Not seeing Memory Controller after programming

[vaniaprkl]

Hi,

I got to the step where I programmed in open-nic-shell targeting a U50 device. After a cold reboot I am not seeing a memory controller as the steps show:

I have a u50 which has just one port and get this running the commands above:

don@machine:~$ sudo lspci -d 10ee:
04:00.0 Network controller: Xilinx Corporation Device 903f
06:00.0 Signal processing controller: Xilinx Corporation Device f401
don@machine:~$ sudo lspci -td 10ee:
don@machine:~$ 

The device 04:00.0 had disappeared after the flash and reappeared after a cold reboot

04:00.0 Network controller: Xilinx Corporation Device 903f
	Subsystem: Xilinx Corporation Device 0007
	Physical Slot: 3
	Flags: fast devsel, IRQ 5, NUMA node 0
	Memory at c5800000 (64-bit, non-prefetchable) [disabled] [size=256K]
	Memory at c5400000 (64-bit, non-prefetchable) [disabled] [size=4M]
	Capabilities: [40] Power Management version 3
	Capabilities: [60] MSI-X: Enable- Count=10 Masked-
	Capabilities: [70] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [1c0] Secondary PCI Express
	Capabilities: [1f0] Virtual Channel

Am I doing something wrong? Any help or guidance is appreciated. Thanks in advance !!