p00n00b's 2307-badusb- Fatal error when using drivecom

[four2ne]

CMD OUTPUT:
DriveCom.exe* /drive=E /action=SendFirmware /burner=BN07V502TAW.BIN /firmware=fw.bin
Action specified: SendFirmware
Gathering information...
Reported chip type: 2307
Reported chip ID: 00-00-00-00-00-00
Reported firmware version: 1.02.10
Mode: BootMode
Rebooting...
Sending firmware...
FATAL: System.InvalidOperationException: Header not accepted
w DriveCom.PhisonDevice.TransferFile(Byte[] data, Byte header, Byte body)
w DriveCom.Startup._RunFirmware(String fileName)
w DriveCom.Startup._SendFirmware()
w DriveCom.Startup.Main(String[] args)*`

What should i do? I thought i will search for help here. I shorted two pins (bottom pins, 1st & 2nd on the left when the circle is in the upper right corner,) plugged pendrive in, flashed it, then the error came out :(

`USB DRIVE INFO:
Volume: E:
Controller: Phison PS2307
Possible Memory Chip(s):
Hynix H27UCG8T2ETR
Memory Type: MLC
Flash ID: ADDE14A7 424A
Chip F/W: 01.05.10
Firmware Date: 2014-05-23
ID_BLK Ver.: 1.2.71.0
MP Ver.: MPALL v3.31.0C
VID: 0951
PID: 1666
Manufacturer: Kingston
Product: DataTraveler 3.0
Query Vendor ID: Kingston
Query Product ID: DataTraveler 3.0
Query Product Revision: PMAP
Physical Disk Capacity: 15518924800 Bytes
Windows Disk Capacity: 15494807552 Bytes
Internal Tags: 2Q6P-SX5L
File System: FAT32
Relative Offset: 1024 KB
USB Version: 3.00
Declared Power: 504 mA
ContMeas ID: D92E-04-00
Microsoft Windows 10 x64 Build 18363

http://www.antspec.com/usbflashinfo/
Program Version: 9.3.0.630**`