T80 input recognized in certain modes by evtest, but no functionality in application. #181
Comments
|
My T80 doesn't seem to generate any sequence in evtest for wheel rotation nor for the pedals. |
Try running evtest as root. I can add this wheel if somebody provides me the vendor/product ids. What's the rotation range of the wheel side to side? Also, please, list the events for the pedals, wheel and buttons specifying each. |
|
I will provide the event ID's and other information soon, please expect them in 2-3 hours |
|
The device ID shown in lsusb is 044f:b667. The wheel (ABS_X) seems to range from 0-255 with 128 being the middle position. The left pedal returns code (BTN_TL), and the right pedal returns code (BTN_TR). The value seems to be 1 when down and 0 when up for each. For the input buttons, the input scheme seems to be inconsistent, so I believe that is some kind of poor configuration on my part. In general, they seem to be (BTN_NORTH), (BTN_SOUTH) etc. but for some reason the pedal is (BTN_WEST) and the R3 button is labeled (BTN_START), so I'm hesitant to provide those codes as what the wheel uses universally. I hope this helps! (also, it shouldn't make a difference, but I am using arch and the AUR version of the package.) |
|
The naming of the button events may not match their use. There's nothing wrong. Which pedal is BTN_WEST? I will need the complete list. |
|
Okay, I will provide all of them soon.
…On Mon, Mar 11, 2024 at 4:15 AM Bernat ***@***.***> wrote:
The naming of the button events may not match their use. There's nothing
wrong.
Which pedal is BTN_WEST? I will need the complete list.
—
Reply to this email directly, view it on GitHub
<#181 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUZNOUD43NXFVOQPXHCR73TYXVRZVAVCNFSM6AAAAABCRPGMC2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXHA2DEMRZHE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
HI All, /dev/input/event6: Thrustmaster Thrustmaster T80 How can I help to make the wheel and the pedals generate something? |
I see some axes in the output: RX, RY and HAT0X. It seems these are two different devices with ids b667 and b668. |
|
Can someone help which way to go in order to elicit something from T80 device on pedal and wheel rotation? |
|
Try to switch to PS3 mode, and if you can’t see it in evtest, try xev.
…On Thu, Mar 21, 2024 at 6:32 PM TorokLev ***@***.***> wrote:
Can someone help which way to go in order to elicit something from T80
device on pedal and wheel rotation?
—
Reply to this email directly, view it on GitHub
<#181 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUZNOUHLPWU5CAS5DPBVG33YZNNWVAVCNFSM6AAAAABCRPGMC2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJTHE3DIOBYGE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
xev doesn't show anything. Completely silent. |
|
Try to find a switch on the left side of the wheel housing. It should be labeled to let you switch between PS3 and PS4 mode. Once in PS3 mode, I believe my USB device ID changed and and allowed me to detect wheel movement with evtest. The pedals also should support more than on and off, but I cannot detect those currently. I've been very busy but I should be able to provide the missing values soon. |
|
OK. I have found a video of another T80. |
|
T80 PS3Mode Neutral to leftNeutral to rightPedals, sadly just on and offAccelerator Brake |
berarma
added
good first issue
Sorry for initially posting on an old issue, I am brand new to github. Running evtest I see my wheel and get the following output:
The values seem to range from 0-255, and I've been trying to work with the code to make it detect this, but I'm new (both to github & programming) and struggling. In oversteer, everything other than HAT functionality seems to be broken. Since there's input from evtest, could it be used by oversteer?
The text was updated successfully, but these errors were encountered: