DragonFly BSD support

[mcuee]

There is a patch from DragonFly BSD to support avrdude 7.1 with ther DPorts system.

https://github.com/DragonFlyBSD/DPorts/tree/master/devel/avrdude

--- CMakeLists.txt.orig	2023-01-08 21:28:14 UTC
+++ CMakeLists.txt
@@ -159,7 +159,7 @@ if(HAVE_LIBUSB_1_0)
 endif()
 
 # FreeBSD's library 'libusb' supports both the libusb-0.1 and libusb-1.0 API.
-if (HAVE_LIBUSB AND CMAKE_SYSTEM_NAME STREQUAL "FreeBSD")
+if (HAVE_LIBUSB AND CMAKE_SYSTEM_NAME MATCHES "FreeBSD|DragonFly")
     set(HAVE_LIBUSB_1_0 ${HAVE_LIBUSB})
 endif()

This patch makes sense. However, even with the patch, I still have issues building avrdude under DragonFly BSD, after installation of the dependencies. It would be good to fix this.

mcuee@dragonfly622vm:~/build/avrdude % git diff
diff --git a/CMakeLists.txt b/CMakeLists.txt
index bde9304b..58735422 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -163,7 +163,7 @@ if(HAVE_LIBUSB_1_0)
 endif()

 # FreeBSD's library 'libusb' supports both the libusb-0.1 and libusb-1.0 API.
-if (HAVE_LIBUSB AND CMAKE_SYSTEM_NAME STREQUAL "FreeBSD")
+if (HAVE_LIBUSB AND CMAKE_SYSTEM_NAME STREQUAL "FreeBSD|DragonFly")
     set(HAVE_LIBUSB_1_0 ${HAVE_LIBUSB})
 endif()

mcuee@dragonfly622vm:~/build/avrdude % ./build.sh
-- The C compiler identification is GNU 8.3.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Git: /usr/local/bin/git (found version "2.35.2")
-- Found FLEX: /usr/bin/flex (found version "2.6.4")
-- Found BISON: /usr/local/bin/bison (found version "3.8.2")
-- Looking for libelf.h
-- Looking for libelf.h - not found
-- Looking for libelf/libelf.h
-- Looking for libelf/libelf.h - not found
-- Looking for usb.h
-- Looking for usb.h - found
-- Looking for lusb0_usb.h
-- Looking for lusb0_usb.h - not found
-- Looking for libusb.h
-- Looking for libusb.h - found
-- Looking for libusb-1.0/libusb.h
-- Looking for libusb-1.0/libusb.h - not found
-- Looking for hidapi/hidapi.h
-- Looking for hidapi/hidapi.h - not found
-- Looking for ftdi_tcioflush
-- Looking for ftdi_tcioflush - not found
-- Configuration summary:
-- ----------------------
-- DO HAVE    libelf
-- DO HAVE    libusb
-- DON'T HAVE libusb_1_0
-- DO HAVE    libhidapi
-- DO HAVE    libftdi (but prefer to use libftdi1)
-- DO HAVE    libftdi1
-- DO HAVE    libreadline
-- DO HAVE    libserialport
-- DISABLED   doc
-- DISABLED   parport
-- DISABLED   linuxgpio
-- DISABLED   linuxspi
-- ----------------------
-- Configuring done
-- Generating done
-- Build files have been written to: /home/mcuee/build/avrdude/build_dragonfly
[  1%] Generating avrdude.conf
[  1%] Built target conf
[  2%] [BISON][Parser] Building parser with bison 3.8.2
[  3%] [FLEX][Parser] Building scanner with flex 2.6.4
[  5%] Building C object src/CMakeFiles/libavrdude.dir/arduino.c.o
[  6%] Building C object src/CMakeFiles/libavrdude.dir/avr.c.o
[  7%] Building C object src/CMakeFiles/libavrdude.dir/avr910.c.o
[  9%] Building C object src/CMakeFiles/libavrdude.dir/avrcache.c.o
[ 10%] Building C object src/CMakeFiles/libavrdude.dir/avrftdi.c.o
In file included from /home/mcuee/build/avrdude/src/avrftdi.c:42:
/home/mcuee/build/avrdude/src/avrftdi_private.h:16:10: fatal error: ftdi.h: No such file or directory
 #include <ftdi.h>
          ^~~~~~~~
compilation terminated.
*** Error code 1

Stop.
make[2]: stopped in /home/mcuee/build/avrdude/build_dragonfly
*** Error code 1

Stop.
make[1]: stopped in /home/mcuee/build/avrdude/build_dragonfly
*** Error code 1

Stop.
make: stopped in /home/mcuee/build/avrdude/build_dragonfly
Build failed.

[mcuee]

The problem seems to be related to the detection of libusb-1.0 which causes issue with libftdi.

-- DON'T HAVE libusb_1_0

[mcuee]

I will try out DragonFly BSD 6.4 version later.

Anyway, this should not block avrdude 7.3 release.

[mcuee]

Dragon BSD 6.2.2 comes with avrdude 7.0. It does not seem to support HIDAPI. And of course there is no libserialport support in avrdude 7.0 version.

mcuee@dragonfly622vm:~ % avrdude
Usage: avrdude [options]
Options:
  -p <partno>                Required. Specify AVR device.
  -b <baudrate>              Override RS-232 baud rate.
  -B <bitclock>              Specify JTAG/STK500v2 bit clock period (us).
  -C <config-file>           Specify location of configuration file.
  -c <programmer>            Specify programmer type.
  -D                         Disable auto erase for flash memory
  -i <delay>                 ISP Clock Delay [in microseconds]
  -P <port>                  Specify connection port.
  -F                         Override invalid signature check.
  -e                         Perform a chip erase.
  -O                         Perform RC oscillator calibration (see AVR053).
  -U <memtype>:r|w|v:<filename>[:format]
                             Memory operation specification.
                             Multiple -U options are allowed, each request
                             is performed in the order specified.
  -n                         Do not write anything to the device.
  -V                         Do not verify.
  -t                         Enter terminal mode.
  -E <exitspec>[,<exitspec>] List programmer exit specifications.
  -x <extended_param>        Pass <extended_param> to programmer.
  -v                         Verbose output. -v -v for more.
  -q                         Quell progress output. -q -q for less.
  -l logfile                 Use logfile rather than stderr for diagnostics.
  -?                         Display this usage.

avrdude version 7.0, URL: <https://github.com/avrdudes/avrdude>

mcuee@dragonfly622vm:~ % ldd /usr/local/bin/avrdude
/usr/local/bin/avrdude:
        libm.so.4 => /lib/libm.so.4 (0x8006cf000)
        libusb.so.2 => /usr/lib/libusb.so.2 (0x8008fa000)
        libftdi1.so.2 => /usr/local/lib/libftdi1.so.2 (0x8004c2000)
        libreadline.so.8 => /usr/local/lib/libreadline.so.8 (0x8004d0000)
        libc.so.8 => /lib/libc.so.8 (0x800b0c000)
        libpthread.so.0 => /usr/lib/libpthread.so.0 (0x800e69000)
        libncurses.so.6 => /usr/local/lib/libncurses.so.6 (0x800527000)
        libtinfo.so.6 => /usr/local/lib/libtinfo.so.6 (0x800562000)

[mcuee]

Interestingly I have no issues building avrdude git main under DragonFly BSD 6.4 version (latest release). However the version does not seem to be correct. I will try again later.

libftdi support wil still not work due to the detection issue of libusb-1.0.

mcuee@dragonflybsdvm:~/build/avrdude % ./build.sh
-- The C compiler identification is GNU 8.3.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Git: /usr/local/bin/git (found version "2.41.0")
-- Found FLEX: /usr/bin/flex (found version "2.6.4")
-- Found BISON: /usr/local/bin/bison (found version "3.8.2")
-- Looking for libelf.h
-- Looking for libelf.h - not found
-- Looking for libelf/libelf.h
-- Looking for libelf/libelf.h - not found
-- Looking for usb.h
-- Looking for usb.h - found
-- Looking for lusb0_usb.h
-- Looking for lusb0_usb.h - not found
-- Looking for libusb.h
-- Looking for libusb.h - found
-- Looking for libusb-1.0/libusb.h
-- Looking for libusb-1.0/libusb.h - not found
-- Looking for hidapi/hidapi.h
-- Looking for hidapi/hidapi.h - not found
-- Looking for ftdi_tcioflush
-- Looking for ftdi_tcioflush - not found
-- Configuration summary:
-- ----------------------
-- DO HAVE    libelf
-- DO HAVE    libusb
-- DON'T HAVE libusb_1_0
-- DO HAVE    libhidapi
-- DO HAVE    libftdi (but prefer to use libftdi1)
-- DO HAVE    libftdi1
-- DO HAVE    libreadline
-- DO HAVE    libserialport
-- DISABLED   doc
-- DISABLED   parport
-- DISABLED   linuxgpio
-- DISABLED   linuxspi
-- ----------------------
-- Configuring done (0.8s)
-- Generating done (0.0s)
-- Build files have been written to: /home/mcuee/build/avrdude/build_dragonfly
[  1%] Generating avrdude.conf
[  1%] Built target conf
[  2%] [FLEX][Parser] Building scanner with flex 2.6.4
[  3%] [BISON][Parser] Building parser with bison 3.8.2
[  5%] Building C object src/CMakeFiles/libavrdude.dir/arduino.c.o
[  6%] Building C object src/CMakeFiles/libavrdude.dir/avr.c.o
[  7%] Building C object src/CMakeFiles/libavrdude.dir/avr910.c.o
[  9%] Building C object src/CMakeFiles/libavrdude.dir/avrcache.c.o
[ 10%] Building C object src/CMakeFiles/libavrdude.dir/avrftdi.c.o
In file included from /home/mcuee/build/avrdude/src/avrftdi.c:42:
/home/mcuee/build/avrdude/src/avrftdi_private.h:22:2: warning: #warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again. [-Wcpp]
 #warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again.
  ^~~~~~~
[ 11%] Building C object src/CMakeFiles/libavrdude.dir/avrftdi_tpi.c.o
In file included from /home/mcuee/build/avrdude/src/avrftdi_tpi.c:14:
/home/mcuee/build/avrdude/src/avrftdi_private.h:22:2: warning: #warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again. [-Wcpp]
 #warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again.
  ^~~~~~~
[ 13%] Building C object src/CMakeFiles/libavrdude.dir/avrintel.c.o
[ 14%] Building C object src/CMakeFiles/libavrdude.dir/avrpart.c.o
[ 15%] Building C object src/CMakeFiles/libavrdude.dir/bitbang.c.o
[ 17%] Building C object src/CMakeFiles/libavrdude.dir/buspirate.c.o
[ 18%] Building C object src/CMakeFiles/libavrdude.dir/butterfly.c.o
[ 19%] Building C object src/CMakeFiles/libavrdude.dir/ch341a.c.o
[ 21%] Building C object src/CMakeFiles/libavrdude.dir/config.c.o
[ 22%] Building C object src/CMakeFiles/libavrdude.dir/confwin.c.o
[ 23%] Building C object src/CMakeFiles/libavrdude.dir/crc16.c.o
[ 25%] Building C object src/CMakeFiles/libavrdude.dir/dfu.c.o
[ 26%] Building C object src/CMakeFiles/libavrdude.dir/dryrun.c.o
[ 27%] Building C object src/CMakeFiles/libavrdude.dir/fileio.c.o
[ 28%] Building C object src/CMakeFiles/libavrdude.dir/flip1.c.o
[ 30%] Building C object src/CMakeFiles/libavrdude.dir/flip2.c.o
[ 31%] Building C object src/CMakeFiles/libavrdude.dir/ft245r.c.o
/home/mcuee/build/avrdude/src/ft245r.c:89:2: warning: #warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again. [-Wcpp]
 #warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again.
  ^~~~~~~
[ 32%] Building C object src/CMakeFiles/libavrdude.dir/jtagmkI.c.o
[ 34%] Building C object src/CMakeFiles/libavrdude.dir/jtagmkII.c.o
[ 35%] Building C object src/CMakeFiles/libavrdude.dir/jtag3.c.o
[ 36%] Building C object src/CMakeFiles/libavrdude.dir/leds.c.o
[ 38%] Building C object src/CMakeFiles/libavrdude.dir/linuxgpio.c.o
[ 39%] Building C object src/CMakeFiles/libavrdude.dir/linuxspi.c.o
[ 40%] Building C object src/CMakeFiles/libavrdude.dir/lists.c.o
[ 42%] Building C object src/CMakeFiles/libavrdude.dir/micronucleus.c.o
[ 43%] Building C object src/CMakeFiles/libavrdude.dir/par.c.o
[ 44%] Building C object src/CMakeFiles/libavrdude.dir/pgm.c.o
[ 46%] Building C object src/CMakeFiles/libavrdude.dir/pgm_type.c.o
[ 47%] Building C object src/CMakeFiles/libavrdude.dir/pickit2.c.o
[ 48%] Building C object src/CMakeFiles/libavrdude.dir/pindefs.c.o
[ 50%] Building C object src/CMakeFiles/libavrdude.dir/ppi.c.o
[ 51%] Building C object src/CMakeFiles/libavrdude.dir/ppiwin.c.o
[ 52%] Building C object src/CMakeFiles/libavrdude.dir/serbb_posix.c.o
[ 53%] Building C object src/CMakeFiles/libavrdude.dir/serbb_win32.c.o
[ 55%] Building C object src/CMakeFiles/libavrdude.dir/ser_avrdoper.c.o
[ 56%] Building C object src/CMakeFiles/libavrdude.dir/ser_posix.c.o
[ 57%] Building C object src/CMakeFiles/libavrdude.dir/ser_win32.c.o
[ 59%] Building C object src/CMakeFiles/libavrdude.dir/serialadapter.c.o
[ 60%] Building C object src/CMakeFiles/libavrdude.dir/serialupdi.c.o
[ 61%] Building C object src/CMakeFiles/libavrdude.dir/stk500.c.o
[ 63%] Building C object src/CMakeFiles/libavrdude.dir/stk500v2.c.o
[ 64%] Building C object src/CMakeFiles/libavrdude.dir/stk500generic.c.o
[ 65%] Building C object src/CMakeFiles/libavrdude.dir/strutil.c.o
[ 67%] Building C object src/CMakeFiles/libavrdude.dir/teensy.c.o
[ 68%] Building C object src/CMakeFiles/libavrdude.dir/term.c.o
[ 69%] Building C object src/CMakeFiles/libavrdude.dir/updi_link.c.o
[ 71%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm.c.o
[ 72%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm_v0.c.o
[ 73%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm_v2.c.o
[ 75%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm_v3.c.o
[ 76%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm_v4.c.o
[ 77%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm_v5.c.o
[ 78%] Building C object src/CMakeFiles/libavrdude.dir/updi_readwrite.c.o
[ 80%] Building C object src/CMakeFiles/libavrdude.dir/updi_state.c.o
[ 81%] Building C object src/CMakeFiles/libavrdude.dir/urclock.c.o
[ 82%] Building C object src/CMakeFiles/libavrdude.dir/usbasp.c.o
[ 84%] Building C object src/CMakeFiles/libavrdude.dir/usb_hidapi.c.o
[ 85%] Building C object src/CMakeFiles/libavrdude.dir/usb_libusb.c.o
[ 86%] Building C object src/CMakeFiles/libavrdude.dir/usbtiny.c.o
[ 88%] Building C object src/CMakeFiles/libavrdude.dir/update.c.o
[ 89%] Building C object src/CMakeFiles/libavrdude.dir/wiring.c.o
[ 90%] Building C object src/CMakeFiles/libavrdude.dir/xbee.c.o
[ 92%] Building C object src/CMakeFiles/libavrdude.dir/__/lexer.c.o
[ 93%] Building C object src/CMakeFiles/libavrdude.dir/__/config_gram.c.o
[ 94%] Linking C static library libavrdude.a
[ 94%] Built target libavrdude
[ 96%] Building C object src/CMakeFiles/avrdude.dir/main.c.o
[ 97%] Building C object src/CMakeFiles/avrdude.dir/developer_opts.c.o
[ 98%] Building C object src/CMakeFiles/avrdude.dir/whereami.c.o
[100%] Linking C executable avrdude
[100%] Built target avrdude

Build succeeded.

Run

sudo cmake --build build_dragonfly --target install

to install.

mcuee@dragonflybsdvm:~/build/avrdude % git diff
mcuee@dragonflybsdvm:~/build/avrdude % sudo cmake --build build_dragonfly --target install
Password:
[  1%] Built target conf
[ 94%] Built target libavrdude
[100%] Built target avrdude
Install the project...
-- Install configuration: "RelWithDebInfo"
-- Installing: /usr/local/bin/avrdude
-- Set runtime path of "/usr/local/bin/avrdude" to ""
-- Installing: /usr/local/lib/libavrdude.a
-- Installing: /usr/local/include/libavrdude.h
-- Installing: /usr/local/etc/avrdude.conf
-- Installing: /usr/local/share/man/man1/avrdude.1
mcuee@dragonflybsdvm:~/build/avrdude % avrdude
Usage: avrdude [options]
Options:
  -p <partno>            Specify AVR device; -p ? lists all known parts
  -p <wildcard>/<flags>  Run developer options for matched AVR devices,
                         e.g., -p ATmega328P/s or /S for part definition
  -b <baudrate>          Override RS-232 baud rate
  -B <bitclock>          Specify bit clock period (us)
  -C <config-file>       Specify location of configuration file
  -C +<config-file>      Specify additional config file, can be repeated
  -N                     Do not load config file
  -c <programmer>        Specify programmer; -c ? and -c ?type list all
  -c <wildcard>/<flags>  Run developer options for matched programmers,
                         e.g., -c 'ur*'/s for programmer info/definition
  -A                     Disable trailing-0xff removal for file/AVR read
  -D                     Disable auto erase for flash memory; implies -A
  -i <delay>             ISP Clock Delay [in microseconds]
  -P <port>              Connection; -P ?s or -P ?sa lists serial ones
  -r                     Reconnect to -P port after "touching" it; wait
                         400 ms for each -r; needed for some USB boards
  -F                     Override invalid signature or initial checks
  -e                     Perform a chip erase
  -O                     Perform RC oscillator calibration (see AVR053)
  -t                     Run an interactive terminal when it is its turn
  -T <terminal cmd line> Run terminal line when it is its turn
  -U <memstr>:r|w|v:<filename>[:format]
                         Carry out memory operation when it is its turn
                         Multiple -t, -T and -U options can be specified
  -n                     Do not write to the device whilst processing -U
  -V                     Do not automatically verify during -U
  -E <exitsp>[,<exitsp>] List programmer exit specifications
  -x <extended_param>    Pass <extended_param> to programmer, see -xhelp
  -v                     Verbose output; -v -v for more
  -q                     Quell progress output; -q -q for less
  -l logfile             Use logfile rather than stderr for diagnostics
  -?                     Display this usage

avrdude version 7.2-20230720, https://github.com/avrdudes/avrdude

mcuee@dragonflybsdvm:~/build/avrdude % head /usr/local/etc/avrdude.conf
# $Id$ -*- text -*-
#
# AVRDUDE Configuration File
#

avrdude_conf_version = "7.2-20240201 (571a8063)";

# This file contains AVRDUDE's default configuration data describing
# programming hardware pinouts and part definitions. Normally, it
# requires AVRDUDE be of the same or higher version than above string

[mcuee]

Hmm, I can not get it build with a fresh git checkout.

