You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I am using a Flywoo F745 FC. When I update to 4.5 RC3 or RC4 (With Bethaflight 10.10 RC4!), I can no longer connect to the FC.I did not tryed RC1 and 2. The update itself seems to be successful. I have tried directly by connecting the FC and then selecting "Update Firmware", and I have tried several times by booting in boot mode first. The error code in the dialogue box after the update is "Failed to open serial port". I have previously installed 4.4.3, which works without any connection problems. To reconnect to the FC, I have to boot in boot mode, otherwise the FC will not be recognised. Then I have to go back to 4.4.3. After that, everything works perfectly again.
To Reproduce
use Flywoo F745 FC. Update to 4.5RC4 or 4.5 RC3. After that try to connect fia "Connect" button.
Expected behavior
I can remember i had the same problem with 4.4 after some while it worked (Mybe in 4.4.1 or 4.4.2).
Support ID
No output could not connect
Flight controller
Flywoo F745
Other components
Flywoo Explorer LR4 with Cognex Vista.
How are the different components wired up (including port information)
original no changings
Add any other context about the problem that you think might be relevant here
No response
The text was updated successfully, but these errors were encountered:
I am having the same issue. Hexplorer with Flywoo745. Initially after the update to 4.5 RC4, I could not connect to DFU either. Desoldering the receiver from UART1 allowed me to connect to DFU and reinstall 4.4.3.
Describe the bug
I am using a Flywoo F745 FC. When I update to 4.5 RC3 or RC4 (With Bethaflight 10.10 RC4!), I can no longer connect to the FC.I did not tryed RC1 and 2. The update itself seems to be successful. I have tried directly by connecting the FC and then selecting "Update Firmware", and I have tried several times by booting in boot mode first. The error code in the dialogue box after the update is "Failed to open serial port". I have previously installed 4.4.3, which works without any connection problems. To reconnect to the FC, I have to boot in boot mode, otherwise the FC will not be recognised. Then I have to go back to 4.4.3. After that, everything works perfectly again.
To Reproduce
use Flywoo F745 FC. Update to 4.5RC4 or 4.5 RC3. After that try to connect fia "Connect" button.
Expected behavior
I can remember i had the same problem with 4.4 after some while it worked (Mybe in 4.4.1 or 4.4.2).
Support ID
Flight controller
Flywoo F745
Other components
Flywoo Explorer LR4 with Cognex Vista.
How are the different components wired up (including port information)
original no changings
Add any other context about the problem that you think might be relevant here
No response
The text was updated successfully, but these errors were encountered: