicyBuilder and CircuitBreakerBuilder:
    • withDelay has been renamed to withDelayFn.
    • withDelayOn has been renamed to withDelayFnOn.
    • withDelayWhen has been renamed to withDelayFnWhen.
    • The above method signatures have also been changed to accept a ContextualSupplier instead of a DelayFunction, since it provides access to the same information.

CircuitBreaker

  • onOpen, onClose, and onHalfOpen methods now accept a CircuitBreakerStateChangedEvent argument.
  • allowsExecution() was removed in favor of acquirePermit() and tryAcquirePermit(), which are meant for standalone CircuitBreaker usage.

Fallback

  • The Fallback async factory methods have been removed in favor of a FallbackBuilder.withAsync() option.

Timeout

  • Timeout.withInterrupt(boolean) is now TimeoutBuilder.withInterrupt().

Execution and AsyncExecution

  • The standalone Execution API, and the AsyncExecution API created via the FailsafeExecutor.runAsyncExecution and getAsyncExecution methods, have been unified to include:
    • record(R, Throwable)
    • recordResult(R)
    • recordException(Throwable)
    • complete()
  • The previously supported Execution and AsyncExecution methods for recording a result have been removed. The methods for performing a retry have also been removed. For Execution, isComplete will indicate whether the execution is complete else if retries can be performed. For AsyncExecution retries will automatically be performed, if possible, immediately after a result or failure is recorded.
  • The Execution constructor is no longer visible. Execution instances must now be constructed via Execution.of(policies).
  • Execution.getWaitTime() was renamed to getDelay().

Failsafe class

  • Failsafe.with(P[] policies) was removed in favor of Failsafe.with(P, P...). This should only affect users who were explicitly passing an array to Failsafe.with.

SPI Changes

The following changes effect the SPI classes, for users who are extending Failsafe with custom schedulers or policies:

  • Scheduler and DefauledScheduledFuture were moved to the spi package.
  • Policy and PolicyExecutor were moved to the spi package and some method signatures changed.
  • ExecutionResult was moved to the spi package and made generic.
  • Several new classes were added to the spi package to contain internal execution APIs including ExecutionInternal, SyncExecutionInternal, and AsyncExecutionInternal.
  • FailsafeFuture was moved to the SPI package and some method signatures changed.

Bug Fixes

  • Improved the reliability of async executions, cancellations, and Timeouts.

Improvements

  • Issue #47 - All policies and policy config classes are now threadsafe. Policy builders are not threadsafe.
  • Issue #201 - Thread safety is clearly documented in policy, policy config, and policy builder classes.
  • Issue #292 - Created an extensible Policy SPI.
  • Issue #254 - Added an explicit compose method to FailsafeExecutor.
  • Issue #293 - Added RetryPolicyBuilder.withBackoff(Duration, Duration) and .withDelay(Duration, Duration).
  • Issue #221 - Executor instances configured via FailsafeExecutor.with(Executor) are now used on all executions, including sync executions, and can be used in conjunction with a separately configured ExecutorService or Scheduler for async executions.
  • Added FailsafeExecutor.getPolicies().
  • Added isFirstAttempt() and isRetry() to ExecutionAttempt, which is available via a few event listeners.

2.4.4

Bug Fixes

  • Fixed #298 - Fallback.onFailedAttempt not being called correctly

Improvements

  • Fixed #296 - Add Automatic-Module-Name entry to the generated manifest file

API Changes

  • Added a generic result type R to ExecutionContext, Execution, AsyncExecution, and AsyncRunnable. This ensures that result types are unified across the API. It does mean that there are a few minor breaking changes to the API:
    • ContextualSupplier now has an additional result type parameter R. Normally this type is used as lambda parameters where the type is inferred, so most users should not be impacted. But any explicit generic declaration of this type will not compile until the new parameter is added.
    • PolicyExecutor, which is part of the SPI, now accepts an additional result type parameter R. This is only relevant for SPI users who are implementing their own Policies.
  • Changed FailsafeExecutor.getAsyncExecution to accept AsyncRunnable instead of AsyncSupplier. This is a breaking change for any getAsyncExecution calls, but the fix is to simply remove any return statement. The reason for this change is that the provided object does not need to return a result since the result will already be passed asynchronously to one of the AsyncExecution complete or retry methods.

2.4.3

Bug Fixes

  • Fixed #289 - Binary imcompatibility with code that was compiled against previous Failsafe versions.

2.4.2

Improvements

  • Added RetryPolicy.onRetryScheduled event handler.
  • Added ExecutionEvent.getExecutionCount() and ExecutionContext.getExecutionCount(), which distinguishes between attempts which may have been rejected and completed executions.
  • Added Failsafe.none to create a no-op FailsafeExecutor.
  • Improved support for outer Timeouts with retries.
  • Fixed #221 - Added support for FailsafeExecutor.with(Executor).
  • Fixed #277 - Changed Timeout to use Failsafe's internal scheduler, so that user provided ExecutorService shutdowns do not interfere with timeouts.
  • Fixed #266 - Propagate Future cancellation to supplied CompletionStage when using getStageAsync.

Bug Fixes

  • Fixed #267 - Allow null fallback values to be passed through when using nested fallbacks.

2.4.1

Improvements

  • Fixed #234 - An outer Timeout should cancel any inner retries.

API Changes

  • Deprecated Timeout.withCancel(boolean) and Timeout.canCancel(). Timeouts always cancel any executions and inner retries.
  • Added Timeout.withInterrupt(boolean) to take the place of withCancel.
  • Added ExecutionEvent.getElapsedAttemptTime().

2.4.0

Improvements

  • Added time based thresholding support to CircuitBreaker via:
    • withFailureThreshold(int failureThreshold, Duration failureThresholdingPeriod)
    • withFailureThreshold(int failureThreshold, int failureExecutionThreshold, Duration failureThresholdingPeriod)
    • withFailureRateThreshold(int failureRateThreshold, int failureExecutionThreshold, Duration failureThresholdingPeriod)
  • Added getters to CircuitBreaker for existing count based thresholding settings:
    • getFailureThresholdingCapacity()
    • getSuccessThresholdingCapacity()
  • And added getters to CircuitBreaker for new time based thresholding settings:
    • getFailureRateThreshold()
    • getFailureExecutionThreshold()
    • getFailureThresholdingPeriod()
  • Added some new metrics to CircuitBreaker:
    • getSuccessRate()
    • getFailureRate()
    • getExecutionCount()

API Changes

  • Changed the return type of CircuitBreaker's getFailureThreshold() and getSuccessThreshold() from Ratio to int. getFailureThresholdingCapacity, getFailureRateThreshold, getFailureExecutionThreshold, and getSuccessThresholdingCapacity provide additional detail about thresholding configuration.
  • Removed support for the previously deprecated CircuitBreaker.withTimeout. The Timeout policy should be used instead.

2.3.5

Bug Fixes

  • Fixed #242 - Delays not occurring between manually triggered async execution retries.

2.3.4

Improvements

  • Re-worked internal threading to only create async threads immediately prior to supplier execution. See #230.

Bug Fixes

  • Fixed #240 - handleResult(null) always triggering when an exception is thrown.

2.3.3

Improvements

Added support for CompletionStage to the Fallback policy.

Bug Fixes

  • Fixed #224 - Allow combining random delay and jitter.

API Changes

  • Fallback.apply was made package private.
  • DelayablePolicy.computeDelay was made package private.

2.3.2

Improvements

  • Added CircuitBreaker.getRemainingDelay().
  • Added support for Fallback.VOID.

Bug Fixes

  • Fixed #216 - Incorrect computation of randomDelay.

2.3.1

Improvements

  • Set setRemoveOnCancelPolicy(true) for the internal delay scheduler.
  • Added Scheduler.DEFAULT to return the default scheduler Failsafe uses.

Bug Fixes

  • Fixed #206 - Problem with Fallback converting from failure to success.

2.3.0

Behavior Changes

  • FailsafeExecutor.get and FailsafeExecutor.run will no longer wrap Error instances in FailsafeException before throwing.

Bug Fixes

  • Fixed potential race between Timeout interrupts and execution completion.

2.2.0

Improvements

  • Added a new Timeout policy that fails with TimeoutExceededException.
  • Added ExecutionContext.isCancelled().
  • Added ExecutionContext.getElapsedAttemptTime().
  • Made the internal delay scheduler more adaptive.

API Changes

  • Deprecated CircuitBreaker.withTimeout in favor of using a separate Timeout policy.

Bug Fixes

  • Reset interrupt flag when a synchronous execution is interrupted.
  • Improved handling around externally completing a Failsafe CompletableFuture.

2.1.1

Improvements

  • Added support for CircuitBreaker.withDelay(DelayFunction)
  • Added Fallback.ofException for returning custom exceptions.
  • Added ExecutionContext.getLastResult and .getLastFailure to support retries that depend on previous executions
  • Added CircuitBreakerOpenException.getCircuitBreaker

API Changes

  • RetryPolicy.DelayedFunction was moved to the net.jodah.failsafe.function package.
  • Removed RetryPolicy.canApplyDelayFn

2.1.0

Improvements

  • Added support for Failsafe.with(List<Policy<R>>).
  • Allow null Fallback values.

