dropping speedify connections in 0.99.9 on slate #115
Replies: 10 comments 22 replies
-
|
Was the metric set for the wireless connection? |
Beta Was this translation helpful? Give feedback.
-
|
So I reinstalled 0.99.9 with a metric of 120 for wwan via UBOOT to make sure it was a clean install. For a while both connections were OK. Upon a reboot, only the wwan connection was there, the dsl ethernet connection did not show up in speedify at all. In network>interfaces, PORTONE has the error message: "Error: Unknown error (DEVICE_CLAIM_FAILED)" root@SmoothWAN: rebooting a number of times, the ethernet connection is there sometimes with: I also tried a metic of 120 for PORTONE and also for LAN with no difference. Also, sometimes the wireless connection does not connect instead of the ethernet connection. Below are system and kernel logs |
Beta Was this translation helpful? Give feedback.
-
|
Yeah something is wrong with the init scripts from Engarde or TinyFEC when Speedify init script disables them. |
Beta Was this translation helpful? Give feedback.
-
|
still no luck, now it only stays connected to the wifi source for a couple of seconds. |
Beta Was this translation helpful? Give feedback.
-
|
Do the following in terminal just to make sure: The reboot |
Beta Was this translation helpful? Give feedback.
-
|
still does not work. Did a fresh install, only speedify enabled, did modifications you recommended, tried both 10 and 120 metrics |
Beta Was this translation helpful? Give feedback.
-
|
Issues seems to be similar to this: openwrt/openwrt#7795 (comment) when using Wi-Fi clients |
Beta Was this translation helpful? Give feedback.
-
|
Are you using auto channel? |
Beta Was this translation helpful? Give feedback.
-
|
yes |
Beta Was this translation helpful? Give feedback.
-
|
Got some time to test, try this: Restart. |
Beta Was this translation helpful? Give feedback.
-
|
no change |
Beta Was this translation helpful? Give feedback.
-
|
yes
From: Talal ***@***.***>
Sent: Saturday, February 25, 2023 9:23 PM
To: SmoothWAN/SmoothWAN ***@***.***>
Cc: meassick ***@***.***>; Author ***@***.***>
Subject: Re: [SmoothWAN/SmoothWAN] dropping speedify connections in 0.99.9 on slate (Discussion #115)
Are you using auto channel?
—
Reply to this email directly, view it on GitHub<https://github.com/orgs/SmoothWAN/discussions/115#discussioncomment-5111914>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A5YJJXIDIEJTPVL2PI737GLWZLECPANCNFSM6AAAAAAVHTMINI>.
You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>>
|
Beta Was this translation helpful? Give feedback.
-
|
yes |
Beta Was this translation helpful? Give feedback.
-
|
No change
From: Talal ***@***.***>
Sent: Sunday, February 26, 2023 8:59 AM
To: SmoothWAN/SmoothWAN ***@***.***>
Cc: meassick ***@***.***>; Author ***@***.***>
Subject: Re: [SmoothWAN/SmoothWAN] dropping speedify connections in 0.99.9 on slate (Discussion #115)
Got some time to test, try this:
cd /etc/hotplug.d/net/
rm macs
mv 00-rename 30-rename
Restart.
—
Reply to this email directly, view it on GitHub<https://github.com/orgs/SmoothWAN/discussions/115#discussioncomment-5114665>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A5YJJXOLYI5U4H2WFIYAN4TWZNVURANCNFSM6AAAAAAVHTMINI>.
You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>>
|
Beta Was this translation helpful? Give feedback.
-
|
Also, it seems that the terminal interface automatically logs out after a number of seconds. This was not the case in 0.99.8
|
Beta Was this translation helpful? Give feedback.
-
|
I tried various off/on delays in the startup file which do not make a difference:
sleep 20 &
wifi down radio0 &
wifi down radio1 &
sleep 10 &
wifi up radio0 &
sleep 2 &
wifi up radio1 &
sleep 10 &
ubus call network.interface.PortOne down &
ubus call network.interface.PortTwo down &
sleep 10 &
ubus call network.interface.PortOne up &
sleep 2 &
ubus call network.interface.PortTwo up &
From: Talal ***@***.***>
Sent: Saturday, February 25, 2023 9:20 PM
To: SmoothWAN/SmoothWAN ***@***.***>
Cc: meassick ***@***.***>; Author ***@***.***>
Subject: Re: [SmoothWAN/SmoothWAN] dropping speedify connections in 0.99.9 on slate (Discussion #115)
Issues seems to be similar to this: openwrt/openwrt#7795 (comment)<openwrt/openwrt#7795 (comment)> when using Wi-Fi clients
—
Reply to this email directly, view it on GitHub<https://github.com/orgs/SmoothWAN/discussions/115#discussioncomment-5111904>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A5YJJXNIMWABD7YIPVXRDDTWZLDWVANCNFSM6AAAAAAVHTMINI>.
You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>>
|
Beta Was this translation helpful? Give feedback.
-
|
Not sure of how to replicate your issue without the configuration files. |
Beta Was this translation helpful? Give feedback.
-
|
attached are the system and kernel logs and also the configuration that I exported. |
Beta Was this translation helpful? Give feedback.
-
|
Released a new hotfix, check it out. |
Beta Was this translation helpful? Give feedback.
-
|
Hot Fix 3 seems to be working. I have tried both Tailscale and Zerotier and both seem to function correctly. I will keep an eye out to see if there are memory leaks. |
Beta Was this translation helpful? Give feedback.
-
|
HTTPS disabled in latest release (0.99.9HF4) which fixes most issues includding TTYD |
Beta Was this translation helpful? Give feedback.
-
|
Im currently facing an issue with Github, reuploading the file, seems to be GH service down. |
Beta Was this translation helpful? Give feedback.
-
|
Uploaded files seem to be visible now. |
Beta Was this translation helpful? Give feedback.
-
|
Ok so the visible file is the outdated one, I'm not sure of what's happening with Github, re-uploading again, these are the proper checksums: |
Beta Was this translation helpful? Give feedback.
-
|
Yes, both the Slate and Flint versions are there now
From: Talal ***@***.***>
Sent: Monday, March 6, 2023 5:29 PM
To: SmoothWAN/SmoothWAN ***@***.***>
Cc: meassick ***@***.***>; Author ***@***.***>
Subject: Re: [SmoothWAN/SmoothWAN] dropping speedify connections in 0.99.9 on slate (Discussion #115)
Uploaded files seem to be visible now.
—
Reply to this email directly, view it on GitHub<https://github.com/orgs/SmoothWAN/discussions/115#discussioncomment-5221488>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A5YJJXPB3LHA56HAYNJ6VSTW2ZXMTANCNFSM6AAAAAAVHTMINI>.
You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>>
|
Beta Was this translation helpful? Give feedback.
-
I have an ethernet connection and a wireless connection being combined in Speedify. This seems to work just fine in version 0.99.8 which seems very stable. However in version 0.99.9 invariably one of the two connections will disconnect and be greyed out in the status window after a period of time. I have re-installed the firmware from scratch and it makes no difference. If I use only one or the other connection, it stays connected to that single connection.
Beta Was this translation helpful? Give feedback.
All reactions