mcuee@dragonflybsdvm:~/build % git clone https://github.com/avrdudes/avrdude.git
Cloning into 'avrdude'...
remote: Enumerating objects: 19848, done.
remote: Counting objects: 100% (343/343), done.
remote: Compressing objects: 100% (187/187), done.
remote: Total 19848 (delta 182), reused 302 (delta 154), pack-reused 19505
Receiving objects: 100% (19848/19848), 11.59 MiB | 15.14 MiB/s, done.
Resolving deltas: 100% (14307/14307), done.
mcuee@dragonflybsdvm:~/build % cd avrdude
mcuee@dragonflybsdvm:~/build/avrdude % ./build.sh
-- The C compiler identification is GNU 8.3.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Git: /usr/local/bin/git (found version "2.41.0")
-- Found FLEX: /usr/bin/flex (found version "2.6.4")
-- Found BISON: /usr/local/bin/bison (found version "3.8.2")
-- Looking for libelf.h
-- Looking for libelf.h - not found
-- Looking for libelf/libelf.h
-- Looking for libelf/libelf.h - not found
-- Looking for usb.h
-- Looking for usb.h - found
-- Looking for lusb0_usb.h
-- Looking for lusb0_usb.h - not found
-- Looking for libusb.h
-- Looking for libusb.h - found
-- Looking for libusb-1.0/libusb.h
-- Looking for libusb-1.0/libusb.h - not found
-- Looking for hidapi/hidapi.h
-- Looking for hidapi/hidapi.h - not found
-- Looking for ftdi_tcioflush
-- Looking for ftdi_tcioflush - not found
-- Configuration summary:
-- ----------------------
-- DO HAVE    libelf
-- DO HAVE    libusb
-- DON'T HAVE libusb_1_0
-- DO HAVE    libhidapi
-- DO HAVE    libftdi (but prefer to use libftdi1)
-- DO HAVE    libftdi1
-- DO HAVE    libreadline
-- DO HAVE    libserialport
-- DISABLED   doc
-- DISABLED   parport
-- DISABLED   linuxgpio
-- DISABLED   linuxspi
-- ----------------------
-- Configuring done (0.7s)
-- Generating done (0.0s)
-- Build files have been written to: /home/mcuee/build/avrdude/build_dragonfly
[  1%] Generating avrdude.conf
[  1%] Built target conf
[  2%] [FLEX][Parser] Building scanner with flex 2.6.4
[  3%] [BISON][Parser] Building parser with bison 3.8.2
[  5%] Building C object src/CMakeFiles/libavrdude.dir/arduino.c.o
[  6%] Building C object src/CMakeFiles/libavrdude.dir/avr.c.o
[  7%] Building C object src/CMakeFiles/libavrdude.dir/avr910.c.o
[  9%] Building C object src/CMakeFiles/libavrdude.dir/avrcache.c.o
[ 10%] Building C object src/CMakeFiles/libavrdude.dir/avrftdi.c.o
In file included from /home/mcuee/build/avrdude/src/avrftdi.c:42:
/home/mcuee/build/avrdude/src/avrftdi_private.h:16:10: fatal error: ftdi.h: No such file or directory
 #include <ftdi.h>
          ^~~~~~~~
compilation terminated.
gmake[2]: *** [src/CMakeFiles/libavrdude.dir/build.make:143: src/CMakeFiles/libavrdude.dir/avrftdi.c.o] Error 1
gmake[1]: *** [CMakeFiles/Makefile2:128: src/CMakeFiles/libavrdude.dir/all] Error 2
gmake: *** [Makefile:136: all] Error 2
Build failed.

Applying the following patch does not help.

mcuee@dragonflybsdvm:~/build/avrdude % git diff
diff --git a/CMakeLists.txt b/CMakeLists.txt
index bde9304b..58735422 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -163,7 +163,7 @@ if(HAVE_LIBUSB_1_0)
 endif()

 # FreeBSD's library 'libusb' supports both the libusb-0.1 and libusb-1.0 API.
-if (HAVE_LIBUSB AND CMAKE_SYSTEM_NAME STREQUAL "FreeBSD")
+if (HAVE_LIBUSB AND CMAKE_SYSTEM_NAME STREQUAL "FreeBSD|DragonFly")
     set(HAVE_LIBUSB_1_0 ${HAVE_LIBUSB})
 endif()

[mcuee]

@stefanrueger and @MCUdude
#1656 (comment)

You can see that I have produce an avrdude executable with the version listed as avrdude version 7.2-20230720 but the version of avrdude.conf is correct. This time it is under DragonFly BSD.

I have ecountered same issue with MSYS2 mingw64 build but I can always sorted out the issue by deleting the git repo and carry out the building process again.

This time it is different as I can not build with a fresh checkout. Strange.

[mcuee]

Assuming the successful build is correct, it does not seem to work well with the tests. So maybe there are deeper problems.

mcuee@dragonflybsdvm:~/build/avrdude/tools % ldd /usr/local/bin/avrdude
/usr/local/bin/avrdude:
        libm.so.4 => /lib/libm.so.4 (0x8008a5000)
        libelf.so.0 => /usr/local/lib/libelf.so.0 (0x800698000)
        libusb.so.2 => /usr/lib/libusb.so.2 (0x800ad0000)
        libhidapi.so.0 => /usr/local/lib/libhidapi.so.0 (0x8006ad000)
        libftdi.so.1 => /usr/local/lib/libftdi.so.1 (0x8006b6000)
        libftdi1.so.2 => /usr/local/lib/libftdi1.so.2 (0x8006bd000)
        libreadline.so.8 => /usr/local/lib/libreadline.so.8 (0x8006cb000)
        libserialport.so.0 => /usr/local/lib/libserialport.so.0 (0x800723000)
        libncurses.so.6 => /usr/local/lib/libncurses.so.6 (0x800730000)
        libc.so.8 => /lib/libc.so.8 (0x800ce2000)
        libintl.so.8 => /usr/local/lib/libintl.so.8 (0x80076b000)
        libpthread.so.0 => /usr/lib/libpthread.so.0 (0x801040000)
        libiconv.so.2 => /usr/local/lib/libiconv.so.2 (0x800780000)
        libtinfo.so.6 => /usr/local/lib/libtinfo.so.6 (0x80125a000)

mcuee@dragonflybsdvm:~/build/avrdude/tools % head /usr/local/etc/avrdude.conf
# $Id$ -*- text -*-
#
# AVRDUDE Configuration File
#

avrdude_conf_version = "7.2-20240201 (571a8063)";

# This file contains AVRDUDE's default configuration data describing
# programming hardware pinouts and part definitions. Normally, it
# requires AVRDUDE be of the same or higher version than above string.

mcuee@dragonflybsdvm:~/build/avrdude/tools % ./test-avrdude -p "-c dryrun -p m4809"
Testing avrdude version 7.2-20230720
Prepare "-c dryrun -p m4809" and press 'enter' or 'space' to continue. Press any other key to skip
❌   0.102 s: fuse access: clear, set and read eesave fuse bit (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "config eesave=0; config eesave=1; config eesave"
❌   0.100 s: fuse access: set eesave fusebit to delete EEPROM on chip erase (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "config eesave=ee*erased"
✅   0.105 s: chip erase
✅   0.103 s: flash -U write/verify holes_rjmp_loops_49152B.hex
❌   0.105 s: flash -T write/verify holes_rjmp_loops_49152B.hex (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "write flash ./test_files/holes_rjmp_loops_49152B.hex:a"
❌   0.117 s: flash -T write/verify rjmp_loops_for_bootloaders_49152B.hex (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "write flash ./test_files/rjmp_loops_for_bootloaders_49152B.hex:a"
✅   0.096 s: eeprom check whether programmer can flip 0s to 1s
✅   0.102 s: eeprom -U write/verify holes_pack_my_box_256B.hex
❌   0.097 s: eeprom -T write/verify holes_{the_five_boxing_wizards,pack_my_box}_256B.hex (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "write eeprom ./test_files/holes_the_five_boxing_wizards_256B.hex:a" -T flush -T "write eeprom ./test_files/holes_pack_my_box_256B.hex:a"
❌   0.101 s: eeprom -T write/verify lorem_ipsum_256B.srec (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "write eeprom ./test_files/lorem_ipsum_256B.srec:a"
✅   0.111 s: chip erase and spot check flash is actually erased
✅   0.116 s: spot check eeprom is erased, too
❌   0.117 s: usersig -T/-U write/read random_data_64B.bin (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "erase usersig; write usersig ./test_files/random_data_64B.bin" -T flush -U usersig:r:/tmp/test-avrdude.tmp.L8gokN:r -U usersig:v:/tmp/test-avrdude.tmp.L8gokN:r -T "erase usersig" -T flush -U usersig:v:./test_files/0xff_64B.hex:i

One or more AVRDUDE "-c dryrun -p m4809" tests failed. Do you want to retry this particular test? (y/n): n

[mcuee]

BTW, DragonFly BSD 6.4 has avrdude 7.1, it does not support hidapi and libserialport.

mcuee@dragonflybsdvm:~/build/avrdude_bin % ldd ./avrdude71
./avrdude71:
        libm.so.4 => /lib/libm.so.4 (0x80071b000)
        libusb.so.2 => /usr/lib/libusb.so.2 (0x800946000)
        libftdi1.so.2 => /usr/local/lib/libftdi1.so.2 (0x80050e000)
        libreadline.so.8 => /usr/local/lib/libreadline.so.8 (0x80051c000)
        libc.so.8 => /lib/libc.so.8 (0x800b58000)
        libpthread.so.0 => /usr/lib/libpthread.so.0 (0x800eb6000)
        libncurses.so.6 => /usr/local/lib/libncurses.so.6 (0x800574000)
        libtinfo.so.6 => /usr/local/lib/libtinfo.so.6 (0x8005af000)

[mcuee]

Move this to discussion for now. We may have to rely on people who are interested to help out.

[mcuee]

https://github.com/DragonFlyBSD/DPorts/tree/master/devel/avrdude

avrdude 7.2 Makefile is there.

[mcuee]

Close this one as it is not planned until someone is actibely working on this issue.

This issue is also linked here.
#1710