Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

[Page No Found] Report the wiki page that you find it disappeared #449

Open
MatthewJeffson opened this issue Jul 25, 2023 · 38 comments · Fixed by #476 or #480
Open

[Page No Found] Report the wiki page that you find it disappeared #449

MatthewJeffson opened this issue Jul 25, 2023 · 38 comments · Fixed by #476 or #480
Assignees
@MatthewJeffson
Labels
ongoing This assignment is still ongoing Welcome to join us!

Comments

@MatthewJeffson
Copy link
Collaborator

The change of wiki platform caused us to lose some pages

  • Due to the transition to a new wiki platform, we unfortunately experienced some loss of pages.
  • We apologize for any inconvenience this may have caused and appreciate your patience as we continue to improve and optimize our wiki platform.
  • We have been working diligently to recreate and restore as much content as possible.

Please let us know what pages you faced is disappeared.
@MatthewJeffson MatthewJeffson added Welcome to join us! ongoing This assignment is still ongoing labels Jul 25, 2023
@MatthewJeffson MatthewJeffson self-assigned this Jul 25, 2023
@MatthewJeffson MatthewJeffson changed the title [Page No Found Report] Report the wiki page that you find it disappeared [Page No Foun] Report the wiki page that you find it disappeared Jul 25, 2023
@MatthewJeffson MatthewJeffson changed the title [Page No Foun] Report the wiki page that you find it disappeared [Page No Found] Report the wiki page that you find it disappeared Jul 25, 2023
@Eee14
Copy link

Eee14 commented Jul 29, 2023

I found two 404s at https://wiki.seeedstudio.com/get_start_round_display/#arduino-library-overview ：
https://www.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-tft-library
https://www.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-lvgl-library

@MatthewJeffson
Copy link
Collaborator Author

I found two 404s at https://wiki.seeedstudio.com/get_start_round_display/#arduino-library-overview ： https://www.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-tft-library https://www.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-lvgl-library

Hello, the urls should be :
https://wiki.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-tft-library
and
https://wiki.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-lvgl-library
Sorry for such late reply and the inconvenience

@MatthewJeffson MatthewJeffson linked a pull request Aug 2, 2023 that will close this issue
page not found && recomputer page software #476
Merged
@MatthewJeffson MatthewJeffson reopened this Aug 2, 2023
@gregwa1953
Copy link

gregwa1953 commented Aug 6, 2023 •
edited

I was looking for the Ardupy Getting Started page - https://wiki.seeedstudio.com/ArduPy/
Ended up with PAGE not found.

Plus the pip3 install for Ardupy fails, at least on my version of Python 3.11.1.
I don't know where else to report it.

@MatthewJeffson MatthewJeffson linked a pull request Aug 7, 2023 that will close this issue
Add: add Wio Terminal ArduPy wiki #480
Merged
@MatthewJeffson
Copy link
Collaborator Author

Hi, thank you for the report and the wiki page has been updated. https://wiki.seeedstudio.com/ArduPy/
Really appreciate!

@AlvaroHermida
Copy link

AlvaroHermida commented Aug 11, 2023 •
edited

Everything SenseCAP related fails with this error. Is SenseCAP abandoned already?

Just two critical errors as an example:

  • In the default firmware: the "Set API Key" QR fails, destroying all the subsequent functionality.

Image

  • In the package

Image

, printed on the back, over the text "Get Started", suggesting the user "you did it again, you bought another expensive brick (dead platform)"

Maybe a third error is also printed on the back, over the text "Buy Product". In this case, the error is the fact that the page works, letting you buy a dead platform (if this is the case).

@MatthewJeffson
Copy link
Collaborator Author

Hi! I'm sorry for your bad experience using the board. We have the tech support platforms specific for SenseCAP and you can find them under the pages of SenseCAP products.
Would you mind creating an issue ticket on the SenseCAP Help Center and our experts will help you with it.
Thanks!
image

@holdenweb
Copy link

holdenweb commented Aug 11, 2023 •
edited

I was looking at your Grove Starter kit (with a view to buying six for an upcoming workshop) on.
https://coolcomponents.co.uk/products/grove-starter-kit-for-raspberry-pi-pico

The documentation link on that page to https://wiki.seeedstudio.com/Grove_Shield_for_Pi_Pico_V1.0/ is broken. I believe it should point to https://wiki.seeedstudio.com/Grove-Starter-Kit-for-Raspberry-Pi-Pico/.

Now I've read the Wiki page I'm off to purchase those six I wanted - it looks like an excellent MicroPython teaching resource.

I also see this is a link fro a reseller, so I'll contact the direct leaving the issue here so I can link to it.

@MatthewJeffson
Copy link
Collaborator Author

Thank you for your interests in our products! And I really appreciate you report it on the GitHub.
I will find a solution to solve it.

@AlvaroHermida
Copy link

AlvaroHermida commented Aug 12, 2023 •
edited

Hi! I'm sorry for your bad experience using the board. We have the tech support platforms specific for SenseCAP and you can find them under the pages of SenseCAP products. Would you mind creating an issue ticket on the [SenseCAP Help Center]

Sorry, wrong answer.

I'm not reporting an issue of SenseCAP: Both broken urls are being correctly called from the firmware and from the printed package (please, note you cannot ask users to "edit the package" to cover a web administration bug).

Both broken links redirect here asking to report, so the "new platform" can be patched to solve the errors caused by the wrong implementation of the "new platform".

photo_2023-08-12_14-56-38

...And you asked for this reports:

... we unfortunately experienced some loss of pages.
...
We have been working diligently to recreate and restore as much content as possible.
Please let us know what pages you faced is disappeared.

The two urls whose functionality must be restored (without ruling out more errors) are the following:

  1. https://wiki.seeedstudio.com/Sensor/SenseCAP/SenseCAP_Indicator/Set_An_API_Key/
  2. https://wiki.seeedstudio.com/Sensor/SenseCAP/SenseCAP_Indicator/Get_started_with_SenseCAP_Indicator/

Thanks.

@MatthewJeffson
Copy link
Collaborator Author

MatthewJeffson commented Aug 12, 2023 •
edited

The two urls whose functionality must be restored (without ruling out more errors) are the following:

  1. https://wiki.seeedstudio.com/Sensor/SenseCAP/SenseCAP_Indicator/Set_An_API_Key/
  2. https://wiki.seeedstudio.com/Sensor/SenseCAP/SenseCAP_Indicator/Get_started_with_SenseCAP_Indicator/

Thanks.

Oh sorry I misunderstood you before. The correct addresses I think should be:

  1. https://wiki.seeedstudio.com/SenseCAP_Indicator_How_to_Set_the_API_Key/
  2. https://wiki.seeedstudio.com/SenseCAP_Indicator_Get_Started/

I will contact my colleagues to make sure the QR code negative the right addresses.
Thank you! Really appreciate!

@AMInnovationTeam
Copy link

Missing: https://wiki.seeedstudio.com/reComputer_Jetson_Series_Started_Guide/

Link is mentioned under the wiki hyperlink on https://www.seeedstudio.com/Jetson-10-1-H0-p-5335.html

@MatthewJeffson
Copy link
Collaborator Author

Hi! @AMInnovationTeam Thanks for pointing it out. I really appreciate it!
The page has been changed to this: https://wiki.seeedstudio.com/NVIDIA_Jetson/ (I thought I got it all out, guess not:D)
Anyway, thanks! I will convert it soon.
Best Regards,
Matthew

@AMInnovationTeam
Copy link

Hi @MatthewJeffson, thank you for the quick response.
Another broken one I just found: https://wiki.seeedstudio.com/Flash_System_on_SD_card/

This is mentioned near the bottom of this page under the "Flash System on SD card" hyperlink: https://wiki.seeedstudio.com/reComputer_J1020_A206_Flash_JetPack/

@MatthewJeffson
Copy link
Collaborator Author

Sure~ I will take care of it!
Thanks! @AMInnovationTeam

@tak5633
Copy link

tak5633 commented Oct 4, 2023

Hi. I just came across this broken link: https://wiki.seeedstudio.com/Tutorial-of-A20X-Carrier-Boards/

@MatthewJeffson
Copy link
Collaborator Author

Hi @tak5633 ! Thanks for pointing it out! Are you using the reComputer J1020v1? which is built around the A206 carrier board. And the new link will be https://wiki.seeedstudio.com/reComputer_J1020_A206_Flash_JetPack/.
Or you can find much more information at the index page.
I have seen three places that include the broken links, thanks again.

@tak5633
Copy link

tak5633 commented Oct 5, 2023

Hi @MatthewJeffson! Thanks for the response. I'm actually using the reComputer J1020v2 built around the J202 carrier board. I found this link a little while after posting my message: https://wiki.seeedstudio.com/reComputer_J2021_J202_Flash_Jetpack/. That has been very helpful so far.

@Wlpeout
Copy link

Wlpeout commented Oct 12, 2023

From page https://www.seeedstudio.com/Grove-Shield-for-Seeeduino-XIAO-p-4621.html?queryID=99f5176f13bc8d35d94ec6d6ce80a04a&objectID=4621&indexName=bazaar_retailer_products

Link https://wiki.seeedstudio.com/Grove/

Page Not Found

@MatthewJeffson
Copy link
Collaborator Author

MatthewJeffson commented Oct 12, 2023 •
edited

Hi! @Wlpeout Thank you for pointing it out and the page I think have been converted into this: https://wiki.seeedstudio.com/Grove_System/

The contents are kind of old and we are looking for someone who have the ability to update it.
Anyway, I will make the link right and thanks again!
Best Regards,
Matthew

@Wlpeout
Copy link

Wlpeout commented Oct 12, 2023 via email

@BobKerns
Copy link

https://wiki.seeedstudio.com/ArduPy-LCD/, linked from https://wiki.seeedstudio.com/ArduPy/

@BobKerns
Copy link

BobKerns commented Nov 16, 2023 •
edited

https://wiki.seeedstudio.com/ArduPy-Libraries/, linked from https://www.seeedstudio.com/blog/2020/10/28/circuitpython-vs-ardupy-which-is-better-for-micropython-microcontroller-programming-m/

@MatthewJeffson
Copy link
Collaborator Author

Thank you! Bob! @BobKerns
The urls have been fixed.
Best Regards,
Matthew

@aquacalc
Copy link

aquacalc commented Dec 20, 2023 •
edited

Page not found when hit the "Seeed Gas Sensor Selection Guide" link under "Tip" callout found on this page:

https://wiki.seeedstudio.com/Grove-Multichannel-Gas-Sensor-V2/

@AMInnovationTeam
Copy link

Missing: https://wiki.seeedstudio.com/install_NVIDIA_software_to_Jetson-10-1-A0/

Link is mentioned in the aqua coloured "Note" panel in the line "Please check our wiki for reflashing Jetpack and expandinging storage." (also a typo too "expandinging" if you wanted to fix as well) on this page:
https://www.seeedstudio.com/Jetson-10-1-H0-p-5335.html

@MatthewJeffson
Copy link
Collaborator Author

MatthewJeffson commented Jan 3, 2024 •
edited

@aquacalc Oh, I'm sorry the page should be "https://wiki.seeedstudio.com/Seeed_Gas_Sensor_Selection_Guide/". I will change it soon.
Best Regards

@MatthewJeffson
Copy link
Collaborator Author

MatthewJeffson commented Jan 3, 2024 •
edited

Hi! @AMInnovationTeam Thank you for the notification! I will change it soon!
Best Regards

@AMInnovationTeam
Copy link

Hi! @AMInnovationTeam Thank you for the notification! I will change it soon! Best Regards

Thanks @MatthewJeffson! I checked the link and I think it was accidentally changed to instructions for the wrong module (links to instructions for J1010 instead of J1020v1).

I believe this is the correct link: https://wiki.seeedstudio.com/reComputer_J1020_A206_Flash_JetPack/

@MatthewJeffson
Copy link
Collaborator Author

Oh! @AMInnovationTeam Yes indeed it is the J1020 page, I will have it changed soon! Thanks!

@MatthewJeffson MatthewJeffson pinned this issue Feb 25, 2024
@acostach
Copy link

J2021 with Xavier NX re-flashing page is missing, link from https://www.seeedstudio.com/reComputer-J2021-p-5438.html takes to https://wiki.seeedstudio.com/Tutorial-of-A20X-Carrier-Boards/ I was interested in whether there's any changes needed before flashing standard Nvidia Jetpack or the J2021 is fully compatible with the devkit. Thank you

@MatthewJeffson
Copy link
Collaborator Author

Hello @acostach ! Thank you so much for providing the information. The real link should be: https://wiki.seeedstudio.com/reComputer_J2021_J202_Flash_Jetpack/

And we will change it very soon!
Best Regards,
Matthew

@acostach
Copy link

acostach commented Mar 4, 2024 •
edited

Thank you very much @MatthewJeffson ! Can you please confirm if the reComputer J2021 uses the J202 carrier board? So the J2021 is basically the same as J202 plus the enclosure and the Xavier NX module? To me it seems like so but I just want to double-confirm.

Thanks

@acostach
Copy link

acostach commented Mar 5, 2024

Hi @MatthewJeffson , I'd like to order some J202s and would appreciate if you could let me know where I should ask for the above confirmation? Thanks

@MatthewJeffson
Copy link
Collaborator Author

Oh, Hi, @acostach sorry I forgot to reply. And yes, the reComputer J2021 is the combination of J202 carrier board and Jetson Xavier NX 8GB module. You can find more information on the bazaar page, which supports more modules like: Jetson Nano/Xavier NX/TX2 NX.
Hope that's helpful.

@feiticeir0
Copy link
Contributor

feiticeir0 commented Apr 10, 2024 •
edited

I can't find the page from the Jetson devices application page that uses text-to-image LLM wiki.
Where is it ?

The page is there,
https://wiki.seeedstudio.com/How_to_run_local_llm_text_to_image_on_reComputer/

But there's no link to it from the main wiki page, nor from the Jetson related pages.

@MatthewJeffson
Copy link
Collaborator Author

Hello @feiticeir0 ! Since we updated the search engine, there might occur some errors. But the sidebar has been updated:) Thank you for the feedback!
Best Regards,
Matthew

@Ramraj5
Copy link

Ramraj5 commented May 22, 2024

I cannot access the Google Colab to this part "After we are done annotating the dataset, we need to train it. Jump to this part, which explains how to train an AI model using YOLOv5 running on Google Colab."

@MatthewJeffson
Copy link
Collaborator Author

Hi, @Ramraj5 I think there occurs some errors and the urls has been changed. For each this part, you can find them above a little bit. And here are these links correct:

Thanks for the noticing!
Matthew

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@MatthewJeffson MatthewJeffson

Labels
ongoing This assignment is still ongoing Welcome to join us!
Projects
Seeed Studio Wiki Platform Updates[Phase 1]
Status: In Progress
Milestone
No milestone