Skip to content

Latest commit

 

History

History
46 lines (38 loc) · 2.23 KB

intel_nuc5.md

File metadata and controls

46 lines (38 loc) · 2.23 KB

Intel NUC NUC5i5MYBE {#nuc5}

Pinmuxing on the 5th generation Intel NUCs is done in the BIOS. This is only tested on bios 0024+ (MYBDWi5v.86A). By default the custom solution header is disabled, currently in Linux (as of 4.2). Both i2c buses are currently supported.

The NUCs supported are the NUC5i5MYBE & NUC5i3MYBE which also come as the NUC5i5MYHE and NUC5i3MYHE motherboards. It's possible that others expose the IO in a very similar way so could be supported, get in touch if you have one!

In the BIOS you are required to enable the following: Devices -> Onboard Devices - GPIO Lockdown Select I2c under GPIO for the 12/13 14/15 pins

Interface notes

I2C Depending on your system you may need to load i2c-dev

Custom Solutions Header mapping

The mapping is the same as the DE3815tykhe.

MRAA Number Physical Pin Function Notes
0 1 1.8V sby
1 2 GND
2 3 HDMI_CEC
3 4 DMIC_CLK
4 5 3.3V sby
5 6 DMIC_DATA
6 7 Key (no pin)
7 8 SMB_ALERT#
8 9 5V sby (2A)
9 10 SCI_SMI_GPIO
10 11 PWM[0]
11 12 PWM[1]
12 13 I2C0_CLK /dev/i2c-0 SCL
13 14 I2C0_DATA /dev/i2c-0 SDA
14 15 I2C1_CLK /dev/i2c-1 SCL
15 16 I2C1_DATA /dev/i2c-1-SDA
16 17 SMB_CLK
17 18 SMB_DATA