Anyone know why I cannot clear DTC on my BCM/UCH ECU using DDT4ALL? #1081
Replies: 15 comments 33 replies
-
@AndyIreland |
Beta Was this translation helpful? Give feedback.
-
Vgate vLinker FS USB |
Beta Was this translation helpful? Give feedback.
-
thanks @KarelSvo - so if I got a obd2 dongle with a STN110 chip it will work better than the kingbolen and clear all the UCH DTC errors? I cannot see any ones in my DTC error codes then that connect with the DTC error list: D335[5A60] UNDER-INFLATED |
Beta Was this translation helpful? Give feedback.
-
Until the buffer was full, almost only ghost errors that are not relevant to your vehicle were read. An STN interface would read all errors because the buffer is large enough. The error clear command 14FFFF, you didn't send. Useful diagnostics can be done with Pyren and vLinker FS. CLIP DTC filter list from the same UCH, but installed in the Megane III |
Beta Was this translation helpful? Give feedback.
-
your ddt4all DTC log 95321110 @KarelSvo - is that really all my DTC ERROR Codes that are logged though? - because when i check with PyREN it says only 4 'WARN' for the UCH - when I press number1 it just has Q and CLEAR and no errors there. |
Beta Was this translation helpful? Give feedback.
-
FYI : The blue waterpipe icon enables/disables cfc. |
Beta Was this translation helpful? Give feedback.
-
whereabouts? - in options.py is it because I could not see these in options.py when I edit with notepad. |
Beta Was this translation helpful? Give feedback.
-
uses last releases 32bits or 64 all dnat, snat is according projects. |
Beta Was this translation helpful? Give feedback.
-
elm.py compress as zip and attach |
Beta Was this translation helpful? Give feedback.
-
I don't know what the idea is of staying stagnant with py2??? Don't you follow innovation? One of these days they only make Diag Renault 4L (197x) |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
I find a 1 to 1 copy of the vehicle type list from the ddt2000 database not innovative, but rather hindering for the user. 2024-04-20s.mp42024-04-20.mp4 |
Beta Was this translation helpful? Give feedback.
-
I have edited the vehicle type list to make it easier for the user to select the correct vehicle type. You removed the user-friendly vehicle type list in main.py instead of adding it in a meaningful way and inserted the list from ddt2000 including all errors and unneeded vehicle types. I don't find this innovative because it's not user-friendly. I didn't write anything about py2. But I can understand why older user-friendly versions are preferred. I also don't like the renaming of the Demomode button to Edition mode. User-friendliness should take priority over innovation. |
Beta Was this translation helpful? Give feedback.
-
I went out today and tried version 3.0.1 as well as 5.5.9 and tried with the |
Beta Was this translation helpful? Give feedback.
-
Renault Zoe EV
Trying to detect DTC errors gives me this window:
and underneath in the info window:
ELM response : WRONG RESPONSE : Unknown(5902B99532111095E3931095E5931095E7931095E993105A8431105A8496105A8531105A8596105A8331105A8396105A8231105A82961095B00210956123109560241095602310953E1410953F141095401410953B1410953C1410953D14105A8055105A80541095D1181095D01810957B1410957B1210957C14)
Logs:
ecu_ddt 15apr2024.txt
elm_ddt 15apr2024.txt
Beta Was this translation helpful? Give feedback.
All reactions