You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Howdy folks. As per title, my Surface Pro 4 with the Intel Core i7 6650u is stuck at 1.1Ghz. I have removed the battery as it started swelling. I tried disabling bdprochot and sadly that did not have an effect. Here is the output of throttled debug:
root@at-hv-03:~# ./throttled/throttled.py --debug
[I] Detected CPU architecture: Intel Skylake
[I] Trying to unlock MSR allow_writes.
[I] Testing if undervolt is supported...
[I] Testing if HWP is supported...
[I] Loading config file.
[W] No valid Sysfs_Power_Path found! Trying upower method #1
[W] Trying upower method #2
[W] No valid power detection methods found. Assuming that the system is running on battery power.
[D] cpu platform info: maximum non turbo ratio = 22
[D] cpu platform info: maximum efficiency ratio = 4
[D] cpu platform info: minimum operating ratio = 4
[D] cpu platform info: feature ppin cap = 0
[D] cpu platform info: feature programmable turbo ratio = 1
[D] cpu platform info: feature programmable tdp limit = 1
[D] cpu platform info: number of additional tdp profiles = 1
[D] cpu platform info: feature programmable temperature target = 1
[D] cpu platform info: feature low power mode = 1
[W] the configured cTDP profile is not supported by this CPU
[W] the configured cTDP profile is not supported by this CPU
[D] Undervolt plane CORE - write 0 mV (0x0) - read 0 mV (0x0) - match OK
[D] Undervolt plane GPU - write 0 mV (0x0) - read 0 mV (0x0) - match OK
[D] Undervolt plane CACHE - write 0 mV (0x0) - read 0 mV (0x0) - match OK
[D] Undervolt plane UNCORE - write 0 mV (0x0) - read 0 mV (0x0) - match OK
[D] Undervolt plane ANALOGIO - write 0 mV (0x0) - read 0 mV (0x0) - match OK
[D] HWP - write "0x20" - read "0x20" - match OK
[I] Starting main loop.
[D] core 0 thermal status: thermal limit status = 0
[D] core 0 thermal status: thermal limit log = 0
[D] core 0 thermal status: prochot or forcepr status = 0
[D] core 0 thermal status: prochot or forcepr log = 0
[D] core 0 thermal status: crit temp status = 0
[D] core 0 thermal status: crit temp log = 0
[D] core 0 thermal status: thermal threshold1 status = 0
[D] core 0 thermal status: thermal threshold1 log = 0
[D] core 0 thermal status: thermal threshold2 status = 0
[D] core 0 thermal status: thermal threshold2 log = 0
[D] core 0 thermal status: power limit status = 0
[D] core 0 thermal status: power limit log = 0
[D] core 0 thermal status: current limit status = 1
[D] core 0 thermal status: current limit log = 1
[D] core 0 thermal status: cross domain limit status = 0
[D] core 0 thermal status: cross domain limit log = 0
[D] core 0 thermal status: cpu temp = 64
[D] core 0 thermal status: temp resolution = 1
[D] core 0 thermal status: reading valid = 1
[D] core 1 thermal status: thermal limit status = 0
[D] core 1 thermal status: thermal limit log = 0
[D] core 1 thermal status: prochot or forcepr status = 0
[D] core 1 thermal status: prochot or forcepr log = 0
[D] core 1 thermal status: crit temp status = 0
[D] core 1 thermal status: crit temp log = 0
[D] core 1 thermal status: thermal threshold1 status = 0
[D] core 1 thermal status: thermal threshold1 log = 0
[D] core 1 thermal status: thermal threshold2 status = 0
[D] core 1 thermal status: thermal threshold2 log = 0
[D] core 1 thermal status: power limit status = 0
[D] core 1 thermal status: power limit log = 0
[D] core 1 thermal status: current limit status = 1
[D] core 1 thermal status: current limit log = 1
[D] core 1 thermal status: cross domain limit status = 0
[D] core 1 thermal status: cross domain limit log = 0
[D] core 1 thermal status: cpu temp = 63
[D] core 1 thermal status: temp resolution = 1
[D] core 1 thermal status: reading valid = 1
[D] core 2 thermal status: thermal limit status = 0
[D] core 2 thermal status: thermal limit log = 0
[D] core 2 thermal status: prochot or forcepr status = 0
[D] core 2 thermal status: prochot or forcepr log = 0
[D] core 2 thermal status: crit temp status = 0
[D] core 2 thermal status: crit temp log = 0
[D] core 2 thermal status: thermal threshold1 status = 0
[D] core 2 thermal status: thermal threshold1 log = 0
[D] core 2 thermal status: thermal threshold2 status = 0
[D] core 2 thermal status: thermal threshold2 log = 0
[D] core 2 thermal status: power limit status = 0
[D] core 2 thermal status: power limit log = 0
[D] core 2 thermal status: current limit status = 1
[D] core 2 thermal status: current limit log = 1
[D] core 2 thermal status: cross domain limit status = 0
[D] core 2 thermal status: cross domain limit log = 0
[D] core 2 thermal status: cpu temp = 64
[D] core 2 thermal status: temp resolution = 1
[D] core 2 thermal status: reading valid = 1
[D] core 3 thermal status: thermal limit status = 0
[D] core 3 thermal status: thermal limit log = 0
[D] core 3 thermal status: prochot or forcepr status = 0
[D] core 3 thermal status: prochot or forcepr log = 0
[D] core 3 thermal status: crit temp status = 0
[D] core 3 thermal status: crit temp log = 0
[D] core 3 thermal status: thermal threshold1 status = 0
[D] core 3 thermal status: thermal threshold1 log = 0
[D] core 3 thermal status: thermal threshold2 status = 0
[D] core 3 thermal status: thermal threshold2 log = 0
[D] core 3 thermal status: power limit status = 0
[D] core 3 thermal status: power limit log = 0
[D] core 3 thermal status: current limit status = 1
[D] core 3 thermal status: current limit log = 1
[D] core 3 thermal status: cross domain limit status = 0
[D] core 3 thermal status: cross domain limit log = 0
[D] core 3 thermal status: cpu temp = 62
[D] core 3 thermal status: temp resolution = 1
[D] core 3 thermal status: reading valid = 1
[D] TEMPERATURE_TARGET - write 0xf - read 0xf - match OK
[D] MSR PACKAGE_POWER_LIMIT - write 0x42816000dd80e8 - read 0x42816000dd80e8 - match OK
[D] MCHBAR PACKAGE_POWER_LIMIT - write 0x42816000dd80e8 - read 0x42816000dd80e8 - match OK
[D] BDPROCHOT - write "0x0" - read "0x0" - match OK
Any suggestions as to how to circumvent this issue would be greatly appreciated.
The text was updated successfully, but these errors were encountered:
Howdy folks. As per title, my Surface Pro 4 with the Intel Core i7 6650u is stuck at 1.1Ghz. I have removed the battery as it started swelling. I tried disabling bdprochot and sadly that did not have an effect. Here is the output of throttled debug:
Any suggestions as to how to circumvent this issue would be greatly appreciated.
The text was updated successfully, but these errors were encountered: