vr_clo.txt

"    General options\n\
      --vr-verbose=<yes|no> [default=no]\n\
          Toggle verbosity: prints messages for x387 instructions and client\n\
          requests.\n\
\n\
      --count-op=<yes|no> [default=yes]\n\
          Toggle floating-point operations counting.\n\
\n\
      --backend=<verrou|mcaquad|checkdenorm> [default=verrou]\n\
          Select the verrou, mcaquad or checkdenorm backend.  verrou enables\n\
          to perform several rounding mode (See --rounding-mode option).\n\
          mcaquad enables to perform MCA (Monte Carlo Arithmetics) based on\n\
          extented precision in quad (See --mca-mode, --mca-precision-double\n\
          and --mca-precision-float options). The integration of mcaquad\n\
          backend in the frontend verrou is still considered as experimental.\n\
          checkdenorm enables the ftz rounding-mode and the --check-denorm\n\
          and --cd-gen-file options.\n\
\n\
          This option can be activated with the env variable VERROU_BACKEND\n\
\n\
    Perturbation of floating-point operations\n\
      --rounding-mode=<random[|_det|_comdet|_scomdet]|average[|_det|_comdet|_scomdet]|prandom[|_det|_comdet]|sr_[s]monotonic|nearest|native|upward|downward|toward_zero|away_zero|farthest|float|ftz>\n\
      [default=native]\n\
          Emulate the given rounding mode for operations instrumented with\n\
          the verrou backend. If this option is not provided, Verrou always\n\
          rounds to the nearest floating-point. Supported rounding modes are:\n\
\n\
          •   Stochastic rounding modes: random, average, prandom,\n\
              random_det, average_det, prandom_det, random_comdet,\n\
              average_comdet, prandom_comdet, random_scomdet,\n\
              average_scomdet, sr_monotonic, sr_smonotonic.\n\
\n\
          •   IEEE-754 rounding modes: nearest, upward, downward,\n\
              toward_zero.\n\
\n\
          •   Other: native[default] (similar to nearest (maybe different\n\
              with --libm=instrumented), away_zero, farthest, float,\n\
              ftz(imply checkdenorm backend).\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_ROUNDING_MODE.\n\
\n\
      --libm=<auto_exclude|manual_exclude|instrumented>\n\
      [default=auto_exclude]\n\
          Define the behavior of verrou with libm.\n\
\n\
          •   auto_exclude : The libm exclusion is automaticaly detected\n\
              thanks pattern detection. The library detected are libm,\n\
              vgpreload_verrou, interlibmath, libquadmath and libgcc_s. If\n\
              you need to perturb libgcc_s, we will need to use libgcc_s.\n\
\n\
          •   manual_exclude : The automatic detection is ignored and the\n\
              user has to define manually the exclusion thanks --exclude\n\
              option. This option is usefull if the pattern detection detect\n\
              object you need to perturb.\n\
\n\
          •   instrumented : the interposition library Interlibmath is\n\
              loaded. This option is valid only with verrou backend. This\n\
              option imply implicitly the libm exclusion.\n\
\n\
          The option instrumented is not yet compatible with verrou_dd_sym\n\
          and verrou_dd_line. When it will be the case, the default will\n\
          switch from auto_exclude to instrumented\n\
\n\
      --libm-noinst-rounding-mode==<native|nearest> [default=native]\n\
\n\
          Select the behavior of libm (when --libm=instrumented is activated)\n\
          when libm function are not instrumented (thanks --exclude or\n\
          --source) between native and nearest.\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_LIBM_NOINST_ROUNDING_MODE.\n\
\n\
      --mca-mode=<mca|rr|pb|ieee> [default=mca]\n\
          Emulate the given MCA mode for operations instrumented with the\n\
          mcaquad backend. Supported mca modes are:\n\
\n\
          •   mca : full mca (default)\n\
\n\
          •   rr : random rounding\n\
\n\
          •   pb : precision bounding\n\
\n\
          •   ieee : ieee (rounding to nearest)\n\
\n\
          The mcaquad backend implementation come from Verificarlo : More\n\
          information on Verificalo github[2]\n\
\n\
      --mca-precision-double= [default=53]\n\
          Configure the magnitude of inexact function used by mcaquad backend\n\
          for double operation.\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_MCA_PRECISION_DOUBLE.\n\
\n\
      --mca-precision-float= [default=24]\n\
          Configure the magnitude of inexact function used by mcaquad backend\n\
          for float operation.\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_MCA_PRECISION_FLOAT.\n\
\n\
      --vr-seed=RNG_SEED [default=automatically generated]\n\
          If present, this option allows setting the seed of the\n\
          pseudo-Random Number Generator used for the random or average\n\
          rounding modes. The same option can also be used to set the seed of\n\
          the hash function used for the [p]random_[com]det and\n\
          average_[com]det rounding mode. This helps reproducing the behavior\n\
          of a program under Verrou.\n\
\n\
          If this option is omitted, the pRNG is seeded with a value based on\n\
          the current time and process id, so that it should change at each\n\
          execution.\n\
\n\
          This option can be activated with the env variable VERROU_SEED.\n\
\n\
      --prandom-update=func [default=none]\n\
          If present, this option the p-value of the prandom[|det|comdet]\n\
          rounding mode is updated (with an uniform random selection between\n\
          0 and 1) at the beginning of each function call. Be careful the\n\
          option is highly sensitive to the program compilation option. If\n\
          each the update is inserted between each floating point operations\n\
          the prandom and random modes are equivalent.\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_PRANDOM_UPDATE.\n\
\n\
      --prandom-pvalue=P\n\
          If present, this option the p-value of the prandom[|det|comdet]\n\
          rounding mode is set to P instead of the random number between 0\n\
          and 1. If P is equal to 0., prandom and upward are equivalent. If P\n\
          is equal to 1., prandom and downward are equivalent. If P is equal\n\
          to .5, prandom and random are equivalent.\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_PRANDOM_PVALUE.\n\
\n\
      --vr-instr=<add|sub|mul|div|mAdd|mSub|sqrt|conv> [default=all]\n\
          Toggle instrumentation of floating-point additions, subtractions,\n\
          multiplications, divisions, fused multiply additions, fused\n\
          multiply subtractions, square root, conversions (only double to\n\
          float cast) respectively. This option can be set multiple times (or\n\
          use \",\" to separate arguments) to instrument multiple types of\n\
          operations.\n\
\n\
          If this option is not provided, all supported operations types are\n\
          instrumented.\n\
\n\
          This option can be activated with the env variable VERROU_INSTR.\n\
\n\
      --vr-instr-scalar=<yes|no> [default=no]\n\
          Toggle instrumentation of x387 scalar instructions.\n\
\n\
      --vr-instr-llo=<yes|no> [default=yes]\n\
          Toggle instrumentation of llo scalar instructions (cast and all fma\n\
          instructions are considered as llo).\n\
\n\
      --vr-instr-vec<2,4,8>=<yes|no> [default=yes]\n\
          Toggle instrumentation of vectorized instructions (number\n\
          corresponds to the pack size)\n\
\n\
      --vr-instr-unk=<yes|no> [default=yes]\n\
          Toggle instrumentation of instructions with unknown vectorized\n\
          status (fma is unvectorized in valgrind IR).\n\
\n\
      --vr-instr-[flt|dbl]=<yes|no> [default=yes]\n\
          Toggle instrumentation of float (or double) instructions.\n\
\n\
    Instrumentation scope\n\
      --instr-atstart=<yes|no> [default=yes]\n\
          Toggle instrumentation state on or off at program start. Useful in\n\
          combination with client requests.\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_INSTR_ATSTART.\n\
\n\
      --exclude=FILE\n\
          Symbols listed in FILE will be left uninstrumented.\n\
\n\
          This option can be activated with the env variable VERROU_EXCLUDE.\n\
\n\
      --gen-exclude=FILE\n\
          Generate in FILE a list of all symbols (which contain perturbated\n\
          floating point instruction) encountered during program execution.\n\
          This is useful to build an exclusion list.\n\
\n\
          In combination with --exclude, only list symbols which were not\n\
          already present in the provided exclusion list.\n\
\n\
          WARNING: in order to generate a correct list, the whole binary\n\
          (including symbols listed in the list provided using --exclude)\n\
          must be instrumented. When using both --gen-exclude and --exclude,\n\
          it is advised to avoid perturbating rounding-modes using\n\
          --rounding-mode=nearest.\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_GEN_EXCLUDE.\n\
\n\
      --source=FILE\n\
          When this option is present, only instructions coming from source\n\
          code lines listed in FILE are instrumented.\n\
\n\
          This option can be activated with the env variable VERROU_SOURCE.\n\
\n\
      --warn-unknown-source=FILE\n\
          This option requires the use of --source option. When used, verrou\n\
          generates warning for each line of code (which execute floating\n\
          point operation) neither present in the FILE defined by --source\n\
          option nor in the FILE provided by --warn-unknown-source option.\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_WARN_UNKNOWN_SOURCE.\n\
\n\
      --gen-source=FILE\n\
          Generate in FILE the list of all source code lines (which contain\n\
          perturbated floating point instruction) encountered during program\n\
          execution.\n\
\n\
          In combination with --source, only list source code lines which\n\
          were not already present in the provided list.\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_GEN_SOURCE.\n\
\n\
      --expect-clr=EXPECT_FILE\n\
          When this option is present the expect script is read. This file\n\
          defines the interaction between verrou and the stdout (See expect\n\
          format). The main idea behind this format is to apply client\n\
          request action when a line match a MATCH or EXPECT line. A MATCH\n\
          line can be match anytime, whereas the EXPECT lines are matched\n\
          sequentially.\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_EXPECT_CLR.\n\
\n\
      --output-expect-rep=REP\n\
          Specify the repository of expect log file. By default the log file\n\
          is EXPECT_FILE.log-PID. With this option it is REP/expect.log-PID.\n\
          This option as also influence on the keys dump-stdout: and\n\
          dump-filtered-stdout:of the expect format).\n\
\n\
          This option can be activated with the env variable\n\
          VERROU_OUTPUT_EXPECT_REP.\n\
\n\
    Coverage generation\n\
      --trace=FILE\n\
          Activate the Basic Blocks Coverage for the symbols specified in\n\
          FILE.\n\
\n\
      --output-trace-rep=REP\n\
          Specify the REP directory for the trace output files.\n\
\n\
    Detection options\n\
      --check-nan=<yes|no> [default=yes]\n\
          Activate NaN detection. NaN produces a valgrind error. This\n\
          functionality requires the verrou backend.\n\
\n\
      --check-inf=<yes|no> [default=yes]\n\
          Activate Inf detection. +/-Inf produces a valgrind error. This\n\
          functionality requires the verrou backend.\n\
\n\
      --check-cancellation=<yes|no> [default=no]\n\
          Activate cancellation detection. Cancellation produces a valgrind\n\
          error. This functionality is available for the verrou, mcaquad and\n\
          checkdenorm backends. The level of detected cancellations can be\n\
          configured with --cc-threshold-float and --cc-threshold-double.\n\
\n\
      --cc-gen-file=<FILE>\n\
          Generate in FILE with the source format for each code source line\n\
          which produces at least one cancellation. This functionality is\n\
          available for verrou, mcaquad and checkdenorm backends. The level\n\
          of detected cancellations can be configured with --cc-threshold-\n\
          float and --cc-threshold-double.\n\
\n\
      --cc-threshold-float=<integer> [default=24]\n\
          Configure the cancellation detection threshold for float\n\
          operations. Default value is still experimental and could have to\n\
          change.\n\
\n\
      --cc-threshold-double=<integer> [default=40]\n\
          Configure the cancellation detection threshold for double\n\
          operations. Default value is still experimental and could have to\n\
          change.\n\
\n\
      --check-denorm=<yes|no> [default=no]\n\
          Activate denormal number detection. Denormal number produced by\n\
          floating point operation produces a valgrind error. This\n\
          functionality is available for the checkdenorm backend.\n\
\n\
      --cd-gen-file=<FILE>\n\
          Generate in FILE with the source format for each code source line\n\
          which produces at least one denormal number. This functionality is\n\
          available for checkdenorm backend.\n\
\n\
      --check-max-float=<yes|no> [default=no]\n\
          Activate max float detection. This functionality is compatible only\n\
          with verrou backend.\n\
\n\
    Performance optimization\n\
      --vr-unsafe-llo-optim=<yes|no> [default=no]\n\
          Activate faster instrumentation process but unsafe when binary\n\
          mixes llo and vect instructions.\n\
"