We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Hi
I have a problem I don't know how to solve. In this model https://cad.onshape.com/documents/c3f44096b0f5e4646ed48e3f/w/670467f68cac02b087631e3d/e/aa91522f7b6623958d10d37b?renderMode=0&uiState=631e3a4c38ae3c7ec87ec8db
I have two links going to the same block, but it seems like the software doesn't like it says it is already connected.
What can I do?
The text was updated successfully, but these errors were encountered:
Hello, There can't be loops in produced models currently.
However, as far as I understand your design, no loop seems needed, you could simply use a DoF only on one side of your mechanism, can't you?
Sorry, something went wrong.
No branches or pull requests
Hi
I have a problem I don't know how to solve.
In this model
https://cad.onshape.com/documents/c3f44096b0f5e4646ed48e3f/w/670467f68cac02b087631e3d/e/aa91522f7b6623958d10d37b?renderMode=0&uiState=631e3a4c38ae3c7ec87ec8db
I have two links going to the same block, but it seems like the software doesn't like it says it is already connected.
What can I do?
The text was updated successfully, but these errors were encountered: