Enabling reverse sensor screen on R-Link 1 #1107
Replies: 15 comments
-
|
yep I think as i said before try here in the MFD settings : (although you do not seem to have Valeo UPA sensors show up in your list of ECUs on your car so that may be a problem
|
Beta Was this translation helpful? Give feedback.
-
|
Yeah that enabled the reversing screen but not the sensors, does anyone else know? |
Beta Was this translation helpful? Give feedback.
-
|
I should imagine the other cars that use the r-link (clio4 , Zoe, later Megane etc) have the parking aid computer in it and then talks to the r-link thats why? |
Beta Was this translation helpful? Give feedback.
-
|
Do they? I got everything required retrofitted, the rear sensors work and you can disable them from the screen. Just don;t know how to enable that display |
Beta Was this translation helpful? Give feedback.
-
|
Those segments only ever light up on the screen when an obstacle is behind the car ...... but you most probably know that already? |
Beta Was this translation helpful? Give feedback.
-
|
Yes, but I want to enable that part, if you look at my photo you'll see the space is there but there's no car |
Beta Was this translation helpful? Give feedback.
-
|
You probably will need another PDC ecu. What's the partnumber of your current PDC ecu? |
Beta Was this translation helpful? Give feedback.
-
|
No don't worry about that it's all there. I just need to find the option to enable it. |
Beta Was this translation helpful? Give feedback.
-
if its all there then the UPA ECU should show up when you do a search with the magnifying glass in DDT4ALL - is it? |
Beta Was this translation helpful? Give feedback.
-
|
Got it working. You do have to fit the newer parking module |
Beta Was this translation helpful? Give feedback.
-
|
@charliehoward @AndyIreland @MellotronScratch Hello, I try to find a camera to mount on my Rlink-1. Can you help me with a link or with some information regarding this? The camera is 6v or 12v? Thank you! |
Beta Was this translation helpful? Give feedback.
-
|
the output from the multi connector on the back of the rlink for the camera is 6v 200ma
|
Beta Was this translation helpful? Give feedback.
-
What settings did you edit to do it? |
Beta Was this translation helpful? Give feedback.
-
|
#836 not bad!! |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
I'm trying to enable this display on R-Link 1, does anyone know where to look?
I've managed to enable the rear camera screen and there's a space for the sensor display
Beta Was this translation helpful? Give feedback.
All reactions