The Knora base ontology is the main built-in Knora ontology. Each project that uses DSP-API must describe its data model by creating ontologies that extend this ontology.
The Knora base ontology is identified by the IRI
http://www.knora.org/ontology/knora-base
. In the DSP-API documentation
in general, it is identified by the prefix knora-base
, but for
brevity, in this document, we use kb
or omit the prefix entirely.
The Knora data model is based on the observation that, in the
humanities, a value or literal is often itself structured and can be
highly complex. Moreover, a value may have its own metadata, such as its
creation date, information about permissions, and so on. Therefore, the
Knora base ontology describes structured value types that can store this
type of metadata. In the diagram below, a book (ex:book2
) has a title
(identified by the predicate ex:title
) and a publication date
(ex:pubdate
), each of which has some metadata.
In Knora, each item of data belongs to some particular project. Each
project using Knora must define a kb:knoraProject
, which has these
properties (cardinalities are indicated in parentheses after each
property name):
projectShortname
(1)
: A short name that can be used to identify the project in configuration files and the like.
projectLongname
(1)
: The full name of the project.
projectShortcode
(1)
: A hexadecimal code that uniquely identifies the project. These codes are assigned to projects by the DaSCH.
projectDescription
(1-n)
: A description of the project.
belongsToInstitution
(0-1)
: The kb:Institution
that the project belongs to.
Ontologies and resources are associated with a project by means of the
kb:attachedToProject
property, as described in Ontologies
and Properties of Resource). Users are associated with a project by
means of the kb:isInProject
property, as described in
Users and Groups.
Each user-created ontology must be defined as an owl:Ontology
with the
properties rdfs:label
and kb:attachedToProject
.
All the content produced by a project (e.g. digitised primary source
materials or research data) must be stored in objects that belong to
subclasses of kb:Resource
, so that Knora can query and
update that content. Each project using the Knora base ontology must
define its own OWL classes, derived from kb:Resource
, to represent the
types of data it deals with. A subclass of kb:Resource
may
additionally be a subclass of any other class, e.g. an industry-standard
class such as foaf:Person
; this can facilitate searches across
projects.
Resources have properties that point to different parts of the content
they contain. For example, a resource representing a book could have a
property called hasAuthor
, pointing to the author of the book. There
are two possible kinds of content in a Knora resource: Knora values (see
Values) or links to other resources (see
Links Between Resources). Properties that point to Knora values
must be subproperties of kb:hasValue
, and properties that point to
other resources must be subproperties of kb:hasLinkTo
. Either of these
two types of properties may also be a subproperty of any other property,
e.g. an industry-standard property such as foaf:name
; this can
facilitate searches across projects. Each property definition must
specify the types that its subjects and objects must belong to (see
Constraints on the Types of Property Subjects and Objects for details).
Each user-created resource class definition must use OWL cardinality restrictions to specify the properties that resources of that class can have (see OWL Cardinalities for details).
Resources are not versioned; only their values are versioned (see Values).
Every resource is required to have an rdfs:label
. The object of this
property is an xsd:string
, rather than a Knora value; hence it is not
versioned. A user who has modify permission on a resource (see
Authorisation) can change its label.
A resource can be marked as deleted; Knora does this by
adding the predicate kb:isDeleted true
to the resource. An optional
kb:deleteComment
may be added to explain why the resource has been
marked as deleted. Deleted resources are normally hidden. They cannot be
undeleted, because even though resources are not versioned, it is
necessary to be able to find out when a resource was deleted. If
desired, a new resource can be created by copying data from a deleted
resource.
creationDate
(1)
: The time when the resource was created.
attachedToUser
(1)
: The user who owns the resource.
attachedToProject
(1)
: The project that the resource is part of.
lastModificationDate
(0-1)
: A timestamp indicating when the resource (or one of its values) was last modified.
seqnum
(0-1)
: The sequence number of the resource, if it is part of an ordered group of resources, such as the pages in a book.
isDeleted
(1)
: Indicates whether the resource has been deleted.
deleteDate
(0-1)
: If the resource has been deleted, indicates when it was deleted.
deleteComment
(0-1)
: If the resource has been deleted, indicates why it was deleted.
Resources can have properties that point to other resources; see Links Between Resources. A resource grants permissions to groups of users; see Authorisation.
It is not practical to store all data in RDF. In particular, RDF is not
a good storage medium for binary data such as images. Therefore, Knora
stores such data outside the triplestore, in ordinary files. A resource
can have metadata about a file attached to it. The technical term for such a
resource in Knora is a Representation. For each file, there is a
kb:FileValue
in the triplestore containing metadata about the file
(see FileValue). Knora uses Sipi
to store files. The Knora APIs provide ways
to create file values using Knora and Sipi.
A resource that has a file value must belong to one of the subclasses of
kb:Representation
. Its subclasses include:
StillImageRepresentation
: A representation containing a still image file.
MovingImageRepresentation
: A representation containing a video file.
AudioRepresentation
: A representation containing an audio file.
DDDrepresentation
: A representation containing a 3D image file.
TextRepresentation
: A representation containing a formatted text file, such as an XML file.
DocumentRepresentation
: A representation containing a document (such as a PDF file) that is not a text file.
These classes can be used directly in data, but it is often better to make subclasses of them, to include metadata about the files being stored.
The base class of all these classes is Representation
, which is not intended to
be used directly. It has this property, which its subclasses override:
hasFileValue
(1)
: Points to a file value.
There are two ways for a project to design classes for representations.
The simpler way is to create a resource class that represents a thing in
the world (such as ex:Painting
) and also belongs to a subclass of
Representation
. This is adequate if the class can have only one type
of file attached to it. For example, if paintings are represented only
by still images, ex:Painting
could be a subclass of
StillImageRepresentation
. This is the only approach supported in
DSP-API v1.
The more flexible approach, which is supported by DSP-API
v2, is for each ex:Painting
to link (using
kb:hasRepresentation
or a subproperty) to other resources containing files
that represent the painting. Each of these other resources can extend a
different subclass of Representation
. For example, a painting could have a
StillImageRepresentation
as well as a DDDrepresentation
.
In general, each project using Knora must define its own subclasses of
kb:Resource
. However, the Knora base ontology provides some standard
subclasses of kb:Resource
, which are intended to be used by any
project:
Region
: Represents a region of a Representation
(see
Representations).
Annotation
: Represents an annotation of a resource. The hasComment
property
points to the text of the annotation, represented as a
kb:TextValue
.
LinkObj
: Represents a link that connects two or more resources. A LinkObj
has a hasLinkTo
property pointing to each resource that it
connects, as well as a hasLinkToValue
property pointing to a
reification of each of these direct links (see
Links Between Resources). A LinkObj
is more complex (and
hence less convenient and readable) than a simple direct link, but
it has the advantage that it can be annotated using an Annotation
.
For improved readability, a project can make its own subclasses of
LinkObj
with specific meanings.
The Knora base ontology defines a set of OWL classes that are derived
from kb:Value
and represent different types of structured values found
in humanities data. This set of classes may not be extended by
user-created ontologies.
A value is always part of one particular resource, which points to it
using some property derived from hasValue
. For example, a
user-created ontology could specify a Book
class with a property
hasSummary
(derived from hasValue
), and that property could have a
knora-base:objectClassConstraint
of TextValue
. This would mean that
the summary of each book is represented as a TextValue
.
Knora values are versioned. Existing values are not modified. Instead, a
new version of an existing value is created. The new version is linked
to the old version via the previousValue
property.
Since each value version has a different IRI, there is no IRI that can
be used to cite the value, such that it will always refer to the latest
version of the value. Therefore, the latest version of each value has
a separate UUID, as the object of the property valueHasUUID
. When
a new version of the value is created, this UUID is moved to the new
version. This makes it possible to cite the latest version of a value
by searching for the UUID.
"Deleting" a value means marking it with kb:isDeleted
. An optional
kb:deleteComment
may be added to explain why the value has been marked
as deleted. Deleted values are normally hidden.
Most types of values are marked as deleted without creating a new
version of the value. However, link values must be treated as a special
case. Before a LinkValue
can be marked as deleted, its reference count
must be decremented to 0. Therefore, a new version of the LinkValue
is
made, with a reference count of 0, and it is this new version that is
marked as deleted.
To simplify the enforcement of ontology constraints, and for consistency with resource updates, no new versions of a deleted value can be made; it is not possible to undelete. Instead, if desired, a new value can be created by copying data from a deleted value.
valueCreationDate
(1)
: The date and time when the value was created.
attachedToUser
(1)
: The user who owns the value.
valueHasString
(1)
: A human-readable string representation of the value's contents, which is available to Knora's full-text search index.
valueHasOrder
(0-1)
: A resource may have several properties of the same type with
different values (which will be of the same class), and it may be
necessary to indicate an order in which these values occur. For
example, a book may have several authors which should appear in a
defined order. Hence, valueHasOrder
, when present, points to an
integer literal indicating the order of a given value relative to
the other values of the same property. These integers will not
necessarily start at any particular number, and will not necessarily
be consecutive.
previousValue
(0-1)
: The previous version of the value.
valueHasUUID
(0-1)
: The UUID that refers to all versions of the value. Only the latest version of the value has this property.
isDeleted
(1)
: Indicates whether the value has been deleted.
deleteDate
(0-1)
: If the value has been deleted, indicates when it was deleted.
deleteComment
(0-1)
: If the value has been deleted, indicates why it was deleted.
Each Knora value can grant permissions (see Authorisation).
Represents text, possibly including markup. The text is the object of
the valueHasString
property. A line break is represented as a Unicode
line feed character (U+000A
). The non-printing Unicode character
INFORMATION SEPARATOR TWO (U+001E)
can be used to separate words that
are separated only by standoff markup (see below), so they are
recognised as separate in a full-text search index.
Markup is stored using this property:
valueHasStandoff
(0-n)
: Points to a standoff markup tag. See Text with Standoff Markup.
valueHasMapping
(0-1)
: Points to the mapping used to create the standoff markup and to convert it back to the original XML. See Mapping to Create Standoff From XML.
A text value can have a specified language:
valueHasLanguage
(0-1)
: is an ISO 639-1 code as string specifying the language of the text.
Humanities data includes many different types of dates. In Knora, a date
has a specified calendar, and is always represented as a period with
start and end points (which may be equal), each of which has a precision
(DAY
, MONTH
, or YEAR
). For GREGORIAN
and JULIAN
calendars, an
optional ERA
indicator term (BCE
, CE
, or BC
, AD
) can be added
to the date, when no era is provided the default era AD
will be considered.
Internally, the start and end points are stored as two Julian Day Numbers.
This calendar-independent representation makes it possible to compare
and search for dates regardless of the calendar in which they were entered.
Properties:
valueHasCalendar
(1)
: The name of the calendar in which the date should be displayed.
Currently GREGORIAN
, JULIAN
, and ISLAMIC
civil calendars are supported.
valueHasStartJDN
(1)
: The Julian Day Number of the start of the period (an xsd:integer
).
valueHasStartPrecision
(1)
: The precision of the start of the period.
valueHasEndJDN
(1)
: The Julian Day Number of the end of the period (an xsd:integer
).
valueHasEndPrecision
(1)
: The precision of the end of the period.
A Knora time value represents a precise moment in time in the Gregorian calendar. Since nanosecond precision can be included, it is suitable for use as a timestamp. Properties:
valueHasTimeStamp
(1)
: An xsd:dateTimeStamp
, stored as an xsd:dateTime
(because SPARQL
does not support xsd:dateTimeStamp
).
Represents an integer. Property:
valueHasInteger
(1)
: An xsd:integer
.
valueHasColor
(1)
: A string representing a color. The string encodes a color as hexadecimal RGB values, e.g. "#FF0000".
Represents an arbitrary-precision decimal number. Property:
valueHasDecimal
(1)
: An xsd:decimal
.
Represents a non-Knora URI. Property:
valueHasUri
(1)
: An xsd:anyURI
.
Represents a boolean value. Property:
valueHasBoolean
(1)
: An xsd:boolean
.
Represents a geometrical object as a JSON string, using normalized coordinates. Property:
valueHasGeometry
(1)
: A JSON string.
Represents a geolocation, using the identifiers found at GeoNames. Property:
valueHasGeonameCode
(1)
: the identifier of a geographical feature from
GeoNames, represented as an xsd:string
.
Represents a time interval, with precise start and end times on a timeline, e.g. relative to the beginning of an audio or video file. Properties:
valueHasIntervalStart
(1)
: An xsd:decimal
representing the start of the interval in seconds.
valueHasIntervalEnd
(1)
: An xsd:decimal
representing the end of the interval in seconds.
Projects often need to define lists or hierarchies of categories that
can be assigned to many different resources. Then, for example, a user
interface can provide a drop-down menu to allow the user to assign a
category to a resource. The ListValue
class provides a way to
represent these sorts of data structures. It can represent either a flat
list or a tree.
A ListValue
has this property:
valueHasListNode
(1)
: Points to a ListNode
.
Each ListNode
can have the following properties:
isRootNode
(0-1)
: Set to true
if this is the root node.
hasSubListNode
(0-n)
: Points to the node's child nodes, if any.
hasRootNode
(0-1)
: Points to the root node of the list (absent if isRootNode
is
true
).
listNodePosition
(0-1)
: An integer indicating the node's position in the list of its
siblings (absent if isRootNode
is true
).
listNodeName
(0-1)
: The node's human-readable name (absent if isRootNode
is true
).
Knora stores certain kinds of data outside the triplestore, in files
(see Representations). Each digital object that
is stored outside the triplestore has associated metadata, which is
stored in the triplestore in a kb:FileValue
. The base class
FileValue
, which is not intended to be used directly, has these
properties:
internalFilename
(1)
: The name of the file as stored by Knora.
internalMimeType
(1)
: The MIME type of the file as stored by Knora.
originalFilename
(0-1)
: The original name of the file when it was uploaded to the DSP-API server.
originalMimeType
(0-1)
: The original MIME type of the file when it was uploaded to the Knora API server.
isPreview
(0-1)
: A boolean indicating whether the file is a preview, i.e. a small
image representing the contents of the file. A preview is always a
StillImageFileValue
, regardless of the type of the enclosing
Representation
.
The subclasses of FileValue
, which are intended to be used directly in
data, include:
StillImageFileValue
: Contains metadata about a still image file.
MovingImageFileValue
: Contains metadata about a video file.
AudioFileValue
: Contains metadata about an audio file.
DDDFileValue
: Contains metadata about a 3D image file.
TextFileValue
: Contains metadata about a text file.
DocumentFileValue
: Contains metadata about a document (such as PDF) that is not a text file.
Each of these classes contains properties that are specific to the type of file it describes. For example, still image files have dimensions, video files have frame rates, and so on.
FileValue
objects are versioned like other values, and the actual
files stored by Knora are also versioned. Version 1 of the DSP-API
does not provide a way to retrieve a previous version of a file, but
this feature will be added in a subsequent version of the API.
A LinkValue
is an RDF "reification" containing metadata about a link
between two resources. It is therefore a subclass of rdf:Statement
as
well as of Value
. It has these properties:
rdf:subject
(1)
: The resource that is the source of the link.
rdf:predicate
(1)
: The link property.
rdf:object
(1)
: The resource that is the target of the link.
valueHasRefCount
(1)
: The reference count of the link. This is meaningful when the
LinkValue
describes resource references in Standoff text markup
(see StandoffLinkTag). Otherwise, the
reference count will always be 1 (if the link exists) or 0 (if it
has been deleted).
For details about how links are created in Knora, see Links Between Resources.
Represents a resource that is not stored in the RDF triplestore managed
by Knora, but instead resides in an external repository
managed by some other software. The ExternalResValue
contains the
information that Knora needs in order to access the
resource, assuming that a suitable gateway plugin is installed.
extResAccessInfo
(1)
: The location of the repository containing the external resource (e.g. its URL).
extResId
(1)
: The repository-specific ID of the external resource.
extResProvider
(1)
: The name of the external provider of the resource.
A link between two resources is expressed, first of all, as a triple, in
which the subject is the resource that is the source of the link, the
predicate is a "link property" (a subproperty of kb:hasLinkTo
), and
the object is the resource that is the target of the link.
It is also useful to store metadata about links. For example, Knora
needs to know who owns the link, who has permission to modify it, when
it was created, and so on. Such metadata cannot simply describe the link
property, because then it would refer to that property in general, not
to any particular instance in which that property is used to connect two
particular resources. To attach metadata to a specific link in RDF, it
is necessary to create an RDF "reification". A reification makes
statements about a particular triple (subject, predicate, object), in
this case the triple that expresses the link between the resources.
Knora uses reifications of type kb:LinkValue
(described in
LinkValue to store metadata about links.
For example, suppose a project describes paintings that belong to collections. The project can define an ontology as follows (expressed here in Turtle format, and simplified for the purposes of illustration):
@prefix kb <http://www.knora.org/ontology/knora-base#> .
@prefix : <http://www.knora.org/ontology/paintings#> .
:Painting rdf:type owl:Class ;
rdfs:subClassOf kb:Resource ,
[ rdf:type owl:Restriction ;
owl:onProperty :hasArtist ;
owl:cardinality 1 ] ,
[ rdf:type owl:Restriction ;
owl:onProperty :hasTitle ;
owl:cardinality 1 ] ;
[ rdf:type owl:Restriction ;
owl:onProperty :isInCollection ;
owl:minCardinality 1 ] ;
[ rdf:type owl:Restriction ;
owl:onProperty :isInCollectionValue ;
owl:minCardinality 1 ] .
:Collection rdf:type owl:Class ;
rdfs:subClassOf kb:Resource ,
[ rdf:type owl:Restriction ;
owl:onProperty :hasCollectionName ;
owl:cardinality 1 ] .
:hasArtist rdf:type owl:ObjectProperty ;
rdfs:label "Name of artist" ;
kb:subjectClassConstraint :Painting ;
kb:objectClassConstraint kb:TextValue .
:hasTitle rdf:type owl:ObjectProperty ;
rdfs:label "Title of painting"
kb:subjectClassConstraint :Painting ;
kb:objectClassConstraint kb:TextValue .
:hasCollectionName rdf:type owl:ObjectProperty ;
rdfs:label "Name of collection" ;
kb:subjectClassConstraint :Collection ;
kb:objectClassConstraint kb:TextValue .
To link the paintings to the collection, we must add a "link property"
to the ontology. In this case, the link property will point from a
painting to the collection it belongs to. Every link property must be a
subproperty of kb:hasLinkTo
.
:isInCollection rdf:type owl:ObjectProperty ;
rdfs:subPropertyOf kb:hasLinkTo ;
kb:subjectClassConstraint :Painting ;
kb:objectClassConstraint :Collection .
We must then add a "link value property", which will point from a
painting to a kb:LinkValue
(described in
LinkValue), which will contain metadata about
the link between the property and the collection. In particular, the
link value specifies the creator of the link, the date when it was
created, and the permissions that determine who can view or modify it.
The name of the link value property is constructed using a simple naming
convention: the word Value
is appended to the name of the link
property. In this case, since our link property is called
:isInCollection
, the link value property must be called
:isInCollectionValue
. Every link value property must be a subproperty
of kb:hasLinkToValue
.
:isInCollectionValue rdf:type owl:ObjectProperty ;
rdfs:subPropertyOf kb:hasLinkToValue ;
kb:subjectClassConstraint :Painting ;
kb:objectClassConstraint kb:LinkValue .
Given this ontology, we can create some RDF data describing a painting and a collection:
@prefix paintings <http://www.knora.org/ontology/paintings#> .
@prefix data <http://www.knora.org/ontology/paintings/data#> .
data:dali_4587 rdf:type paintings:Painting ;
paintings:hasTitle data:value_A ;
paintings:hasArtist data:value_B .
data:value_A rdf:type kb:TextValue ;
kb:valueHasString "The Persistence of Memory" .
data:value_B rdf:type kb:TextValue ;
kb:valueHasString "Salvador Dali" .
data:pompidou rdf:type paintings:Collection ;
paintings:hasCollectionName data:value_C .
data:value_C rdf:type kb:TextValue ;
kb:valueHasString "Centre Pompidou, Paris" .
We can then state that the painting is in the collection:
data:dali_4587 paintings:isInCollection data:pompidou ;
paintings:isinCollectionValue data:value_D .
data:value_D rdf:type kb:LinkValue ;
rdf:subject data:dali_4587 ;
rdf:predicate paintings:isInCollection ;
rdf:object data:pompidou ;
kb:valueHasRefCount 1 .
This creates a link (paintings:isInCollection
) between the painting
and the collection, along with a reification containing metadata about
the link. We can visualise the result as the following graph:
Knora allows a user to see a link if the requesting user
has permission to see the source and target resources as well as the
kb:LinkValue
.
Knora is designed to be able to store text with markup, which can indicate formatting and structure, as well as the complex observations involved in transcribing handwritten manuscripts. One popular way of representing text in the humanities is to encode it in XML using the Text Encoding Initiative (TEI) guidelines. In Knora, a TEI/XML document can be stored as a file with attached metadata, but this is not recommended, because it does not allow Knora to perform searches across multiple documents.
The recommended way to store text with markup in Knora is to use Knora's built-in support for "standoff" markup, which is stored separately from the text. This has some advantages over embedded markup such as XML. While XML requires markup to have a hierarchical structure, and does not allow overlapping tags, standoff nodes do not have these limitations (see Using Standoff Properties for Marking-up Historical Documents in the Humanities). A standoff tag can be attached to any substring in the text by giving its start and end positions. Unlike in corpus linguistics, we do not use any tokenisation resulting in a form of predefined segmentation, which would limit the user's ability to freely annotate any ranges in the text.
For example, suppose we have the following text:
This sentence has overlapping visual attributes.This would require just two standoff tags: `(italic, start=5, end=29)` and `(bold, start=14, end=36)`.
Moreover, standoff makes it possible to mark up the same text in different, possibly incompatible ways, allowing for different interpretations without making redundant copies of the text. In the Knora base ontology, any text value can have standoff tags.
By representing standoff as RDF triples, Knora makes markup searchable across multiple text documents in a repository. For example, if a repository contains documents in which references to persons are indicated in standoff, it is straightforward to find all the documents mentioning a particular person. Knora's standoff support is intended to make it possible to convert documents with embedded, hierarchical markup, such as TEI/XML, into RDF standoff and back again, with no data loss, thus bringing the benefits of RDF to existing TEI-encoded documents.
In the Knora base ontology, a TextValue
can have one or more standoff
tags. Each standoff tag indicates the start and end positions of a
substring in the text that has a particular attribute. The OWL class
kb:StandoffTag
, which is the base class of all standoff node classes,
has these properties:
standoffTagHasStart
(1)
: The index of the first character in the text that has the attribute.
standoffTagHasEnd
(1)
: The index of the last character in the text that has the attribute, plus 1.
standoffTagHasUUID
(1)
: A UUID identifying this instance and those corresponding to it in
later versions of the TextValue
it belongs to. The UUID is a means
to maintain a reference to a particular range of a text also when
new versions are made and standoff tag IRIs change.
standoffTagHasOriginalXMLID
(0-1)
: The original id of the XML element that the standoff tag represents, if any.
standoffTagHasStartIndex
(1)
: The start index of the standoff tag. Start indexes are numbered from 0 within the context of a particular text. When several standoff tags share the same start position, they can be nested correctly with this information when transforming them to XML.
standoffTagHasEndIndex
(1)
: The end index of the standoff tag. Start indexes are numbered from 0 within the context of a particular text. When several standoff tags share the same end position, they can be nested correctly with this information when transforming them to XML.
standoffTagHasStartParent
(0-1)
: Points to the parent standoff tag. This corresponds to the original nesting of tags in XML. If a standoff tag has no parent, it represents the XML root element. If the original XML element is a CLIX tag, it represents the start of a virtual (non syntactical) hierarchy.
standoffTagHasEndParent
(0-1)
: Points to the parent standoff tag if the original XML element is a CLIX tag and represents the end of a virtual (non syntactical) hierarchy.
The StandoffTag
class is not used directly in RDF data; instead, its
subclasses are used. A few subclasses are currently provided in
standoff-onto.ttl
, and more will be added to support TEI semantics.
Projects are able to define their own custom standoff tag classes
(direct subclasses of StandoffTag
or one of the standoff data type
classes or subclasses of one of the standoff classes defined in
standoff-onto.ttl
).
Associates data in some Knora value type with a substring in a text.
Standoff data type tags are subclasses of ValueBase
classes.
StandoffLinkTag
Indicates that a substring refers to anotherkb:Resource
. See StandoffLinkTag.StandoffInternalReferenceTag
Indicates that a substring refers to another standoff tag in the same text value. See Internal Links in a TextValue.StandoffUriTag
Indicates that a substring is associated with a URI, which is stored in the same form that is used forkb:UriValue
. See UriValue.StandoffDateTag
Indicates that a substring represents a date, which is stored in the same form that is used forkb:DateValue
. See DateValue.StandoffColorTag
Indicates that a substring represents a color, which is stored in the same form that is used forkb:ColorValue
. See ColorValue.StandoffIntegerTag
Indicates that a substring represents an integer, which is stored in the same form that is used forkb:IntegerValue
. See IntValue.StandoffDecimalTag
Indicates that a substring represents a number with fractions, which is stored in the same form that is used forkb:DecimalValue
. See DecimalValue.StandoffIntervalTag
Indicates that a substring represents an interval, which is stored in the same form that is used forkb:IntervalValue
. See IntervalValue.StandoffBooleanTag
Indicates that a substring represents a Boolean, which is stored in the same form that is used forkb:BooleanValue
. See BooleanValue.StandoffTimeTag
Indicates that a substring represents a timestamp, which is stored in the same form that is used forkb:TimeValue
. See TimeValue.
A StandoffLinkTag
Indicates that a substring is associated with a
Knora resource. For example, if a repository contains resources
representing persons, a text could be marked up so that each time a
person's name is mentioned, a StandoffLinkTag
connects the name to the
Knora resource describing that person. Property:
standoffTagHasLink
(1)
: The IRI of the resource that is referred to.
One of the design goals of the Knora ontology is to make it easy and
efficient to find out which resources contain references to a given
resource. Direct links are easier and more efficient to query than
indirect links. Therefore, when a text value contains a resource
reference in its standoff nodes, Knora automatically
creates a direct link between the containing resource and the target
resource, along with an RDF reification (a kb:LinkValue
) describing
the link, as discussed in Links Between Resources. In this case,
the link property is always kb:hasStandoffLinkTo
, and the link value
property (which points to the LinkValue
) is always
kb:hasStandoffLinkToValue
.
Knora automatically updates direct links and reifications
for standoff resource references when text values are updated. To do
this, it keeps track of the number of text values in each resource that
contain at least one standoff reference to a given target resource. It
stores this number as the reference count of the LinkValue
(see
LinkValue) describing the direct link. Each
time this number changes, it makes a new version of the LinkValue
,
with an updated reference count. When the reference count reaches zero,
it removes the direct link and makes a new version of the LinkValue
,
marked with kb:isDeleted
.
For example, if data:R1
is a resource with a text value in which the
resource data:R2
is referenced, the repository could contain the
following triples:
data:R1 ex:hasComment data:V1 .
data:V1 rdf:type kb:TextValue ;
kb:valueHasString "This link is internal." ;
kb:valueHasStandoff data:SO1 .
data:SO1 rdf:type kb:StandoffLinkTag ;
kb:standoffTagHasStart: 5 ;
kb:standoffTagHasEnd: 9 ;
kb:standoffTagHasLink data:R2 .
data:R1 kb:hasStandoffLinkTo data:R2 .
data:R1 kb:hasStandoffLinkToValue data:LV1 .
data:LV1 rdf:type kb:LinkValue ;
rdf:subject data:R1 ;
rdf:predicate kb:hasStandoffLinkTo ;
rdf:object data:R2 ;
kb:valueHasRefCount 1 .
The result can be visualized like this:
Link values created automatically for resource references in standoff
are visible to all users, and the creator of these link values is always
kb:SystemUser
(see Users and Groups). The
DSP-API server allows a user to see a standoff link if the user has
permission to see the source and target resources.
Internal links in a TextValue
can be represented using the data type
standoff class StandoffInternalReferenceTag
or a subclass of it. It
has the following property:
standoffTagHasInternalReference
(1)
: Points to a StandoffTag
that belongs to the same TextValue
. It
has an objectClassConstraint
of StandoffTag
.
For links to a kb:Resource
, see StandoffLinkTag.
A mapping allows for the conversion of an XML document to RDF-standoff and back. A mapping defines one-to-one relations between XML elements (with or without a class) and attributes and standoff classes and properties (see XML to Standoff Mapping).
A mapping is represented by a kb:XMLToStandoffMapping
which contains
one or more kb:MappingElement
. A kb:MappingElement
maps an XML
element (including attributes) to a standoff class and standoff
properties. It has the following properties:
mappingHasXMLTagname
(1)
: The name of the XML element that is mapped to a standoff class.
mappingHasXMLNamespace
(1)
: The XML namespace of the XML element that is mapped to a standoff
class. If no namespace is given, noNamespace
is used.
mappingHasXMLClass
(1)
: The name of the class of the XML element. If it has no class,
noClass
is used.
mappingHasStandoffClass
(1)
: The standoff class the XML element is mapped to.
mappingHasXMLAttribute
(0-n)
: Maps XML attributes to standoff properties using
MappingXMLAttribute
. See below.
mappingHasStandoffDataTypeClass
(0-1)
: Indicates the standoff data type class of the standoff class the XML element is mapped to.
mappingElementRequiresSeparator
(1)
: Indicates if there should be an invisible word separator inserted after the XML element in the RDF-standoff representation. Once the markup is stripped, text segments that belonged to different elements may be concatenated.
A MappingXMLAttribute
has the following properties:
mappingHasXMLAttributename
: The name of the XML attribute that is mapped to a standoff property.
mappingHasXMLNamespace
: The namespace of the XML attribute that is mapped to a standoff
property. If no namespace is given, noNamespace
is used.
mappingHasStandoffProperty
: The standoff property the XML attribute is mapped to.
Knora includes a standard mapping used by the SALSAH GUI. It has the IRI
http://rdfh.ch/standoff/mappings/StandardMapping
and defines mappings
for a few elements used to write texts with simple markup.
Knora's standoff is designed to make it possible to convert XML documents to standoff and back. One application for this feature is an editing workflow in which an editor works in an XML editor, and the resulting XML documents are converted to standoff and stored in Knora, where they can be searched and annotated.
If an editor wants to correct text that has been imported from XML into standoff, the text can be exported as XML, edited, and imported again. To preserve annotations on standoff tags across edits, each tag can automatically be given a UUID. In a future version of the Knora base ontology, it will be possible to create annotations that point to UUIDs rather than to IRIs. When a text is exported to XML, the UUIDs can be included in the XML. When the edited XML is imported again, it can be converted to new standoff tags with the same UUIDs. Annotations that applied to standoff tags in the previous version of the text will therefore also apply to equivalent tags in the new version.
When text is converted from XML into standoff, tags are also given indexes, which are numbered from 0 within the context of a particular text. This makes it possible to order tags that share the same position, and to preserve the hierarchy of the original XML document. An ordinary, hierarchical XML tag is converted to a standoff tag that has one index, as well as the index of its parent tag, if any. The Knora base ontology also supports non-hierarchical markup such as CLIX, which enables overlapping markup to be represented in XML. When non-hierarchical markup is converted to standoff, both the start position and the end position of the standoff tag have indexes and parent indexes.
To support these features, a standoff tag can have these additional properties:
standoffTagHasStartIndex
(0-1)
: The index of the start position.
standoffTagHasEndIndex
(0-1)
: The index of the end position, if this is a non-hierarchical tag.
standoffTagHasStartParent
(0-1)
: The IRI of the tag, if any, that contains the start position.
standoffTagHasEndParent
(0-1)
: The IRI of the tag, if any, that contains the end position, if this is a non-hierarchical tag.
standoffTagHasUUID
(0-1)
: A UUID that can be used to annotate a standoff tag that may be present in different versions of a text, or in different layers of a text (such as a diplomatic transcription and an edited critical text).
A future version of Knora will provide an API for
querying standoff markup. In the meantime, it is possible to query it
directly in SPARQL. For example, here is a SPARQL query (using RDFS
inference) that finds all the text values texts that have a standoff
date tag referring to Christmas Eve 2016, contained in a
StandoffItalicTag
:
PREFIX knora-base: <http://www.knora.org/ontology/knora-base#>
PREFIX standoff: <http://www.knora.org/ontology/standoff#>
select * where {
?standoffTag a knora-base:StandoffDateTag .
?standoffTag knora-base:valueHasStartJDN ?dateStart .
?standoffTag knora-base:valueHasEndJDN ?dateEnd .
FILTER (2457747 <= ?dateEnd && 2457747 >= ?dateStart)
?standoffTag knora-base:standoffTagHasStartParent ?parent .
?parent a standoff:StandoffItalicTag .
?textValue knora-base:valueHasStandoff ?standoffTag .
?textValue knora-base:valueHasString ?string .
?standoffTag knora-base:standoffTagHasStart ?startPos .
?standoffTag knora-base:standoffTagHasEnd ?endPos .
}
Each Knora user is represented by an object belonging to the class
kb:User
, which is a subclass of foaf:Person
, and has the following
properties:
userid
(1)
: A unique identifier that the user must provide when logging in.
password
(1)
: A cryptographic hash of the user's password.
email
(0-n)
: Email addresses belonging to the user.
isInProject
(0-n)
: Projects that the user is a member of.
isInGroup
(0-n)
: user-created groups that the user is a member of.
foaf:familyName
(1)
: The user's family name.
foaf:givenName
(1)
: The user's given name.
Knora's concept of access control is that an object (a resource or value) can grant permissions to groups of users (but not to individual users). There are several built-in groups:
knora-admin:UnknownUser
: Any user who has not logged into Knora is automatically assigned to this group.
knora-admin:KnownUser
: Any user who has logged into Knora is automatically assigned to this group.
knora-admin:ProjectMember
: When checking a user's permissions on an object, the user is automatically assigned to this group if she is a member of the project that the object belongs to.
knora-admin:Creator
: When checking a user's permissions on an object, the user is automatically assigned to this group if he is the creator of the object.
knora-admin:ProjectAdmin
: When checking a user's permissions on an object, the user is automatically assigned to this group if she is an administrator of the project that the object belongs to.
knora-admin:SystemAdmin
: The group of Knora system administrators.
A user-created ontology can define additional groups, which must
belong to the OWL class knora-admin:UserGroup
.
There is one built-in knora-admin:SystemUser
, which is the creator of link values
created automatically for resource references in standoff markup (see
StandoffLinkTag).
Each resource or value can grant certain permissions to specified
user groups. These permissions are represented as the object of the
predicate kb:hasPermissions
, which is required on every kb:Resource
and on the current version of every kb:Value
. The permissions
attached to the current version of a value also apply to previous
versions of the value. Value versions other than the current one
do not have this predicate.
The following permissions can be granted:
- Restricted view permission (RV) Allows a restricted view of the object, e.g. a view of an image with a watermark.
- View permission (V) Allows an unrestricted view of the object. Having view permission on a resource only affects the user's ability to view information about the resource other than its values. To view a value, she must have view permission on the value itself.
- Modify permission (M) For values, this permission allows a new version of a value to be created. For resources, this allows the user to create a new value (as opposed to a new version of an existing value), or to change information about the resource other than its values. When he wants to make a new version of a value, his permissions on the containing resource are not relevant. However, when he wants to change the target of a link, the old link must be deleted and a new one created, so he needs modify permission on the resource.
- Delete permission (D) Allows the item to be marked as deleted.
- Change rights permission (CR) Allows the permissions granted by the object to be changed.
Each permission in the above list implies all lower-numbered permissions. A user's permission level on a particular object is calculated in the following way:
- Make a list of the groups that the user belongs to, including
Creator
and/orProjectMember
if applicable. - Make a list of the permissions that she can obtain on the object, by iterating over the permissions that the object grants. For each permission, if she is in the specified group, add the specified permission to the list of permissions she can obtain.
- From the resulting list, select the highest-level permission.
- If the result is that she would have no permissions, give her
whatever permission
UnknownUser
would have.
To view a link between resources, a user needs permission to view the
source and target resources. He also needs permission to view the
LinkValue
representing the link, unless the link property is
hasStandoffLinkTo
(see StandoffLinkTag).
The format of the object of kb:hasPermissions
is as follows:
- Each permission is represented by the one-letter or two-letter abbreviation given above.
- Each permission abbreviation is followed by a space, then a comma-separated list of groups that the permission is granted to.
- The IRIs of built-in groups are shortened using the
knora-admin
prefix. - Multiple permissions are separated by a vertical bar (
|
).
For example, if an object grants view permission to unknown and known users, and modify permission to project members, the resulting permission literal would be:
V knora-admin:UnknownUser,knora-admin:KnownUser|M knora-admin:ProjectMember
Knora tries to enforce repository consistency by checking constraints that are specified in the Knora base ontology and in user-created ontologies. Three types of consistency rules are enforced:
- Cardinalities in OWL class definitions must be satisfied.
- Constraints on the types of the subjects and objects of OWL object properties must be satisfied.
- A datatype property may not have an empty string as an object.
The implementation of consistency checking is partly triplestore-dependent; Knora may be able to provide stricter checks with some triplestores than with others.
As noted in Resources, each subclass of
Resource
must use OWL cardinality restrictions to specify the
properties it can have. More specifically, a resource is allowed to have
a property that is a subproperty of kb:hasValue
or kb:hasLinkTo
only
if the resource's class has some cardinality for that property.
Similarly, a value is allowed to have a subproperty of kb:valueHas
only if the value's class has some cardinality for that property.
Knora supports, and attempts to enforce, the following cardinality constraints:
owl:cardinality 1
: A resource of this class must have exactly one instance of the specified property.
owl:minCardinality 1
: A resource of this class must have at least one instance of the specified property.
owl:maxCardinality 1
: A resource of this class may have zero or one instance of the specified property.
owl:minCardinality 0
: A resource of this class may have zero or more instances of the specified property.
Knora requires cardinalities to be defined using blank nodes, as in the
following example from knora-base
:
:Representation rdf:type owl:Class ;
rdfs:subClassOf :Resource ,
[ rdf:type owl:Restriction ;
owl:onProperty :hasFileValue ;
owl:minCardinality "1"^^xsd:nonNegativeInteger ] .
:StillImageRepresentation rdf:type owl:Class ;
rdfs:subClassOf :Representation ,
[ rdf:type owl:Restriction ;
owl:onProperty :hasStillImageFileValue ;
owl:minCardinality "1"^^xsd:nonNegativeInteger ] .
The cardinality of a link property must be the same as the cardinality of the corresponding link value property.
Each owl:Restriction
may have the predicate salsah-gui:guiOrder
to
indicate the order in which properties should be displayed in a GUI
(see The SALSAH GUI Ontology).
A resource class inherits cardinalities from its superclasses. This
follows from the rules of
RDFS inference.
Also, in Knora, cardinalities in the subclass can override cardinalities
that would otherwise be inherited from the superclass. Specifically, if
a superclass has a cardinality on a property P, and a subclass has a
cardinality on a subproperty of P, the subclass's cardinality overrides
the superclass's cardinality. In the example above,
hasStillImageFileValue
is a subproperty of hasFileValue
. Therefore,
the cardinality on hasStillImageFileValue
overrides (i.e. replaces)
the one on hasFileValue
.
Note that, unlike cardinalities, predicates of properties are not
inherited. If :foo rdfs:subPropertyOf :bar
, this does not mean that
:foo
inherits anything from :bar
. Any predicates of :foo
that are
also needed by :bar
must be defined explicitly on :bar
. This design
decision was made because property predicate inheritance is not provided
by RDFS inference, and would make it more difficult to check the
correctness of ontologies, while providing little practical benefit.
For more information about OWL cardinalities, see the OWL 2 Primer.
When a user-created ontology defines a property, it must indicate the types that are allowed as objects (and, if possible, as subjects) of the property. This is done using the following Knora-specific properties:
subjectClassConstraint
: Specifies the class that subjects of the property must belong to. This constraint is recommended but not required. Knora will attempt to enforce this constraint.
objectClassConstraint
: If the property is an object property, specifies the class that
objects of the property must belong to. Every subproperty of
kb:hasValue
or a kb:hasLinkTo
(i.e. every property of a resource
that points to a kb:Value
or to another resource) is required to
have this constraint, because Knora relies on it to
know what type of object to expect for the property. Knora will
attempt to enforce this constraint.
objectDatatypeConstraint
: If the property is a datatype property, specifies the type of literals that can be objects of the property. Knora will not attempt to enforce this constraint, but it is useful for documentation purposes.
Note that it is possible for a subproperty to have a more restrictive contraint than its base property, by specifing a subject or object class that is a subclass of the one specified in the base property. However, it is not possible for the subproperty to make the base property's constraint less restrictive.
See also Why doesn’t Knora use rdfs:domain and rdfs:range for consistency checking?
A user-created ontology could define consistency constraints as in this simplified example:
:book rdf:type owl:Class ;
rdfs:subClassOf knora-base:Resource ,
[ rdf:type owl:Restriction ;
owl:onProperty :hasTitle ;
owl:cardinality "1"^^xsd:nonNegativeInteger ] ,
[ rdf:type owl:Restriction ;
owl:onProperty :hasAuthor ;
owl:minCardinality "0"^^xsd:nonNegativeInteger ] .
:hasTitle rdf:type owl:ObjectProperty ;
knora-base:subjectClassConstraint :book ;
knora-base:objectClassConstraint knora-base:TextValue .
:hasAuthor rdf:type owl:ObjectProperty ;
knora-base:subjectClassConstraint :book ;
knora-base:objectClassConstraint knora-base:TextValue .
An ontology can refer to a Knora ontology in another project only if the other ontology is built-in or shared (see Shared Ontologies).
- Each class must be a subclass of either
kb:Resource
orkb:StandoffTag
, but not both (note that this forbids user-created subclasses ofkb:Value
). - All the cardinalities that a class defines directly (i.e. does not
inherit from
kb:Resource
) must be on properties that are defined in the triplestore. - Within the cardinalities of a class, there must be a link value property for each link property and vice versa.
- The cardinality of a link property must be the same as the cardinality of the corresponding link value property.
- A cardinality on a property with a boolean value must be
owl:cardinality 1
orowl:maxCardinality 1
. - Each class must be a subclass of all the classes that are subject class constraints of the properties in its cardinalities.
- If it's a resource class, all its directly defined cardinalities
must be on Knora resource properties (subproperties of
kb:hasValue
orkb:hasLinkTo
), and all its base classes with Knora IRIs must also be resource classes. A cardinality onkb:resourceProperty
orkb:hasValue
is forbidden. It must also have anrdfs:label
. - If it's a standoff class, none of its cardinalities may be on Knora resource properties, and all its base classes with Knora IRIs must also be standoff classes.
- A class cannot have a cardinality on property P as well as a cardinality on a subproperty of P.
- The property's subject class constraint, if provided, must be a
subclass of
kb:Resource
orkb:StandoffTag
, and must be a subclass of the subject class constraints of all its base properties. - Its object class constraint, if provided, must be a subclass of the object class constraints of all its base properties.
- If the property is a Knora resource property, it must have an object
class constraint and an
rdfs:label
. - It can't be a subproperty of both
kb:hasValue
andkb:hasLinkTo
. - It can't be a subproperty of
kb:hasFileValue
. - Each of its base properties that has a Knora IRI must also be a Knora resource property.
The DaSCH intends to coordinate the standardisation of generally useful entities proposed in user-created ontologies. We envisage a process in which two or more projects would initiate the process by starting a public discussion on proposed entities to be shared. Once a consensus was reached, the DaSCH would publish these entities in a shared ontology).
The Knora base ontology has the property kb:ontologyVersion
, whose
object is a string that indicates the deployed version of all the Knora
built-in ontologies. This allows the
repository update program to determine
which repository updates are needed when Knora is upgraded.