Accessing AMT

[quizhead]

Hi,
How can I access the AMT from the Mesh?
I am able to access via Mesh Command.
Thanks.

[si458]

I'm not sure what the red warning says, but it's either invalid credentials or no credentials
So you need to click the blue download icon and enter the devices amt login details

[quizhead]

I understand offcourse, and it's not critical as I can manage the AMT with the Commander and it would be a nice to have also in the Mesh.

[si458]

@quizhead I think ur issue is because the host in the picture is linux, and I remember an issue somewhere to do with meshcentral couldn't control with Linux machines correctly? If I had another amt device to test I would do! But I only have 2 and they are both windows and don't want to format them and confuse meshcentral

[mtran-88]

Hi Si458, I appreciate you trying to help. It looks like you are the only one responding to the questions. I am putting a how to guide for myself, and if I get all of the AMT set up properly, I can share that with the community when done. Of course, that is assuming I can get all of the AMT stuff going. ;O) I can also help answers questions here with what I know so that you are not the only one.

[si458]

@mtran-88 that's perfectly fine! We do have some docs/videos for amt, but no step by step instructions! https://ylianst.github.io/MeshCentral/intelamt/

[mtran-88]

Hi, I am going through all of it again since I could not get the AMT set up on the second NUC. I am hoping that going through it again would shed some light on the steps that is required for getting AMT to show up.