Behavior Changes

  • A standalone or async execution will only be marked as complete when all policies are complete. Execution.isComplete reflects this.

Bug Fixes

  • Issue #190 - Failure listener called on success for async executions.
  • Issue #191 - Add missing listeners to RetryPolicy copy constructor.
  • Issue #192 - Problem with detecting completion when performing async execution.

2.0.1

Improvements

  • Added support for using ExecutorService via FailsafeExecutor.with(ExecutorService).
  • Added interruptable cancellation for executions ran on ForkJoinPool via CompletableFuture.cancel(true).

Bug Fixes

  • Issue #171 - Handle completed futures when using getStageAsync.

2.0

Improvements

  • Policy composition is now supported.
  • A Policy SPI is now available.
  • Async execution is now supported without requiring that a ScheduledExecutorService or Scheduler be configured. When no scheduler is configured, the ForkJoinPool's common pool will be used by default.
  • Fallback now support async execution via ofAsync.
  • CircuitBreaker supports execution metrics (see below).
  • Strong typing based on result types is supported throughout the API.

Behavior Changes

  • RetryPolicy now has 3 max attempts by default.
  • CircuitBreaker now has a 1 minute delay by default.

JRE Changes

  • Java 8+ is now required

API Changes

Failsafe 2.0 includes a few API changes from 1.x that were meant to consolidate behavior such as the execution APIs, which are now based on common Policy implementations, while adding some new features such as Policy composition.

  • Policies
    • Policy implementations now take a type parameter R that represents the expected result type.
    • Some of the time related policy configurations have been changed to use Duration instead of long + TimeUnit.
  • Policy configuration
    • Multiple policies can no longer be configured by chaining multiple Failsafe.with calls. Instead they must be supplied in a single Failsafe.with call. This is was intentional to require users to consider the ordering of composed policies. See the README section on policy composition for more details.
  • RetryPoilicy
    • The retryOn, retryIf, and retryWhen methods have been replace with handleOn, etc.
  • CircuitBreaker
    • The failOn, failIf, and failWhen methods have been replace with handleOn, etc.
  • Fallbacks
    • Fallbacks must be wrapped in a Fallback instance via Fallback.of
  • Failsafe APIs
    • Suppliers are now used instead of Callables.
    • java.util.function.Predicate is used instead of Failsafe's internal Predicate.
    • withFallback is no longer supported. Instead, Failsafe.with(fallback...) should be used.
  • Async execution
    • Async execution is now performed with the getAsync, runAsync, getStageAsync, etc. methods.
    • Async API integration is now supported via the getAsyncExecution, runAsyncExecution, etc. methods.
  • Event listeners
    • Event listeners now all consume a single ExecutionEvent object, which includes references to the result, failure, and other information.
    • Event listeners that are specific to policies, such as onRetry for RetryPolicy, must now be configured through the policy instance. The top level Failsafe API only supports onComplete, onSuccess, and onFailure. Individual Policy implementations still support onSuccess and onFailure in addition to policy specific events.
    • The top level Failsafe.onSuccess event listener will only be called if all configured policies consider an execution to be successful, otherwise onFailure will be called.
    • The Listeners class was removed, since it was mostly intended for Java 6/7 users.
    • The async event listener APIs were removed. Events will always be delivered in the same thread as the execution that they follow or preceed, including for async executions.
  • Java 8
    • java.time.Duration is used instead of Failsafe's own Duration impl.
    • ChronoUnit is used instead of TimeUnit in policies.
  • ExecutionContext.getExecutions is now getAttemptCount.
  • Schedulers.of(ScheduledExecutorService) was moved to the Scheduler interface.

API Additions

  • CircuitBreaker
    • preExecute is now exposed to support standalone usage.
    • Execution metrics are available via getFailureCount, getFailureRatio, getSuccessCount, and getSuccessRatio.

Bug Fixes

  • Issue #152 - Min/max delay was not being computed correctly

1.1.0

Bug Fixes

  • Issue #115 - Jitter bigger than Delay causes a (random) failure at runtime
  • Issue #116 - Setting jitter without a delay works fine bug
  • Issue #123 - Ability to reset the jitterFactor

Improvements

  • Issue #110 - Added support for computed delays: RetryPolicy.withDelay(DelayFunction)
  • Issue #126 - Added support for random delays: RetryPolicy.withDelay(1, 10, TimeUnit.MILLISECONDS)

1.0.5

Bug Fixes

  • Issue #97 - Should not increment exponential backoff time on first attempt
  • Issue #92 - handleRetriesExceeded called incorrectly.

1.0.4

API Changes

  • Asynchronous execution attempts no longer throw CircuitBreakerOpenException if a configured CircuitBreaker is open when an execution is first attempted. Instead, the resulting Future is completed exceptionally with CircuitBreakerOpenException. See issue #84.

Improvements

  • Issue #81 - Added single argument failure configuration to avoid varargs related warnings.

1.0.3

Bug Fixes

  • Fixed #76 - Make sure AsyncExecution.completeOrRetry is called when Error is thrown.

1.0.2

Bug Fixes

  • Fixed #75 - Incorrect future completion when a fallback is present.

1.0.1

Changes

  • FailsafeException now has public constructors, for easier mocking and testing.

1.0.0

API Changes

  • Failsafe will now only throw FailsafeException when an execution fails with a checked Exception. See issue #66 for details.

0.9.5

Bug Fixes

  • Fixed #59 - Classloading issue on Java 6/7.

0.9.4

Bug Fixes

  • Fixed #63 - Proper handling of thread interrupts during synchronous execution delays.
  • Fixed #54 - Added hashCode and equals implementations to Duration.

0.9.3

New Features

  • Added OSGi support.
  • FailsafeFutuer.cancel calls completion handlers. .get after cancel throws CancellationException.

Bug Fixes

  • Fixed #52 - FailsafeFuture.cancel not working as expected.
  • Fixed #55 - Fallback always called for asynchronous executions.

API Changes

  • CircuitBreakerOpenException now extends FailsafeException.

0.9.2

New Features

  • Various fallback and listener API additions and improvements

0.9.1

New Features

  • Added support for retry delay jitter.

0.9.0

New Features

Bug Fixes

  • Fixed issue #36 - Failed attempt listener not always called on completion.
  • Fixed issue #34 - CircuitBreaker should default to closed state.

0.8.3

Bug Fixes

  • Fixed #33 - CircuitBreaker not decrementing currentExections when under load

0.8.2

New Features

  • Added support for onRetriesExceeded listeners.
  • RetryPolicy can be extended (it's no longer marked as final)

Bug Fixes

  • Abort should not call failure listeners.

0.8.1

New Features

  • Simplified listeners API.
  • Added support for failure listeners via Failsafe.with(...).onFailure(e -> {}).
  • Added onAbort listeners.
  • Added additional async listeners.
  • RetryPolicy and CircuitBreaker now support multiple configuration rules. Ex: new RetryPolicy().retryWhen(null).retryWhen(""). If any rule matches then the policy is matched.

API Changes

  • Added top level support for listener registration via Failsafe.with(...).onXxx. The Listeners class is now only meant for Java 6 and 7 usage via method overrides.
  • Removed listener registration from Listeners class.
  • Removed AsyncListeners class.
  • Removed listener registration from FailsafeFuture class.

0.8.0

New Features

  • Added support for circuit breakers

API Changes

  • Project renamed from Recurrent to Failsafe

0.7.1

Bug Fixes

  • Added better support for scheduling failure handling
  • Fixed RetryPolicy failure assignability checking

API Changes

  • Invocation APIs were renamed to Execution to better align with the java.util.concurrent naming.
  • InvocationStats.getAttemptCount() was renamed to ExecutionStats.getExecutions()

0.7.0

New Features

  • Added additional contextual callable and runnable support

API Changes

  • Changed to a new API entry point: Recurrent.with.
  • Added .with for configuring listeners.

0.6.0

New Features

  • Added RetryPolicy.abortOn, abortWhen and abortIf methods to abort retries when matched.

API Changes

  • RetryPolicy.retryWhen was renamed to retryIf for retrying if a Predicate is matched.
  • RetryPolicy.retryFor was renamed to retryWhen for retrying when a result is matched.
  • Scheduler and Schedulers were moved to net.jodah.recurrent.util.concurrent.

0.5.0

New Features

  • Added support for synchronous and asynchronous event listeners
  • Added support for CheckedRunnable

API Changes

  • The Recurrent.run methods now require a CheckedRunnable rather than Runnable. This allows Recurrent to be used on code that throws checked exceptions without having to wrap the code in try/catch blocks.
  • The synchronous Recurrent.run and Recurrent.get methods will throw a RecurrentException if a failure occurs and the retry policy is exceeded.

0.4.0

New Features

  • Added better support for invocation tracking

API Changes

  • New Invocation and AsyncInvocation APIs

0.3.3

New Features

  • Add Scheduler API
  • Make RetryPolicy copyable

Behavior Changes

  • Require ContextualCallable and ContextualRunnable to be manually retried
  • Add support for checking multiple retry policy conditions

API Changes

  • Make ContextualRunnable throw Exception

0.3.2

New Features

  • Add support for retrying when an invocation result matches a policy

0.3.1

New Features

  • Added support for seprate retry tracking.

0.3.0

  • Initial Release