aws-s3 input writes to Filebeat registry without proper synchronization
#39052
Assignees
Labels
Team:Elastic-Agent
Label for the Agent team
Comments
|
Pinging @elastic/elastic-agent (Team:Elastic-Agent) |
faec
changed the title
awss3 input writes to Filebeat registry without proper synchronizationaws-s3 input writes to Filebeat registry without proper synchronization
6 tasks
faec
added a commit
that referenced
this issue
Apr 29, 2024
…#39131) This is a cleanup of concurrency and error handling in the `aws-s3` input that could cause several known bugs: - Memory leaks ([1](elastic/integrations#9463), [2](#39052)). This issue was caused because the input could run several scans of its s3 bucket simultaneously, which led to the cleanup routine `s3Poller.Purge` being called many times concurrently. Inefficiencies in this function caused it to accumulate over time, creating many copies of the state data which could overload process memory. Fixed by: * Changing the `s3Poller` run loop to only run one scan at a time, and wait for it to complete before starting the next one. * Having each object persist its own state after completing, instead of waiting until the end of a scan and writing an entire bucket worth of metadata at once. - This also allowed the removal of other metadata: there is no longer any reason to track the detailed acknowledgment state of each "listing" (page of ~1K events during bucket enumeration), so the `states` helper object is now much simpler. - Skipped data due to buggy last-modified calculations ([3](#39065)). The most recent scanned timestamp was calculated incorrectly, causing the input to skip a growing number of events as ingestion progressed. * Fixed by removing the bucket-wide last modified check entirely. This feature was already risky, since objects with earlier creation timestamps can appear after ones with later timestamps, so there is always the possibility to miss objects. Since the value was calculated incorrectly and was discarded between runs, we can remove it without breaking compatibility and reimplement it more safely in the future if needed. - Skipped data because rate limiting is treated as permanent failure ([4](#39114)). The input treats all error types the same, which causes many objects to be skipped for ephemeral errors. * Fixed by creating an error, `errS3DownloadFailure`, that is returned when processing failure is caused by a download error. In this case, the S3 workers will not persist the failure to the `states` table, so the object will be retried on the next bucket scan. When this happens the worker also sleeps (using an exponential backoff) before trying the next object. * Exponential backoff was also added to the bucket scanning loop for page listing errors, so the bucket scan is not restarted needlessly.
mergify bot
pushed a commit
that referenced
this issue
Apr 29, 2024
…#39131) This is a cleanup of concurrency and error handling in the `aws-s3` input that could cause several known bugs: - Memory leaks ([1](elastic/integrations#9463), [2](#39052)). This issue was caused because the input could run several scans of its s3 bucket simultaneously, which led to the cleanup routine `s3Poller.Purge` being called many times concurrently. Inefficiencies in this function caused it to accumulate over time, creating many copies of the state data which could overload process memory. Fixed by: * Changing the `s3Poller` run loop to only run one scan at a time, and wait for it to complete before starting the next one. * Having each object persist its own state after completing, instead of waiting until the end of a scan and writing an entire bucket worth of metadata at once. - This also allowed the removal of other metadata: there is no longer any reason to track the detailed acknowledgment state of each "listing" (page of ~1K events during bucket enumeration), so the `states` helper object is now much simpler. - Skipped data due to buggy last-modified calculations ([3](#39065)). The most recent scanned timestamp was calculated incorrectly, causing the input to skip a growing number of events as ingestion progressed. * Fixed by removing the bucket-wide last modified check entirely. This feature was already risky, since objects with earlier creation timestamps can appear after ones with later timestamps, so there is always the possibility to miss objects. Since the value was calculated incorrectly and was discarded between runs, we can remove it without breaking compatibility and reimplement it more safely in the future if needed. - Skipped data because rate limiting is treated as permanent failure ([4](#39114)). The input treats all error types the same, which causes many objects to be skipped for ephemeral errors. * Fixed by creating an error, `errS3DownloadFailure`, that is returned when processing failure is caused by a download error. In this case, the S3 workers will not persist the failure to the `states` table, so the object will be retried on the next bucket scan. When this happens the worker also sleeps (using an exponential backoff) before trying the next object. * Exponential backoff was also added to the bucket scanning loop for page listing errors, so the bucket scan is not restarted needlessly. (cherry picked from commit e588628) # Conflicts: # x-pack/filebeat/input/awss3/input.go
Merged
6 tasks
faec
added a commit
that referenced
this issue
Apr 29, 2024
…ss in the `aws-s3` input (#39262) * Fix concurrency bugs that could cause data loss in the `aws-s3` input (#39131) This is a cleanup of concurrency and error handling in the `aws-s3` input that could cause several known bugs: - Memory leaks ([1](elastic/integrations#9463), [2](#39052)). This issue was caused because the input could run several scans of its s3 bucket simultaneously, which led to the cleanup routine `s3Poller.Purge` being called many times concurrently. Inefficiencies in this function caused it to accumulate over time, creating many copies of the state data which could overload process memory. Fixed by: * Changing the `s3Poller` run loop to only run one scan at a time, and wait for it to complete before starting the next one. * Having each object persist its own state after completing, instead of waiting until the end of a scan and writing an entire bucket worth of metadata at once. - This also allowed the removal of other metadata: there is no longer any reason to track the detailed acknowledgment state of each "listing" (page of ~1K events during bucket enumeration), so the `states` helper object is now much simpler. - Skipped data due to buggy last-modified calculations ([3](#39065)). The most recent scanned timestamp was calculated incorrectly, causing the input to skip a growing number of events as ingestion progressed. * Fixed by removing the bucket-wide last modified check entirely. This feature was already risky, since objects with earlier creation timestamps can appear after ones with later timestamps, so there is always the possibility to miss objects. Since the value was calculated incorrectly and was discarded between runs, we can remove it without breaking compatibility and reimplement it more safely in the future if needed. - Skipped data because rate limiting is treated as permanent failure ([4](#39114)). The input treats all error types the same, which causes many objects to be skipped for ephemeral errors. * Fixed by creating an error, `errS3DownloadFailure`, that is returned when processing failure is caused by a download error. In this case, the S3 workers will not persist the failure to the `states` table, so the object will be retried on the next bucket scan. When this happens the worker also sleeps (using an exponential backoff) before trying the next object. * Exponential backoff was also added to the bucket scanning loop for page listing errors, so the bucket scan is not restarted needlessly. (cherry picked from commit e588628) # Conflicts: # x-pack/filebeat/input/awss3/input.go * fix merge --------- Co-authored-by: Fae Charlton <fae.charlton@elastic.co>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
The function that refreshes the
aws-s3input's state in the registry,(*states).writeStates, is called by(*s3Poller).Purge, which processes acknowledged event pages and finalizes their state. However, depending on the input configuration and the size of the target bucket,Purgecan be called many times concurrently, whereas thestatestore.Storeobject used to write to the registry is meant to be owned by a single goroutine. This can lead to several goroutines writing to the same non-synchronized object at the same time, which can cause instability and registry corruption.This issue is one of the factors causing elastic/integrations#9463.
The text was updated successfully, but these errors were encountered: