Skip to content

Latest commit

 

History

History
62 lines (46 loc) · 4.46 KB

comissioning.md

File metadata and controls

62 lines (46 loc) · 4.46 KB
Raw

First comissioning of RNGBridge

Step 1 - Connect RNGBridge to charge controller

Depending on your model connect RNGBridge with an RJ12 or RJ45 cable to your charge controllers RS232 or RS485 port respectively. The orange status LED on RNGBridge will light up solid for a few seconds. Once the LED starts blinking at a 1 second interval you can continue with the next step.

If the LED blinks on for 2 seconds and off for 1 second then there is a communication issue with your charge controller. Double check your wiring and make sure your device is supported as described in Tested Controllers. If you still have issues get help on my discord server by clicking on this icon -> Discord

Step 2 - Connect to RNGBridge wifi

Connect your phone/tablet/pc to the WiFi network called rngbridge followed by a mix of 12 letters and numbers for example rngbridge E8DB849C6FDF

Step 3 - Open user interface

Once connected, your phone/tablet/pc should ask you to sign in to rngbridge (captive portal). On Android you will need to click on the popup on other devices (iOS, MacOS) the captive portal will open automatically. Once opened you are greeted with the user interface.

On some devices this can take up to 30 seconds for the message to be displayed.

If the captive portal does not open or no message is displayed you can alternatively type in the URL 192.168.4.1 and open the website (or click here). After the page loaded, you are presented with the user interface of RNGBridge.

Step 4 - Change device address

Depending on your charge controller or if you have configured it with the bluetooth module before it might be needed to change the modbus device address RNGBridge uses to communicate with your charge controller. One good indication for this is if the orange led stays lit for 2 seconds, turns off for 2 seconds and the data in the GUI is all zeros and does not change. To change the address follow the follwing steps:

  1. Open the settings menu by clicking the gear icon in the top right of the page.
  2. Click on the panel named Device.
  3. Enter the device address (1 - 255 where 255 is default) in the Address field
  4. Click on SAVE DEVICE CONFIG

If you want to use RNGBridge as standalone aka in access point mode you are done with comissioning now. If you want to connect RNGBridge with your local WiFi network continue with step 5.

Step 5 - Connect to WiFi network

  1. Open the settings menu by clicking the gear icon in the top right of the page.
  2. Click on the panel named WiFi.
  3. select Client from the WiFi mode dropdown.
  4. Enter the name of the WiFi network you want RNGBridge to connect with in the SSID field.
  5. Enter the password of the WiFi network in the Password field.

DHCP is selected by default, meaning RNGBridge will get an IP assigned from your network router. If you want to give it a static IP address or want to do some advanced configuration (Netmask, Gateway, DNS) disable DHCP and more options will appear.

Verify that your WiFi settings (SSID, Password, etc.) are correct and press the SAVE WIFI CONFIG button. After that RNGBridge will reboot and try to connect to the WiFi network. If it can't connect due to the WiFi not being available or the settings being invalid RNGBridge will fall back to the access point mode.

Step 6 - Open user interface from local network device

Once RNGBridge has connected successfully with your local WiFi network you can access the user interface from all devices connected to you local network. For that open a webbrowser and enter the IP address of RNGBridge.

If you can't figure out the IP address you can connect a USB to serial converter to pin D4 of the ESP8266 D1 Mini and open a terminal with 8N1 and 115200 baudrate. Then press the reset button of the ESP and the IP address will be printed to your console.

If everything worked out fine you are now setup. For infos on how to setup MQTT or PVOutput please take a look at the respective guides MQTT and PVOutput.