error msg: bcm2708-rng -- Failed to find module 'bcm2708_rng'

[tswaehn]

I do have

• stretch 32bit @ RPI 3b+

I am getting this Failed to find module 'bcm2708_rng' when booting.

As far as I understand the bcm2708-rng is depricated and replaced by bcm2835_rng. However it gets somehow pulled in. Right now I dont have any clue, to get rid of this.

https://archlinuxarm.org/forum/viewtopic.php?f=64&t=10153

[g-vidal]

HI I am wondering if it is the same problem than #209 and #202 the bootstrapping does not retrieve the up-to-date binaries from raspberrypi/linux.
It seems that on the site the files with new numbers are avalable and are not catched.

[matyapiro31]

You can remove it by editing /lib/modules-load.d/rpi2.conf.

[burnbabyburn]

We should be fine with just the dtb overlays and options nowaydays. Have to test, espacially with older releases
https://www.raspberrypi.org/forums/viewtopic.php?t=98318
https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README